| Message ID | 1386626150-23504-1-git-send-email-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/09/2013 03:55 PM, Nishanth Menon wrote: > Craneboard is a hardware development platform based on the Sitara > AM3517 ARM Cortex - A8 microprocessor device - see [1] for more > details. Add basic devices for craneboard as replacement for the board > file scheduled for removal as part of device tree conversion > > [1] http://craneboard.org > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- gentle ping.. had'nt seen a response on this patch. Could we queue this up for v3.14-rc1? > Based on: > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git > branch: omap-for-v3.14/omap3-board-removal 736e812 ARM: OMAP2+: Remove unused platform init code and headers > > Bootlog: http://pastebin.mozilla.org/3744412 > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/am3517-craneboard.dts | 174 +++++++++++++++++++++++++++++++ > 2 files changed, 175 insertions(+) > create mode 100644 arch/arm/boot/dts/am3517-craneboard.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index fc37bca..ad155fc 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ > am335x-boneblack.dtb \ > am335x-nano.dtb \ > am335x-base0033.dtb \ > + am3517-craneboard.dtb \ > am3517-evm.dtb \ > am3517_mt_ventoux.dtb \ > am43x-epos-evm.dtb \ > diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts > new file mode 100644 > index 0000000..2d40b3f > --- /dev/null > +++ b/arch/arm/boot/dts/am3517-craneboard.dts > @@ -0,0 +1,174 @@ > +/* > + * See craneboard.org for more details > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +/dts-v1/; > + > +#include "am3517.dtsi" > + > +/ { > + model = "TI AM3517 CraneBoard (TMDSEVM3517)"; > + compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; > + > + memory { > + device_type = "memory"; > + reg = <0x80000000 0x10000000>; /* 256 MB */ > + }; > + > + vbat: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "vbat"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-boot-on; > + }; > +}; > + > +&davinci_emac { > + status = "okay"; > +}; > + > +&davinci_mdio { > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <2600000>; > + > + tps: tps@2d { > + reg = <0x2d>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +&i2c3 { > + clock-frequency = <400000>; > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +&mmc1 { > + vmmc-supply = <&vdd2_reg>; > + bus-width = <8>; > +}; > + > +&mmc2 { > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +&mmc3 { > + /* goes to expansion connector */ > + status = "disabled"; > +}; > + > +#include "tps65910.dtsi" > + > +&omap3_pmx_core { > + tps_pins: pinmux_tps_pins { > + pinctrl-single,pins = < > + 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */ > + >; > + }; > +}; > + > +&tps { > + pinctrl-names = "default"; > + pinctrl-0 = <&tps_pins>; > + > + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ > + interrupt-parent = <&intc>; > + > + ti,en-ck32k-xtal; > + > + vcc1-supply = <&vbat>; > + vcc2-supply = <&vbat>; > + vcc3-supply = <&vbat>; > + vcc4-supply = <&vbat>; > + vcc5-supply = <&vbat>; > + vcc6-supply = <&vbat>; > + vcc7-supply = <&vbat>; > + vccio-supply = <&vbat>; > + > + regulators { > + vrtc_reg: regulator@0 { > + regulator-always-on; > + }; > + > + vio_reg: regulator@1 { > + regulator-always-on; > + }; > + > + /* > + * Unused: > + * VDIG1=2.7V,300mA max > + * VDIG2=1.8V,300mA max > + */ > + > + vpll_reg: regulator@7 { > + /* VDDS_DPLL_1V8 */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vaux1_reg: regulator@9 { > + /* VDDS_SRAM_1V8 */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vaux2_reg: regulator@10 { > + /* VDDA1P8V_USBPHY */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + /* VAUX33 unused */ > + > + vdac_reg: regulator@8 { > + /* VDDA_DAC_1V8 */ > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vmmc_reg: regulator@12 { > + /* VDDA3P3V_USBPHY */ > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdd1_reg: regulator@2 { > + /* VDD_CORE */ > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vdd2_reg: regulator@3 { > + /* VDDSHV_3V3 */ > + regulator-name = "vdd_shv"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + /* VDD3 unused */ > + }; > +}; >
