| Message ID | 1380553986-15910-5-git-send-email-joelf@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Sep 30, 2013 at 04:13:01PM +0100, Joel Fernandes wrote: > From: "Mark A. Greer" <mgreer@animalcreek.com> > > Add the generic AM33XX AES module's device tree data and > enable it for the am335x-evm, am335x-evmsk, and am335x-bone > platforms. Also add Documentation file describing the data > for the AES module. > > [joelf@ti.com: Dropped interrupt-parent propert] > > CC: Paul Walmsley <paul@pwsan.com> > Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> > --- > .../devicetree/bindings/crypto/omap-aes.txt | 34 ++++++++++++++++++++++ > arch/arm/boot/dts/am335x-bone.dts | 4 +++ > arch/arm/boot/dts/am335x-evm.dts | 4 +++ > arch/arm/boot/dts/am335x-evmsk.dts | 4 +++ > arch/arm/boot/dts/am33xx.dtsi | 10 +++++++ > 5 files changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/crypto/omap-aes.txt > > diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt > new file mode 100644 > index 0000000..4bb1e27 > --- /dev/null > +++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt > @@ -0,0 +1,34 @@ > +OMAP SoC AES crypto Module > + > +Required properties: > + > +- compatible : Should contain entries for this and backward compatible > + AES versions: > + - "ti,omap2-aes" for OMAP2. > + - "ti,omap3-aes" for OMAP3. > + - "ti,omap4-aes" for OMAP4 and AM33XX. > + Note that the OMAP2 and 3 versions are compatible (OMAP3 supports > + more algorithms) but they are incompatible with OMAP4. > +- ti,hwmods: Name of the hwmod associated with the AES odule > +- reg : Offset and length of the register set for the module > +- interrupt-parent : the phandle for the interrupt controller that > + services interrupts for this module. > +- interrupts : the interrupt number for the AES odule. Similar comments to the SHAM module here: * s/interrupt number/interrupt-specifier/ * Drop interrupt-parent. * s/AES odule/AES module/ > + > +Optional properties: > +- dmas: DMA specifier for tx and rx dma. See the DMA client binding, > + Documentation/devicetree/bindings/dma/dma.txt s/DMA specifier/DMA specifiers/ > +- dma-names: DMA request names. Should be '"tx", "rx"' if dma is present. Nit: I'd prefer 'Should include "tx" and "rx" if present' -- I hope the driver's requesting these by name rather than relying on a specific ordering (it makes future expansion and optional components far easier to handle sanely). > + > +Example: > + /* AM335x */ > + aes: aes@53500000 { > + compatible = "ti,omap4-aes"; > + ti,hwmods = "aes"; > + reg = <0x53500000 0xa0>; > + interrupt-parent = <&intc>; > + interrupts = <102>; > + dmas = <&edma 6 > + &edma 5>; > + dma-names = "tx", "rx"; > + }; Minor nit, but for consistency could you bracket the DMAs individually: dmas = <&edma 6>, <&edma 5>; > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts > index 8a9802e..94ee427 100644 > --- a/arch/arm/boot/dts/am335x-bone.dts > +++ b/arch/arm/boot/dts/am335x-bone.dts > @@ -23,3 +23,7 @@ > &sham { > status = "okay"; > }; > + > +&aes { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > index d59e51c..86463fa 100644 > --- a/arch/arm/boot/dts/am335x-evm.dts > +++ b/arch/arm/boot/dts/am335x-evm.dts > @@ -526,3 +526,7 @@ > &sham { > status = "okay"; > }; > + > +&aes { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts > index d45a330..f577e65 100644 > --- a/arch/arm/boot/dts/am335x-evmsk.dts > +++ b/arch/arm/boot/dts/am335x-evmsk.dts > @@ -428,3 +428,7 @@ > &sham { > status = "okay"; > }; > + > +&aes { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 299710b..0daa1b2 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -719,5 +719,15 @@ > dmas = <&edma 36>; > dma-names = "rx"; > }; > + > + aes: aes@53500000 { > + compatible = "ti,omap4-aes"; > + ti,hwmods = "aes"; > + reg = <0x53500000 0xa0>; > + interrupts = <102>; > + dmas = <&edma 6 > + &edma 5>; Bracketing here too, please. Cheers, Mark. > + dma-names = "tx", "rx"; > + }; > }; > }; > -- > 1.8.1.2 > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
These patches were not authored by me but I'll go ahead and fix them up anyway. On 10/04/2013 09:33 AM, Mark Rutland wrote: > On Mon, Sep 30, 2013 at 04:13:01PM +0100, Joel Fernandes wrote: >> From: "Mark A. Greer" <mgreer@animalcreek.com> >> >> Add the generic AM33XX AES module's device tree data and >> enable it for the am335x-evm, am335x-evmsk, and am335x-bone >> platforms. Also add Documentation file describing the data >> for the AES module. >> >> [joelf@ti.com: Dropped interrupt-parent propert] >> >> CC: Paul Walmsley <paul@pwsan.com> >> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> >> --- >> .../devicetree/bindings/crypto/omap-aes.txt | 34 ++++++++++++++++++++++ >> arch/arm/boot/dts/am335x-bone.dts | 4 +++ >> arch/arm/boot/dts/am335x-evm.dts | 4 +++ >> arch/arm/boot/dts/am335x-evmsk.dts | 4 +++ >> arch/arm/boot/dts/am33xx.dtsi | 10 +++++++ >> 5 files changed, 56 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/crypto/omap-aes.txt >> >> diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt >> new file mode 100644 >> index 0000000..4bb1e27 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt >> @@ -0,0 +1,34 @@ >> +OMAP SoC AES crypto Module >> + >> +Required properties: >> + >> +- compatible : Should contain entries for this and backward compatible >> + AES versions: >> + - "ti,omap2-aes" for OMAP2. >> + - "ti,omap3-aes" for OMAP3. >> + - "ti,omap4-aes" for OMAP4 and AM33XX. >> + Note that the OMAP2 and 3 versions are compatible (OMAP3 supports >> + more algorithms) but they are incompatible with OMAP4. >> +- ti,hwmods: Name of the hwmod associated with the AES odule >> +- reg : Offset and length of the register set for the module >> +- interrupt-parent : the phandle for the interrupt controller that >> + services interrupts for this module. >> +- interrupts : the interrupt number for the AES odule. > > Similar comments to the SHAM module here: > > * s/interrupt number/interrupt-specifier/ > * Drop interrupt-parent. > * s/AES odule/AES module/ Ok, done. >> + >> +Optional properties: >> +- dmas: DMA specifier for tx and rx dma. See the DMA client binding, >> + Documentation/devicetree/bindings/dma/dma.txt > > s/DMA specifier/DMA specifiers/ > >> +- dma-names: DMA request names. Should be '"tx", "rx"' if dma is present. > > Nit: I'd prefer 'Should include "tx" and "rx" if present' -- I hope the Ok, changed to the same. > driver's requesting these by name rather than relying on a specific > ordering (it makes future expansion and optional components far easier > to handle sanely). Yes, that's the case. Its handled by name using the dma_request_slave_channel_compat API. >> + >> +Example: >> + /* AM335x */ >> + aes: aes@53500000 { >> + compatible = "ti,omap4-aes"; >> + ti,hwmods = "aes"; >> + reg = <0x53500000 0xa0>; >> + interrupt-parent = <&intc>; >> + interrupts = <102>; >> + dmas = <&edma 6 >> + &edma 5>; >> + dma-names = "tx", "rx"; >> + }; > > Minor nit, but for consistency could you bracket the DMAs individually: > > dmas = <&edma 6>, > <&edma 5>; Ok changed as above. > >> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts >> index 8a9802e..94ee427 100644 >> --- a/arch/arm/boot/dts/am335x-bone.dts >> +++ b/arch/arm/boot/dts/am335x-bone.dts >> @@ -23,3 +23,7 @@ >> &sham { >> status = "okay"; >> }; >> + >> +&aes { >> + status = "okay"; >> +}; >> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts >> index d59e51c..86463fa 100644 >> --- a/arch/arm/boot/dts/am335x-evm.dts >> +++ b/arch/arm/boot/dts/am335x-evm.dts >> @@ -526,3 +526,7 @@ >> &sham { >> status = "okay"; >> }; >> + >> +&aes { >> + status = "okay"; >> +}; >> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts >> index d45a330..f577e65 100644 >> --- a/arch/arm/boot/dts/am335x-evmsk.dts >> +++ b/arch/arm/boot/dts/am335x-evmsk.dts >> @@ -428,3 +428,7 @@ >> &sham { >> status = "okay"; >> }; >> + >> +&aes { >> + status = "okay"; >> +}; >> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi >> index 299710b..0daa1b2 100644 >> --- a/arch/arm/boot/dts/am33xx.dtsi >> +++ b/arch/arm/boot/dts/am33xx.dtsi >> @@ -719,5 +719,15 @@ >> dmas = <&edma 36>; >> dma-names = "rx"; >> }; >> + >> + aes: aes@53500000 { >> + compatible = "ti,omap4-aes"; >> + ti,hwmods = "aes"; >> + reg = <0x53500000 0xa0>; >> + interrupts = <102>; >> + dmas = <&edma 6 >> + &edma 5>; > > Bracketing here too, please. Done. Thanks, -Joel -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt new file mode 100644 index 0000000..4bb1e27 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt @@ -0,0 +1,34 @@ +OMAP SoC AES crypto Module + +Required properties: + +- compatible : Should contain entries for this and backward compatible + AES versions: + - "ti,omap2-aes" for OMAP2. + - "ti,omap3-aes" for OMAP3. + - "ti,omap4-aes" for OMAP4 and AM33XX. + Note that the OMAP2 and 3 versions are compatible (OMAP3 supports + more algorithms) but they are incompatible with OMAP4. +- ti,hwmods: Name of the hwmod associated with the AES odule +- reg : Offset and length of the register set for the module +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this module. +- interrupts : the interrupt number for the AES odule. + +Optional properties: +- dmas: DMA specifier for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names. Should be '"tx", "rx"' if dma is present. + +Example: + /* AM335x */ + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupt-parent = <&intc>; + interrupts = <102>; + dmas = <&edma 6 + &edma 5>; + dma-names = "tx", "rx"; + }; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 8a9802e..94ee427 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -23,3 +23,7 @@ &sham { status = "okay"; }; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d59e51c..86463fa 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -526,3 +526,7 @@ &sham { status = "okay"; }; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index d45a330..f577e65 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -428,3 +428,7 @@ &sham { status = "okay"; }; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 299710b..0daa1b2 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -719,5 +719,15 @@ dmas = <&edma 36>; dma-names = "rx"; }; + + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <102>; + dmas = <&edma 6 + &edma 5>; + dma-names = "tx", "rx"; + }; }; };