diff mbox

[2/2] gpio: davinci: reuse for Keystone SoC

Message ID 1386871973-26762-3-git-send-email-grygorii.strashko@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Grygorii Strashko Dec. 12, 2013, 6:12 p.m. UTC
The similar GPIO HW block is used by keystone SoCs as
in Davinci SoCs.
Hence, reuse Davinci GPIO driver for Keystone taking into
account that Keystone contains ARM GIC IRQ controller which
is implemented using IRQ Chip.

Documentation:
	http://www.ti.com/lit/ug/sprugv1/sprugv1.pdf

CC: Linus Walleij <linus.walleij@linaro.org>
CC: Sekhar Nori <nsekhar@ti.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: devicetree@vger.kernel.org

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 .../devicetree/bindings/gpio/gpio-davinci.txt      |    4 +-
 drivers/gpio/gpio-davinci.c                        |   49 +++++++++++++++-----
 2 files changed, 40 insertions(+), 13 deletions(-)

Comments

Alexandre Courbot Dec. 16, 2013, 7:29 a.m. UTC | #1
On Fri, Dec 13, 2013 at 3:12 AM, Grygorii Strashko
<grygorii.strashko@ti.com> wrote:
> The similar GPIO HW block is used by keystone SoCs as
> in Davinci SoCs.
> Hence, reuse Davinci GPIO driver for Keystone taking into
> account that Keystone contains ARM GIC IRQ controller which
> is implemented using IRQ Chip.
>
> Documentation:
>         http://www.ti.com/lit/ug/sprugv1/sprugv1.pdf
>
> CC: Linus Walleij <linus.walleij@linaro.org>
> CC: Sekhar Nori <nsekhar@ti.com>
> CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
> CC: devicetree@vger.kernel.org
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
>  .../devicetree/bindings/gpio/gpio-davinci.txt      |    4 +-
>  drivers/gpio/gpio-davinci.c                        |   49 +++++++++++++++-----
>  2 files changed, 40 insertions(+), 13 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> index a2e839d..4ce9862 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> @@ -1,7 +1,7 @@
> -Davinci GPIO controller bindings
> +Davinci/Keystone GPIO controller bindings
>
>  Required Properties:
> -- compatible: should be "ti,dm6441-gpio"
> +- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
>
>  - reg: Physical base address of the controller and the size of memory mapped
>         registers.
> diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
> index 73f65ca..3e44e0c 100644
> --- a/drivers/gpio/gpio-davinci.c
> +++ b/drivers/gpio/gpio-davinci.c
> @@ -413,6 +413,27 @@ static const struct irq_domain_ops davinci_gpio_irq_ops = {
>         .xlate = irq_domain_xlate_onetwocell,
>  };
>
> +static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq)
> +{
> +       static struct irq_chip_type gpio_unbanked;
> +
> +       gpio_unbanked = *container_of(irq_get_chip(irq),
> +                                     struct irq_chip_type, chip);
> +
> +       return &gpio_unbanked.chip;
> +};
> +
> +static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq)
> +{
> +       static struct irq_chip gpio_unbanked;
> +
> +       gpio_unbanked = *irq_get_chip(irq);
> +       pr_err("keystone_gpio_get_irq_chip\n");

Do you intend this pr_err() to remain here?