Hi Nishanth, On 17/12/2013 20:45, Nishanth Menon wrote: > On 12/09/2013 03:55 PM, Nishanth Menon wrote: >> Craneboard is a hardware development platform based on the Sitara >> AM3517 ARM Cortex - A8 microprocessor device - see [1] for more >> details. Add basic devices for craneboard as replacement for the board >> file scheduled for removal as part of device tree conversion >> >> [1] http://craneboard.org >> >> Signed-off-by: Nishanth Menon <nm@ti.com> >> --- > > gentle ping.. had'nt seen a response on this patch. Could we queue > this up for v3.14-rc1? Yep, it looks good to me. But if you don't mind I'll start pushing my branch after Xmas :-). Thanks, Benoit >> Based on: >> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git >> branch: omap-for-v3.14/omap3-board-removal 736e812 ARM: OMAP2+: Remove unused platform init code and headers >> >> Bootlog: http://pastebin.mozilla.org/3744412 >> >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/am3517-craneboard.dts | 174 +++++++++++++++++++++++++++++++ >> 2 files changed, 175 insertions(+) >> create mode 100644 arch/arm/boot/dts/am3517-craneboard.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index fc37bca..ad155fc 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ >> am335x-boneblack.dtb \ >> am335x-nano.dtb \ >> am335x-base0033.dtb \ >> + am3517-craneboard.dtb \ >> am3517-evm.dtb \ >> am3517_mt_ventoux.dtb \ >> am43x-epos-evm.dtb \ >> diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts >> new file mode 100644 >> index 0000000..2d40b3f >> --- /dev/null >> +++ b/arch/arm/boot/dts/am3517-craneboard.dts >> @@ -0,0 +1,174 @@ >> +/* >> + * See craneboard.org for more details >> + * >> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> +/dts-v1/; >> + >> +#include "am3517.dtsi" >> + >> +/ { >> + model = "TI AM3517 CraneBoard (TMDSEVM3517)"; >> + compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; >> + >> + memory { >> + device_type = "memory"; >> + reg = <0x80000000 0x10000000>; /* 256 MB */ >> + }; >> + >> + vbat: fixedregulator@0 { >> + compatible = "regulator-fixed"; >> + regulator-name = "vbat"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-boot-on; >> + }; >> +}; >> + >> +&davinci_emac { >> + status = "okay"; >> +}; >> + >> +&davinci_mdio { >> + status = "okay"; >> +}; >> + >> +&i2c1 { >> + clock-frequency = <2600000>; >> + >> + tps: tps@2d { >> + reg = <0x2d>; >> + }; >> +}; >> + >> +&i2c2 { >> + clock-frequency = <400000>; >> + /* goes to expansion connector */ >> + status = "disabled"; >> +}; >> + >> +&i2c3 { >> + clock-frequency = <400000>; >> + /* goes to expansion connector */ >> + status = "disabled"; >> +}; >> + >> +&mmc1 { >> + vmmc-supply = <&vdd2_reg>; >> + bus-width = <8>; >> +}; >> + >> +&mmc2 { >> + /* goes to expansion connector */ >> + status = "disabled"; >> +}; >> + >> +&mmc3 { >> + /* goes to expansion connector */ >> + status = "disabled"; >> +}; >> + >> +#include "tps65910.dtsi" >> + >> +&omap3_pmx_core { >> + tps_pins: pinmux_tps_pins { >> + pinctrl-single,pins = < >> + 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */ >> + >; >> + }; >> +}; >> + >> +&tps { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&tps_pins>; >> + >> + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ >> + interrupt-parent = <&intc>; >> + >> + ti,en-ck32k-xtal; >> + >> + vcc1-supply = <&vbat>; >> + vcc2-supply = <&vbat>; >> + vcc3-supply = <&vbat>; >> + vcc4-supply = <&vbat>; >> + vcc5-supply = <&vbat>; >> + vcc6-supply = <&vbat>; >> + vcc7-supply = <&vbat>; >> + vccio-supply = <&vbat>; >> + >> + regulators { >> + vrtc_reg: regulator@0 { >> + regulator-always-on; >> + }; >> + >> + vio_reg: regulator@1 { >> + regulator-always-on; >> + }; >> + >> + /* >> + * Unused: >> + * VDIG1=2.7V,300mA max >> + * VDIG2=1.8V,300mA max >> + */ >> + >> + vpll_reg: regulator@7 { >> + /* VDDS_DPLL_1V8 */ >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + vaux1_reg: regulator@9 { >> + /* VDDS_SRAM_1V8 */ >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + vaux2_reg: regulator@10 { >> + /* VDDA1P8V_USBPHY */ >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + /* VAUX33 unused */ >> + >> + vdac_reg: regulator@8 { >> + /* VDDA_DAC_1V8 */ >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + vmmc_reg: regulator@12 { >> + /* VDDA3P3V_USBPHY */ >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + vdd1_reg: regulator@2 { >> + /* VDD_CORE */ >> + regulator-name = "vdd_core"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-boot-on; >> + regulator-always-on; >> + }; >> + >> + vdd2_reg: regulator@3 { >> + /* VDDSHV_3V3 */ >> + regulator-name = "vdd_shv"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + /* VDD3 unused */ >> + }; >> +}; >> > >
