diff mbox

[v2.2,2/4] media: Check for active links on pads with MEDIA_PAD_FL_MUST_CONNECT flag

Message ID 1381873697-5521-1-git-send-email-sakari.ailus@iki.fi (mailing list archive)
State New, archived
Headers show

Commit Message

Sakari Ailus Oct. 15, 2013, 9:48 p.m. UTC
Do not allow streaming if a pad with MEDIA_PAD_FL_MUST_CONNECT flag is not
connected by an active link.

This patch makes it possible to avoid drivers having to check for the most
common case of link state validation: a sink pad that must be connected.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/media-entity.c |   41 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 34 insertions(+), 7 deletions(-)

Comments

Laurent Pinchart Oct. 31, 2013, 2:46 p.m. UTC | #1
Hi Sakari,

Thank you for the patch.

On Wednesday 16 October 2013 00:48:17 Sakari Ailus wrote:
> Do not allow streaming if a pad with MEDIA_PAD_FL_MUST_CONNECT flag is not
> connected by an active link.
> 
> This patch makes it possible to avoid drivers having to check for the most
> common case of link state validation: a sink pad that must be connected.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

I've taken the whole series in my tree and will push it upstream for v3.14.

> ---
>  drivers/media/media-entity.c |   41 ++++++++++++++++++++++++++++++++-------
>  1 file changed, 34 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
> index 2c286c3..37c334e 100644
> --- a/drivers/media/media-entity.c
> +++ b/drivers/media/media-entity.c
> @@ -235,6 +235,8 @@ __must_check int media_entity_pipeline_start(struct
> media_entity *entity, media_entity_graph_walk_start(&graph, entity);
> 
>  	while ((entity = media_entity_graph_walk_next(&graph))) {
> +		DECLARE_BITMAP(active, entity->num_pads);
> +		DECLARE_BITMAP(has_no_links, entity->num_pads);
>  		unsigned int i;
> 
>  		entity->stream_count++;
> @@ -248,21 +250,46 @@ __must_check int media_entity_pipeline_start(struct
> media_entity *entity, if (!entity->ops || !entity->ops->link_validate)
>  			continue;
> 
> +		bitmap_zero(active, entity->num_pads);
> +		bitmap_fill(has_no_links, entity->num_pads);
> +
>  		for (i = 0; i < entity->num_links; i++) {
>  			struct media_link *link = &entity->links[i];
> -
> -			/* Is this pad part of an enabled link? */
> -			if (!(link->flags & MEDIA_LNK_FL_ENABLED))
> -				continue;
> -
> -			/* Are we the sink or not? */
> -			if (link->sink->entity != entity)
> +			struct media_pad *pad = link->sink->entity == entity
> +						? link->sink : link->source;
> +
> +			/* Mark that a pad is connected by a link. */
> +			bitmap_clear(has_no_links, pad->index, 1);
> +
> +			/*
> +			 * Pads that either do not need to connect or
> +			 * are connected through an enabled link are
> +			 * fine.
> +			 */
> +			if (!(pad->flags & MEDIA_PAD_FL_MUST_CONNECT) ||
> +			    link->flags & MEDIA_LNK_FL_ENABLED)
> +				bitmap_set(active, pad->index, 1);
> +
> +			/*
> +			 * Link validation will only take place for
> +			 * sink ends of the link that are enabled.
> +			 */
> +			if (link->sink != pad ||
> +			    !(link->flags & MEDIA_LNK_FL_ENABLED))
>  				continue;
> 
>  			ret = entity->ops->link_validate(link);
>  			if (ret < 0 && ret != -ENOIOCTLCMD)
>  				goto error;
>  		}
> +
> +		/* Either no links or validated links are fine. */
> +		bitmap_or(active, active, has_no_links, entity->num_pads);
> +
> +		if (!bitmap_full(active, entity->num_pads)) {
> +			ret = -EPIPE;
> +			goto error;
> +		}
>  	}
> 
>  	mutex_unlock(&mdev->graph_mutex);
diff mbox

Patch

diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 2c286c3..37c334e 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -235,6 +235,8 @@  __must_check int media_entity_pipeline_start(struct media_entity *entity,
 	media_entity_graph_walk_start(&graph, entity);
 
 	while ((entity = media_entity_graph_walk_next(&graph))) {
+		DECLARE_BITMAP(active, entity->num_pads);
+		DECLARE_BITMAP(has_no_links, entity->num_pads);
 		unsigned int i;
 
 		entity->stream_count++;
@@ -248,21 +250,46 @@  __must_check int media_entity_pipeline_start(struct media_entity *entity,
 		if (!entity->ops || !entity->ops->link_validate)
 			continue;
 
+		bitmap_zero(active, entity->num_pads);
+		bitmap_fill(has_no_links, entity->num_pads);
+
 		for (i = 0; i < entity->num_links; i++) {
 			struct media_link *link = &entity->links[i];
-
-			/* Is this pad part of an enabled link? */
-			if (!(link->flags & MEDIA_LNK_FL_ENABLED))
-				continue;
-
-			/* Are we the sink or not? */
-			if (link->sink->entity != entity)
+			struct media_pad *pad = link->sink->entity == entity
+						? link->sink : link->source;
+
+			/* Mark that a pad is connected by a link. */
+			bitmap_clear(has_no_links, pad->index, 1);
+
+			/*
+			 * Pads that either do not need to connect or
+			 * are connected through an enabled link are
+			 * fine.
+			 */
+			if (!(pad->flags & MEDIA_PAD_FL_MUST_CONNECT) ||
+			    link->flags & MEDIA_LNK_FL_ENABLED)
+				bitmap_set(active, pad->index, 1);
+
+			/*
+			 * Link validation will only take place for
+			 * sink ends of the link that are enabled.
+			 */
+			if (link->sink != pad ||
+			    !(link->flags & MEDIA_LNK_FL_ENABLED))
 				continue;
 
 			ret = entity->ops->link_validate(link);
 			if (ret < 0 && ret != -ENOIOCTLCMD)
 				goto error;
 		}
+
+		/* Either no links or validated links are fine. */
+		bitmap_or(active, active, has_no_links, entity->num_pads);
+
+		if (!bitmap_full(active, entity->num_pads)) {
+			ret = -EPIPE;
+			goto error;
+		}
 	}
 
 	mutex_unlock(&mdev->graph_mutex);