> +       return &gpio_unbanked;
> +};
> +
> +static const struct of_device_id davinci_gpio_ids[];
> +
>  /*
>   * NOTE:  for suspend/resume, probably best to make a platform_device with
>   * suspend_late/resume_resume calls hooking into results of the set_wake()
> @@ -433,6 +454,15 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>         struct davinci_gpio_platform_data *pdata = dev->platform_data;
>         struct davinci_gpio_regs __iomem *g;
>         struct irq_domain       *irq_domain = NULL;
> +       const struct of_device_id *match;
> +       struct irq_chip *irq_chip;
> +       struct irq_chip *(*gpio_get_irq_chip)(unsigned int irq);
> +
> +       gpio_get_irq_chip = davinci_gpio_get_irq_chip;
> +       match = of_match_device(of_match_ptr(davinci_gpio_ids),
> +                               dev);
> +       if (match)
> +               gpio_get_irq_chip = match->data;
>
>         ngpio = pdata->ngpio;
>         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> @@ -442,7 +472,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>         }
>
>         bank_irq = res->start;
> -
>         if (!bank_irq) {
>                 dev_err(dev, "Invalid IRQ resource\n");
>                 return -ENODEV;
> @@ -484,25 +513,22 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>         }
>
>         /*
> -        * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
> +        * INTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
>          * controller only handling trigger modes.  We currently assume no
>          * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
>          */
>         if (pdata->gpio_unbanked) {
> -               static struct irq_chip_type gpio_unbanked;
> -
>                 /* pass "bank 0" GPIO IRQs to AINTC */
>                 chips[0].chip.to_irq = gpio_to_irq_unbanked;
>                 chips[0].gpio_irq = bank_irq;
>                 chips[0].gpio_unbanked = pdata->gpio_unbanked;
>                 binten = BIT(0);
>
> -               /* AINTC handles mask/unmask; GPIO handles triggering */
> +               /* INTC handles mask/unmask; GPIO handles triggering */
>                 irq = bank_irq;
> -               gpio_unbanked = *container_of(irq_get_chip(irq),
> -                                             struct irq_chip_type, chip);
> -               gpio_unbanked.chip.name = "GPIO-AINTC";
> -               gpio_unbanked.chip.irq_set_type = gpio_irq_type_unbanked;
> +               irq_chip = gpio_get_irq_chip(irq);
> +               irq_chip->name = "GPIO-AINTC";

According to the other renamings I see in this file, shouldn't the
string also be changed to "GPIO-INTC"?
Grygorii Strashko Dec. 16, 2013, 11:18 a.m. UTC | #2
On 12/16/2013 09:29 AM, Alexandre Courbot wrote:
> On Fri, Dec 13, 2013 at 3:12 AM, Grygorii Strashko
> <grygorii.strashko@ti.com> wrote:
>> The similar GPIO HW block is used by keystone SoCs as
>> in Davinci SoCs.
>> Hence, reuse Davinci GPIO driver for Keystone taking into
>> account that Keystone contains ARM GIC IRQ controller which
>> is implemented using IRQ Chip.
>>
>> Documentation:
>>          http://www.ti.com/lit/ug/sprugv1/sprugv1.pdf
>>
>> CC: Linus Walleij <linus.walleij@linaro.org>
>> CC: Sekhar Nori <nsekhar@ti.com>
>> CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
>> CC: devicetree@vger.kernel.org
>>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>> ---
>>   .../devicetree/bindings/gpio/gpio-davinci.txt      |    4 +-
>>   drivers/gpio/gpio-davinci.c                        |   49 +++++++++++++++-----
>>   2 files changed, 40 insertions(+), 13 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> index a2e839d..4ce9862 100644
>> --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> @@ -1,7 +1,7 @@
>> -Davinci GPIO controller bindings
>> +Davinci/Keystone GPIO controller bindings
>>
>>   Required Properties:
>> -- compatible: should be "ti,dm6441-gpio"
>> +- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
>>
>>   - reg: Physical base address of the controller and the size of memory mapped
>>          registers.
>> diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
>> index 73f65ca..3e44e0c 100644
>> --- a/drivers/gpio/gpio-davinci.c
>> +++ b/drivers/gpio/gpio-davinci.c
>> @@ -413,6 +413,27 @@ static const struct irq_domain_ops davinci_gpio_irq_ops = {
>>          .xlate = irq_domain_xlate_onetwocell,
>>   };
>>
>> +static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq)
>> +{
>> +       static struct irq_chip_type gpio_unbanked;
>> +
>> +       gpio_unbanked = *container_of(irq_get_chip(irq),
>> +                                     struct irq_chip_type, chip);
>> +
>> +       return &gpio_unbanked.chip;
>> +};
>> +
>> +static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq)
>> +{
>> +       static struct irq_chip gpio_unbanked;
>> +
>> +       gpio_unbanked = *irq_get_chip(irq);
>> +       pr_err("keystone_gpio_get_irq_chip\n");
>
> Do you intend this pr_err() to remain here?

