| Message ID | 1378188001-22216-1-git-send-email-yuvaraj.cd@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Kukjin, Can you please take this patch to your tree? Best Regards Yuvaraj On Tue, Sep 3, 2013 at 11:30 AM, Yuvaraj Kumar C D <yuvaraj.cd@gmail.com> wrote: > This patch adds the mmc device tree node entries for exynos5420 SOC. > Exynos5420 has a different version of DWMMC controller,so a new > compatible string is used to distinguish it from the prior SOC's. > > This patch depends on > [1]mmc: dw_mmc: exynos: configure SMU in exynos5420 > [2]mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 > [3]mmc: dw_mmc: update binding document exynos-dw-mshc.txt > > changes since v6: > 1.renamed node name to mmc > 2.Used compatible string "samsung,exynos5420-dw-mshc" > for controller instance which does not have SMU. > 3.Used compatible string "samsung,exynos5420-dw-mshc-smu" > for controller instance which has SMU. > > changes since v5: > 1.removed instance index from node name. > 2.changed the node name to mshc. > 3.changed the reg property value for mshc_2. > > changes since v4: > 1.Droppped the bypass-smu binding property. > 2.Used compatible string "samsung,exynos5250-dw-mshc" > for controller instance which does not have SMU. > > changes since V3: > 1.change fifo-depth size from 0x80 to 0x40 > 2.Move the below properties > a.card-detect-delay > b.samsung,dw-mshc-ciu-div > c.samsung,dw-mshc-sdr-timing > d.samsung,dw-mshc-ddr-timing > from SOC dts to board dts file as suggested by Doug Anderson > > changes since V2: > 1.dropped num-slots property from node as its not required > if number of card slots available is 1. > > 2.Move the below properties > a.fifo-depth > b.card-detect-delay > c.samsung,dw-mshc-ciu-div > d.samsung,dw-mshc-sdr-timing > e.samsung,dw-mshc-ddr-timing > from board dts to SOC dts,as these are not board specific properties. > > 3.Updated the binding document exynos-dw-mshc.txt. > > changes since V1: > 1.disable node by status = disabled in SOC file > 2.enable node by status = okay in board specific file > > Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> > --- > .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 + > arch/arm/boot/dts/exynos5420-smdk5420.dts | 33 +++++++++++++++++ > arch/arm/boot/dts/exynos5420.dtsi | 39 ++++++++++++++++++++ > 3 files changed, 74 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > index 6d1c098..84cd56f 100644 > --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > @@ -16,6 +16,8 @@ Required Properties: > specific extensions. > - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 > specific extensions. > + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 > + specific extensions. > > * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface > unit (ciu) clock. This property is applicable only for Exynos5 SoC's and > diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts > index bafba25..8df4ddc 100644 > --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > @@ -31,6 +31,39 @@ > }; > }; > > + mmc@12200000 { > + status = "okay"; > + broken-cd; > + supports-highspeed; > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <0 4>; > + samsung,dw-mshc-ddr-timing = <0 2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; > + > + slot@0 { > + reg = <0>; > + bus-width = <8>; > + }; > + }; > + > + mmc@12220000 { > + status = "okay"; > + supports-highspeed; > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <2 3>; > + samsung,dw-mshc-ddr-timing = <1 2>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; > + > + slot@0 { > + reg = <0>; > + bus-width = <4>; > + }; > + }; > + > dp-controller@145B0000 { > pinctrl-names = "default"; > pinctrl-0 = <&dp_hpd>; > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi > index d537cd7..897f7f4 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -22,6 +22,9 @@ > compatible = "samsung,exynos5420"; > > aliases { > + mshc0 = &mmc_0; > + mshc1 = &mmc_1; > + mshc2 = &mmc_2; > pinctrl0 = &pinctrl_0; > pinctrl1 = &pinctrl_1; > pinctrl2 = &pinctrl_2; > @@ -84,6 +87,42 @@ > clock-names = "mfc"; > }; > > + mmc_0: mmc@12200000 { > + compatible = "samsung,exynos5420-dw-mshc-smu"; > + interrupts = <0 75 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x12200000 0x2000>; > + clocks = <&clock 351>, <&clock 132>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mmc_1: mmc@12210000 { > + compatible = "samsung,exynos5420-dw-mshc-smu"; > + interrupts = <0 76 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x12210000 0x2000>; > + clocks = <&clock 352>, <&clock 133>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > + mmc_2: mmc@12220000 { > + compatible = "samsung,exynos5420-dw-mshc"; > + interrupts = <0 77 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x12220000 0x1000>; > + clocks = <&clock 353>, <&clock 134>; > + clock-names = "biu", "ciu"; > + fifo-depth = <0x40>; > + status = "disabled"; > + }; > + > mct@101C0000 { > compatible = "samsung,exynos4210-mct"; > reg = <0x101C0000 0x800>; > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Gentle Ping... On Thu, Sep 26, 2013 at 12:13 PM, Yuvaraj Kumar <yuvaraj.cd@gmail.com> wrote: > Hi Kukjin, > Can you please take this patch to your tree? > > Best Regards > Yuvaraj > > On Tue, Sep 3, 2013 at 11:30 AM, Yuvaraj Kumar C D <yuvaraj.cd@gmail.com> wrote: >> This patch adds the mmc device tree node entries for exynos5420 SOC. >> Exynos5420 has a different version of DWMMC controller,so a new >> compatible string is used to distinguish it from the prior SOC's. >> >> This patch depends on >> [1]mmc: dw_mmc: exynos: configure SMU in exynos5420 >> [2]mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 >> [3]mmc: dw_mmc: update binding document exynos-dw-mshc.txt >> >> changes since v6: >> 1.renamed node name to mmc >> 2.Used compatible string "samsung,exynos5420-dw-mshc" >> for controller instance which does not have SMU. >> 3.Used compatible string "samsung,exynos5420-dw-mshc-smu" >> for controller instance which has SMU. >> >> changes since v5: >> 1.removed instance index from node name. >> 2.changed the node name to mshc. >> 3.changed the reg property value for mshc_2. >> >> changes since v4: >> 1.Droppped the bypass-smu binding property. >> 2.Used compatible string "samsung,exynos5250-dw-mshc" >> for controller instance which does not have SMU. >> >> changes since V3: >> 1.change fifo-depth size from 0x80 to 0x40 >> 2.Move the below properties >> a.card-detect-delay >> b.samsung,dw-mshc-ciu-div >> c.samsung,dw-mshc-sdr-timing >> d.samsung,dw-mshc-ddr-timing >> from SOC dts to board dts file as suggested by Doug Anderson >> >> changes since V2: >> 1.dropped num-slots property from node as its not required >> if number of card slots available is 1. >> >> 2.Move the below properties >> a.fifo-depth >> b.card-detect-delay >> c.samsung,dw-mshc-ciu-div >> d.samsung,dw-mshc-sdr-timing >> e.samsung,dw-mshc-ddr-timing >> from board dts to SOC dts,as these are not board specific properties. >> >> 3.Updated the binding document exynos-dw-mshc.txt. >> >> changes since V1: >> 1.disable node by status = disabled in SOC file >> 2.enable node by status = okay in board specific file >> >> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> >> --- >> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 + >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 33 +++++++++++++++++ >> arch/arm/boot/dts/exynos5420.dtsi | 39 ++++++++++++++++++++ >> 3 files changed, 74 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> index 6d1c098..84cd56f 100644 >> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt >> @@ -16,6 +16,8 @@ Required Properties: >> specific extensions. >> - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 >> specific extensions. >> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 >> + specific extensions. >> >> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface >> unit (ciu) clock. This property is applicable only for Exynos5 SoC's and >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> index bafba25..8df4ddc 100644 >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> @@ -31,6 +31,39 @@ >> }; >> }; >> >> + mmc@12200000 { >> + status = "okay"; >> + broken-cd; >> + supports-highspeed; >> + card-detect-delay = <200>; >> + samsung,dw-mshc-ciu-div = <3>; >> + samsung,dw-mshc-sdr-timing = <0 4>; >> + samsung,dw-mshc-ddr-timing = <0 2>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; >> + >> + slot@0 { >> + reg = <0>; >> + bus-width = <8>; >> + }; >> + }; >> + >> + mmc@12220000 { >> + status = "okay"; >> + supports-highspeed; >> + card-detect-delay = <200>; >> + samsung,dw-mshc-ciu-div = <3>; >> + samsung,dw-mshc-sdr-timing = <2 3>; >> + samsung,dw-mshc-ddr-timing = <1 2>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; >> + >> + slot@0 { >> + reg = <0>; >> + bus-width = <4>; >> + }; >> + }; >> + >> dp-controller@145B0000 { >> pinctrl-names = "default"; >> pinctrl-0 = <&dp_hpd>; >> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi >> index d537cd7..897f7f4 100644 >> --- a/arch/arm/boot/dts/exynos5420.dtsi >> +++ b/arch/arm/boot/dts/exynos5420.dtsi >> @@ -22,6 +22,9 @@ >> compatible = "samsung,exynos5420"; >> >> aliases { >> + mshc0 = &mmc_0; >> + mshc1 = &mmc_1; >> + mshc2 = &mmc_2; >> pinctrl0 = &pinctrl_0; >> pinctrl1 = &pinctrl_1; >> pinctrl2 = &pinctrl_2; >> @@ -84,6 +87,42 @@ >> clock-names = "mfc"; >> }; >> >> + mmc_0: mmc@12200000 { >> + compatible = "samsung,exynos5420-dw-mshc-smu"; >> + interrupts = <0 75 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x12200000 0x2000>; >> + clocks = <&clock 351>, <&clock 132>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x40>; >> + status = "disabled"; >> + }; >> + >> + mmc_1: mmc@12210000 { >> + compatible = "samsung,exynos5420-dw-mshc-smu"; >> + interrupts = <0 76 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x12210000 0x2000>; >> + clocks = <&clock 352>, <&clock 133>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x40>; >> + status = "disabled"; >> + }; >> + >> + mmc_2: mmc@12220000 { >> + compatible = "samsung,exynos5420-dw-mshc"; >> + interrupts = <0 77 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0x12220000 0x1000>; >> + clocks = <&clock 353>, <&clock 134>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x40>; >> + status = "disabled"; >> + }; >> + >> mct@101C0000 { >> compatible = "samsung,exynos4210-mct"; >> reg = <0x101C0000 0x800>; >> -- >> 1.7.9.5 >> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/18/13 20:07, Yuvaraj Kumar wrote: > Gentle Ping... > > On Thu, Sep 26, 2013 at 12:13 PM, Yuvaraj Kumar<yuvaraj.cd@gmail.com> wrote: >> Hi Kukjin, >> Can you please take this patch to your tree? >> >> Best Regards >> Yuvaraj >> >> On Tue, Sep 3, 2013 at 11:30 AM, Yuvaraj Kumar C D<yuvaraj.cd@gmail.com> wrote: >>> This patch adds the mmc device tree node entries for exynos5420 SOC. >>> Exynos5420 has a different version of DWMMC controller,so a new >>> compatible string is used to distinguish it from the prior SOC's. >>> >>> This patch depends on >>> [1]mmc: dw_mmc: exynos: configure SMU in exynos5420 >>> [2]mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 >>> [3]mmc: dw_mmc: update binding document exynos-dw-mshc.txt >>> Yuvaraj, Looks good to me, applied but please make sure above patches are merged into mmc tree for upcoming merge window. Thanks, Kukjin >>> changes since v6: >>> 1.renamed node name to mmc >>> 2.Used compatible string "samsung,exynos5420-dw-mshc" >>> for controller instance which does not have SMU. >>> 3.Used compatible string "samsung,exynos5420-dw-mshc-smu" >>> for controller instance which has SMU. >>> >>> changes since v5: >>> 1.removed instance index from node name. >>> 2.changed the node name to mshc. >>> 3.changed the reg property value for mshc_2. >>> >>> changes since v4: >>> 1.Droppped the bypass-smu binding property. >>> 2.Used compatible string "samsung,exynos5250-dw-mshc" >>> for controller instance which does not have SMU. >>> >>> changes since V3: >>> 1.change fifo-depth size from 0x80 to 0x40 >>> 2.Move the below properties >>> a.card-detect-delay >>> b.samsung,dw-mshc-ciu-div >>> c.samsung,dw-mshc-sdr-timing >>> d.samsung,dw-mshc-ddr-timing >>> from SOC dts to board dts file as suggested by Doug Anderson >>> >>> changes since V2: >>> 1.dropped num-slots property from node as