diff mbox

[RFC,4/4] ASoC: RX-51: Add DT support to sound driver

Message ID 1382909086-10493-5-git-send-email-sre@debian.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sebastian Reichel Oct. 27, 2013, 9:24 p.m. UTC
This patch adds device tree support to the Nokia N900 audio driver.
It also removes GPIO defines and gets them from platform data /
device tree, since some GPIO numbers may be different with DT boot.

The binding also changes a helper function in omap-mcbsp, which
is currently only used by the Nokia N900. This change is needed,
because DT instanced omap-mcbsp driver has no valid id assigned.

Last but not least the DT binding is documented.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 .../devicetree/bindings/sound/nokia,rx51.txt       |  28 ++++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 include/sound/rx51.h                               |  18 +++
 sound/soc/omap/omap-mcbsp.c                        |   5 +-
 sound/soc/omap/omap-mcbsp.h                        |   2 +-
 sound/soc/omap/rx51.c                              | 175 ++++++++++++++++-----
 6 files changed, 184 insertions(+), 45 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/nokia,rx51.txt
 create mode 100644 include/sound/rx51.h

Comments

Kumar Gala Oct. 28, 2013, 6:45 a.m. UTC | #1
On Oct 27, 2013, at 4:24 PM, Sebastian Reichel wrote:

> This patch adds device tree support to the Nokia N900 audio driver.
> It also removes GPIO defines and gets them from platform data /
> device tree, since some GPIO numbers may be different with DT boot.
> 
> The binding also changes a helper function in omap-mcbsp, which
> is currently only used by the Nokia N900. This change is needed,
> because DT instanced omap-mcbsp driver has no valid id assigned.
> 
> Last but not least the DT binding is documented.
> 
> Signed-off-by: Sebastian Reichel <sre@debian.org>
> ---
> .../devicetree/bindings/sound/nokia,rx51.txt       |  28 ++++
> .../devicetree/bindings/vendor-prefixes.txt        |   1 +
> include/sound/rx51.h                               |  18 +++
> sound/soc/omap/omap-mcbsp.c                        |   5 +-
> sound/soc/omap/omap-mcbsp.h                        |   2 +-
> sound/soc/omap/rx51.c                              | 175 ++++++++++++++++-----
> 6 files changed, 184 insertions(+), 45 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/nokia,rx51.txt
> create mode 100644 include/sound/rx51.h
> 
> diff --git a/Documentation/devicetree/bindings/sound/nokia,rx51.txt b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
> new file mode 100644
> index 0000000..4f985ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
> @@ -0,0 +1,28 @@
> +* Nokia N900 audio setup

This needs more description 

> +
> +Required properties:
> +- compatible: "nokia,rx51-audio"
> +- ti,mcbsp: phandle for the McBSP node
> +- ti,codec: phandle for the main TLV320AIC3X node
> +- ti,codec_aux: phandle for the main TLV320AIC3X auxiliary node
> +- ti,headset_amp: phandle for the TPA6130A2 node

Hmm, I don't think these should be ti prefixed but nokia.

> +- tvout-selection-gpio: GPIO for tvout selection
> +- jack-detection-gpio: GPIO for jack detection
> +- eci-sw-gpio: GPIO for ECI SW
> +- speaker-amp-gpio: GPIO for Speaker Amp

why aren't the gpio properties vendor prefixed?

> +
> +Example:
> +
> +sound {
> +	compatible = "nokia,rx51-audio";
> +
> +	ti,mcbsp = <&mcbsp2>;
> +	ti,codec = <&tlv320aic3x>;
> +	ti,codec_aux = <&tlv320aic3x_aux>;
> +	ti,headset_amp = <&tpa6130a2>;
> +
> +	tvout-selection-gpio = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
> +	jack-detection-gpio = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
> +	eci-sw-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
> +	speaker-amp-gpio = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
> +};
Linus Walleij Oct. 31, 2013, 2:44 p.m. UTC | #2
On Sun, Oct 27, 2013 at 2:24 PM, Sebastian Reichel <sre@debian.org> wrote:

> +- eci-sw-gpio: GPIO for ECI SW
> +- speaker-amp-gpio: GPIO for Speaker Amp

Can you please spell out the acronyms? ECI? SW? Amp?

