Message ID | 1381167144-18098-2-git-send-email-fabio.estevam@freescale.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Mon, Oct 07, 2013 at 02:32:24PM -0300, Fabio Estevam wrote: > According to Documentation/devicetree/bindings/mmc/mmc.txt: > > "Card detection: > If no property below is supplied, host native card detect is used. > Only one of the properties in this section should be supplied: > - broken-cd: There is no card detection available; polling must be used. > - cd-gpios: Specify GPIOs for card detection, see gpio binding > - non-removable: non-removable slot (like eMMC); assume always present. " > > So remove the custom fsl,cd-controller and fsl,wp-controller properties, as the > mmc core can take care of it. > > Tested on mx51babbage, mx53qsb boards and mx6qsabresd boards. > > Cc: Chris Ball <cjb@laptop.org> > Cc: <linux-mmc@vger.kernel.org> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt | 6 ------ > drivers/mmc/host/sdhci-esdhc-imx.c | 6 ------ > 2 files changed, 12 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt > index 1dd6225..5da8ab0 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt > @@ -9,18 +9,12 @@ by mmc.txt and the properties used by the sdhci-esdhc-imx driver. > Required properties: > - compatible : Should be "fsl,<chip>-esdhc" > > -Optional properties: > -- fsl,cd-controller : Indicate to use controller internal card detection > -- fsl,wp-controller : Indicate to use controller internal write protection > - > Examples: > > esdhc@70004000 { > compatible = "fsl,imx51-esdhc"; > reg = <0x70004000 0x4000>; > interrupts = <1>; > - fsl,cd-controller; > - fsl,wp-controller; > }; > > esdhc@70008000 { > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index b9899e9..07662d1 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -796,12 +796,6 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, > if (of_get_property(np, "non-removable", NULL)) > boarddata->cd_type = ESDHC_CD_PERMANENT; > > - if (of_get_property(np, "fsl,cd-controller", NULL)) > - boarddata->cd_type = ESDHC_CD_CONTROLLER; Without this removed, flag SDHCI_QUIRK_BROKEN_CARD_DETECTION will be kept for the host controller. Consequently, MMC_CAP_NEEDS_POLL is set, and we will use polling for card-detection. Shawn > - > - if (of_get_property(np, "fsl,wp-controller", NULL)) > - boarddata->wp_type = ESDHC_WP_CONTROLLER; > - > boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); > if (gpio_is_valid(boarddata->cd_gpio)) > boarddata->cd_type = ESDHC_CD_GPIO; > -- > 1.8.1.2 > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 1dd6225..5da8ab0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -9,18 +9,12 @@ by mmc.txt and the properties used by the sdhci-esdhc-imx driver. Required properties: - compatible : Should be "fsl,<chip>-esdhc" -Optional properties: -- fsl,cd-controller : Indicate to use controller internal card detection -- fsl,wp-controller : Indicate to use controller internal write protection - Examples: esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-controller; - fsl,wp-controller; }; esdhc@70008000 { diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index b9899e9..07662d1 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -796,12 +796,6 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, if (of_get_property(np, "non-removable", NULL)) boarddata->cd_type = ESDHC_CD_PERMANENT; - if (of_get_property(np, "fsl,cd-controller", NULL)) - boarddata->cd_type = ESDHC_CD_CONTROLLER; - - if (of_get_property(np, "fsl,wp-controller", NULL)) - boarddata->wp_type = ESDHC_WP_CONTROLLER; - boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); if (gpio_is_valid(boarddata->cd_gpio)) boarddata->cd_type = ESDHC_CD_GPIO;
According to Documentation/devicetree/bindings/mmc/mmc.txt: "Card detection: If no property below is supplied, host native card detect is used. Only one of the properties in this section should be supplied: - broken-cd: There is no card detection available; polling must be used. - cd-gpios: Specify GPIOs for card detection, see gpio binding - non-removable: non-removable slot (like eMMC); assume always present. " So remove the custom fsl,cd-controller and fsl,wp-controller properties, as the mmc core can take care of it. Tested on mx51babbage, mx53qsb boards and mx6qsabresd boards. Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt | 6 ------ drivers/mmc/host/sdhci-esdhc-imx.c | 6 ------ 2 files changed, 12 deletions(-)