diff mbox

[v2,2/2] Input: wacom - add support for three new Intuos devices

Message ID 1381439866-1161-1-git-send-email-pingc@wacom.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ping Cheng Oct. 10, 2013, 9:17 p.m. UTC
This series of models added a hardware switch to turn touch
data on/off. To report the state of the switch, SW_TOUCH
is added in include/uapi/linux/input.h.

The driver is also updated to process wireless devices that do
not support touch interface.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
---
v2: Change SW_TOUCH_ENABLED to SW_TOUCH and clear BTN_TOUCH bit 
for button only interfaces as suggested by Peter Hutterer.
---
 drivers/input/tablet/wacom_sys.c | 16 +++++++-
 drivers/input/tablet/wacom_wac.c | 87 ++++++++++++++++++++++++++++++++--------
 drivers/input/tablet/wacom_wac.h |  7 ++++
 include/uapi/linux/input.h       |  1 +
 4 files changed, 93 insertions(+), 18 deletions(-)

Comments

Peter Hutterer Oct. 14, 2013, 12:27 a.m. UTC | #1
On Thu, Oct 10, 2013 at 02:17:46PM -0700, Ping Cheng wrote:
> This series of models added a hardware switch to turn touch
> data on/off. To report the state of the switch, SW_TOUCH
> is added in include/uapi/linux/input.h.
> 
> The driver is also updated to process wireless devices that do
> not support touch interface.
> 
> Tested-by: Jason Gerecke <killertofu@gmail.com>
> Signed-off-by: Ping Cheng <pingc@wacom.com>
> ---
> v2: Change SW_TOUCH_ENABLED to SW_TOUCH and clear BTN_TOUCH bit 
> for button only interfaces as suggested by Peter Hutterer.
> ---
>  drivers/input/tablet/wacom_sys.c | 16 +++++++-
>  drivers/input/tablet/wacom_wac.c | 87 ++++++++++++++++++++++++++++++++--------
>  drivers/input/tablet/wacom_wac.h |  7 ++++
>  include/uapi/linux/input.h       |  1 +
>  4 files changed, 93 insertions(+), 18 deletions(-)
> 

[...]

> diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
> index fd23a37..ba9e335 100644
> --- a/drivers/input/tablet/wacom_wac.h
> +++ b/drivers/input/tablet/wacom_wac.h
> @@ -54,6 +54,8 @@
>  #define WACOM_REPORT_TPCST		16
>  #define WACOM_REPORT_TPC1FGE		18
>  #define WACOM_REPORT_24HDT		1
> +#define WACOM_REPORT_WL_MODE		128
> +#define WACOM_REPORT_USB_MODE		192
>  
>  /* device quirks */
>  #define WACOM_QUIRK_MULTI_INPUT		0x0001
> @@ -81,6 +83,7 @@ enum {
>  	INTUOSPS,
>  	INTUOSPM,
>  	INTUOSPL,
> +	INTUOS_HT,

nitpick: why the underscore? all other intuos enums are one word.

Cheers,
   Peter

>  	WACOM_21UX2,
>  	WACOM_22HD,
>  	DTK,
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
chris@cnpbagwell.com Nov. 8, 2013, 2:25 a.m. UTC | #2
On Thu, Oct 10, 2013 at 4:17 PM, Ping Cheng <pinglinux@gmail.com> wrote:
> This series of models added a hardware switch to turn touch
> data on/off. To report the state of the switch, SW_TOUCH
> is added in include/uapi/linux/input.h.

So I guess the big point is this patch can't go in until a SW_TOUCH
goes in first.

Since the 1/2 or this 2/2 series has already gone in, would you mind
breaking this
remaining patch up into the basic support for new Intuos (without the
SW_TOUCH) and
then a separate patch to add SW_TOUCH support on top of that?  Then
the basic support can go in ASAP.

I only have comments on this patch related to the SW_TOUCH part... things like:

 * should the SW_TOUCH be reported against the wireless interface or
the touch interface... userland apps may have an opinion on which is
best.
 * the part with updating SW_TOUCH from unrelated interfaces could use
a review by someone like Dmitry for possible issues.
 * It would be better if you didn't add that EV_SW for HW that will
not report the SW_TOUCH.

If you break the patch into 2, you can add my line for the basic
support without SW_TOUCH:

