| Message ID | 1383289495-24523-7-git-send-email-Li.Xiubo@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Not that it would improve functionality, but: On Fri, Nov 01, 2013 at 15:04:53 +0800, Xiubo Li wrote: [...] > diff --git a/sound/soc/fsl/fsl-sgtl5000-vf610.c b/sound/soc/fsl/fsl-sgtl5000-vf610.c > new file mode 100644 > index 0000000..f535b42 > --- /dev/null > +++ b/sound/soc/fsl/fsl-sgtl5000-vf610.c > @@ -0,0 +1,208 @@ > +/* > + * Freeacale ALSA SoC Audio using SGT1500 as codec. ^ ^ ^ "Freescale" "SGTL5000" regards, Oskar
Hi Xiubo, On Fri, Nov 01, 2013 at 03:04:53PM +0800, Xiubo Li wrote: > This is the SGTL5000 codec based audio driver supported with both > playback and capture dai link implemention. > > This implementation is only compatible with device tree definition. > > Signed-off-by: Alison Wang <b18965@freescale.com > Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> > > Conflicts: > sound/soc/fsl/Makefile > --- > sound/soc/fsl/Kconfig | 10 ++ > sound/soc/fsl/Makefile | 2 + > sound/soc/fsl/fsl-sgtl5000-vf610.c | 208 +++++++++++++++++++++++++++++++++++++ I just doubt if this file naming is appropriate. Even if we might not have rigor rule for the file names, according to existing ones, they are all in a same pattern: [SoC name]-[codec name].c "imx-sgtl5000.c" for example I think it would make user less confused about what this file exactly is if this machine driver also follow the pattern: vf610-sgtl5000.c @Shawn What do you think about the file name? > 3 files changed, 220 insertions(+) > create mode 100644 sound/soc/fsl/fsl-sgtl5000-vf610.c > > diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig > index 9a8851e..1b835ba 100644 > --- a/sound/soc/fsl/Kconfig > +++ b/sound/soc/fsl/Kconfig > @@ -228,4 +228,14 @@ config SND_SOC_FSL_SAI > tristate > select SND_SOC_GENERIC_DMAENGINE_PCM > > +config SND_SOC_FSL_SGTL5000_VF610 Same problem with the this define. > + tristate "SoC Audio support for FSL boards with sgtl5000" And 'FSL' here confuses me a lot. Because those boards based on i.MX series also could be called FSL boards. > + depends on OF && I2C > + select SND_SOC_FSL_SAI > + select SND_SOC_FSL_PCM > + select SND_SOC_SGTL5000 > + help > + Say Y if you want to add support for SoC audio on an FSL board with > + a sgtl5000 codec. > + > endif # SND_FSL_SOC > diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile > index e5acc03..26fc551 100644 > --- a/sound/soc/fsl/Makefile > +++ b/sound/soc/fsl/Makefile > @@ -59,5 +59,7 @@ obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o > > # FSL ARM SAI/SGT15000 Platform Support > snd-soc-fsl-sai-objs := fsl-sai.o > +snd-soc-fsl-sgtl5000-vf610-objs := fsl-sgtl5000-vf610.o > > obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o > +obj-$(CONFIG_SND_SOC_FSL_SGTL5000_VF610) += snd-soc-fsl-sgtl5000-vf610.o > diff --git a/sound/soc/fsl/fsl-sgtl5000-vf610.c b/sound/soc/fsl/fsl-sgtl5000-vf610.c > new file mode 100644 > index 0000000..f535b42 > --- /dev/null > +++ b/sound/soc/fsl/fsl-sgtl5000-vf610.c > @@ -0,0 +1,208 @@ > +/* > + * Freeacale ALSA SoC Audio using SGT1500 as codec. > + * > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + */ > + > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_platform.h> > +#include <linux/i2c.h> > +#include <linux/clk.h> > + > +#include "../codecs/sgtl5000.h" > +#include "fsl-sai.h" > + > +static unsigned int sysclk_rate; > + > +static int fsl_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd) Naming issue here again. At least from my point of