No, thanks - will remove.

>
>> +       return &gpio_unbanked;
>> +};
>> +
>> +static const struct of_device_id davinci_gpio_ids[];
>> +
>>   /*
>>    * NOTE:  for suspend/resume, probably best to make a platform_device with
>>    * suspend_late/resume_resume calls hooking into results of the set_wake()
>> @@ -433,6 +454,15 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>>          struct davinci_gpio_platform_data *pdata = dev->platform_data;
>>          struct davinci_gpio_regs __iomem *g;
>>          struct irq_domain       *irq_domain = NULL;
>> +       const struct of_device_id *match;
>> +       struct irq_chip *irq_chip;
>> +       struct irq_chip *(*gpio_get_irq_chip)(unsigned int irq);
>> +
>> +       gpio_get_irq_chip = davinci_gpio_get_irq_chip;
>> +       match = of_match_device(of_match_ptr(davinci_gpio_ids),
>> +                               dev);
>> +       if (match)
>> +               gpio_get_irq_chip = match->data;
>>
>>          ngpio = pdata->ngpio;
>>          res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> @@ -442,7 +472,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>>          }
>>
>>          bank_irq = res->start;
>> -
>>          if (!bank_irq) {
>>                  dev_err(dev, "Invalid IRQ resource\n");
>>                  return -ENODEV;
>> @@ -484,25 +513,22 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>>          }
>>
>>          /*
>> -        * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
>> +        * INTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
>>           * controller only handling trigger modes.  We currently assume no
>>           * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
>>           */
>>          if (pdata->gpio_unbanked) {
>> -               static struct irq_chip_type gpio_unbanked;
>> -
>>                  /* pass "bank 0" GPIO IRQs to AINTC */
>>                  chips[0].chip.to_irq = gpio_to_irq_unbanked;
>>                  chips[0].gpio_irq = bank_irq;
>>                  chips[0].gpio_unbanked = pdata->gpio_unbanked;
>>                  binten = BIT(0);
>>
>> -               /* AINTC handles mask/unmask; GPIO handles triggering */
>> +               /* INTC handles mask/unmask; GPIO handles triggering */
>>                  irq = bank_irq;
>> -               gpio_unbanked = *container_of(irq_get_chip(irq),
>> -                                             struct irq_chip_type, chip);
>> -               gpio_unbanked.chip.name = "GPIO-AINTC";
>> -               gpio_unbanked.chip.irq_set_type = gpio_irq_type_unbanked;
>> +               irq_chip = gpio_get_irq_chip(irq);
>> +               irq_chip->name = "GPIO-AINTC";
>
> According to the other renamings I see in this file, shouldn't the
> string also be changed to "GPIO-INTC"?

Right. Will change, it should be more generic now.

I'll wait a bit for other comments and resend.

