| Message ID | 1384306274-27315-3-git-send-email-haojian.zhuang@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Quoting Haojian Zhuang (2013-11-12 17:31:14) > Enable clock binding for Hi3620 common clock driver. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> > --- > arch/arm/boot/dts/hi3620.dtsi | 79 ++++++++++++++++++++++++------------------- > arch/arm/boot/dts/hi4511.dts | 3 +- > 2 files changed, 46 insertions(+), 36 deletions(-) > > diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi > index e311937..ab1116d 100644 > --- a/arch/arm/boot/dts/hi3620.dtsi > +++ b/arch/arm/boot/dts/hi3620.dtsi > @@ -11,7 +11,8 @@ > * publishhed by the Free Software Foundation. > */ > > -/include/ "skeleton.dtsi" > +#include "skeleton.dtsi" > +#include <dt-bindings/clock/hi3620-clock.h> > > / { > aliases { > @@ -63,6 +64,7 @@ > }; > > amba { > + > #address-cells = <1>; > #size-cells = <1>; > compatible = "arm,amba-bus"; > @@ -88,13 +90,20 @@ > > sysctrl: system-controller@802000 { > compatible = "hisilicon,sysctrl"; > - reg = <0x802000 0x1000>; > #address-cells = <1>; > - #size-cells = <0>; > + #size-cells = <1>; > + ranges = <0 0x802000 0x1000>; > + reg = <0x802000 0x1000>; > > smp-offset = <0x31c>; > resume-offset = <0x308>; > reboot-offset = <0x4>; > + > + clock: clock@0 { > + compatible = "hisilicon,hi3620-clock"; > + reg = <0 0x10000>; > + #clock-cells = <1>; > + }; > }; > > dual_timer0: dual_timer@800000 { > @@ -102,7 +111,7 @@ > reg = <0x800000 0x1000>; > /* timer00 & timer01 */ > interrupts = <0 0 4>, <0 1 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; > clock-names = "apb_pclk"; Two clocks are specified in "clocks" but only a single name in clock-names. Is this intentional? Thanks, Mike > status = "disabled"; > }; > @@ -112,7 +121,7 @@ > reg = <0x801000 0x1000>; > /* timer10 & timer11 */ > interrupts = <0 2 4>, <0 3 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -122,7 +131,7 @@ > reg = <0xa01000 0x1000>; > /* timer20 & timer21 */ > interrupts = <0 4 4>, <0 5 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -132,7 +141,7 @@ > reg = <0xa02000 0x1000>; > /* timer30 & timer31 */ > interrupts = <0 6 4>, <0 7 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -142,7 +151,7 @@ > reg = <0xa03000 0x1000>; > /* timer40 & timer41 */ > interrupts = <0 96 4>, <0 97 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -157,7 +166,7 @@ > compatible = "arm,pl011", "arm,primecell"; > reg = <0xb00000 0x1000>; > interrupts = <0 20 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_UARTCLK0>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -166,7 +175,7 @@ > compatible = "arm,pl011", "arm,primecell"; > reg = <0xb01000 0x1000>; > interrupts = <0 21 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_UARTCLK1>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -175,7 +184,7 @@ > compatible = "arm,pl011", "arm,primecell"; > reg = <0xb02000 0x1000>; > interrupts = <0 22 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_UARTCLK2>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -184,7 +193,7 @@ > compatible = "arm,pl011", "arm,primecell"; > reg = <0xb03000 0x1000>; > interrupts = <0 23 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_UARTCLK3>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -193,7 +202,7 @@ > compatible = "arm,pl011", "arm,primecell"; > reg = <0xb04000 0x1000>; > interrupts = <0 24 4>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_UARTCLK4>; > clock-names = "apb_pclk"; > status = "disabled"; > }; > @@ -208,7 +217,7 @@ > &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK0>; > clock-names = "apb_pclk"; > }; > > @@ -223,7 +232,7 @@ > &pmx0 6 5 1 &pmx0 7 6 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK1>; > clock-names = "apb_pclk"; > }; > > @@ -238,7 +247,7 @@ > &pmx0 6 3 1 &pmx0 7 3 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK2>; > clock-names = "apb_pclk"; > }; > > @@ -253,7 +262,7 @@ > &pmx0 6 11 1 &pmx0 7 11 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK3>; > clock-names = "apb_pclk"; > }; > > @@ -268,7 +277,7 @@ > &pmx0 6 13 1 &pmx0 7 13 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK4>; > clock-names = "apb_pclk"; > }; > > @@ -283,7 +292,7 @@ > &pmx0 6 16 1 &pmx0 7 16 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK5>; > clock-names = "apb_pclk"; > }; > > @@ -298,7 +307,7 @@ > &pmx0 6 18 1 &pmx0 7 19 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK6>; > clock-names = "apb_pclk"; > }; > > @@ -313,7 +322,7 @@ > &pmx0 6 25 1 &pmx0 7 26 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK7>; > clock-names = "apb_pclk"; > }; > > @@ -328,7 +337,7 @@ > &pmx0 6 33 1 &pmx0 7 34 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK8>; > clock-names = "apb_pclk"; > }; > > @@ -343,7 +352,7 @@ > &pmx0 6 41 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK9>; > clock-names = "apb_pclk"; > }; > > @@ -357,7 +366,7 @@ > &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK10>; > clock-names = "apb_pclk"; > }; > > @@ -372,7 +381,7 @@ > &pmx0 6 49 1 &pmx0 7 49 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK11>; > clock-names = "apb_pclk"; > }; > > @@ -387,7 +396,7 @@ > &pmx0 6 51 1 &pmx0 7 52 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK12>; > clock-names = "apb_pclk"; > }; > > @@ -402,7 +411,7 @@ > &pmx0 6 55 1 &pmx0 7 56 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK13>; > clock-names = "apb_pclk"; > }; > > @@ -417,7 +426,7 @@ > &pmx0 6 60 1 &pmx0 7 61 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK14>; > clock-names = "apb_pclk"; > }; > > @@ -432,7 +441,7 @@ > &pmx0 6 64 1 &pmx0 7 65 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK15>; > clock-names = "apb_pclk"; > }; > > @@ -447,7 +456,7 @@ > &pmx0 6 72 1 &pmx0 7 73 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK16>; > clock-names = "apb_pclk"; > }; > > @@ -462,7 +471,7 @@ > &pmx0 6 80 1 &pmx0 7 81 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK17>; > clock-names = "apb_pclk"; > }; > > @@ -477,7 +486,7 @@ > &pmx0 6 86 1 &pmx0 7 87 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK18>; > clock-names = "apb_pclk"; > }; > > @@ -491,7 +500,7 @@ > &pmx0 3 88 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK19>; > clock-names = "apb_pclk"; > }; > > @@ -505,7 +514,7 @@ > &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK20>; > clock-names = "apb_pclk"; > }; > > @@ -518,7 +527,7 @@ > gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; > interrupt-controller; > #interrupt-cells = <2>; > - clocks = <&pclk>; > + clocks = <&clock HI3620_GPIOCLK21>; > clock-names = "apb_pclk"; > }; > > diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts > index 96e69ab..fe62392 100644 > --- a/arch/arm/boot/dts/hi4511.dts > +++ b/arch/arm/boot/dts/hi4511.dts > @@ -8,7 +8,8 @@ > */ > > /dts-v1/; > -/include/ "hi3620.dtsi" > + > +#include "hi3620.dtsi" > > / { > model = "Hisilicon Hi4511 Development Board"; > -- > 1.8.3.2
On Sun, Nov 17, 2013 at 10:44 AM, Mike Turquette <mturquette@linaro.org> wrote: > Quoting Haojian Zhuang (2013-11-12 17:31:14) >> Enable clock binding for Hi3620 common clock driver. >> >> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> >> --- >> arch/arm/boot/dts/hi3620.dtsi | 79 ++++++++++++++++++++++++------------------- >> arch/arm/boot/dts/hi4511.dts | 3 +- >> 2 files changed, 46 insertions(+), 36 deletions(-) >> >> diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi >> index e311937..ab1116d 100644 >> --- a/arch/arm/boot/dts/hi3620.dtsi >> +++ b/arch/arm/boot/dts/hi3620.dtsi >> @@ -11,7 +11,8 @@ >> * publishhed by the Free Software Foundation. >> */ >> >> -/include/ "skeleton.dtsi" >> +#include "skeleton.dtsi" >> +#include <dt-bindings/clock/hi3620-clock.h> >> >> / { >> aliases { >> @@ -63,6 +64,7 @@ >> }; >> >> amba { >> + >> #address-cells = <1>; >> #size-cells = <1>; >> compatible = "arm,amba-bus"; >> @@ -88,13 +90,20 @@ >> >> sysctrl: system-controller@802000 { >> compatible = "hisilicon,sysctrl"; >> - reg = <0x802000 0x1000>; >> #address-cells = <1>; >> - #size-cells = <0>; >> + #size-cells = <1>; >> + ranges = <0 0x802000 0x1000>; >> + reg = <0x802000 0x1000>; >> >> smp-offset = <0x31c>; >> resume-offset = <0x308>; >> reboot-offset = <0x4>; >> + >> + clock: clock@0 { >> + compatible = "hisilicon,hi3620-clock"; >> + reg = <0 0x10000>; >> + #clock-cells = <1>; >> + }; >> }; >> >> dual_timer0: dual_timer@800000 { >> @@ -102,7 +111,7 @@ >> reg = <0x800000 0x1000>; >> /* timer00 & timer01 */ >> interrupts = <0 0 4>, <0 1 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; >> clock-names = "apb_pclk"; > > Two clocks are specified in "clocks" but only a single name in > clock-names. Is this intentional? > Yes, it's intentional. The amba driver needs this. > Thanks, > Mike > >> status = "disabled"; >> }; >> @@ -112,7 +121,7 @@ >> reg = <0x801000 0x1000>; >> /* timer10 & timer11 */ >> interrupts = <0 2 4>, <0 3 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -122,7 +131,7 @@ >> reg = <0xa01000 0x1000>; >> /* timer20 & timer21 */ >> interrupts = <0 4 4>, <0 5 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -132,7 +141,7 @@ >> reg = <0xa02000 0x1000>; >> /* timer30 & timer31 */ >> interrupts = <0 6 4>, <0 7 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -142,7 +151,7 @@ >> reg = <0xa03000 0x1000>; >> /* timer40 & timer41 */ >> interrupts = <0 96 4>, <0 97 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -157,7 +166,7 @@ >> compatible = "arm,pl011", "arm,primecell"; >> reg = <0xb00000 0x1000>; >> interrupts = <0 20 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_UARTCLK0>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -166,7 +175,7 @@ >> compatible = "arm,pl011", "arm,primecell"; >> reg = <0xb01000 0x1000>; >> interrupts = <0 21 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_UARTCLK1>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -175,7 +184,7 @@ >> compatible = "arm,pl011", "arm,primecell"; >> reg = <0xb02000 0x1000>; >> interrupts = <0 22 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_UARTCLK2>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -184,7 +193,7 @@ >> compatible = "arm,pl011", "arm,primecell"; >> reg = <0xb03000 0x1000>; >> interrupts = <0 23 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_UARTCLK3>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -193,7 +202,7 @@ >> compatible = "arm,pl011", "arm,primecell"; >> reg = <0xb04000 0x1000>; >> interrupts = <0 24 4>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_UARTCLK4>; >> clock-names = "apb_pclk"; >> status = "disabled"; >> }; >> @@ -208,7 +217,7 @@ >> &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK0>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -223,7 +232,7 @@ >> &pmx0 6 5 1 &pmx0 7 6 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK1>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -238,7 +247,7 @@ >> &pmx0 6 3 1 &pmx0 7 3 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK2>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -253,7 +262,7 @@ >> &pmx0 6 11 1 &pmx0 7 11 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK3>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -268,7 +277,7 @@ >> &pmx0 6 13 1 &pmx0 7 13 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK4>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -283,7 +292,7 @@ >> &pmx0 6 16 1 &pmx0 7 16 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK5>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -298,7 +307,7 @@ >> &pmx0 6 18 1 &pmx0 7 19 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK6>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -313,7 +322,7 @@ >> &pmx0 6 25 1 &pmx0 7 26 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK7>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -328,7 +337,7 @@ >> &pmx0 6 33 1 &pmx0 7 34 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK8>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -343,7 +352,7 @@ >> &pmx0 6 41 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK9>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -357,7 +366,7 @@ >> &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK10>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -372,7 +381,7 @@ >> &pmx0 6 49 1 &pmx0 7 49 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK11>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -387,7 +396,7 @@ >> &pmx0 6 51 1 &pmx0 7 52 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK12>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -402,7 +411,7 @@ >> &pmx0 6 55 1 &pmx0 7 56 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK13>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -417,7 +426,7 @@ >> &pmx0 6 60 1 &pmx0 7 61 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK14>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -432,7 +441,7 @@ >> &pmx0 6 64 1 &pmx0 7 65 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK15>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -447,7 +456,7 @@ >> &pmx0 6 72 1 &pmx0 7 73 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK16>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -462,7 +471,7 @@ >> &pmx0 6 80 1 &pmx0 7 81 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK17>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -477,7 +486,7 @@ >> &pmx0 6 86 1 &pmx0 7 87 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK18>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -491,7 +500,7 @@ >> &pmx0 3 88 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK19>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -505,7 +514,7 @@ >> &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK20>; >> clock-names = "apb_pclk"; >> }; >> >> @@ -518,7 +527,7 @@ >> gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; >> interrupt-controller; >> #interrupt-cells = <2>; >> - clocks = <&pclk>; >> + clocks = <&clock HI3620_GPIOCLK21>; >> clock-names = "apb_pclk"; >> }; >> >> diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts >> index 96e69ab..fe62392 100644 >> --- a/arch/arm/boot/dts/hi4511.dts >> +++ b/arch/arm/boot/dts/hi4511.dts >> @@ -8,7 +8,8 @@ >> */ >> >> /dts-v1/; >> -/include/ "hi3620.dtsi" >> + >> +#include "hi3620.dtsi" >> >> / { >> model = "Hisilicon Hi4511 Development Board"; >> -- >> 1.8.3.2
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index e311937..ab1116d 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -11,7 +11,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/clock/hi3620-clock.h> / { aliases { @@ -63,6 +64,7 @@ }; amba { + #address-cells = <1>; #size-cells = <1>; compatible = "arm,amba-bus"; @@ -88,13 +90,20 @@ sysctrl: system-controller@802000 { compatible = "hisilicon,sysctrl"; - reg = <0x802000 0x1000>; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x802000 0x1000>; + reg = <0x802000 0x1000>; smp-offset = <0x31c>; resume-offset = <0x308>; reboot-offset = <0x4>; + + clock: clock@0 { + compatible = "hisilicon,hi3620-clock"; + reg = <0 0x10000>; + #clock-cells = <1>; + }; }; dual_timer0: dual_timer@800000 { @@ -102,7 +111,7 @@ reg = <0x800000 0x1000>; /* timer00 & timer01 */ interrupts = <0 0 4>, <0 1 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -112,7 +121,7 @@ reg = <0x801000 0x1000>; /* timer10 & timer11 */ interrupts = <0 2 4>, <0 3 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -122,7 +131,7 @@ reg = <0xa01000 0x1000>; /* timer20 & timer21 */ interrupts = <0 4 4>, <0 5 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -132,7 +141,7 @@ reg = <0xa02000 0x1000>; /* timer30 & timer31 */ interrupts = <0 6 4>, <0 7 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -142,7 +151,7 @@ reg = <0xa03000 0x1000>; /* timer40 & timer41 */ interrupts = <0 96 4>, <0 97 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -157,7 +166,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb00000 0x1000>; interrupts = <0 20 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK0>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -166,7 +175,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb01000 0x1000>; interrupts = <0 21 