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>

Chris

>
> The driver is also updated to process wireless devices that do
> not support touch interface.
>
> Tested-by: Jason Gerecke <killertofu@gmail.com>
> Signed-off-by: Ping Cheng <pingc@wacom.com>
> ---
> v2: Change SW_TOUCH_ENABLED to SW_TOUCH and clear BTN_TOUCH bit
> for button only interfaces as suggested by Peter Hutterer.
> ---
>  drivers/input/tablet/wacom_sys.c | 16 +++++++-
>  drivers/input/tablet/wacom_wac.c | 87 ++++++++++++++++++++++++++++++++--------
>  drivers/input/tablet/wacom_wac.h |  7 ++++
>  include/uapi/linux/input.h       |  1 +
>  4 files changed, 93 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
> index 7bdb5e9..efd9729 100644
> --- a/drivers/input/tablet/wacom_sys.c
> +++ b/drivers/input/tablet/wacom_sys.c
> @@ -1190,12 +1190,15 @@ static void wacom_wireless_work(struct work_struct *work)
>                 wacom_wac1->features.device_type = BTN_TOOL_PEN;
>                 snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
>                          wacom_wac1->features.name);
> +               wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
> +               wacom_wac1->shared->type = wacom_wac1->features.type;
>                 error = wacom_register_input(wacom1);
>                 if (error)
>                         goto fail;
>
>                 /* Touch interface */
> -               if (wacom_wac1->features.touch_max) {
> +               if (wacom_wac1->features.touch_max ||
> +                   wacom_wac1->features.type == INTUOS_HT) {
>                         wacom_wac2->features =
>                                 *((struct wacom_features *)id->driver_info);
>                         wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
> @@ -1210,6 +1213,10 @@ static void wacom_wireless_work(struct work_struct *work)
>                         error = wacom_register_input(wacom2);
>                         if (error)
>                                 goto fail;
> +
> +                       if (wacom_wac1->features.type == INTUOS_HT &&
> +                           wacom_wac1->features.touch_max)
> +                               wacom_wac->shared->touch_input = wacom_wac2->input;
>                 }
>
>                 error = wacom_initialize_battery(wacom);
> @@ -1318,7 +1325,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
>          * HID descriptor. If this is the touch interface (wMaxPacketSize
>          * of WACOM_PKGLEN_BBTOUCH3), override the table values.
>          */
> -       if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
> +       if (features->type >= INTUOS5S && features->type <= INTUOS_HT) {
>                 if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
>                         features->device_type = BTN_TOOL_FINGER;
>                         features->pktlen = WACOM_PKGLEN_BBTOUCH3;
> @@ -1390,6 +1397,11 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
>                 }
>         }
>
> +       if (wacom_wac->features.type == INTUOS_HT && wacom_wac->features.touch_max) {
> +               if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
> +                       wacom_wac->shared->touch_input = wacom_wac->input;
> +       }
> +
>         return 0;
>
>   fail5: wacom_destroy_leds(wacom);
> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
> index 9c8eded..4cbea85 100644
> --- a/drivers/input/tablet/wacom_wac.c
> +++ b/drivers/input/tablet/wacom_wac.c
> @@ -1176,10 +1176,17 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
>  static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
>  {
>         struct input_dev *input = wacom->input;
> +       struct wacom_features *features = &wacom->features;
>
> -       input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
> +       if (features->type == INTUOS_HT) {
> +               input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
> +               input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
> +       } else {
> +
> +               input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
> +               input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
> +       }
>         input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
> -       input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
>         input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
>  }
>
> @@ -1213,13 +1220,23 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
>
>  static int wacom_bpt_pen(struct wacom_wac *wacom)
>  {
> +       struct wacom_features *features = &wacom->features;
>         struct input_dev *input = wacom->input;
>         unsigned char *data = wacom->data;
>         int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
>
> -       if (data[0] != 0x02)
> +       if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB_MODE)
>             return 0;
>
> +       if (data[0] == WACOM_REPORT_USB_MODE) {
> +               if ((features->type == INTUOS_HT) && features->touch_max) {
> +                       input_report_switch(wacom->shared->touch_input,
> +                                           SW_TOUCH, data[8] & 0x40);
> +                       input_sync(wacom->shared->touch_input);
> +               }
> +               return 0;
> +       }
> +
>         prox = (data[1] & 0x20) == 0x20;
>
>         /*
> @@ -1297,13 +1314,20 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
>         unsigned char *data = wacom->data;
>         int connected;
>
> -       if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
> +       if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL_MODE)
>                 return 0;
>
>         connected = data[1] & 0x01;
>         if (connected) {
>                 int pid, battery;
>
> +               if ((wacom->shared->type == INTUOS_HT) &&
> +                               wacom->shared->touch_max) {
> +                       input_report_switch(wacom->shared->touch_input,
> +                                       SW_TOUCH, data[5] & 0x40);
> +                       input_sync(wacom->shared->touch_input);
> +               }
> +
>                 pid = get_unaligned_be16(&data[6]);
>                 battery = data[5] & 0x3f;
>                 if (wacom->pid != pid) {
> @@ -1391,6 +1415,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
>                 break;
>
>         case BAMBOO_PT:
> +       case INTUOS_HT:
>                 sync = wacom_bpt_irq(wacom_wac, len);
>                 break;
>
> @@ -1459,7 +1484,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
>
>         /* these device have multiple inputs */
>         if (features->type >= WIRELESS ||
> -           (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
> +           (features->type >= INTUOS5S && features->type <= INTUOS_HT) ||
>             (features->oVid && features->oPid))
>                 features->quirks |= WACOM_QUIRK_MULTI_INPUT;
>
> @@ -1531,7 +1556,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>         struct wacom_features *features = &wacom_wac->features;
>         int i;
>
> -       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> +       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
> +                              BIT_MASK(EV_SW);
>
>         __set_bit(BTN_TOUCH, input_dev->keybit);
>         __set_bit(ABS_MISC, input_dev->absbit);
> @@ -1771,33 +1797,48 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>                 __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>                 break;
>
> +       case INTUOS_HT:
> +               if (features->touch_max &&
> +                   (features->device_type == BTN_TOOL_FINGER))
> +                       __set_bit(SW_TOUCH, input_dev->swbit);
> +               /* fall through */
> +
>         case BAMBOO_PT:
>                 __clear_bit(ABS_MISC, input_dev->absbit);
>
> -               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> -
>                 if (features->device_type == BTN_TOOL_FINGER) {
> -                       unsigned int flags = INPUT_MT_POINTER;
>
>                         __set_bit(BTN_LEFT, input_dev->keybit);
>                         __set_bit(BTN_FORWARD, input_dev->keybit);
>                         __set_bit(BTN_BACK, input_dev->keybit);
>                         __set_bit(BTN_RIGHT, input_dev->keybit);
>
> -                       if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
> -                               input_set_abs_params(input_dev,
> +                       if (features->touch_max) {
> +                               /* touch interface */
> +                               unsigned int flags = INPUT_MT_POINTER;
> +
> +                               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> +                               if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
> +                                       input_set_abs_params(input_dev,
>                                                      ABS_MT_TOUCH_MAJOR,
>                                                      0, features->x_max, 0, 0);
> -                               input_set_abs_params(input_dev,
> +                                       input_set_abs_params(input_dev,
>                                                      ABS_MT_TOUCH_MINOR,
>                                                      0, features->y_max, 0, 0);
> +                               } else {
> +                                       __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
> +                                       __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
> +                                       flags = 0;
> +                               }
> +                               input_mt_init_slots(input_dev, features->touch_max, flags);
>                         } else {
> -                               __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
> -                               __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
> -                               flags = 0;
> +                               /* buttons/keys only interface */
> +                               __clear_bit(ABS_X, input_dev->absbit);
> +                               __clear_bit(ABS_Y, input_dev->absbit);
> +                               __clear_bit(BTN_TOUCH, input_dev->keybit);
>                         }
> -                       input_mt_init_slots(input_dev, features->touch_max, flags);
>                 } else if (features->device_type == BTN_TOOL_PEN) {
> +                       __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>                         __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
>                         __set_bit(BTN_TOOL_PEN, input_dev->keybit);
>                         __set_bit(BTN_STYLUS, input_dev->keybit);
> @@ -2194,6 +2235,17 @@ static const struct wacom_features wacom_features_0x300 =
>  static const struct wacom_features wacom_features_0x301 =
>         { "Wacom Bamboo One M",    WACOM_PKGLEN_BBPEN,    21648, 13530, 1023,
>           31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
> +static const struct wacom_features wacom_features_0x302 =
> +       { "Wacom Intuos PT S",     WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
> +         .touch_max = 16 };
> +static const struct wacom_features wacom_features_0x303 =
> +       { "Wacom Intuos PT M",     WACOM_PKGLEN_BBPEN,    21600, 13500, 1023,
> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
> +         .touch_max = 16 };
> +static const struct wacom_features wacom_features_0x30E =
> +       { "Wacom Intuos S",        WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
>  static const struct wacom_features wacom_features_0x6004 =
>         { "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
>           0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
> @@ -2329,6 +2381,9 @@ const struct usb_device_id wacom_ids[] = {
>         { USB_DEVICE_WACOM(0x10D) },
>         { USB_DEVICE_WACOM(0x300) },
>         { USB_DEVICE_WACOM(0x301) },
> +       { USB_DEVICE_WACOM(0x302) },
> +       { USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
> +       { USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
>         { USB_DEVICE_WACOM(0x304) },
>         { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
>         { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
> diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
> index fd23a37..ba9e335 100644
> --- a/drivers/input/tablet/wacom_wac.h
> +++ b/drivers/input/tablet/wacom_wac.h
> @@ -54,6 +54,8 @@
>  #define WACOM_REPORT_TPCST             16
>  #define WACOM_REPORT_TPC1FGE           18
>  #define WACOM_REPORT_24HDT             1
> +#define WACOM_REPORT_WL_MODE           128
> +#define WACOM_REPORT_USB_MODE          192
>
>  /* device quirks */
>  #define WACOM_QUIRK_MULTI_INPUT                0x0001
> @@ -81,6 +83,7 @@ enum {
>         INTUOSPS,
>         INTUOSPM,
>         INTUOSPL,
> +       INTUOS_HT,
>         WACOM_21UX2,
>         WACOM_22HD,
>         DTK,
> @@ -129,6 +132,10 @@ struct wacom_features {
>  struct wacom_shared {
>         bool stylus_in_proximity;
>         bool touch_down;
> +       /* for wireless device to access USB interfaces */
> +       unsigned touch_max;
> +       int type;
> +       struct input_dev *touch_input;
>  };
>
>  struct wacom_wac {
> diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
> index d08abf9..70e53e8 100644
> --- a/include/uapi/linux/input.h
> +++ b/include/uapi/linux/input.h
> @@ -855,6 +855,7 @@ struct input_keymap_entry {
>  #define SW_FRONT_PROXIMITY     0x0b  /* set = front proximity sensor active */
>  #define SW_ROTATE_LOCK         0x0c  /* set = rotate locked/disabled */
>  #define SW_LINEIN_INSERT       0x0d  /* set = inserted */
> +#define SW_TOUCH               0x0e  /* set = touch switch turned on (touch events off) */
>  #define SW_MAX                 0x0f
>  #define SW_CNT                 (SW_MAX+1)
>
> --
> 1.8.1.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ping Cheng Nov. 8, 2013, 7:13 p.m. UTC | #3
On Thu, Nov 7, 2013 at 6:25 PM, Chris Bagwell <chris@cnpbagwell.com> wrote:
> On Thu, Oct 10, 2013 at 4:17 PM, Ping Cheng <pinglinux@gmail.com> wrote:
>> This series of models added a hardware switch to turn touch
>> data on/off. To report the state of the switch, SW_TOUCH
>> is added in include/uapi/linux/input.h.
>
> So I guess the big point is this patch can't go in until a SW_TOUCH
> goes in first.
>
> Since the 1/2 or this 2/2 series has already gone in, would you mind
> breaking this
> remaining patch up into the basic support for new Intuos (without the
> SW_TOUCH) and
> then a separate patch to add SW_TOUCH support on top of that?  Then
> the basic support can go in ASAP.

Chris, thank you for pushing the process forward.

SW_TOUCH is truly part of the basic support for the new series. The
main new feature of this series is touch switch. If we do not report
its status in the same patch, it means we are not reporting a complete
set of data.

> I only have comments on this patch related to the SW_TOUCH part... things like:
>
>  * should the SW_TOUCH be reported against the wireless interface or
> the touch interface... userland apps may have an opinion on which is
> best.

We can not report SW_TOUCH status from touch interface since once
touch is turned off (by end users), no events can go on touch
interface. Plus, we do not know when a user may switch touch on.
That's why SW_TOUCH are regularly updated and reported through
wireless interface for wireless connection.

>  * the part with updating SW_TOUCH from unrelated interfaces could use

It is not unrelated interface. It is how it works.

> a review by someone like Dmitry for possible issues.
>  * It would be better if you didn't add that EV_SW for HW that will
> not report the SW_TOUCH.

I can consider that in the next version.

> If you break the patch into 2, you can add my line for the basic

I'd like to know your opinion about my comments before updating the
patch. IMO, using two patches to process one set of raw data
complicates the support.