I guess SW=switch, Amp=amplifier, but ECI beats me.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Mark Brown Oct. 31, 2013, 3:33 p.m. UTC | #3
On Thu, Oct 31, 2013 at 07:44:22AM -0700, Linus Walleij wrote:
> On Sun, Oct 27, 2013 at 2:24 PM, Sebastian Reichel <sre@debian.org> wrote:

> > +- eci-sw-gpio: GPIO for ECI SW
> > +- speaker-amp-gpio: GPIO for Speaker Amp

> Can you please spell out the acronyms? ECI? SW? Amp?

> I guess SW=switch, Amp=amplifier, but ECI beats me.

ECI is the name of Nokia's accesory interface spec, it should be as
clear as GPIO for anyone working on Nokia hardware (which this is).
Pavel Machek Nov. 6, 2013, 2:32 p.m. UTC | #4
Hi!

> This patch adds device tree support to the Nokia N900 audio driver.

Note, N900 audio driver.

> +- compatible: "nokia,rx51-audio"

Still, it is rx51-audio. If it is feasible, could we move away from
rx51 naming and into n900 naming that is familiar to mere humans?

We can rename the sources later, but I guess we should get dts binding
right first time...
									Pavel
Jarkko Nikula Nov. 30, 2013, 1:28 p.m. UTC | #5
Hi

On 11/06/2013 04:32 PM, Pavel Machek wrote:
> Hi!
> 
>> This patch adds device tree support to the Nokia N900 audio driver.
> 
> Note, N900 audio driver.
> 
>> +- compatible: "nokia,rx51-audio"
> 
> Still, it is rx51-audio. If it is feasible, could we move away from
> rx51 naming and into n900 naming that is familiar to mere humans?
> 
> We can rename the sources later, but I guess we should get dts binding
> right first time...

Sorry the long response. I definitely would like n900 naming more in dts.

History is that the basic board file for N900 went to mainline before
sales started and used the hw name in sources and Kconfig. Audio machine
driver then followed the same rx51 hw naming scheme with rest of sources.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/nokia,rx51.txt b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
new file mode 100644
index 0000000..4f985ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
@@ -0,0 +1,28 @@ 
+* Nokia N900 audio setup
+
+Required properties:
+- compatible: "nokia,rx51-audio"
+- ti,mcbsp: phandle for the McBSP node
+- ti,codec: phandle for the main TLV320AIC3X node
+- ti,codec_aux: phandle for the main TLV320AIC3X auxiliary node
+- ti,headset_amp: phandle for the TPA6130A2 node
+- tvout-selection-gpio: GPIO for tvout selection
+- jack-detection-gpio: GPIO for jack detection
+- eci-sw-gpio: GPIO for ECI SW
+- speaker-amp-gpio: GPIO for Speaker Amp
+
+Example:
+
+sound {
+	compatible = "nokia,rx51-audio";
+
+	ti,mcbsp = <&mcbsp2>;
+	ti,codec = <&tlv320aic3x>;
+	ti,codec_aux = <&tlv320aic3x_aux>;
+	ti,headset_amp = <&tpa6130a2>;
+
+	tvout-selection-gpio = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+	jack-detection-gpio = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+	eci-sw-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+	speaker-amp-gpio = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2956800..2cc3dad 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -42,6 +42,7 @@  microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.
 national	National Semiconductor
 nintendo	Nintendo
+nokia	Nokia Corporation
 nvidia	NVIDIA
 nxp	NXP Semiconductors
 onnn	ON Semiconductor Corp.
diff --git a/include/sound/rx51.h b/include/sound/rx51.h
new file mode 100644
index 0000000..190d745
--- /dev/null
+++ b/include/sound/rx51.h
@@ -0,0 +1,18 @@ 
+/*
+ * Platform data for Nokia RX-51 SoC audio
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __RX51_AUDIO_H__
+#define __RX51_AUDIO_H__
+
+struct rx51_audio_pdata {
+	int tvout_selection_gpio;
+	int jack_detection_gpio;
+	int eci_sw_gpio;
+	int speaker_amp_gpio;
+};
+
+#endif
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 6c19bba..f88e31e 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -691,7 +691,7 @@  OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP" #port " Sidetone Channel 1 Volume", \
 OMAP_MCBSP_ST_CONTROLS(2);
 OMAP_MCBSP_ST_CONTROLS(3);
 