view, if you actually merged imx-sgtl5000 with vf610-sgtl5000 and made it also compatible to other freescale SoCs, you could then fairly call it fsl_sgtl5000_xxxx. Well, I might be a little picky here because it's a static function and won't conflict others. Just the name here doesn't look so explicit to me. Please reconsider about this whole file's naming. Best regards, Nicolin Chen > +{ > + int ret; > + struct device *dev = rtd->card->dev; > + > + ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK, > + sysclk_rate, SND_SOC_CLOCK_IN); > + if (ret) { > + dev_err(dev, "could not set codec driver clock params :%d\n", > + ret); > + return ret; > + } > + > + ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, FSL_SAI_CLK_BUS, > + sysclk_rate, SND_SOC_CLOCK_OUT); > + if (ret) { > + dev_err(dev, "could not set cpu dai driver clock params :%d\n", > + ret); > + return ret; > + } > + > + return 0; > +} > + > +static int sgtl5000_params(struct snd_pcm_substream *substream, > + struct snd_pcm_hw_params *params) > +{ > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; > + unsigned int channels = params_channels(params); > + > + /* TODO: The SAI driver should figure this out for us */ > + switch (channels) { > + case 2: > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffc, 0xfffffffc, 2, 0); > + break; > + case 1: > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffe, 0xfffffffe, 1, 0); > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static struct snd_soc_ops fsl_sgtl5000_hifi_ops = { > + .hw_params = sgtl5000_params, > +}; > + > +static struct snd_soc_dai_link fsl_sgtl5000_dai = { > + .name = "HiFi", > + .stream_name = "HiFi", > + .codec_dai_name = "sgtl5000", > + .init = &fsl_sgtl5000_dai_init, > + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | > + SND_SOC_DAIFMT_CBM_CFM, > + .ops = &fsl_sgtl5000_hifi_ops, > +}; > + > +static const struct snd_soc_dapm_widget fsl_sgtl5000_dapm_widgets[] = { > + SND_SOC_DAPM_MIC("Mic Jack", NULL), > + SND_SOC_DAPM_LINE("Line In Jack", NULL), > + SND_SOC_DAPM_HP("Headphone Jack", NULL), > + SND_SOC_DAPM_SPK("Line Out Jack", NULL), > + SND_SOC_DAPM_SPK("Ext Spk", NULL), > +}; > + > +static struct snd_soc_card fsl_sgt1500_card = { > + .owner = THIS_MODULE, > + .num_links = 1, > + .dai_link = &fsl_sgtl5000_dai, > + .dapm_widgets = fsl_sgtl5000_dapm_widgets, > + .num_dapm_widgets = ARRAY_SIZE(fsl_sgtl5000_dapm_widgets), > +}; > + > +static int fsl_sgtl5000_parse_dt(struct platform_device *pdev) > +{ > + int ret; > + struct device_node *sai_np, *codec_np; > + struct clk *codec_clk; > + struct i2c_client *codec_dev; > + struct device_node *np = pdev->dev.of_node; > + > + ret = snd_soc_of_parse_card_name(&fsl_sgt1500_card, "model"); > + if (ret) > + return ret; > + > + ret = snd_soc_of_parse_audio_routing(&fsl_sgt1500_card, > + "audio-routing"); > + if (ret) > + return ret; > + > + sai_np = of_parse_phandle(np, "saif-controller", 0); > + if (!sai_np) { > + dev_err(&pdev->dev, "\"saif-controller\" phandle missing or " > + "invalid\n"); > + return -EINVAL; > + } > + fsl_sgtl5000_dai.cpu_of_node = sai_np; > + fsl_sgtl5000_dai.platform_of_node = sai_np; > + > + codec_np = of_parse_phandle(np, "audio-codec", 0); > + if (!codec_np) { > + dev_err(&pdev->dev, "\"audio-codec\" phandle missing or " > + "invalid\n"); > + ret = -EINVAL; > + goto sai_np_fail; > + } > + fsl_sgtl5000_dai.codec_of_node = codec_np; > + > + codec_dev = of_find_i2c_device_by_node(codec_np); > + if (!codec_dev) { > + dev_err(&pdev->dev, "failed to