Ping

> support without SW_TOUCH:
>
> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
>
> Chris
>
>>
>> The driver is also updated to process wireless devices that do
>> not support touch interface.
>>
>> Tested-by: Jason Gerecke <killertofu@gmail.com>
>> Signed-off-by: Ping Cheng <pingc@wacom.com>
>> ---
>> v2: Change SW_TOUCH_ENABLED to SW_TOUCH and clear BTN_TOUCH bit
>> for button only interfaces as suggested by Peter Hutterer.
>> ---
>>  drivers/input/tablet/wacom_sys.c | 16 +++++++-
>>  drivers/input/tablet/wacom_wac.c | 87 ++++++++++++++++++++++++++++++++--------
>>  drivers/input/tablet/wacom_wac.h |  7 ++++
>>  include/uapi/linux/input.h       |  1 +
>>  4 files changed, 93 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
>> index 7bdb5e9..efd9729 100644
>> --- a/drivers/input/tablet/wacom_sys.c
>> +++ b/drivers/input/tablet/wacom_sys.c
>> @@ -1190,12 +1190,15 @@ static void wacom_wireless_work(struct work_struct *work)
>>                 wacom_wac1->features.device_type = BTN_TOOL_PEN;
>>                 snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
>>                          wacom_wac1->features.name);
>> +               wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
>> +               wacom_wac1->shared->type = wacom_wac1->features.type;
>>                 error = wacom_register_input(wacom1);
>>                 if (error)
>>                         goto fail;
>>
>>                 /* Touch interface */
>> -               if (wacom_wac1->features.touch_max) {
>> +               if (wacom_wac1->features.touch_max ||
>> +                   wacom_wac1->features.type == INTUOS_HT) {
>>                         wacom_wac2->features =
>>                                 *((struct wacom_features *)id->driver_info);
>>                         wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
>> @@ -1210,6 +1213,10 @@ static void wacom_wireless_work(struct work_struct *work)
>>                         error = wacom_register_input(wacom2);
>>                         if (error)
>>                                 goto fail;
>> +
>> +                       if (wacom_wac1->features.type == INTUOS_HT &&
>> +                           wacom_wac1->features.touch_max)
>> +                               wacom_wac->shared->touch_input = wacom_wac2->input;
>>                 }
>>
>>                 error = wacom_initialize_battery(wacom);
>> @@ -1318,7 +1325,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
>>          * HID descriptor. If this is the touch interface (wMaxPacketSize
>>          * of WACOM_PKGLEN_BBTOUCH3), override the table values.
>>          */
>> -       if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
>> +       if (features->type >= INTUOS5S && features->type <= INTUOS_HT) {
>>                 if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
>>                         features->device_type = BTN_TOOL_FINGER;
>>                         features->pktlen = WACOM_PKGLEN_BBTOUCH3;
>> @@ -1390,6 +1397,11 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
>>                 }
>>         }
>>
>> +       if (wacom_wac->features.type == INTUOS_HT && wacom_wac->features.touch_max) {
>> +               if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
>> +                       wacom_wac->shared->touch_input = wacom_wac->input;
>> +       }
>> +
>>         return 0;
>>
>>   fail5: wacom_destroy_leds(wacom);
>> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
>> index 9c8eded..4cbea85 100644
>> --- a/drivers/input/tablet/wacom_wac.c
>> +++ b/drivers/input/tablet/wacom_wac.c
>> @@ -1176,10 +1176,17 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
>>  static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
>>  {
>>         struct input_dev *input = wacom->input;
>> +       struct wacom_features *features = &wacom->features;
>>
>> -       input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
>> +       if (features->type == INTUOS_HT) {
>> +               input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
>> +               input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
>> +       } else {
>> +
>> +               input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
>> +               input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
>> +       }
>>         input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
>> -       input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
>>         input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
>>  }
>>
>> @@ -1213,13 +1220,23 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
>>
>>  static int wacom_bpt_pen(struct wacom_wac *wacom)
>>  {
>> +       struct wacom_features *features = &wacom->features;
>>         struct input_dev *input = wacom->input;
>>         unsigned char *data = wacom->data;
>>         int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
>>
>> -       if (data[0] != 0x02)
>> +       if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB_MODE)
>>             return 0;
>>
>> +       if (data[0] == WACOM_REPORT_USB_MODE) {
>> +               if ((features->type == INTUOS_HT) && features->touch_max) {
>> +                       input_report_switch(wacom->shared->touch_input,
>> +                                           SW_TOUCH, data[8] & 0x40);
>> +                       input_sync(wacom->shared->touch_input);
>> +               }
>> +               return 0;
>> +       }
>> +
>>         prox = (data[1] & 0x20) == 0x20;
>>
>>         /*
>> @@ -1297,13 +1314,20 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
>>         unsigned char *data = wacom->data;
>>         int connected;
>>
>> -       if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
>> +       if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL_MODE)
>>                 return 0;
>>
>>         connected = data[1] & 0x01;
>>         if (connected) {
>>                 int pid, battery;
>>
>> +               if ((wacom->shared->type == INTUOS_HT) &&
>> +                               wacom->shared->touch_max) {
>> +                       input_report_switch(wacom->shared->touch_input,
>> +                                       SW_TOUCH, data[5] & 0x40);
>> +                       input_sync(wacom->shared->touch_input);
>> +               }
>> +
>>                 pid = get_unaligned_be16(&data[6]);
>>                 battery = data[5] & 0x3f;
>>                 if (wacom->pid != pid) {
>> @@ -1391,6 +1415,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
>>                 break;
>>
>>         case BAMBOO_PT:
>> +       case INTUOS_HT:
>>                 sync = wacom_bpt_irq(wacom_wac, len);
>>                 break;
>>
>> @@ -1459,7 +1484,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
>>
>>         /* these device have multiple inputs */
>>         if (features->type >= WIRELESS ||
>> -           (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
>> +           (features->type >= INTUOS5S && features->type <= INTUOS_HT) ||
>>             (features->oVid && features->oPid))
>>                 features->quirks |= WACOM_QUIRK_MULTI_INPUT;
>>
>> @@ -1531,7 +1556,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>>         struct wacom_features *features = &wacom_wac->features;
>>         int i;
>>
>> -       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
>> +       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
>> +                              BIT_MASK(EV_SW);
>>
>>         __set_bit(BTN_TOUCH, input_dev->keybit);
>>         __set_bit(ABS_MISC, input_dev->absbit);
>> @@ -1771,33 +1797,48 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>>                 __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>>                 break;
>>
>> +       case INTUOS_HT:
>> +               if (features->touch_max &&
>> +                   (features->device_type == BTN_TOOL_FINGER))
>> +                       __set_bit(SW_TOUCH, input_dev->swbit);
>> +               /* fall through */
>> +
>>         case BAMBOO_PT:
>>                 __clear_bit(ABS_MISC, input_dev->absbit);
>>
>> -               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>> -
>>                 if (features->device_type == BTN_TOOL_FINGER) {
>> -                       unsigned int flags = INPUT_MT_POINTER;
>>
>>                         __set_bit(BTN_LEFT, input_dev->keybit);
>>                         __set_bit(BTN_FORWARD, input_dev->keybit);
>>                         __set_bit(BTN_BACK, input_dev->keybit);
>>                         __set_bit(BTN_RIGHT, input_dev->keybit);
>>
>> -                       if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
>> -                               input_set_abs_params(input_dev,
>> +                       if (features->touch_max) {
>> +                               /* touch interface */
>> +                               unsigned int flags = INPUT_MT_POINTER;
>> +
>> +                               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>> +                               if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
>> +                                       input_set_abs_params(input_dev,
>>                                                      ABS_MT_TOUCH_MAJOR,
>>                                                      0, features->x_max, 0, 0);
>> -                               input_set_abs_params(input_dev,
>> +                                       input_set_abs_params(input_dev,
>>                                                      ABS_MT_TOUCH_MINOR,
>>                                                      0, features->y_max, 0, 0);
>> +                               } else {
>> +                                       __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
>> +                                       __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
>> +                                       flags = 0;
>> +                               }
>> +                               input_mt_init_slots(input_dev, features->touch_max, flags);
>>                         } else {
>> -                               __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
>> -                               __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
>> -                               flags = 0;
>> +                               /* buttons/keys only interface */
>> +                               __clear_bit(ABS_X, input_dev->absbit);
>> +                               __clear_bit(ABS_Y, input_dev->absbit);
>> +                               __clear_bit(BTN_TOUCH, input_dev->keybit);
>>                         }
>> -                       input_mt_init_slots(input_dev, features->touch_max, flags);
>>                 } else if (features->device_type == BTN_TOOL_PEN) {
>> +                       __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>>                         __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
>>                         __set_bit(BTN_TOOL_PEN, input_dev->keybit);
>>                         __set_bit(BTN_STYLUS, input_dev->keybit);
>> @@ -2194,6 +2235,17 @@ static const struct wacom_features wacom_features_0x300 =
>>  static const struct wacom_features wacom_features_0x301 =
>>         { "Wacom Bamboo One M",    WACOM_PKGLEN_BBPEN,    21648, 13530, 1023,
>>           31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
>> +static const struct wacom_features wacom_features_0x302 =
>> +       { "Wacom Intuos PT S",     WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
>> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
>> +         .touch_max = 16 };
>> +static const struct wacom_features wacom_features_0x303 =
>> +       { "Wacom Intuos PT M",     WACOM_PKGLEN_BBPEN,    21600, 13500, 1023,
>> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
>> +         .touch_max = 16 };
>> +static const struct wacom_features wacom_features_0x30E =
>> +       { "Wacom Intuos S",        WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
>> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
>>  static const struct wacom_features wacom_features_0x6004 =
>>         { "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
>>           0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
>> @@ -2329,6 +2381,9 @@ const struct usb_device_id wacom_ids[] = {
>>         { USB_DEVICE_WACOM(0x10D) },
>>         { USB_DEVICE_WACOM(0x300) },
>>         { USB_DEVICE_WACOM(0x301) },
>> +       { USB_DEVICE_WACOM(0x302) },
>> +       { USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
>> +       { USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
>>         { USB_DEVICE_WACOM(0x304) },
>>         { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
>>         { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
>> diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
>> index fd23a37..ba9e335 100644
>> --- a/drivers/input/tablet/wacom_wac.h
>> +++ b/drivers/input/tablet/wacom_wac.h
>> @@ -54,6 +54,8 @@
>>  #define WACOM_REPORT_TPCST             16
>>  #define WACOM_REPORT_TPC1FGE           18
>>  #define WACOM_REPORT_24HDT             1
>> +#define WACOM_REPORT_WL_MODE           128
>> +#define WACOM_REPORT_USB_MODE          192
>>
>>  /* device quirks */
>>  #define WACOM_QUIRK_MULTI_INPUT                0x0001
>> @@ -81,6 +83,7 @@ enum {
>>         INTUOSPS,
>>         INTUOSPM,
>>         INTUOSPL,
>> +       INTUOS_HT,
>>         WACOM_21UX2,
>>         WACOM_22HD,
>>         DTK,
>> @@ -129,6 +132,10 @@ struct wacom_features {
>>  struct wacom_shared {
>>         bool stylus_in_proximity;
>>         bool touch_down;
>> +       /* for wireless device to access USB interfaces */
>> +       unsigned touch_max;
>> +       int type;
>> +       struct input_dev *touch_input;
>>  };
>>
>>  struct wacom_wac {
>> diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
>> index d08abf9..70e53e8 100644
>> --- a/include/uapi/linux/input.h
>> +++ b/include/uapi/linux/input.h
>> @@ -855,6 +855,7 @@ struct input_keymap_entry {
>>  #define SW_FRONT_PROXIMITY     0x0b  /* set = front proximity sensor active */
>>  #define SW_ROTATE_LOCK         0x0c  /* set = rotate locked/disabled */
>>  #define SW_LINEIN_INSERT       0x0d  /* set = inserted */
>> +#define SW_TOUCH               0x0e  /* set = touch switch turned on (touch events off) */
>>  #define SW_MAX                 0x0f
>>  #define SW_CNT                 (SW_MAX+1)
>>
>> --
>> 1.8.1.2
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Peter Hutterer Nov. 12, 2013, 12:56 a.m. UTC | #4
On Thu, Nov 07, 2013 at 08:25:40PM -0600, Chris Bagwell wrote:
> On Thu, Oct 10, 2013 at 4:17 PM, Ping Cheng <pinglinux@gmail.com> wrote:
> > This series of models added a hardware switch to turn touch
> > data on/off. To report the state of the switch, SW_TOUCH
> > is added in include/uapi/linux/input.h.
> 
> So I guess the big point is this patch can't go in until a SW_TOUCH
> goes in first.
> 
> Since the 1/2 or this 2/2 series has already gone in, would you mind
> breaking this
> remaining patch up into the basic support for new Intuos (without the
> SW_TOUCH) and
> then a separate patch to add SW_TOUCH support on top of that?  Then
> the basic support can go in ASAP.
> 
> I only have comments on this patch related to the SW_TOUCH part... things like:
> 
>  * should the SW_TOUCH be reported against the wireless interface or
> the touch interface... userland apps may have an opinion on which is
> best.

