diff mbox

[V1,09/11] ARM: dts: imx6qdl-sabrelite: fix ENET group

Message ID 1386899355-17379-10-git-send-email-troy.kisky@boundarydevices.com (mailing list archive)
State New, archived
Headers show

Commit Message

Troy Kisky Dec. 13, 2013, 1:49 a.m. UTC 
GPIO16 is used for I2C3, not ENET_REF_CLK.
Replace MX6QDL_ENET_PINGRP1 with explicit list.
Also, remove pull-ups from tx pins.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

Comments

Marek Vasut Dec. 13, 2013, 11:54 a.m. UTC | #1 
On Friday, December 13, 2013 at 02:49:13 AM, Troy Kisky wrote:
> GPIO16 is used for I2C3, not ENET_REF_CLK.
> Replace MX6QDL_ENET_PINGRP1 with explicit list.
> Also, remove pull-ups from tx pins.

Reviewed-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 38b9555..24e4c81 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -210,7 +210,23 @@ 
 		};
 
 		pinctrl_enet: enetgrp {
-			fsl,pins = <MX6QDL_ENET_PINGRP1>;
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			>;
 		};
 
 		pinctrl_i2c1: i2c1grp {