Message ID | 1386078502-19845-4-git-send-email-luciano.coelho@intel.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Hi, Luciano This patch applies clean on mac80211-next, but to able to test the mesh channel switch, patch entitled "mac80211: fix the mesh channel switch support" is required. So I have used the patch v4 for the testing instead of this one. ---- Chun-Yeow On Tue, Dec 3, 2013 at 9:48 PM, Luciano Coelho <luciano.coelho@intel.com> wrote: > Refactor ieee80211_mesh_process_chanswitch() to use > ieee80211_channel_switch() and avoid code duplication. > > Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> > --- > net/mac80211/cfg.c | 10 +++++-- > net/mac80211/ieee80211_i.h | 6 +++- > net/mac80211/mesh.c | 68 ++++++++++------------------------------------ > net/mac80211/util.c | 1 - > 4 files changed, 27 insertions(+), 58 deletions(-) > > diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c > index b5bc27e..790c15d 100644 > --- a/net/mac80211/cfg.c > +++ b/net/mac80211/cfg.c > @@ -3156,9 +3156,15 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, > params->chandef.chan->band) > return -EINVAL; > > - err = ieee80211_mesh_csa_beacon(sdata, params, true); > - if (err < 0) > + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) > + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT; > + > + err = ieee80211_mesh_csa_beacon(sdata, params, > + (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT)); > + if (err < 0) { > + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; > return err; > + } > break; > #endif > default: > diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h > index a7b4d55..cf38a74 100644 > --- a/net/mac80211/ieee80211_i.h > +++ b/net/mac80211/ieee80211_i.h > @@ -611,7 +611,11 @@ struct ieee80211_if_mesh { > struct ps_data ps; > /* Channel Switching Support */ > struct mesh_csa_settings __rcu *csa; > - bool chsw_init; > + enum { > + IEEE80211_MESH_CSA_ROLE_NONE, > + IEEE80211_MESH_CSA_ROLE_INIT, > + IEEE80211_MESH_CSA_ROLE_REPEATER, > + } csa_role; > u8 chsw_ttl; > u16 pre_value; > }; > diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c > index 330d1f7..980cc12 100644 > --- a/net/mac80211/mesh.c > +++ b/net/mac80211/mesh.c > @@ -685,7 +685,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) > *pos++ = csa->settings.count; > *pos++ = WLAN_EID_CHAN_SWITCH_PARAM; > *pos++ = 6; > - if (ifmsh->chsw_init) { > + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) { > *pos++ = ifmsh->mshcfg.dot11MeshTTL; > *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; > } else { > @@ -853,19 +853,11 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, > { > struct cfg80211_csa_settings params; > struct ieee80211_csa_ie csa_ie; > - struct ieee80211_chanctx_conf *chanctx_conf; > - struct ieee80211_chanctx *chanctx; > struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; > enum ieee80211_band band = ieee80211_get_sdata_band(sdata); > - int err, num_chanctx; > + int err; > u32 sta_flags; > > - if (sdata->vif.csa_active) > - return true; > - > - if (!ifmsh->mesh_id) > - return false; > - > sta_flags = IEEE80211_STA_DISABLE_VHT; > switch (sdata->vif.bss_conf.chandef.width) { > case NL80211_CHAN_WIDTH_20_NOHT: > @@ -890,10 +882,6 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, > params.chandef = csa_ie.chandef; > params.count = csa_ie.count; > > - if (sdata->vif.bss_conf.chandef.chan->band != > - params.chandef.chan->band) > - return false; > - > if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef, > IEEE80211_CHAN_DISABLED)) { > sdata_info(sdata, > @@ -916,25 +904,6 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, > return false; > } > > - rcu_read_lock(); > - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); > - if (!chanctx_conf) > - goto failed_chswitch; > - > - /* don't handle for multi-VIF cases */ > - chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf); > - if (chanctx->refcount > 1) > - goto failed_chswitch; > - > - num_chanctx = 