against the touch device. from userspace, seeing that something is a touch
device but SW_TOUCH is off is a lot easier to deal with than having a
separate device report SW_TOUCH and we'll have to find the matching
userspace device this applies to.
(unless I'm misreading something here)

>  * the part with updating SW_TOUCH from unrelated interfaces could use
> a review by someone like Dmitry for possible issues.
>  * It would be better if you didn't add that EV_SW for HW that will
> not report the SW_TOUCH.

definitely agree here.

I still don't think that changing the INTUOS naming convention to use
underscores is a good idea given that in a year's time no-one will care that
some intuos used to be bamboos but we'll be stuck with the mismatched naming
scheme for a while.

Acked-by: Peter Hutterer <peter.hutterer@who-t.net> otherwise though

Cheers,
   Peter

> If you break the patch into 2, you can add my line for the basic
> support without SW_TOUCH:
> 
> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
> 
> Chris
> 
> >
> > The driver is also updated to process wireless devices that do
> > not support touch interface.
> >
> > Tested-by: Jason Gerecke <killertofu@gmail.com>
> > Signed-off-by: Ping Cheng <pingc@wacom.com>
> > ---
> > v2: Change SW_TOUCH_ENABLED to SW_TOUCH and clear BTN_TOUCH bit
> > for button only interfaces as suggested by Peter Hutterer.
> > ---
> >  drivers/input/tablet/wacom_sys.c | 16 +++++++-
> >  drivers/input/tablet/wacom_wac.c | 87 ++++++++++++++++++++++++++++++++--------
> >  drivers/input/tablet/wacom_wac.h |  7 ++++
> >  include/uapi/linux/input.h       |  1 +
> >  4 files changed, 93 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
> > index 7bdb5e9..efd9729 100644
> > --- a/drivers/input/tablet/wacom_sys.c
> > +++ b/drivers/input/tablet/wacom_sys.c
> > @@ -1190,12 +1190,15 @@ static void wacom_wireless_work(struct work_struct *work)
> >                 wacom_wac1->features.device_type = BTN_TOOL_PEN;
> >                 snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
> >                          wacom_wac1->features.name);
> > +               wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
> > +               wacom_wac1->shared->type = wacom_wac1->features.type;
> >                 error = wacom_register_input(wacom1);
> >                 if (error)
> >                         goto fail;
> >
> >                 /* Touch interface */
> > -               if (wacom_wac1->features.touch_max) {
> > +               if (wacom_wac1->features.touch_max ||
> > +                   wacom_wac1->features.type == INTUOS_HT) {
> >                         wacom_wac2->features =
> >                                 *((struct wacom_features *)id->driver_info);
> >                         wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
> > @@ -1210,6 +1213,10 @@ static void wacom_wireless_work(struct work_struct *work)
> >                         error = wacom_register_input(wacom2);
> >                         if (error)
> >                                 goto fail;
> > +
> > +                       if (wacom_wac1->features.type == INTUOS_HT &&
> > +                           wacom_wac1->features.touch_max)
> > +                               wacom_wac->shared->touch_input = wacom_wac2->input;
> >                 }
> >
> >                 error = wacom_initialize_battery(wacom);
> > @@ -1318,7 +1325,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
> >          * HID descriptor. If this is the touch interface (wMaxPacketSize
> >          * of WACOM_PKGLEN_BBTOUCH3), override the table values.
> >          */
> > -       if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
> > +       if (features->type >= INTUOS5S && features->type <= INTUOS_HT) {
> >                 if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
> >                         features->device_type = BTN_TOOL_FINGER;
> >                         features->pktlen = WACOM_PKGLEN_BBTOUCH3;
> > @@ -1390,6 +1397,11 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
> >                 }
> >         }
> >
> > +       if (wacom_wac->features.type == INTUOS_HT && wacom_wac->features.touch_max) {
> > +               if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
> > +                       wacom_wac->shared->touch_input = wacom_wac->input;
> > +       }
> > +
> >         return 0;
> >
> >   fail5: wacom_destroy_leds(wacom);
> > diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
> > index 9c8eded..4cbea85 100644
> > --- a/drivers/input/tablet/wacom_wac.c
> > +++ b/drivers/input/tablet/wacom_wac.c
> > @@ -1176,10 +1176,17 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
> >  static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
> >  {
> >         struct input_dev *input = wacom->input;
> > +       struct wacom_features *features = &wacom->features;
> >
> > -       input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
> > +       if (features->type == INTUOS_HT) {
> > +               input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
> > +               input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
> > +       } else {
> > +
> > +               input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
> > +               input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
> > +       }
> >         input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
> > -       input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
> >         input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
> >  }
> >
> > @@ -1213,13 +1220,23 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
> >
> >  static int wacom_bpt_pen(struct wacom_wac *wacom)
> >  {
> > +       struct wacom_features *features = &wacom->features;
> >         struct input_dev *input = wacom->input;
> >         unsigned char *data = wacom->data;
> >         int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
> >
> > -       if (data[0] != 0x02)
> > +       if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB_MODE)
> >             return 0;
> >
> > +       if (data[0] == WACOM_REPORT_USB_MODE) {
> > +               if ((features->type == INTUOS_HT) && features->touch_max) {
> > +                       input_report_switch(wacom->shared->touch_input,
> > +                                           SW_TOUCH, data[8] & 0x40);
> > +                       input_sync(wacom->shared->touch_input);
> > +               }
> > +               return 0;
> > +       }
> > +
> >         prox = (data[1] & 0x20) == 0x20;
> >
> >         /*
> > @@ -1297,13 +1314,20 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
> >         unsigned char *data = wacom->data;
> >         int connected;
> >
> > -       if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
> > +       if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL_MODE)
> >                 return 0;
> >
> >         connected = data[1] & 0x01;
> >         if (connected) {
> >                 int pid, battery;
> >
> > +               if ((wacom->shared->type == INTUOS_HT) &&
> > +                               wacom->shared->touch_max) {
> > +                       input_report_switch(wacom->shared->touch_input,
> > +                                       SW_TOUCH, data[5] & 0x40);
> > +                       input_sync(wacom->shared->touch_input);
> > +               }
> > +
> >                 pid = get_unaligned_be16(&data[6]);
> >                 battery = data[5] & 0x3f;
> >                 if (wacom->pid != pid) {
> > @@ -1391,6 +1415,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
> >                 break;
> >
> >         case BAMBOO_PT:
> > +       case INTUOS_HT:
> >                 sync = wacom_bpt_irq(wacom_wac, len);
> >                 break;
> >
> > @@ -1459,7 +1484,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
> >
> >         /* these device have multiple inputs */
> >         if (features->type >= WIRELESS ||
> > -           (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
> > +           (features->type >= INTUOS5S && features->type <= INTUOS_HT) ||
> >             (features->oVid && features->oPid))
> >                 features->quirks |= WACOM_QUIRK_MULTI_INPUT;
> >
> > @@ -1531,7 +1556,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
> >         struct wacom_features *features = &wacom_wac->features;
> >         int i;
> >
> > -       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> > +       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
> > +                              BIT_MASK(EV_SW);
> >
> >         __set_bit(BTN_TOUCH, input_dev->keybit);
> >         __set_bit(ABS_MISC, input_dev->absbit);
> > @@ -1771,33 +1797,48 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
> >                 __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> >                 break;
> >
> > +       case INTUOS_HT:
> > +               if (features->touch_max &&
> > +                   (features->device_type == BTN_TOOL_FINGER))
> > +                       __set_bit(SW_TOUCH, input_dev->swbit);
> > +               /* fall through */
> > +
> >         case BAMBOO_PT:
> >                 __clear_bit(ABS_MISC, input_dev->absbit);
> >
> > -               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> > -
> >                 if (features->device_type == BTN_TOOL_FINGER) {