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK1>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -175,7 +184,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb02000 0x1000>; interrupts = <0 22 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK2>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -184,7 +193,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb03000 0x1000>; interrupts = <0 23 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK3>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -193,7 +202,7 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xb04000 0x1000>; interrupts = <0 24 4>; - clocks = <&pclk>; + clocks = <&clock HI3620_UARTCLK4>; clock-names = "apb_pclk"; status = "disabled"; }; @@ -208,7 +217,7 @@ &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK0>; clock-names = "apb_pclk"; }; @@ -223,7 +232,7 @@ &pmx0 6 5 1 &pmx0 7 6 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK1>; clock-names = "apb_pclk"; }; @@ -238,7 +247,7 @@ &pmx0 6 3 1 &pmx0 7 3 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK2>; clock-names = "apb_pclk"; }; @@ -253,7 +262,7 @@ &pmx0 6 11 1 &pmx0 7 11 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK3>; clock-names = "apb_pclk"; }; @@ -268,7 +277,7 @@ &pmx0 6 13 1 &pmx0 7 13 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK4>; clock-names = "apb_pclk"; }; @@ -283,7 +292,7 @@ &pmx0 6 16 1 &pmx0 7 16 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK5>; clock-names = "apb_pclk"; }; @@ -298,7 +307,7 @@ &pmx0 6 18 1 &pmx0 7 19 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK6>; clock-names = "apb_pclk"; }; @@ -313,7 +322,7 @@ &pmx0 6 25 1 &pmx0 7 26 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK7>; clock-names = "apb_pclk"; }; @@ -328,7 +337,7 @@ &pmx0 6 33 1 &pmx0 7 34 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK8>; clock-names = "apb_pclk"; }; @@ -343,7 +352,7 @@ &pmx0 6 41 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK9>; clock-names = "apb_pclk"; }; @@ -357,7 +366,7 @@ &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK10>; clock-names = "apb_pclk"; }; @@ -372,7 +381,7 @@ &pmx0 6 49 1 &pmx0 7 49 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK11>; clock-names = "apb_pclk"; }; @@ -387,7 +396,7 @@ &pmx0 6 51 1 &pmx0 7 52 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK12>; clock-names = "apb_pclk"; }; @@ -402,7 +411,7 @@ &pmx0 6 55 1 &pmx0 7 56 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK13>; clock-names = "apb_pclk"; }; @@ -417,7 +426,7 @@ &pmx0 6 60 1 &pmx0 7 61 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK14>; clock-names = "apb_pclk"; }; @@ -432,7 +441,7 @@ &pmx0 6 64 1 &pmx0 7 65 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK15>; clock-names = "apb_pclk"; }; @@ -447,7 +456,7 @@ &pmx0 6 72 1 &pmx0 7 73 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK16>; clock-names = "apb_pclk"; }; @@ -462,7 +471,7 @@ &pmx0 6 80 1 &pmx0 7 81 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK17>; clock-names = "apb_pclk"; }; @@ -477,7 +486,7 @@ &pmx0 6 86 1 &pmx0 7 87 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK18>; clock-names = "apb_pclk"; }; @@ -491,7 +500,7 @@ &pmx0 3 88 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK19>; clock-names = "apb_pclk"; }; @@ -505,7 +514,7 @@ &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK20>; clock-names = "apb_pclk"; }; @@ -518,7 +527,7 @@ gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&pclk>; + clocks = <&clock HI3620_GPIOCLK21>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts index 96e69ab..fe62392 100644 --- a/arch/arm/boot/dts/hi4511.dts +++ b/arch/arm/boot/dts/hi4511.dts @@ -8,7 +8,8 @@ */ /dts-v1/; -/include/ "hi3620.dtsi" + +#include "hi3620.dtsi" / { model = "Hisilicon Hi4511 Development Board";
Enable clock binding for Hi3620 common clock driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> --- arch/arm/boot/dts/hi3620.dtsi | 79 ++++++++++++++++++++++++------------------- arch/arm/boot/dts/hi4511.dts | 3 +- 2 files changed, 46 insertions(+), 36 deletions(-)