find codec platform device\n"); > + ret = PTR_ERR(codec_dev); > + goto codec_np_fail; > + } > + > + codec_clk = devm_clk_get(&codec_dev->dev, NULL); > + if (IS_ERR(codec_clk)) { > + dev_err(&pdev->dev, "failed to get codec clock\n"); > + ret = PTR_ERR(codec_clk); > + goto codec_np_fail; > + } > + > + sysclk_rate = clk_get_rate(codec_clk); > + > +codec_np_fail: > + of_node_put(codec_np); > +sai_np_fail: > + of_node_put(sai_np); > + > + return ret; > +} > + > +static int fsl_sgtl5000_probe(struct platform_device *pdev) > +{ > + int ret; > + > + fsl_sgt1500_card.dev = &pdev->dev; > + > + ret = fsl_sgtl5000_parse_dt(pdev); > + if (ret) { > + dev_err(&pdev->dev, > + "parse sgtl5000 device tree failed :%d\n", > + ret); > + return ret; > + } > + > + ret = devm_snd_soc_register_card(&pdev->dev, &fsl_sgt1500_card); > + if (ret) { > + dev_err(&pdev->dev, "register soc sound card failed :%d\n", > + ret); > + return ret; > + } > + > + return 0; > +} > + > +static int fsl_sgtl5000_remove(struct platform_device *pdev) > +{ > + snd_soc_unregister_card(&fsl_sgt1500_card); > + > + return 0; > +} > + > +static const struct of_device_id fsl_sgtl5000_dt_ids[] = { > + { .compatible = "fsl,vf610-sgtl5000", }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, fsl_sgtl5000_dt_ids); > + > +static struct platform_driver fsl_sgtl5000_driver = { > + .driver = { > + .name = "fsl-sgtl5000", > + .owner = THIS_MODULE, > + .of_match_table = fsl_sgtl5000_dt_ids, > + }, > + .probe = fsl_sgtl5000_probe, > + .remove = fsl_sgtl5000_remove, > +}; > +module_platform_driver(fsl_sgtl5000_driver); > + > +MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>"); > +MODULE_DESCRIPTION("Freescale SGTL5000 ASoC driver"); > +MODULE_LICENSE("GPL"); > -- > 1.8.4 >
On Fri, Nov 01, 2013 at 06:28:05PM +0800, Nicolin Chen wrote: > > sound/soc/fsl/fsl-sgtl5000-vf610.c | 208 +++++++++++++++++++++++++++++++++++++ > > I just doubt if this file naming is appropriate. Even if we might not have > rigor rule for the file names, according to existing ones, they are all in > a same pattern: [SoC name]-[codec name].c > > "imx-sgtl5000.c" for example > > I think it would make user less confused about what this file exactly is if > this machine driver also follow the pattern: vf610-sgtl5000.c > > > @Shawn > > What do you think about the file name? Yeah, it would be better to name the file following the existing the pattern. Shawn
On Fri, Nov 01, 2013 at 03:04:53PM +0800, Xiubo Li wrote: > Conflicts: > sound/soc/fsl/Makefile Ahem. > + /* TODO: The SAI driver should figure this out for us */ > + switch (channels) { > + case 2: > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffc, 0xfffffffc, 2, 0); > + break; > + case 1: > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffe, 0xfffffffe, 1, 0); > + break; > + default: > + return -EINVAL; > + } Yes, it should - this code should probably just be copied straight into the SAI driver. If we need to support other configurations we can do that later. > +static int fsl_sgtl5000_remove(struct platform_device *pdev) > +{ > + snd_soc_unregister_card(&fsl_sgt1500_card); > + > + return 0; > +} You're using snd_soc_unregister_card() so you don't need to do this.
> > Conflicts: > > sound/soc/fsl/Makefile > > Ahem. > This will be removed. > > +static int fsl_sgtl5000_remove(struct platform_device *pdev) { > > + snd_soc_unregister_card(&fsl_sgt1500_card); > > + > > + return 0; > > +} > > You're using snd_soc_unregister_card() so you don't need to do this. > See the next version.