-int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd)
+int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd, int port_id)
 {
 	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
@@ -701,7 +701,7 @@  int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd)
 		return 0;
 	}
 
-	switch (mcbsp->id) {
+	switch (port_id) {
 	case 2: /* McBSP 2 */
 		return snd_soc_add_dai_controls(cpu_dai,
 					omap_mcbsp2_st_controls,
@@ -711,6 +711,7 @@  int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd)
 					omap_mcbsp3_st_controls,
 					ARRAY_SIZE(omap_mcbsp3_st_controls));
 	default:
+		dev_err(mcbsp->dev, "Port %d not supported\n", port_id);
 		break;
 	}
 
diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h
index ba8386a..2e3369c 100644
--- a/sound/soc/omap/omap-mcbsp.h
+++ b/sound/soc/omap/omap-mcbsp.h
@@ -39,6 +39,6 @@  enum omap_mcbsp_div {
 	OMAP_MCBSP_CLKGDV,		/* Sample rate generator divider */
 };
 
-int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd);
+int omap_mcbsp_st_add_controls(struct snd_soc_pcm_runtime *rtd, int port_id);
 
 #endif
diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
index 41f26ae..aa44108 100644
--- a/sound/soc/omap/rx51.c
+++ b/sound/soc/omap/rx51.c
@@ -26,11 +26,13 @@ 
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <linux/of_gpio.h>
 #include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
+#include <sound/rx51.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include "../codecs/tpa6130a2.h"
 
@@ -38,15 +40,6 @@ 
 
 #include "omap-mcbsp.h"
 
-#define RX51_TVOUT_SEL_GPIO		40
-#define RX51_JACK_DETECT_GPIO		177
-#define RX51_ECI_SW_GPIO		182
-/*
- * REVISIT: TWL4030 GPIO base in RX-51. Now statically defined to 192. This
- * gpio is reserved in arch/arm/mach-omap2/board-rx51-peripherals.c
- */
-#define RX51_SPEAKER_AMP_TWL_GPIO	(192 + 7)
-
 enum {
 	RX51_JACK_DISABLED,
 	RX51_JACK_TVOUT,		/* tv-out with stereo output */
@@ -60,6 +53,8 @@  static int rx51_jack_func;
 
 static void rx51_ext_control(struct snd_soc_dapm_context *dapm)
 {
+	struct snd_soc_card *card = dapm->card;
+	struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
 	int hp = 0, hs = 0, tvout = 0;
 
 	switch (rx51_jack_func) {
@@ -91,7 +86,7 @@  static void rx51_ext_control(struct snd_soc_dapm_context *dapm)
 	else
 		snd_soc_dapm_disable_pin(dapm, "HS Mic");
 
-	gpio_set_value(RX51_TVOUT_SEL_GPIO, tvout);
+	gpio_set_value(pdata->tvout_selection_gpio, tvout);
 
 	snd_soc_dapm_sync(dapm);
 }
@@ -150,10 +145,12 @@  static int rx51_set_spk(struct snd_kcontrol *kcontrol,
 static int rx51_spk_event(struct snd_soc_dapm_widget *w,
 			  struct snd_kcontrol *k, int event)
 {
-	if (SND_SOC_DAPM_EVENT_ON(event))
-		gpio_set_value_cansleep(RX51_SPEAKER_AMP_TWL_GPIO, 1);
-	else
-		gpio_set_value_cansleep(RX51_SPEAKER_AMP_TWL_GPIO, 0);
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct snd_soc_card *card = dapm->card;
+	struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
+
+	gpio_set_value_cansleep(pdata->speaker_amp_gpio,
+				!!SND_SOC_DAPM_EVENT_ON(event));
 
 	return 0;
 }
@@ -219,7 +216,6 @@  static struct snd_soc_jack rx51_av_jack;
 
 static struct snd_soc_jack_gpio rx51_av_jack_gpios[] = {
 	{
-		.gpio = RX51_JACK_DETECT_GPIO,
 		.name = "avdet-gpio",
 		.report = SND_JACK_HEADSET,
 		.invert = 1,
@@ -286,6 +282,9 @@  static const struct snd_kcontrol_new aic34_rx51_controlsb[] = {
 static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_card *card = codec->card;
+	struct rx51_audio_pdata *pdata = snd_soc_card_get_drvdata(card);
+
 	struct snd_soc_dapm_context *dapm = &codec->dapm;
 	int err;
 
