diff mbox

[3/3] ARM: keystone: defconfig: enable USB host mode support

Message ID 1385410581-12148-4-git-send-email-w-kwok2@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

WingMan Kwok Nov. 25, 2013, 8:16 p.m. UTC 
Enable the USB host mode support on TI's Keystone platform.
It also enables the support of usb mass storage, FAT and Ext4
filesystems to test rootfs mount over an USB disk.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
---
 arch/arm/configs/keystone_defconfig |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

Comments

Felipe Balbi Nov. 25, 2013, 8:43 p.m. UTC | #1 
Hi,

On Mon, Nov 25, 2013 at 03:16:21PM -0500, WingMan Kwok wrote:
> Enable the USB host mode support on TI's Keystone platform.
> It also enables the support of usb mass storage, FAT and Ext4
> filesystems to test rootfs mount over an USB disk.
> 
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: WingMan Kwok <w-kwok2@ti.com>

no phy driver anywhere ? How will nop-xceiv ever probe if you don't
enable the driver for it ?
diff mbox

Patch

diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 9943e5d..686f612 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -115,6 +115,8 @@  CONFIG_MTD_UBI=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -129,10 +131,24 @@  CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_DEBUG=y
+CONFIG_USB_DWC3_VERBOSE=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_DMADEVICES=y
 CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_MEMORY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
@@ -144,6 +160,8 @@  CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DEBUG_INFO=y