= > [...] > > diff --git a/sound/soc/fsl/fsl-sgtl5000-vf610.c b/sound/soc/fsl/fsl- > sgtl5000-vf610.c > > new file mode 100644 > > index 0000000..f535b42 > > --- /dev/null > > +++ b/sound/soc/fsl/fsl-sgtl5000-vf610.c > > @@ -0,0 +1,208 @@ > > +/* > > + * Freeacale ALSA SoC Audio using SGT1500 as codec. > ^ ^ ^ > "Freescale" "SGTL5000" > Yes. See the next version.
Hi Nicolin, > > This is the SGTL5000 codec based audio driver supported with both > > playback and capture dai link implemention. > > > > This implementation is only compatible with device tree definition. > > > > Signed-off-by: Alison Wang <b18965@freescale.com > > Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> > > > > Conflicts: > > sound/soc/fsl/Makefile > > --- > > sound/soc/fsl/Kconfig | 10 ++ > > sound/soc/fsl/Makefile | 2 + > > > sound/soc/fsl/fsl-sgtl5000-vf610.c | 208 > > +++++++++++++++++++++++++++++++++++++ > > I just doubt if this file naming is appropriate. Even if we might not > have rigor rule for the file names, according to existing ones, they are > all in a same pattern: [SoC name]-[codec name].c > > "imx-sgtl5000.c" for example > > I think it would make user less confused about what this file exactly is > if this machine driver also follow the pattern: vf610-sgtl5000.c > Yes, it looks nicer. > > @Shawn > > What do you think about the file name? > > > 3 files changed, 220 insertions(+) > > create mode 100644 sound/soc/fsl/fsl-sgtl5000-vf610.c > > > > diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index > > 9a8851e..1b835ba 100644 > > --- a/sound/soc/fsl/Kconfig > > +++ b/sound/soc/fsl/Kconfig > > @@ -228,4 +228,14 @@ config SND_SOC_FSL_SAI > > tristate > > select SND_SOC_GENERIC_DMAENGINE_PCM > > > > +config SND_SOC_FSL_SGTL5000_VF610 > > Same problem with the this define. > > > + tristate "SoC Audio support for FSL boards with sgtl5000" > > And 'FSL' here confuses me a lot. Because those boards based on i.MX > series also could be called FSL boards. > Yes, this should be VF610. > > + depends on OF && I2C > > + select SND_SOC_FSL_SAI > > + select SND_SOC_FSL_PCM > > + select SND_SOC_SGTL5000 > > + help > > + Say Y if you want to add support for SoC audio on an FSL board > with > > + a sgtl5000 codec. > > + > > endif # SND_FSL_SOC > > diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index > > e5acc03..26fc551 100644 > > --- a/sound/soc/fsl/Makefile > > +++ b/sound/soc/fsl/Makefile > > @@ -59,5 +59,7 @@ obj-$(CONFIG_SND_SOC_IMX_MC13783) += > > snd-soc-imx-mc13783.o > > > > # FSL ARM SAI/SGT15000 Platform Support snd-soc-fsl-sai-objs := > > fsl-sai.o > > +snd-soc-fsl-sgtl5000-vf610-objs := fsl-sgtl5000-vf610.o > > > > obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o > > +obj-$(CONFIG_SND_SOC_FSL_SGTL5000_VF610) += > > +snd-soc-fsl-sgtl5000-vf610.o > > diff --git a/sound/soc/fsl/fsl-sgtl5000-vf610.c > > b/sound/soc/fsl/fsl-sgtl5000-vf610.c > > new file mode 100644 > > index 0000000..f535b42 > > --- /dev/null > > +++ b/sound/soc/fsl/fsl-sgtl5000-vf610.c > > @@ -0,0 +1,208 @@ > > +/* > > + * Freeacale ALSA SoC Audio using SGT1500 as codec. > > + * > > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > + * > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_platform.h> > > +#include <linux/i2c.h> > > +#include <linux/clk.h> > > + > > +#include "../codecs/sgtl5000.h" > > +#include "fsl-sai.h" > > + > > +static unsigned int sysclk_rate; > > + > > +static int fsl_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd) > > Naming issue here again. > > At least from my point of view, if you actually merged imx-sgtl5000 with > vf610-sgtl5000 and made it also compatible to other freescale SoCs, you > could then fairly call it fsl_sgtl5000_xxxx. > > Well, I might be a little picky here because it's a static function and > won't conflict others. Just the name here doesn't look so explicit to me. > > Please reconsider about this whole file's naming. > Yes, I still not very sure the names of the functions and files, from your replies, I have got many information about the rules and others, I'll think it over and do some research, Please see the next version. Best regards, Xiubo