> > -                       unsigned int flags = INPUT_MT_POINTER;
> >
> >                         __set_bit(BTN_LEFT, input_dev->keybit);
> >                         __set_bit(BTN_FORWARD, input_dev->keybit);
> >                         __set_bit(BTN_BACK, input_dev->keybit);
> >                         __set_bit(BTN_RIGHT, input_dev->keybit);
> >
> > -                       if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
> > -                               input_set_abs_params(input_dev,
> > +                       if (features->touch_max) {
> > +                               /* touch interface */
> > +                               unsigned int flags = INPUT_MT_POINTER;
> > +
> > +                               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> > +                               if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
> > +                                       input_set_abs_params(input_dev,
> >                                                      ABS_MT_TOUCH_MAJOR,
> >                                                      0, features->x_max, 0, 0);
> > -                               input_set_abs_params(input_dev,
> > +                                       input_set_abs_params(input_dev,
> >                                                      ABS_MT_TOUCH_MINOR,
> >                                                      0, features->y_max, 0, 0);
> > +                               } else {
> > +                                       __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
> > +                                       __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
> > +                                       flags = 0;
> > +                               }
> > +                               input_mt_init_slots(input_dev, features->touch_max, flags);
> >                         } else {
> > -                               __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
> > -                               __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
> > -                               flags = 0;
> > +                               /* buttons/keys only interface */
> > +                               __clear_bit(ABS_X, input_dev->absbit);
> > +                               __clear_bit(ABS_Y, input_dev->absbit);
> > +                               __clear_bit(BTN_TOUCH, input_dev->keybit);
> >                         }
> > -                       input_mt_init_slots(input_dev, features->touch_max, flags);
> >                 } else if (features->device_type == BTN_TOOL_PEN) {
> > +                       __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> >                         __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
> >                         __set_bit(BTN_TOOL_PEN, input_dev->keybit);
> >                         __set_bit(BTN_STYLUS, input_dev->keybit);
> > @@ -2194,6 +2235,17 @@ static const struct wacom_features wacom_features_0x300 =
> >  static const struct wacom_features wacom_features_0x301 =
> >         { "Wacom Bamboo One M",    WACOM_PKGLEN_BBPEN,    21648, 13530, 1023,
> >           31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
> > +static const struct wacom_features wacom_features_0x302 =
> > +       { "Wacom Intuos PT S",     WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
> > +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
> > +         .touch_max = 16 };
> > +static const struct wacom_features wacom_features_0x303 =
> > +       { "Wacom Intuos PT M",     WACOM_PKGLEN_BBPEN,    21600, 13500, 1023,
> > +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
> > +         .touch_max = 16 };
> > +static const struct wacom_features wacom_features_0x30E =
> > +       { "Wacom Intuos S",        WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
> > +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
> >  static const struct wacom_features wacom_features_0x6004 =
> >         { "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
> >           0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
> > @@ -2329,6 +2381,9 @@ const struct usb_device_id wacom_ids[] = {
> >         { USB_DEVICE_WACOM(0x10D) },
> >         { USB_DEVICE_WACOM(0x300) },
> >         { USB_DEVICE_WACOM(0x301) },
> > +       { USB_DEVICE_WACOM(0x302) },
> > +       { USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
> > +       { USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
> >         { USB_DEVICE_WACOM(0x304) },
> >         { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
> >         { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
> > diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
> > index fd23a37..ba9e335 100644
> > --- a/drivers/input/tablet/wacom_wac.h
> > +++ b/drivers/input/tablet/wacom_wac.h
> > @@ -54,6 +54,8 @@
> >  #define WACOM_REPORT_TPCST             16
> >  #define WACOM_REPORT_TPC1FGE           18
> >  #define WACOM_REPORT_24HDT             1
> > +#define WACOM_REPORT_WL_MODE           128
> > +#define WACOM_REPORT_USB_MODE          192
> >
> >  /* device quirks */
> >  #define WACOM_QUIRK_MULTI_INPUT                0x0001
> > @@ -81,6 +83,7 @@ enum {
> >         INTUOSPS,
> >         INTUOSPM,
> >         INTUOSPL,
> > +       INTUOS_HT,
> >         WACOM_21UX2,
> >         WACOM_22HD,
> >         DTK,
> > @@ -129,6 +132,10 @@ struct wacom_features {
> >  struct wacom_shared {
> >         bool stylus_in_proximity;
> >         bool touch_down;
> > +       /* for wireless device to access USB interfaces */
> > +       unsigned touch_max;
> > +       int type;
> > +       struct input_dev *touch_input;
> >  };
> >
> >  struct wacom_wac {
> > diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
> > index d08abf9..70e53e8 100644
> > --- a/include/uapi/linux/input.h
> > +++ b/include/uapi/linux/input.h
> > @@ -855,6 +855,7 @@ struct input_keymap_entry {
> >  #define SW_FRONT_PROXIMITY     0x0b  /* set = front proximity sensor active */
> >  #define SW_ROTATE_LOCK         0x0c  /* set = rotate locked/disabled */
> >  #define SW_LINEIN_INSERT       0x0d  /* set = inserted */
> > +#define SW_TOUCH               0x0e  /* set = touch switch turned on (touch events off) */
> >  #define SW_MAX                 0x0f
> >  #define SW_CNT                 (SW_MAX+1)
> >
> > --
> > 1.8.1.2
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
chris@cnpbagwell.com Nov. 12, 2013, 2:50 a.m. UTC | #5
On Fri, Nov 8, 2013 at 1:13 PM, Ping Cheng <pinglinux@gmail.com> wrote:
> On Thu, Nov 7, 2013 at 6:25 PM, Chris Bagwell <chris@cnpbagwell.com> wrote:
>> On Thu, Oct 10, 2013 at 4:17 PM, Ping Cheng <pinglinux@gmail.com> wrote:
>>> This series of models added a hardware switch to turn touch
>>> data on/off. To report the state of the switch, SW_TOUCH
>>> is added in include/uapi/linux/input.h.
>>
>> So I guess the big point is this patch can't go in until a SW_TOUCH
>> goes in first.
>>
>> Since the 1/2 or this 2/2 series has already gone in, would you mind
>> breaking this
>> remaining patch up into the basic support for new Intuos (without the
>> SW_TOUCH) and
>> then a separate patch to add SW_TOUCH support on top of that?  Then
>> the basic support can go in ASAP.
>
> Chris, thank you for pushing the process forward.
>
> SW_TOUCH is truly part of the basic support for the new series. The
> main new feature of this series is touch switch. If we do not report
> its status in the same patch, it means we are not reporting a complete
> set of data.
>
>> I only have comments on this patch related to the SW_TOUCH part... things like:
>>
>>  * should the SW_TOUCH be reported against the wireless interface or
>> the touch interface... userland apps may have an opinion on which is
>> best.
>
> We can not report SW_TOUCH status from touch interface since once
> touch is turned off (by end users), no events can go on touch
> interface. Plus, we do not know when a user may switch touch on.
> That's why SW_TOUCH are regularly updated and reported through
> wireless interface for wireless connection.

I think I made wrong assumption of HW.  Does HW stop sending touch
events when switch is toggled or is switch an indication to ignore
touch events in either driver or userland?

I was thinking it was for later case.  When userland has to ignore, it
is not easy to know switch value on /dev/input/foo really means what
to do related to events on /dev/input/bar.  So thats were my thoughts
were about moving it to input that needs to be disabled.  In former
case, it just status so not so important to decide which input to
report over.

>
>>  * the part with updating SW_TOUCH from unrelated interfaces could use
>
> It is not unrelated interface. It is how it works.
>
>> a review by someone like Dmitry for possible issues.

I meant any issues with parsing data in context of /dev/input/foo but
doing an input_sync(/dev/input/bar) in that same context.  Probably no
issue but I don't know kernel internals to be sure.

>>  * It would be better if you didn't add that EV_SW for HW that will
>> not report the SW_TOUCH.
>
> I can consider that in the next version.
>
>> If you break the patch into 2, you can add my line for the basic
>
> I'd like to know your opinion about my comments before updating the
> patch. IMO, using two patches to process one set of raw data
> complicates the support.