0; > - list_for_each_entry_rcu(chanctx, &sdata->local->chanctx_list, list) > - num_chanctx++; > - > - if (num_chanctx > 1) > - goto failed_chswitch; > - > - rcu_read_unlock(); > - > mcsa_dbg(sdata, > "received channel switch announcement to go to channel %d MHz\n", > params.chandef.chan->center_freq); > @@ -945,27 +914,16 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, > else > ifmsh->chsw_ttl = 0; > > - if (ifmsh->chsw_ttl > 0) > - if (ieee80211_mesh_csa_beacon(sdata, ¶ms, false) < 0) > - return false; > - > - sdata->csa_radar_required = params.radar_required; > - > - if (params.block_tx) > - ieee80211_stop_queues_by_reason(&sdata->local->hw, > - IEEE80211_MAX_QUEUE_MAP, > - IEEE80211_QUEUE_STOP_REASON_CSA); > + if (ifmsh->chsw_ttl == 0) > + return false; > > - sdata->csa_chandef = params.chandef; > - sdata->vif.csa_active = true; > + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER; > > - ieee80211_bss_info_change_notify(sdata, err); > - drv_channel_switch_beacon(sdata, ¶ms.chandef); > + if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev, > + ¶ms) < 0) > + return false; > > return true; > -failed_chswitch: > - rcu_read_unlock(); > - return false; > } > > static void > @@ -1075,7 +1033,8 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, > ifmsh->sync_ops->rx_bcn_presp(sdata, > stype, mgmt, &elems, rx_status); > > - if (!ifmsh->chsw_init) > + if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT && > + !sdata->vif.csa_active) > ieee80211_mesh_process_chnswitch(sdata, &elems, true); > } > > @@ -1086,7 +1045,7 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata) > int ret = 0; > > /* Reset the TTL value and Initiator flag */ > - ifmsh->chsw_init = false; > + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; > ifmsh->chsw_ttl = 0; > > /* Remove the CSA and MCSP elements from the beacon */ > @@ -1200,7 +1159,8 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, > > ifmsh->pre_value = pre_value; > > - if (!ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { > + if (!sdata->vif.csa_active && > + !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { > mcsa_dbg(sdata, "Failed to process CSA action frame"); > return; > } > @@ -1355,7 +1315,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) > mesh_rmc_init(sdata); > ifmsh->last_preq = jiffies; > ifmsh->next_perr = jiffies; > - ifmsh->chsw_init = false; > + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; > /* Allocate all mesh structures when creating the first mesh interface. */ > if (!mesh_allocated) > ieee80211s_init(); > diff --git a/net/mac80211/util.c b/net/mac80211/util.c > index 06265d7..f153ab4 100644 > --- a/net/mac80211/util.c > +++ b/net/mac80211/util.c > @@ -2487,7 +2487,6 @@ int ieee80211_send_action_csa(struct ieee80211_sub_if_data *sdata, > ifmsh->pre_value++; > put_unaligned_le16(ifmsh->pre_value, pos);/* Precedence Value */ > pos += 2; > - ifmsh->chsw_init = true; > } > > ieee80211_tx_skb(sdata, skb); > -- > 1.8.4.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Sorry, should be patch v5. On Wed, Dec 4, 2013 at 5:36 PM, Yeoh Chun-Yeow <yeohchunyeow@gmail.com> wrote: > Hi, Luciano > > This patch applies clean on mac80211-next, but to able to test the > mesh channel switch, patch entitled "mac80211: fix the mesh channel > switch support" is required. > > So I have used the patch v4 for the testing instead of this one. > > ---- > Chun-Yeow > > On Tue, Dec 3, 2013 at 9:48 PM, Luciano Coelho <luciano.coelho@intel.com> wrote: >> Refactor ieee80211_mesh_process_chanswitch() to use >> ieee80211_channel_switch() and avoid code duplication. >> >> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> >> --- >> net/mac80211/cfg.c | 10 +++++-- >> net/mac80211/ieee80211_i.h | 6 +++- >> net/mac80211/mesh.c | 68 ++++++++++------------------------------------ >> net/mac80211/util.c | 1 - >> 4 files changed, 27 insertions(+), 58 deletions(-) >> >> diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c >> index b5bc27e..790c15d 100644 >> --- a/net/mac80211/cfg.c >> +++ b/net/mac80211/cfg.c >> @@ -3156,9 +3156,15 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, >> params->chandef.chan->band) >> return -EINVAL; >> >> - err = ieee80211_mesh_csa_beacon(sdata, params, true); >> - if (err < 0) >> + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) >> + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT; >> + >> + err = ieee80211_mesh_csa_beacon(sdata, params, >> + (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT)); >> + if (err < 0) { >> + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; >> return err; >> + } >> break; >> #endif >> default: >> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h >> index a7b4d55..cf38a74 100644 >> --- a/net/mac80211/ieee80211_i.h >> +++ b/net/mac80211/ieee80211_i.h >> @@ -611,7 +611,11 @@ struct ieee80211_if_mesh { >> struct ps_data ps; >> /* Channel Switching Support */ >> struct mesh_csa_settings __rcu *csa; >> - bool chsw_init; >> + enum { >> + IEEE80211_MESH_CSA_ROLE_NONE, >> + IEEE80211_MESH_CSA_ROLE_INIT, >> + IEEE80211_MESH_CSA_ROLE_REPEATER, >> + } csa_role; >> u8 chsw_ttl; >> u16 pre_value; >> }; >> diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c >> index 330d1f7..980cc12 100644 >> --- a/net/mac80211/mesh.c >> +++ b/net/mac80211/mesh.c >> @@ -685,7 +685,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) >> *pos++ = csa->settings.count; >> *pos++ = WLAN_EID_CHAN_SWITCH_PARAM; >> *pos++ = 6; >> - if (ifmsh->chsw_init) { >> + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) { >> *pos++ = ifmsh->mshcfg.dot11MeshTTL; >> *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; >> } else { >> @@ -853,19 +853,11 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, >> { >> struct cfg80211_csa_settings params; >> struct ieee80211_csa_ie csa_ie; >> - struct ieee80211_chanctx_conf *chanctx_conf; >> - struct ieee80211_chanctx *chanctx; >> struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; >> enum ieee80211_band band = ieee80211_get_sdata_band(sdata); >> - int err, num_chanctx; >> + int err; >> u32 sta_flags; >> >> - if (sdata->vif.csa_active) >> - return true; >> - >> - if (!ifmsh->mesh_id) >> - return false; >> - >> sta_flags = IEEE80211_STA_DISABLE_VHT; >> switch (sdata->vif.bss_conf.chandef.width) { >> case NL80211_CHAN_WIDTH_20_NOHT: >> @@ -890,10 +882,6 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, >> params.chandef = csa_ie.chandef; >> params.count = csa_ie.count; >> >> - if (sdata->vif.bss_conf.chandef.chan->band != >> - params.chandef.chan->band) >> - return false; >> - >> if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef, >> IEEE80211_CHAN_DISABLED)) { >> sdata_info(sdata, >> @@ -916,25 +904,6 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, >> return false; >> } >> >> - rcu_read_lock(); >> - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); >> - if (!chanctx_conf) >> - goto failed_chswitch; >> - >> - /* don't handle for multi-VIF cases */ >> - chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf); >> - if (chanctx->refcount > 1) >> - goto failed_chswitch; >> - >> - num_chanctx = 0; >> - list_for_each_entry_rcu(chanctx, &sdata->local->chanctx_list, list) >> - num_chanctx++; >> - >> - if (num_chanctx > 1) >> - goto failed_chswitch; >> - >> - rcu_read_unlock(); >> - >> mcsa_dbg(sdata, >> "received channel switch announcement to go to channel %d MHz\n", >> params.chandef.chan->center_freq); >> @@ -945,27 +914,16 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, >> else >> ifmsh->chsw_ttl = 0; >> >> - if (ifmsh->chsw_ttl > 0) >> - if (ieee80211_mesh_csa_beacon(sdata, ¶ms, false) < 0) >> - return false; >> - >> - sdata->csa_radar_required = params.radar_required; >> - >> - if (params.block_tx) >> - ieee80211_stop_queues_by_reason(&sdata->local->hw, >> - IEEE80211_MAX_QUEUE_MAP, >> - IEEE80211_QUEUE_STOP_REASON_CSA); >> + if (ifmsh->chsw_ttl == 0) >> + return false; >> >> - sdata->csa_chandef = params.chandef; >> - sdata->vif.csa_active = true; >> + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER; >> >> - ieee80211_bss_info_change_notify(sdata, err); >> - drv_channel_switch_beacon(sdata, ¶ms.chandef); >> + if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev, >> + ¶ms) < 0) >> + return false; >> >> return true; >> -failed_chswitch: >> - rcu_read_unlock(); >> - return false; >> } >> >> static void >> @@ -1075,7 +1033,8 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, >> ifmsh->sync_ops->rx_bcn_presp(sdata, >> stype, mgmt, &elems, rx_status); >> >> - if (!ifmsh->chsw_init) >> + if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT && >> + !sdata->vif.csa_active) >> ieee80211_mesh_process_chnswitch(sdata, &elems, true); >> } >> >> @@ -1086,7 +1045,7 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata) >> int ret = 0; >> >> /* Reset the TTL value and Initiator flag */ >> - ifmsh->chsw_init = false; >> + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; >> ifmsh->chsw_ttl = 0; >> >> /* Remove the CSA and MCSP elements from the beacon */ >> @@ -1200,7 +1159,8 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, >> >> ifmsh->pre_value = pre_value; >> >> - if (!ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { >> + if (!sdata->vif.csa_active && >> + !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { >> mcsa_dbg(sdata, "Failed to process CSA action frame"); >> return; >> } >> @@ -1355,7 +1315,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) >> mesh_rmc_init(sdata); >> ifmsh->last_preq = jiffies; >> ifmsh->next_perr = jiffies; >> - ifmsh->chsw_init = false; >> + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; >> /* Allocate all mesh structures when creating the first mesh interface. */ >> if (!mesh_allocated) >> ieee80211s_init(); >> diff --git a/net/mac80211/util.c b/net/mac80211/util.c >> index 06265d7..f153ab4 100644 >> --- a/net/mac80211/util.c >> +++ b/net/mac80211/util.c >> @@ -2487,7 +2487,6 @@ int ieee80211_send_action_csa(struct ieee80211_sub_if_data *sdata, >> ifmsh->pre_value++; >> put_unaligned_le16(ifmsh->pre_value, pos);/* Precedence Value */ >> pos += 2; >> - ifmsh->chsw_init = true; >> } >> >> ieee80211_tx_skb(sdata, skb); >> -- >> 1.8.4.2 >> -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index b5bc27e..790c15d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -3156,9 +3156,15 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, params->chandef.chan->band) return -EINVAL; - err = ieee80211_mesh_csa_beacon(sdata, params, true); - if (err < 0) + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT; + + err = ieee80211_mesh_csa_beacon(sdata, params, + (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT)); + if (err < 0) { + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; return err; + } break; #endif default: diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a7b4d55..cf38a74 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -611,7 +611,11 @@ struct ieee80211_if_mesh { struct ps_data ps; /* Channel Switching Support */ struct mesh_csa_settings __rcu *csa; - bool chsw_init; + enum { + IEEE80211_MESH_CSA_ROLE_NONE, + IEEE80211_MESH_CSA_ROLE_INIT, + IEEE80211_MESH_CSA_ROLE_REPEATER, + } csa_role; u8 chsw_ttl; u16 pre_value; }; diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 330d1f7..980cc12 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -685,7 +685,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) *pos++ = csa->settings.count; *pos++ = WLAN_EID_CHAN_SWITCH_PARAM; *pos++ = 6; - if (ifmsh->chsw_init) { + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) { *pos++ = ifmsh->mshcfg.dot11MeshTTL; *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; } else { @@ -853,19 +853,11 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, { struct cfg80211_csa_settings params; struct ieee80211_csa_ie csa_ie; - struct ieee80211_chanctx_conf *chanctx_conf; - struct ieee80211_chanctx *chanctx; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; enum ieee80211_band band = ieee80211_get_sdata_band(sdata); - int err, num_chanctx; + int err; u32 sta_flags; - if (sdata->vif.csa_active) - return