> > > sound/soc/fsl/fsl-sgtl5000-vf610.c | 208 > > > +++++++++++++++++++++++++++++++++++++ > > > > I just doubt if this file naming is appropriate. Even if we might not > > have rigor rule for the file names, according to existing ones, they > > are all in a same pattern: [SoC name]-[codec name].c > > > > "imx-sgtl5000.c" for example > > > > I think it would make user less confused about what this file exactly > > is if this machine driver also follow the pattern: vf610-sgtl5000.c > > > > > > @Shawn > > > > What do you think about the file name? > > Yeah, it would be better to name the file following the existing the > pattern. > Please see the next version. Best Regards, Xiubo
> > + /* TODO: The SAI driver should figure this out for us */ > > + switch (channels) { > > + case 2: > > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffc, 0xfffffffc, 2, > 0); > > + break; > > + case 1: > > + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffe, 0xfffffffe, 1, > 0); > > + break; > > + default: > > + return -EINVAL; > > + } > > Yes, it should - this code should probably just be copied straight into > the SAI driver. If we need to support other configurations we can do > that later. > Well, yes. I have considered carefully about this, It maybe nicer to move this to SAI driver's .hw_params. -- Best Regards, Xiubo
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 9a8851e..1b835ba 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -228,4 +228,14 @@ config SND_SOC_FSL_SAI tristate select SND_SOC_GENERIC_DMAENGINE_PCM +config SND_SOC_FSL_SGTL5000_VF610 + tristate "SoC Audio support for FSL boards with sgtl5000" + depends on OF && I2C + select SND_SOC_FSL_SAI + select SND_SOC_FSL_PCM + select SND_SOC_SGTL5000 + help + Say Y if you want to add support for SoC audio on an FSL board with + a sgtl5000 codec. + endif # SND_FSL_SOC diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index e5acc03..26fc551 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -59,5 +59,7 @@ obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o # FSL ARM SAI/SGT15000 Platform Support snd-soc-fsl-sai-objs := fsl-sai.o +snd-soc-fsl-sgtl5000-vf610-objs := fsl-sgtl5000-vf610.o obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o +obj-$(CONFIG_SND_SOC_FSL_SGTL5000_VF610) += snd-soc-fsl-sgtl5000-vf610.o diff --git a/sound/soc/fsl/fsl-sgtl5000-vf610.c b/sound/soc/fsl/fsl-sgtl5000-vf610.c new file mode 100644 index 0000000..f535b42 --- /dev/null +++ b/sound/soc/fsl/fsl-sgtl5000-vf610.c @@ -0,0 +1,208 @@ +/* + * Freeacale ALSA SoC Audio using SGT1500 as codec. + * + * Copyright 2012-2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/i2c.h> +#include <linux/clk.h> + +#include "../codecs/sgtl5000.h" +#include "fsl-sai.h" + +static unsigned int sysclk_rate; + +static int fsl_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd) +{ + int ret; + struct device *dev = rtd->card->dev; + + ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK, + sysclk_rate, SND_SOC_CLOCK_IN); + if (ret) { + dev_err(dev, "could not set codec driver clock params :%d\n", + ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, FSL_SAI_CLK_BUS, + sysclk_rate, SND_SOC_CLOCK_OUT); + if (ret) { + dev_err(dev, "could not set cpu dai driver clock params :%d\n", + ret); + return ret; + } + + return 0; +} + +static int sgtl5000_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + unsigned int channels = params_channels(params); + + /* TODO: The SAI driver should figure this out for us */ + switch (channels) { + case 2: + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffc, 0xfffffffc, 2, 0); + break; + case 1: + snd_soc_dai_set_tdm_slot(cpu_dai, 0xfffffffe, 0xfffffffe, 1, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static struct snd_soc_ops fsl_sgtl5000_hifi_ops = { + .hw_params = sgtl5000_params, +}; + +static struct snd_soc_dai_link fsl_sgtl5000_dai = { + .name = "HiFi", + .stream_name = "HiFi", + .codec_dai_name = "sgtl5000", + .init = &fsl_sgtl5000_dai_init, + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM, + .ops = &fsl_sgtl5000_hifi_ops, +}; + +static const struct snd_soc_dapm_widget fsl_sgtl5000_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_LINE("Line In Jack", NULL), + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Line Out Jack", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static struct snd_soc_card fsl_sgt1500_card = { + .owner = THIS_MODULE, + .num_links = 1, + .dai_link = &fsl_sgtl5000_dai, + .dapm_widgets = fsl_sgtl5000_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(fsl_sgtl5000_dapm_widgets), +}; + +static int fsl_sgtl5000_parse_dt(struct platform_device *pdev) +{ + int ret; + struct device_node *sai_np, *codec_np; + struct clk *codec_clk; + struct i2c_client *codec_dev; + struct device_node *np = pdev->dev.of_node; + + ret = snd_soc_of_parse_card_name(&fsl_sgt1500_card, "model"); + if (ret) + return ret; + + ret = snd_soc_of_parse_audio_routing(&fsl_sgt1500_card, + "audio-routing"); + if (ret) + return ret; + + sai_np = of_parse_phandle(np, "saif-controller", 0); + if (!sai_np) { + dev_err(&pdev->dev, "\"saif-controller\" phandle missing or " + "invalid\n"); + return -EINVAL; + } + fsl_sgtl5000_dai.cpu_of_node = sai_np; + fsl_sgtl5000_dai.platform_of_node = sai_np; + + codec_np = of_parse_phandle(np, "audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "\"audio-codec\" phandle missing or " + "invalid\n"); + ret = -EINVAL; + goto sai_np_fail; + } + fsl_sgtl5000_dai.codec_of_node = codec_np; + + codec_dev = of_find_i2c_device_by_node(codec_np); + if (!codec_dev) { + dev_err(&pdev->dev, "failed to find codec platform device\n"); + ret = PTR_ERR(codec_dev); + goto codec_np_fail; + } + + codec_clk = devm_clk_get(&codec_dev->dev, NULL); + if (IS_ERR(codec_clk)) { + dev_err(&pdev->dev, "failed to get codec clock\n"); + ret = PTR_ERR(codec_clk); + goto codec_np_fail; + } + + sysclk_rate = clk_get_rate(codec_clk); + +codec_np_fail: + of_node_put(codec_np); +sai_np_fail: + of_node_put(sai_np); + + return ret; +} + +static int fsl_sgtl5000_probe(struct platform_device *pdev) +{ + int ret; + + fsl_sgt1500_card.dev = &pdev->dev; + + ret = fsl_sgtl5000_parse_dt(pdev); + if (ret) { + dev_err(&pdev->dev, + "parse sgtl5000 device tree failed :%d\n", + ret); + return ret; + } + + ret = devm_snd_soc_register_card(&pdev->dev, &fsl_sgt1500_card); + if (ret) { + dev_err(&pdev->dev, "register soc sound card failed :%d\n", + ret); + return ret; + } + + return 0; +} + +static int fsl_sgtl5000_remove(struct platform_device *pdev) +{ + snd_soc_unregister_card(&fsl_sgt1500_card); + + return 0; +} + +static const struct of_device_id fsl_sgtl5000_dt_ids[] = { + { .compatible = "fsl,vf610-sgtl5000", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_sgtl5000_dt_ids); + +static struct platform_driver fsl_sgtl5000_driver = { + .driver = { + .name = "fsl-sgtl5000", + .owner = THIS_MODULE, + .of_match_table = fsl_sgtl5000_dt_ids, + }, + .probe = fsl_sgtl5000_probe, + .remove = fsl_sgtl5000_remove, +}; +module_platform_driver(fsl_sgtl5000_driver); + +MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>"); +MODULE_DESCRIPTION("Freescale SGTL5000 ASoC driver"); +MODULE_LICENSE("GPL");