Regards,
-grygorii
Santosh Shilimkar Dec. 16, 2013, 4:38 p.m. UTC | #3
On Thursday 12 December 2013 01:12 PM, Grygorii Strashko wrote:
> The similar GPIO HW block is used by keystone SoCs as
> in Davinci SoCs.
> Hence, reuse Davinci GPIO driver for Keystone taking into
> account that Keystone contains ARM GIC IRQ controller which
> is implemented using IRQ Chip.
> 
> Documentation:
> 	http://www.ti.com/lit/ug/sprugv1/sprugv1.pdf
> 
> CC: Linus Walleij <linus.walleij@linaro.org>
> CC: Sekhar Nori <nsekhar@ti.com>
> CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
> CC: devicetree@vger.kernel.org
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
>  .../devicetree/bindings/gpio/gpio-davinci.txt      |    4 +-
>  drivers/gpio/gpio-davinci.c                        |   49 +++++++++++++++-----
>  2 files changed, 40 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> index a2e839d..4ce9862 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
> @@ -1,7 +1,7 @@
> -Davinci GPIO controller bindings
> +Davinci/Keystone GPIO controller bindings
>  
>  Required Properties:
> -- compatible: should be "ti,dm6441-gpio"
> +- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
>  
>  - reg: Physical base address of the controller and the size of memory mapped
>         registers.
> diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
> index 73f65ca..3e44e0c 100644
> --- a/drivers/gpio/gpio-davinci.c
> +++ b/drivers/gpio/gpio-davinci.c
> @@ -413,6 +413,27 @@ static const struct irq_domain_ops davinci_gpio_irq_ops = {
>  	.xlate = irq_domain_xlate_onetwocell,
>  };
>  
> +static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq)
> +{
> +	static struct irq_chip_type gpio_unbanked;
> +
> +	gpio_unbanked = *container_of(irq_get_chip(irq),
> +				      struct irq_chip_type, chip);
> +
> +	return &gpio_unbanked.chip;
> +};
> +
> +static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq)
> +{
> +	static struct irq_chip gpio_unbanked;
> +
> +	gpio_unbanked = *irq_get_chip(irq);
> +	pr_err("keystone_gpio_get_irq_chip\n");
> +	return &gpio_unbanked;
> +};
> +
> +static const struct of_device_id davinci_gpio_ids[];
> +
>  /*
>   * NOTE:  for suspend/resume, probably best to make a platform_device with
>   * suspend_late/resume_resume calls hooking into results of the set_wake()
> @@ -433,6 +454,15 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>  	struct davinci_gpio_platform_data *pdata = dev->platform_data;
>  	struct davinci_gpio_regs __iomem *g;
>  	struct irq_domain	*irq_domain = NULL;
> +	const struct of_device_id *match;
> +	struct irq_chip *irq_chip;
> +	struct irq_chip *(*gpio_get_irq_chip)(unsigned int irq);
> +
> +	gpio_get_irq_chip = davinci_gpio_get_irq_chip;
> +	match = of_match_device(of_match_ptr(davinci_gpio_ids),
> +				dev);
> +	if (match)
> +		gpio_get_irq_chip = match->data;
and if the DT node is not populated ?
>  
>  	ngpio = pdata->ngpio;
>  	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> @@ -442,7 +472,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>  	}
>  
>  	bank_irq = res->start;
> -
stray change..

>  	if (!bank_irq) {
>  		dev_err(dev, "Invalid IRQ resource\n");
>  		return -ENODEV;
> @@ -484,25 +513,22 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>  	}
>  
>  	/*
> -	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
> +	 * INTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
So you want to have a generic name here. If you are changing it, change it
across the driver in a separate patch or leave it as is...
I don't think it matters much..