true; - - if (!ifmsh->mesh_id) - return false; - sta_flags = IEEE80211_STA_DISABLE_VHT; switch (sdata->vif.bss_conf.chandef.width) { case NL80211_CHAN_WIDTH_20_NOHT: @@ -890,10 +882,6 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, params.chandef = csa_ie.chandef; params.count = csa_ie.count; - if (sdata->vif.bss_conf.chandef.chan->band != - params.chandef.chan->band) - return false; - if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef, IEEE80211_CHAN_DISABLED)) { sdata_info(sdata, @@ -916,25 +904,6 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, return false; } - rcu_read_lock(); - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); - if (!chanctx_conf) - goto failed_chswitch; - - /* don't handle for multi-VIF cases */ - chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf); - if (chanctx->refcount > 1) - goto failed_chswitch; - - num_chanctx = 0; - list_for_each_entry_rcu(chanctx, &sdata->local->chanctx_list, list) - num_chanctx++; - - if (num_chanctx > 1) - goto failed_chswitch; - - rcu_read_unlock(); - mcsa_dbg(sdata, "received channel switch announcement to go to channel %d MHz\n", params.chandef.chan->center_freq); @@ -945,27 +914,16 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, else ifmsh->chsw_ttl = 0; - if (ifmsh->chsw_ttl > 0) - if (ieee80211_mesh_csa_beacon(sdata, ¶ms, false) < 0) - return false; - - sdata->csa_radar_required = params.radar_required; - - if (params.block_tx) - ieee80211_stop_queues_by_reason(&sdata->local->hw, - IEEE80211_MAX_QUEUE_MAP, - IEEE80211_QUEUE_STOP_REASON_CSA); + if (ifmsh->chsw_ttl == 0) + return false; - sdata->csa_chandef = params.chandef; - sdata->vif.csa_active = true; + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER; - ieee80211_bss_info_change_notify(sdata, err); - drv_channel_switch_beacon(sdata, ¶ms.chandef); + if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev, + ¶ms) < 0) + return false; return true; -failed_chswitch: - rcu_read_unlock(); - return false; } static void @@ -1075,7 +1033,8 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, ifmsh->sync_ops->rx_bcn_presp(sdata, stype, mgmt, &elems, rx_status); - if (!ifmsh->chsw_init) + if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT && + !sdata->vif.csa_active) ieee80211_mesh_process_chnswitch(sdata, &elems, true); } @@ -1086,7 +1045,7 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata) int ret = 0; /* Reset the TTL value and Initiator flag */ - ifmsh->chsw_init = false; + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; ifmsh->chsw_ttl = 0; /* Remove the CSA and MCSP elements from the beacon */ @@ -1200,7 +1159,8 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, ifmsh->pre_value = pre_value; - if (!ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { + if (!sdata->vif.csa_active && + !ieee80211_mesh_process_chnswitch(sdata, &elems, false)) { mcsa_dbg(sdata, "Failed to process CSA action frame"); return; } @@ -1355,7 +1315,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) mesh_rmc_init(sdata); ifmsh->last_preq = jiffies; ifmsh->next_perr = jiffies; - ifmsh->chsw_init = false; + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; /* Allocate all mesh structures when creating the first mesh interface. */ if (!mesh_allocated) ieee80211s_init(); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 06265d7..f153ab4 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2487,7 +2487,6 @@ int ieee80211_send_action_csa(struct ieee80211_sub_if_data *sdata, ifmsh->pre_value++; put_unaligned_le16(ifmsh->pre_value, pos);/* Precedence Value */ pos += 2; - ifmsh->chsw_init = true; } ieee80211_tx_skb(sdata, skb);
Refactor ieee80211_mesh_process_chanswitch() to use ieee80211_channel_switch() and avoid code duplication. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> --- net/mac80211/cfg.c | 10 +++++-- net/mac80211/ieee80211_i.h | 6 +++- net/mac80211/mesh.c | 68 ++++++++++------------------------------------ net/mac80211/util.c | 1 - 4 files changed, 27 insertions(+), 58 deletions(-)