@@ -26,6 +26,54 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ camera_lens_cover {
+ label = "Camera Lens Cover";
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
+ gpio-key,wakeup;
+ };
+
+ camera_focus {
+ label = "Camera Focus";
+ gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+ linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
+ gpio-key,wakeup;
+ };
+
+ camera_capture {
+ label = "Camera Capture";
+ gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+ linux,code = <0xd4>; /* KEY_CAMERA */
+ gpio-key,wakeup;
+ };
+
+ lock_button {
+ label = "Lock Button";
+ gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+ linux,code = <0x98>; /* KEY_SCREENLOCK */
+ gpio-key,wakeup;
+ };
+
+ keypad_slide {
+ label = "Keypad Slide";
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
+ gpio-key,wakeup;
+ };
+
+ proximity_sensor {
+ label = "Proximity Sensor";
+ gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
+ };
+ };
+
};
&omap3_pmx_core {
Add device tree node for the GPIO keys provided by the N900 board. This is a simple conversion of the existing board code. Signed-off-by: Sebastian Reichel <sre@debian.org> --- arch/arm/boot/dts/omap3-n900.dts | 48 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)