@@ -297,8 +296,10 @@  static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
 	/* Add RX-51 specific controls */
 	err = snd_soc_add_card_controls(rtd->card, aic34_rx51_controls,
 				   ARRAY_SIZE(aic34_rx51_controls));
-	if (err < 0)
+	if (err < 0) {
+		dev_err(card->dev, "Failed to add RX-51 specific controls\n");
 		return err;
+	}
 
 	/* Add RX-51 specific widgets */
 	snd_soc_dapm_new_controls(dapm, aic34_dapm_widgets,
@@ -308,25 +309,39 @@  static int rx51_aic34_init(struct snd_soc_pcm_runtime *rtd)
 	snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
 
 	err = tpa6130a2_add_controls(codec);
-	if (err < 0)
+	if (err < 0) {
+		dev_err(card->dev, "Failed to add TPA6130A2 controls\n");
 		return err;
+	}
 	snd_soc_limit_volume(codec, "TPA6130A2 Headphone Playback Volume", 42);
 
-	err = omap_mcbsp_st_add_controls(rtd);
-	if (err < 0)
+	err = omap_mcbsp_st_add_controls(rtd, 2);
+	if (err < 0) {
+		dev_err(card->dev, "Failed to add MCBSP controls\n");
 		return err;
+	}
 
 	/* AV jack detection */
 	err = snd_soc_jack_new(codec, "AV Jack",
 			       SND_JACK_HEADSET | SND_JACK_VIDEOOUT,
 			       &rx51_av_jack);
-	if (err)
+	if (err) {
+		dev_err(card->dev, "Failed to add AV Jack\n");
 		return err;
+
+	}
+
+	rx51_av_jack_gpios[0].gpio = pdata->jack_detection_gpio;
+
 	err = snd_soc_jack_add_gpios(&rx51_av_jack,
-				     ARRAY_SIZE(rx51_av_jack_gpios),
-				     rx51_av_jack_gpios);
+				ARRAY_SIZE(rx51_av_jack_gpios),
+				rx51_av_jack_gpios);
+	if (err) {
+		dev_err(card->dev, "Failed to add GPIOs\n");
+		return err;
+	}
 
-	return err;
+	return 0;
 }
 
 static int rx51_aic34b_init(struct snd_soc_dapm_context *dapm)
@@ -392,37 +407,106 @@  static struct snd_soc_card rx51_sound_card = {
 
 static int rx51_soc_probe(struct platform_device *pdev)
 {
+	struct rx51_audio_pdata *pdata = pdev->dev.platform_data;
+	struct device_node *np = pdev->dev.of_node;
 	struct snd_soc_card *card = &rx51_sound_card;
 	int err;
 
 	if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
 		return -ENODEV;
 