its not required >>> if number of card slots available is 1. >>> >>> 2.Move the below properties >>> a.fifo-depth >>> b.card-detect-delay >>> c.samsung,dw-mshc-ciu-div >>> d.samsung,dw-mshc-sdr-timing >>> e.samsung,dw-mshc-ddr-timing >>> from board dts to SOC dts,as these are not board specific properties. >>> >>> 3.Updated the binding document exynos-dw-mshc.txt. >>> >>> changes since V1: >>> 1.disable node by status = disabled in SOC file >>> 2.enable node by status = okay in board specific file >>> >>> Signed-off-by: Yuvaraj Kumar C D<yuvaraj.cd@samsung.com> >>> --- >>> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 + >>> arch/arm/boot/dts/exynos5420-smdk5420.dts | 33 +++++++++++++++++ >>> arch/arm/boot/dts/exynos5420.dtsi | 39 ++++++++++++++++++++ >>> 3 files changed, 74 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 6d1c098..84cd56f 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -16,6 +16,8 @@ Required Properties: specific extensions. - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 specific extensions. + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 + specific extensions. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index bafba25..8df4ddc 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -31,6 +31,39 @@ }; }; + mmc@12200000 { + status = "okay"; + broken-cd; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + mmc@12220000 { + status = "okay"; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + dp-controller@145B0000 { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index d537cd7..897f7f4 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -22,6 +22,9 @@ compatible = "samsung,exynos5420"; aliases { + mshc0 = &mmc_0; + mshc1 = &mmc_1; + mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -84,6 +87,42 @@ clock-names = "mfc"; }; + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x2000>; + clocks = <&clock 351>, <&clock 132>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x2000>; + clocks = <&clock 352>, <&clock 133>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock 353>, <&clock 134>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>;
This patch adds the mmc device tree node entries for exynos5420 SOC. Exynos5420 has a different version of DWMMC controller,so a new compatible string is used to distinguish it from the prior SOC's. This patch depends on [1]mmc: dw_mmc: exynos: configure SMU in exynos5420 [2]mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 [3]mmc: dw_mmc: update binding document exynos-dw-mshc.txt changes since v6: 1.renamed node name to mmc 2.Used compatible string "samsung,exynos5420-dw-mshc" for controller instance which does not have SMU. 3.Used compatible string "samsung,exynos5420-dw-mshc-smu" for controller instance which has SMU. changes since v5: 1.removed instance index from node name. 2.changed the node name to mshc. 3.changed the reg property value for mshc_2. changes since v4: 1.Droppped the bypass-smu binding property. 2.Used compatible string "samsung,exynos5250-dw-mshc" for controller instance which does not have SMU. changes since V3: 1.change fifo-depth size from 0x80 to 0x40 2.Move the below properties a.card-detect-delay b.samsung,dw-mshc-ciu-div c.samsung,dw-mshc-sdr-timing d.samsung,dw-mshc-ddr-timing from SOC dts to board dts file as suggested by Doug Anderson changes since V2: 1.dropped num-slots property from node as its not required if number of card slots available is 1. 2.Move the below properties a.fifo-depth b.card-detect-delay c.samsung,dw-mshc-ciu-div d.samsung,dw-mshc-sdr-timing e.samsung,dw-mshc-ddr-timing from board dts to SOC dts,as these are not board specific properties. 3.Updated the binding document exynos-dw-mshc.txt. changes since V1: 1.disable node by status = disabled in SOC file 2.enable node by status = okay in board specific file Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> --- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 + arch/arm/boot/dts/exynos5420-smdk5420.dts | 33 +++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi | 39 ++++++++++++++++++++ 3 files changed, 74 insertions(+)