With those comments addressed, you can add my ack.
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko Dec. 16, 2013, 6:02 p.m. UTC | #4
On 12/16/2013 06:38 PM, Santosh Shilimkar wrote:
> On Thursday 12 December 2013 01:12 PM, Grygorii Strashko wrote:
>> The similar GPIO HW block is used by keystone SoCs as
>> in Davinci SoCs.
>> Hence, reuse Davinci GPIO driver for Keystone taking into
>> account that Keystone contains ARM GIC IRQ controller which
>> is implemented using IRQ Chip.
>>
>> Documentation:
>> 	http://www.ti.com/lit/ug/sprugv1/sprugv1.pdf
>>
>> CC: Linus Walleij <linus.walleij@linaro.org>
>> CC: Sekhar Nori <nsekhar@ti.com>
>> CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
>> CC: devicetree@vger.kernel.org
>>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>> ---
>>   .../devicetree/bindings/gpio/gpio-davinci.txt      |    4 +-
>>   drivers/gpio/gpio-davinci.c                        |   49 +++++++++++++++-----
>>   2 files changed, 40 insertions(+), 13 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> index a2e839d..4ce9862 100644
>> --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>> @@ -1,7 +1,7 @@
>> -Davinci GPIO controller bindings
>> +Davinci/Keystone GPIO controller bindings
>>
>>   Required Properties:
>> -- compatible: should be "ti,dm6441-gpio"
>> +- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
>>
>>   - reg: Physical base address of the controller and the size of memory mapped
>>          registers.
>> diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
>> index 73f65ca..3e44e0c 100644
>> --- a/drivers/gpio/gpio-davinci.c
>> +++ b/drivers/gpio/gpio-davinci.c
>> @@ -413,6 +413,27 @@ static const struct irq_domain_ops davinci_gpio_irq_ops = {
>>   	.xlate = irq_domain_xlate_onetwocell,
>>   };
>>
>> +static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq)
>> +{
>> +	static struct irq_chip_type gpio_unbanked;
>> +
>> +	gpio_unbanked = *container_of(irq_get_chip(irq),
>> +				      struct irq_chip_type, chip);
>> +
>> +	return &gpio_unbanked.chip;
>> +};
>> +
>> +static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq)
>> +{
>> +	static struct irq_chip gpio_unbanked;
>> +
>> +	gpio_unbanked = *irq_get_chip(irq);
>> +	pr_err("keystone_gpio_get_irq_chip\n");
>> +	return &gpio_unbanked;
>> +};
>> +
>> +static const struct of_device_id davinci_gpio_ids[];
>> +
>>   /*
>>    * NOTE:  for suspend/resume, probably best to make a platform_device with
>>    * suspend_late/resume_resume calls hooking into results of the set_wake()
>> @@ -433,6 +454,15 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>>   	struct davinci_gpio_platform_data *pdata = dev->platform_data;
>>   	struct davinci_gpio_regs __iomem *g;
>>   	struct irq_domain	*irq_domain = NULL;
>> +	const struct of_device_id *match;
>> +	struct irq_chip *irq_chip;
>> +	struct irq_chip *(*gpio_get_irq_chip)(unsigned int irq);
>> +
>> +	gpio_get_irq_chip = davinci_gpio_get_irq_chip;
>> +	match = of_match_device(of_match_ptr(davinci_gpio_ids),
>> +				dev);
>> +	if (match)
>> +		gpio_get_irq_chip = match->data;
> and if the DT node is not populated ?
>>
>>   	ngpio = pdata->ngpio;
>>   	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> @@ -442,7 +472,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>>   	}
>>
>>   	bank_irq = res->start;
>> -
> stray change..
>
>>   	if (!bank_irq) {
>>   		dev_err(dev, "Invalid IRQ resource\n");
>>   		return -ENODEV;
>> @@ -484,25 +513,22 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
>>   	}
>>
>>   	/*
>> -	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
>> +	 * INTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
> So you want to have a generic name here. If you are changing it, change it
> across the driver in a separate patch or leave it as is...
> I don't think it matters much..

Uh. Ok. I'll drop renaming.


>
> With those comments addressed, you can add my ack.
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
index a2e839d..4ce9862 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
@@ -1,7 +1,7 @@ 
-Davinci GPIO controller bindings
+Davinci/Keystone GPIO controller bindings
 
 Required Properties:
-- compatible: should be "ti,dm6441-gpio"
+- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
 
 - reg: Physical base address of the controller and the size of memory mapped
        registers.
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 73f65ca..3e44e0c 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -413,6 +413,27 @@  static const struct irq_domain_ops davinci_gpio_irq_ops = {
 	.xlate = irq_domain_xlate_onetwocell,
 };
 