Assuming SW_TOUCH for this device is only for status reporting, I
don't have much opinion.  If it because a request to disable touch
events in userland then I think it should move to device its related
to.

Chris

>
> Ping
>
>> support without SW_TOUCH:
>>
>> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
>>
>> Chris
>>
>>>
>>> The driver is also updated to process wireless devices that do
>>> not support touch interface.
>>>
>>> Tested-by: Jason Gerecke <killertofu@gmail.com>
>>> Signed-off-by: Ping Cheng <pingc@wacom.com>
>>> ---
>>> v2: Change SW_TOUCH_ENABLED to SW_TOUCH and clear BTN_TOUCH bit
>>> for button only interfaces as suggested by Peter Hutterer.
>>> ---
>>>  drivers/input/tablet/wacom_sys.c | 16 +++++++-
>>>  drivers/input/tablet/wacom_wac.c | 87 ++++++++++++++++++++++++++++++++--------
>>>  drivers/input/tablet/wacom_wac.h |  7 ++++
>>>  include/uapi/linux/input.h       |  1 +
>>>  4 files changed, 93 insertions(+), 18 deletions(-)
>>>
>>> diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
>>> index 7bdb5e9..efd9729 100644
>>> --- a/drivers/input/tablet/wacom_sys.c
>>> +++ b/drivers/input/tablet/wacom_sys.c
>>> @@ -1190,12 +1190,15 @@ static void wacom_wireless_work(struct work_struct *work)
>>>                 wacom_wac1->features.device_type = BTN_TOOL_PEN;
>>>                 snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
>>>                          wacom_wac1->features.name);
>>> +               wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
>>> +               wacom_wac1->shared->type = wacom_wac1->features.type;
>>>                 error = wacom_register_input(wacom1);
>>>                 if (error)
>>>                         goto fail;
>>>
>>>                 /* Touch interface */
>>> -               if (wacom_wac1->features.touch_max) {
>>> +               if (wacom_wac1->features.touch_max ||
>>> +                   wacom_wac1->features.type == INTUOS_HT) {
>>>                         wacom_wac2->features =
>>>                                 *((struct wacom_features *)id->driver_info);
>>>                         wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
>>> @@ -1210,6 +1213,10 @@ static void wacom_wireless_work(struct work_struct *work)
>>>                         error = wacom_register_input(wacom2);
>>>                         if (error)
>>>                                 goto fail;
>>> +
>>> +                       if (wacom_wac1->features.type == INTUOS_HT &&
>>> +                           wacom_wac1->features.touch_max)
>>> +                               wacom_wac->shared->touch_input = wacom_wac2->input;
>>>                 }
>>>
>>>                 error = wacom_initialize_battery(wacom);
>>> @@ -1318,7 +1325,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
>>>          * HID descriptor. If this is the touch interface (wMaxPacketSize
>>>          * of WACOM_PKGLEN_BBTOUCH3), override the table values.
>>>          */
>>> -       if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
>>> +       if (features->type >= INTUOS5S && features->type <= INTUOS_HT) {
>>>                 if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
>>>                         features->device_type = BTN_TOOL_FINGER;
>>>                         features->pktlen = WACOM_PKGLEN_BBTOUCH3;
>>> @@ -1390,6 +1397,11 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
>>>                 }
>>>         }
>>>
>>> +       if (wacom_wac->features.type == INTUOS_HT && wacom_wac->features.touch_max) {
>>> +               if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
>>> +                       wacom_wac->shared->touch_input = wacom_wac->input;
>>> +       }
>>> +
>>>         return 0;
>>>
>>>   fail5: wacom_destroy_leds(wacom);
>>> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
>>> index 9c8eded..4cbea85 100644
>>> --- a/drivers/input/tablet/wacom_wac.c
>>> +++ b/drivers/input/tablet/wacom_wac.c
>>> @@ -1176,10 +1176,17 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
>>>  static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
>>>  {
>>>         struct input_dev *input = wacom->input;
>>> +       struct wacom_features *features = &wacom->features;
>>>
>>> -       input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
>>> +       if (features->type == INTUOS_HT) {
>>> +               input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
>>> +               input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
>>> +       } else {
>>> +
>>> +               input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
>>> +               input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
>>> +       }
>>>         input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
>>> -       input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
>>>         input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
>>>  }
>>>
>>> @@ -1213,13 +1220,23 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
>>>
>>>  static int wacom_bpt_pen(struct wacom_wac *wacom)
>>>  {
>>> +       struct wacom_features *features = &wacom->features;
>>>         struct input_dev *input = wacom->input;
>>>         unsigned char *data = wacom->data;
>>>         int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
>>>
>>> -       if (data[0] != 0x02)
>>> +       if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB_MODE)
>>>             return 0;
>>>
>>> +       if (data[0] == WACOM_REPORT_USB_MODE) {
>>> +               if ((features->type == INTUOS_HT) && features->touch_max) {
>>> +                       input_report_switch(wacom->shared->touch_input,
>>> +                                           SW_TOUCH, data[8] & 0x40);
>>> +                       input_sync(wacom->shared->touch_input);
>>> +               }
>>> +               return 0;
>>> +       }
>>> +
>>>         prox = (data[1] & 0x20) == 0x20;
>>>
>>>         /*
>>> @@ -1297,13 +1314,20 @@ static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
>>>         unsigned char *data = wacom->data;
>>>         int connected;
>>>
>>> -       if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
>>> +       if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL_MODE)
>>>                 return 0;
>>>
>>>         connected = data[1] & 0x01;
>>>         if (connected) {
>>>                 int pid, battery;
>>>
>>> +               if ((wacom->shared->type == INTUOS_HT) &&
>>> +                               wacom->shared->touch_max) {
>>> +                       input_report_switch(wacom->shared->touch_input,
>>> +                                       SW_TOUCH, data[5] & 0x40);
>>> +                       input_sync(wacom->shared->touch_input);
>>> +               }
>>> +
>>>                 pid = get_unaligned_be16(&data[6]);
>>>                 battery = data[5] & 0x3f;
>>>                 if (wacom->pid != pid) {
>>> @@ -1391,6 +1415,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
>>>                 break;
>>>
>>>         case BAMBOO_PT:
>>> +       case INTUOS_HT:
>>>                 sync = wacom_bpt_irq(wacom_wac, len);
>>>                 break;
>>>
>>> @@ -1459,7 +1484,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
>>>
>>>         /* these device have multiple inputs */
>>>         if (features->type >= WIRELESS ||
>>> -           (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
>>> +           (features->type >= INTUOS5S && features->type <= INTUOS_HT) ||
>>>             (features->oVid && features->oPid))
>>>                 features->quirks |= WACOM_QUIRK_MULTI_INPUT;
>>>
>>> @@ -1531,7 +1556,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>>>         struct wacom_features *features = &wacom_wac->features;
>>>         int i;
>>>
>>> -       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
>>> +       input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
>>> +                              BIT_MASK(EV_SW);
>>>
>>>         __set_bit(BTN_TOUCH, input_dev->keybit);
>>>         __set_bit(ABS_MISC, input_dev->absbit);
>>> @@ -1771,33 +1797,48 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>>>                 __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>>>                 break;
>>>
>>> +       case INTUOS_HT:
>>> +               if (features->touch_max &&
>>> +                   (features->device_type == BTN_TOOL_FINGER))
>>> +                       __set_bit(SW_TOUCH, input_dev->swbit);
>>> +               /* fall through */
>>> +
>>>         case BAMBOO_PT:
>>>                 __clear_bit(ABS_MISC, input_dev->absbit);
>>>
>>> -               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>>> -
>>>                 if (features->device_type == BTN_TOOL_FINGER) {
>>> -                       unsigned int flags = INPUT_MT_POINTER;
>>>
>>>                         __set_bit(BTN_LEFT, input_dev->keybit);
>>>                         __set_bit(BTN_FORWARD, input_dev->keybit);
>>>                         __set_bit(BTN_BACK, input_dev->keybit);
>>>                         __set_bit(BTN_RIGHT, input_dev->keybit);
>>>
>>> -                       if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
>>> -                               input_set_abs_params(input_dev,
>>> +                       if (features->touch_max) {
>>> +                               /* touch interface */
>>> +                               unsigned int flags = INPUT_MT_POINTER;
>>> +
>>> +                               __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>>> +                               if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
>>> +                                       input_set_abs_params(input_dev,
>>>                                                      ABS_MT_TOUCH_MAJOR,
>>>                                                      0, features->x_max, 0, 0);
>>> -                               input_set_abs_params(input_dev,
>>> +                                       input_set_abs_params(input_dev,
>>>                                                      ABS_MT_TOUCH_MINOR,
>>>                                                      0, features->y_max, 0, 0);
>>> +                               } else {
>>> +                                       __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
>>> +                                       __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
>>> +                                       flags = 0;
>>> +                               }
>>> +                               input_mt_init_slots(input_dev, features->touch_max, flags);
>>>                         } else {
>>> -                               __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
>>> -                               __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
>>> -                               flags = 0;
>>> +                               /* buttons/keys only interface */
>>> +                               __clear_bit(ABS_X, input_dev->absbit);
>>> +                               __clear_bit(ABS_Y, input_dev->absbit);
>>> +                               __clear_bit(BTN_TOUCH, input_dev->keybit);
>>>                         }
>>> -                       input_mt_init_slots(input_dev, features->touch_max, flags);
>>>                 } else if (features->device_type == BTN_TOOL_PEN) {
>>> +                       __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>>>                         __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
>>>                         __set_bit(BTN_TOOL_PEN, input_dev->keybit);
>>>                         __set_bit(BTN_STYLUS, input_dev->keybit);
>>> @@ -2194,6 +2235,17 @@ static const struct wacom_features wacom_features_0x300 =
>>>  static const struct wacom_features wacom_features_0x301 =
>>>         { "Wacom Bamboo One M",    WACOM_PKGLEN_BBPEN,    21648, 13530, 1023,
>>>           31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
>>> +static const struct wacom_features wacom_features_0x302 =
>>> +       { "Wacom Intuos PT S",     WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
>>> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
>>> +         .touch_max = 16 };
>>> +static const struct wacom_features wacom_features_0x303 =
>>> +       { "Wacom Intuos PT M",     WACOM_PKGLEN_BBPEN,    21600, 13500, 1023,
>>> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
>>> +         .touch_max = 16 };
>>> +static const struct wacom_features wacom_features_0x30E =
>>> +       { "Wacom Intuos S",        WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
>>> +         31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
>>>  static const struct wacom_features wacom_features_0x6004 =
>>>         { "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
>>>           0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
>>> @@ -2329,6 +2381,9 @@ const struct usb_device_id wacom_ids[] = {
>>>         { USB_DEVICE_WACOM(0x10D) },
>>>         { USB_DEVICE_WACOM(0x300) },
>>>         { USB_DEVICE_WACOM(0x301) },
>>> +       { USB_DEVICE_WACOM(0x302) },
>>> +       { USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
>>> +       { USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
>>>         { USB_DEVICE_WACOM(0x304) },
>>>         { USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
>>>         { USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
>>> diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
>>> index fd23a37..ba9e335 100644
>>> --- a/drivers/input/tablet/wacom_wac.h
>>> +++ b/drivers/input/tablet/wacom_wac.h
>>> @@ -54,6 +54,8 @@
>>>  #define WACOM_REPORT_TPCST             16
>>>  #define WACOM_REPORT_TPC1FGE           18
>>>  #define WACOM_REPORT_24HDT             1
>>> +#define WACOM_REPORT_WL_MODE           128
>>> +#define WACOM_REPORT_USB_MODE          192
>>>
>>>  /* device quirks */
>>>  #define WACOM_QUIRK_MULTI_INPUT                0x0001
>>> @@ -81,6 +83,7 @@ enum {
>>>         INTUOSPS,
>>>         INTUOSPM,
>>>         INTUOSPL,
>>> +       INTUOS_HT,
>>>         WACOM_21UX2,
>>>         WACOM_22HD,
>>>         DTK,
>>> @@ -129,6 +132,10 @@ struct wacom_features {
>>>  struct wacom_shared {
>>>         bool stylus_in_proximity;
>>>         bool touch_down;
>>> +       /* for wireless device to access USB interfaces */
>>> +       unsigned touch_max;
>>> +       int type;
>>> +       struct input_dev *touch_input;
>>>  };
>>>
>>>  struct wacom_wac {
>>> diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
>>> index d08abf9..70e53e8 100644
>>> --- a/include/uapi/linux/input.h
>>> +++ b/include/uapi/linux/input.h
>>> @@ -855,6 +855,7 @@ struct input_keymap_entry {
>>>  #define SW_FRONT_PROXIMITY     0x0b  /* set = front proximity sensor active */
>>>  #define SW_ROTATE_LOCK         0x0c  /* set = rotate locked/disabled */
>>>  #define SW_LINEIN_INSERT       0x0d  /* set = inserted */
>>> +#define SW_TOUCH               0x0e  /* set = touch switch turned on (touch events off) */
>>>  #define SW_MAX                 0x0f
>>>  #define SW_CNT                 (SW_MAX+1)
>>>
>>> --
>>> 1.8.1.2
>>>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ping Cheng Nov. 12, 2013, 5:29 p.m. UTC | #6
On Monday, November 11, 2013, Chris Bagwell wrote:
>
> On Fri, Nov 8, 2013 at 1:13 PM, Ping Cheng <pinglinux@gmail.com> wrote:
> > On Thu, Nov 7, 2013 at 6:25 PM, Chris Bagwell <chris@cnpbagwell.com> wrote:
> >> On Thu, Oct 10, 2013 at 4:17 PM, Ping Cheng <pinglinux@gmail.com> wrote:
> >>> This series of models added a hardware switch to turn touch
> >>> data on/off. To report the state of the switch, SW_TOUCH
> >>> is added in include/uapi/linux/input.h.
> >>
> >> So I guess the big point is this patch can't go in until a SW_TOUCH
> >> goes in first.
> >>
> >> Since the 1/2 or this 2/2 series has already gone in, would you mind
> >> breaking this
> >> remaining patch up into the basic support for new Intuos (without the
> >> SW_TOUCH) and
> >> then a separate patch to add SW_TOUCH support on top of that?  Then
> >> the basic support can go in ASAP.
> >
> > Chris, thank you for pushing the process forward.
> >
> > SW_TOUCH is truly part of the basic support for the new series. The
> > main new feature of this series is touch switch. If we do not report
> > its status in the same patch, it means we are not reporting a complete
> > set of data.
> >
> >> I only have comments on this patch related to the SW_TOUCH part... things like:
> >>
> >>  * should the SW_TOUCH be reported against the wireless interface or
> >> the touch interface... userland apps may have an opinion on which is
> >> best.
> >
> > We can not report SW_TOUCH status from touch interface since once
> > touch is turned off (by end users), no events can go on touch
> > interface. Plus, we do not know when a user may switch touch on.
> > That's why SW_TOUCH are regularly updated and reported through
> > wireless interface for wireless connection.
>
> I think I made wrong assumption of HW.  Does HW stop sending touch
> events when switch is toggled or is switch an indication to ignore
> touch events in either driver or userland?