-	err = gpio_request_one(RX51_TVOUT_SEL_GPIO,
+	card->dev = &pdev->dev;
+
+	if (np) {
+		struct device_node *dai_node;
+
+		pdata = devm_kzalloc(&pdev->dev,
+				sizeof(struct rx51_audio_pdata), GFP_KERNEL);
+
+		if (pdata == NULL) {
+			dev_err(card->dev, "failed to create private data\n");
+			return -ENOMEM;
+		}
+
+		pdata->tvout_selection_gpio =
+			of_get_named_gpio(np, "tvout-selection-gpio", 0);
+		pdata->jack_detection_gpio  =
+			of_get_named_gpio(np, "jack-detection-gpio", 0);
+		pdata->eci_sw_gpio = of_get_named_gpio(np, "eci-sw-gpio", 0);
+		pdata->speaker_amp_gpio =
+			of_get_named_gpio(np, "speaker-amp-gpio", 0);
+
+		dai_node = of_parse_phandle(np, "ti,mcbsp", 0);
+		if (!dai_node) {
+			dev_err(&pdev->dev, "McBSP node is not provided\n");
+			return -EINVAL;
+		}
+		rx51_dai[0].cpu_dai_name = NULL;
+		rx51_dai[0].cpu_of_node = dai_node;
+
+		dai_node = of_parse_phandle(np, "ti,codec", 0);
+		if (!dai_node) {
+			dev_err(&pdev->dev, "Codec node is not provided\n");
+			return -EINVAL;
+		}
+		rx51_dai[0].codec_name = NULL;
+		rx51_dai[0].codec_of_node = dai_node;
+
+		dai_node = of_parse_phandle(np, "ti,codec_aux", 0);
+		if (!dai_node) {
+			dev_err(&pdev->dev, "Auxiliary Codec node is not provided\n");
+			return -EINVAL;
+		}
+		rx51_aux_dev[0].codec_name = NULL;
+		rx51_aux_dev[0].codec_of_node = dai_node;
+		rx51_codec_conf[0].dev_name = NULL;
+		rx51_codec_conf[0].of_node = dai_node;
+
+		if (pdata->tvout_selection_gpio == -EPROBE_DEFER ||
+		    pdata->jack_detection_gpio == -EPROBE_DEFER ||
+		    pdata->eci_sw_gpio == -EPROBE_DEFER ||
+		    pdata->speaker_amp_gpio == -EPROBE_DEFER) {
+			devm_kfree(card->dev, pdata);
+			pdev->dev.platform_data = NULL;
+			return -EPROBE_DEFER;
+		}
+
+		pdev->dev.platform_data = pdata;
+	} else if (!pdata) {
+		dev_err(card->dev, "platform data missing");
+		err = -ENODEV;
+		goto error;
+	}
+
+	err = devm_gpio_request_one(card->dev, pdata->tvout_selection_gpio,
 			       GPIOF_DIR_OUT | GPIOF_INIT_LOW, "tvout_sel");
-	if (err)
-		goto err_gpio_tvout_sel;
-	err = gpio_request_one(RX51_ECI_SW_GPIO,
+	if (err) {
+		dev_err(card->dev, "could not setup tvout_sel\n");
+		goto error;
+	}
+	err = devm_gpio_request_one(card->dev, pdata->eci_sw_gpio,
 			       GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "eci_sw");
-	if (err)
-		goto err_gpio_eci_sw;
-
-	card->dev = &pdev->dev;
+	if (err) {
+		dev_err(card->dev, "could not setup eci_sw\n");
+		goto error;
+	}
+	err = devm_gpio_request_one(card->dev, pdata->speaker_amp_gpio,
+			       GPIOF_DIR_OUT | GPIOF_INIT_LOW, "speaker_en");
+	if (err) {
+		dev_err(card->dev, "could not setup speaker_en\n");
+		goto error;
+	}
 
+	snd_soc_card_set_drvdata(card, pdata);
 	err = snd_soc_register_card(card);
 	if (err) {
-		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", err);
-		goto err_snd;
+		dev_err(card->dev, "snd_soc_register_card failed (%d)\n", err);
+		goto error;
 	}
 
 	return 0;
-err_snd:
+error:
 	card->dev = NULL;
-	gpio_free(RX51_ECI_SW_GPIO);
-err_gpio_eci_sw:
-	gpio_free(RX51_TVOUT_SEL_GPIO);
-err_gpio_tvout_sel:
-
 	return err;
 }
 
@@ -436,16 +520,23 @@  static int rx51_soc_remove(struct platform_device *pdev)
 	snd_soc_unregister_card(card);
 	card->dev = NULL;
 
-	gpio_free(RX51_ECI_SW_GPIO);
-	gpio_free(RX51_TVOUT_SEL_GPIO);
-
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id rx51_audio_of_match[] = {
+	{ .compatible = "nokia,rx51-audio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rx51_audio_of_match);
+#endif
+
+
 static struct platform_driver rx51_soc_driver = {
 	.driver = {
 		.name = "rx51-audio",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(rx51_audio_of_match),
 	},
 	.probe = rx51_soc_probe,
 	.remove = rx51_soc_remove,