+static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq)
+{
+	static struct irq_chip_type gpio_unbanked;
+
+	gpio_unbanked = *container_of(irq_get_chip(irq),
+				      struct irq_chip_type, chip);
+
+	return &gpio_unbanked.chip;
+};
+
+static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq)
+{
+	static struct irq_chip gpio_unbanked;
+
+	gpio_unbanked = *irq_get_chip(irq);
+	pr_err("keystone_gpio_get_irq_chip\n");
+	return &gpio_unbanked;
+};
+
+static const struct of_device_id davinci_gpio_ids[];
+
 /*
  * NOTE:  for suspend/resume, probably best to make a platform_device with
  * suspend_late/resume_resume calls hooking into results of the set_wake()
@@ -433,6 +454,15 @@  static int davinci_gpio_irq_setup(struct platform_device *pdev)
 	struct davinci_gpio_platform_data *pdata = dev->platform_data;
 	struct davinci_gpio_regs __iomem *g;
 	struct irq_domain	*irq_domain = NULL;
+	const struct of_device_id *match;
+	struct irq_chip *irq_chip;
+	struct irq_chip *(*gpio_get_irq_chip)(unsigned int irq);
+
+	gpio_get_irq_chip = davinci_gpio_get_irq_chip;
+	match = of_match_device(of_match_ptr(davinci_gpio_ids),
+				dev);
+	if (match)
+		gpio_get_irq_chip = match->data;
 
 	ngpio = pdata->ngpio;
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -442,7 +472,6 @@  static int davinci_gpio_irq_setup(struct platform_device *pdev)
 	}
 
 	bank_irq = res->start;
-
 	if (!bank_irq) {
 		dev_err(dev, "Invalid IRQ resource\n");
 		return -ENODEV;
@@ -484,25 +513,22 @@  static int davinci_gpio_irq_setup(struct platform_device *pdev)
 	}
 
 	/*
-	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * INTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
 	 * controller only handling trigger modes.  We currently assume no
 	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
 	 */
 	if (pdata->gpio_unbanked) {
-		static struct irq_chip_type gpio_unbanked;
-
 		/* pass "bank 0" GPIO IRQs to AINTC */
 		chips[0].chip.to_irq = gpio_to_irq_unbanked;
 		chips[0].gpio_irq = bank_irq;
 		chips[0].gpio_unbanked = pdata->gpio_unbanked;
 		binten = BIT(0);
 
-		/* AINTC handles mask/unmask; GPIO handles triggering */
+		/* INTC handles mask/unmask; GPIO handles triggering */
 		irq = bank_irq;
-		gpio_unbanked = *container_of(irq_get_chip(irq),
-					      struct irq_chip_type, chip);
-		gpio_unbanked.chip.name = "GPIO-AINTC";
-		gpio_unbanked.chip.irq_set_type = gpio_irq_type_unbanked;
+		irq_chip = gpio_get_irq_chip(irq);
+		irq_chip->name = "GPIO-AINTC";
+		irq_chip->irq_set_type = gpio_irq_type_unbanked;
 
 		/* default trigger: both edges */
 		g = gpio2regs(0);
@@ -511,7 +537,7 @@  static int davinci_gpio_irq_setup(struct platform_device *pdev)
 
 		/* set the direct IRQs up to use that irqchip */
 		for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) {
-			irq_set_chip(irq, &gpio_unbanked.chip);
+			irq_set_chip(irq, irq_chip);
 			irq_set_handler_data(irq, &chips[gpio / 32]);
 			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
 		}
@@ -554,7 +580,8 @@  done:
 
 #if IS_ENABLED(CONFIG_OF)
 static const struct of_device_id davinci_gpio_ids[] = {
-	{ .compatible = "ti,dm6441-gpio", },
+	{ .compatible = "ti,keystone-gpio", keystone_gpio_get_irq_chip},
+	{ .compatible = "ti,dm6441-gpio", davinci_gpio_get_irq_chip},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, davinci_gpio_ids);