Yes, tablet stops sending touch events when user turns touch off by
the hardware. It's a hardware switch, as stated in commit comments,
which is controlled by end users. Drivers can not do much about it
except reporting its status.

> I was thinking it was for later case.  When userland has to ignore, it
> is not easy to know switch value on /dev/input/foo really means what
> to do related to events on /dev/input/bar.  So thats were my thoughts
> were about moving it to input that needs to be disabled.  In former
> case, it just status so not so important to decide which input to
> report over.

It is the former case.

> >>  * the part with updating SW_TOUCH from unrelated interfaces could use
> >
> > It is not unrelated interface. It is how it works.
> >
> >> a review by someone like Dmitry for possible issues.
>
> I meant any issues with parsing data in context of /dev/input/foo but
> doing an input_sync(/dev/input/bar) in that same context.  Probably no
> issue but I don't know kernel internals to be sure.

Anyway, I'll split the patch for you. Thank you for reviewing it.

Ping

> >>  * It would be better if you didn't add that EV_SW for HW that will
> >> not report the SW_TOUCH.
> >
> > I can consider that in the next version.
> >
> >> If you break the patch into 2, you can add my line for the basic
> >
> > I'd like to know your opinion about my comments before updating the
> > patch. IMO, using two patches to process one set of raw data
> > complicates the support.
>
> Assuming SW_TOUCH for this device is only for status reporting, I
> don't have much opinion.  If it because a request to disable touch
> events in userland then I think it should move to device its related
> to.
>
> Chris
>
> >
> > Ping
> >
> >> support without SW_TOUCH:
> >>
> >> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
> >>
> >> Chris
> >>
> >>>
> >>> The driver is also updated to process wireless devices that do
> >>> not support touch interface.
> >>>
> >>> Tested-by: Jason Gerecke <killertofu@gmail.com>
> >>> Signed-off-by: Ping Cheng <pingc@wacom.com>
> >>> ---
> >>> v2: Change SW_TOUCH_ENABLED to SW_TOUCH and clear BTN_TOUCH bit
> >>> for button only interfaces as suggested by Peter Hutterer.
> >>> ---
> >>>  drivers/input/tablet/wacom_sys.c | 16 +++++++-
> >>>  drivers/input/tablet/wacom_wac.c | 87 ++++++++++++++++++++++++++++++++--------
> >>>  drivers/input/tablet/wacom_wac.h |  7 ++++
> >>>  include/uapi/linux/input.h       |  1 +
> >>>  4 files changed, 93 insertions(+), 18 deletions(-)
> >>>
> >>> diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
> >>> index 7bdb5e9..efd9729 100644
> >>> --- a/drivers/input/tablet/wacom_sys.c
> >>> +++ b/drivers/input/tablet/wacom_sys.c
> >>> @@ -1190,12 +1190,15 @@ static void wacom_wireless_work(struct work_struct *work)
> >>>                 wacom_wac1->features.device_type = BTN_TOOL_PEN;
> >>>                 snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
> >>>                          wacom_wac1->features.name);
> >>> +               wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
> >>> +               wacom_wac1->shared->type = wacom_wac1->features.type;
> >>>                 error = wacom_register_input(wacom1);
> >>>                 if (error)
> >>>                         goto fail;
> >>>
> >>>                 /* Touch interface */
> >>> -               if (wacom_wac1->features.touch_max) {
> >>> +               if (wacom_wac1->features.touch_max ||
> >>> +                   wacom_wac1->features.type == INTUOS_HT) {
> >>>                         wacom_wac2->features =
> >>>                                 *((struct wacom_features *)id->driver_info);
> >>>                         wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
> >>> @@ -1210,6 +1213,10 @@ static void wacom_wireless_work(struct work_struct *work)
> >>>                         error = wacom_register_input(wacom2);
> >>>                         if (error)
> >>>                                 goto fail;
> >>> +
> >>> +                       if (wacom_wac1->features.type == INTUOS_HT &&
> >>> +                           wacom_wac1->features.touch_max)
> >>> +                               wacom_wac->shared->touch_input = wacom_wac2->input;
> >>>                 }
> >>>
> >>>                 error = wacom_initialize_battery(wacom);
> >>> @@ -1318,7 +1325,7 @@ static int wac
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 7bdb5e9..efd9729 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1190,12 +1190,15 @@  static void wacom_wireless_work(struct work_struct *work)
 		wacom_wac1->features.device_type = BTN_TOOL_PEN;
 		snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
 			 wacom_wac1->features.name);
+		wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
+		wacom_wac1->shared->type = wacom_wac1->features.type;
 		error = wacom_register_input(wacom1);
 		if (error)
 			goto fail;
 
 		/* Touch interface */
-		if (wacom_wac1->features.touch_max) {
+		if (wacom_wac1->features.touch_max ||
+		    wacom_wac1->features.type == INTUOS_HT) {
 			wacom_wac2->features =
 				*((struct wacom_features *)id->driver_info);
 			wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
@@ -1210,6 +1213,10 @@  static void wacom_wireless_work(struct work_struct *work)
 			error = wacom_register_input(wacom2);
 			if (error)
 				goto fail;
+
+			if (wacom_wac1->features.type == INTUOS_HT &&
+			    wacom_wac1->features.touch_max)
+				wacom_wac->shared->touch_input = wacom_wac2->input;
 		}
 
 		error = wacom_initialize_battery(wacom);
@@ -1318,7 +1325,7 @@  static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	 * HID descriptor. If this is the touch interface (wMaxPacketSize
 	 * of WACOM_PKGLEN_BBTOUCH3), override the table values.
 	 */
-	if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
+	if (features->type >= INTUOS5S && features->type <= INTUOS_HT) {
 		if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
 			features->device_type = BTN_TOOL_FINGER;
 			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
@@ -1390,6 +1397,11 @@  static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 		}
 	}
 
+	if (wacom_wac->features.type == INTUOS_HT && wacom_wac->features.touch_max) {
+		if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
+			wacom_wac->shared->touch_input = wacom_wac->input;
+	}
+
 	return 0;
 
  fail5: wacom_destroy_leds(wacom);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 9c8eded..4cbea85 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1176,10 +1176,17 @@  static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
 static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
 {
 	struct input_dev *input = wacom->input;
+	struct wacom_features *features = &wacom->features;
 
-	input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
+	if (features->type == INTUOS_HT) {
+		input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
+		input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
+	} else {
+
+		input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
+		input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
+	}
 	input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
-	input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
 	input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
 }
 
@@ -1213,13 +1220,23 @@  static int wacom_bpt3_touch(struct wacom_wac *wacom)
 
 static int wacom_bpt_pen(struct wacom_wac *wacom)
 {
+	struct wacom_features *features = &wacom->features;
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
 	int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
 
-	if (data[0] != 0x02)
+	if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB_MODE)
 	    return 0;
 
+	if (data[0] == WACOM_REPORT_USB_MODE) {
+		if ((features->type == INTUOS_HT) && features->touch_max) {
+			input_report_switch(wacom->shared->touch_input,
+					    SW_TOUCH, data[8] & 0x40);
+			input_sync(wacom->shared->touch_input);
+		}
+		return 0;
+	}
+
 	prox = (data[1] & 0x20) == 0x20;
 
 	/*
@@ -1297,13 +1314,20 @@  static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
 	unsigned char *data = wacom->data;
 	int connected;
 
-	if (len != WACOM_PKGLEN_WIRELESS || data[0] != 0x80)
+	if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL_MODE)
 		return 0;
 
 	connected = data[1] & 0x01;
 	if (connected) {
 		int pid, battery;
 
+		if ((wacom->shared->type == INTUOS_HT) &&
+				wacom->shared->touch_max) {
+			input_report_switch(wacom->shared->touch_input,
+					SW_TOUCH, data[5] & 0x40);
+			input_sync(wacom->shared->touch_input);
+		}
+
 		pid = get_unaligned_be16(&data[6]);
 		battery = data[5] & 0x3f;
 		if (wacom->pid != pid) {
@@ -1391,6 +1415,7 @@  void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		break;
 
 	case BAMBOO_PT:
+	case INTUOS_HT:
 		sync = wacom_bpt_irq(wacom_wac, len);
 		break;
 
@@ -1459,7 +1484,7 @@  void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* these device have multiple inputs */
 	if (features->type >= WIRELESS ||
-	    (features->type >= INTUOS5S && features->type <= INTUOSPL) ||
+	    (features->type >= INTUOS5S && features->type <= INTUOS_HT) ||
 	    (features->oVid && features->oPid))
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
@@ -1531,7 +1556,8 @@  int wacom_setup_input_capabilities(struct input_dev *input_dev,
 	struct wacom_features *features = &wacom_wac->features;
 	int i;
 
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
+			       BIT_MASK(EV_SW);
 
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(ABS_MISC, input_dev->absbit);
@@ -1771,33 +1797,48 @@  int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 		break;
 
+	case INTUOS_HT:
+		if (features->touch_max &&
+		    (features->device_type == BTN_TOOL_FINGER))
+			__set_bit(SW_TOUCH, input_dev->swbit);
+		/* fall through */
+
 	case BAMBOO_PT:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-
 		if (features->device_type == BTN_TOOL_FINGER) {
-			unsigned int flags = INPUT_MT_POINTER;
 
 			__set_bit(BTN_LEFT, input_dev->keybit);
 			__set_bit(BTN_FORWARD, input_dev->keybit);
 			__set_bit(BTN_BACK, input_dev->keybit);
 			__set_bit(BTN_RIGHT, input_dev->keybit);
 
-			if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
-				input_set_abs_params(input_dev,
+			if (features->touch_max) {
+				/* touch interface */
+				unsigned int flags = INPUT_MT_POINTER;
+
+				__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+				if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
+					input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MAJOR,
 						     0, features->x_max, 0, 0);
-				input_set_abs_params(input_dev,
+					input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MINOR,
 						     0, features->y_max, 0, 0);
+				} else {
+					__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+					__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+					flags = 0;
+				}
+				input_mt_init_slots(input_dev, features->touch_max, flags);
 			} else {
-				__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-				__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-				flags = 0;
+				/* buttons/keys only interface */
+				__clear_bit(ABS_X, input_dev->absbit);
+				__clear_bit(ABS_Y, input_dev->absbit);
+				__clear_bit(BTN_TOUCH, input_dev->keybit);
 			}
-			input_mt_init_slots(input_dev, features->touch_max, flags);
 		} else if (features->device_type == BTN_TOOL_PEN) {
+			__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
 			__set_bit(BTN_STYLUS, input_dev->keybit);
@@ -2194,6 +2235,17 @@  static const struct wacom_features wacom_features_0x300 =
 static const struct wacom_features wacom_features_0x301 =
 	{ "Wacom Bamboo One M",    WACOM_PKGLEN_BBPEN,    21648, 13530, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x302 =
+	{ "Wacom Intuos PT S",     WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
+	  31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
+static const struct wacom_features wacom_features_0x303 =
+	{ "Wacom Intuos PT M",     WACOM_PKGLEN_BBPEN,    21600, 13500, 1023,
+	  31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
+static const struct wacom_features wacom_features_0x30E =
+	{ "Wacom Intuos S",        WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
+	  31, INTUOS_HT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x6004 =
 	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2329,6 +2381,9 @@  const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x10D) },
 	{ USB_DEVICE_WACOM(0x300) },
 	{ USB_DEVICE_WACOM(0x301) },
+	{ USB_DEVICE_WACOM(0x302) },
+	{ USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
+	{ USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_WACOM(0x304) },
 	{ USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
 	{ USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index fd23a37..ba9e335 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -54,6 +54,8 @@ 
 #define WACOM_REPORT_TPCST		16
 #define WACOM_REPORT_TPC1FGE		18
 #define WACOM_REPORT_24HDT		1
+#define WACOM_REPORT_WL_MODE		128
+#define WACOM_REPORT_USB_MODE		192
 
 /* device quirks */
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
@@ -81,6 +83,7 @@  enum {
 	INTUOSPS,
 	INTUOSPM,
 	INTUOSPL,
+	INTUOS_HT,
 	WACOM_21UX2,
 	WACOM_22HD,
 	DTK,
@@ -129,6 +132,10 @@  struct wacom_features {
 struct wacom_shared {
 	bool stylus_in_proximity;
 	bool touch_down;
+	/* for wireless device to access USB interfaces */
+	unsigned touch_max;
+	int type;
+	struct input_dev *touch_input;
 };
 
 struct wacom_wac {
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index d08abf9..70e53e8 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -855,6 +855,7 @@  struct input_keymap_entry {
 #define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
 #define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
 #define SW_LINEIN_INSERT	0x0d  /* set = inserted */
+#define SW_TOUCH		0x0e  /* set = touch switch turned on (touch events off) */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)