On 12/18/2013 10:57 AM, Benoit Cousson wrote: > On 17/12/2013 20:45, Nishanth Menon wrote: >> On 12/09/2013 03:55 PM, Nishanth Menon wrote: >>> Craneboard is a hardware development platform based on the Sitara >>> AM3517 ARM Cortex - A8 microprocessor device - see [1] for more >>> details. Add basic devices for craneboard as replacement for the board >>> file scheduled for removal as part of device tree conversion >>> >>> [1] http://craneboard.org >>> >>> Signed-off-by: Nishanth Menon <nm@ti.com> >>> --- >> >> gentle ping.. had'nt seen a response on this patch. Could we queue >> this up for v3.14-rc1? > > Yep, it looks good to me. Thanks benoit. > But if you don't mind I'll start pushing my branch after Xmas :-). As long as Tony is ok with it, I have no issues either - will be great to have dt only boot in .14-rc1 though. Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 18/12/2013 18:02, Nishanth Menon wrote: > On 12/18/2013 10:57 AM, Benoit Cousson wrote: >> On 17/12/2013 20:45, Nishanth Menon wrote: >>> On 12/09/2013 03:55 PM, Nishanth Menon wrote: >>>> Craneboard is a hardware development platform based on the Sitara >>>> AM3517 ARM Cortex - A8 microprocessor device - see [1] for more >>>> details. Add basic devices for craneboard as replacement for the board >>>> file scheduled for removal as part of device tree conversion >>>> >>>> [1] http://craneboard.org >>>> >>>> Signed-off-by: Nishanth Menon <nm@ti.com> >>>> --- >>> >>> gentle ping.. had'nt seen a response on this patch. Could we queue >>> this up for v3.14-rc1? >> >> Yep, it looks good to me. > Thanks benoit. > >> But if you don't mind I'll start pushing my branch after Xmas :-). > > As long as Tony is ok with it, I have no issues either - will be great > to have dt only boot in .14-rc1 though. Good point, it is already -rc4. OK, I'll just queued it and pushed it to for_3.14/dts. Regards, Benoit
Benoit, On 12/18/2013 11:16 AM, Benoit Cousson wrote: > On 18/12/2013 18:02, Nishanth Menon wrote: >> On 12/18/2013 10:57 AM, Benoit Cousson wrote: >>> On 17/12/2013 20:45, Nishanth Menon wrote: >>>> On 12/09/2013 03:55 PM, Nishanth Menon wrote: >>>>> Craneboard is a hardware development platform based on the Sitara >>>>> AM3517 ARM Cortex - A8 microprocessor device - see [1] for more >>>>> details. Add basic devices for craneboard as replacement for the board >>>>> file scheduled for removal as part of device tree conversion >>>>> >>>>> [1] http://craneboard.org >>>>> >>>>> Signed-off-by: Nishanth Menon <nm@ti.com> >>>>> --- >>>> >>>> gentle ping.. had'nt seen a response on this patch. Could we queue >>>> this up for v3.14-rc1? >>> >>> Yep, it looks good to me. >> Thanks benoit. >> >>> But if you don't mind I'll start pushing my branch after Xmas :-). >> >> As long as Tony is ok with it, I have no issues either - will be great >> to have dt only boot in .14-rc1 though. > > Good point, it is already -rc4. > > OK, I'll just queued it and pushed it to for_3.14/dts. I dont see this in next-20140120 yet - wondering if Tony or you have plans for one of .14 rcs OR if this is queued for .15.
On 01/20/2014 10:43 AM, Nishanth Menon wrote: > Benoit, > > On 12/18/2013 11:16 AM, Benoit Cousson wrote: >> On 18/12/2013 18:02, Nishanth Menon wrote: >>> On 12/18/2013 10:57 AM, Benoit Cousson wrote: >>>> On 17/12/2013 20:45, Nishanth Menon wrote: >>>>> On 12/09/2013 03:55 PM, Nishanth Menon wrote: >>>>>> Craneboard is a hardware development platform based on the Sitara >>>>>> AM3517 ARM Cortex - A8 microprocessor device - see [1] for more >>>>>> details. Add basic devices for craneboard as replacement for the board >>>>>> file scheduled for removal as part of device tree conversion >>>>>> >>>>>> [1] http://craneboard.org >>>>>> >>>>>> Signed-off-by: Nishanth Menon <nm@ti.com> >>>>>> --- >>>>> >>>>> gentle ping.. had'nt seen a response on this patch. Could we queue >>>>> this up for v3.14-rc1? >>>> >>>> Yep, it looks good to me. >>> Thanks benoit. >>> >>>> But if you don't mind I'll start pushing my branch after Xmas :-). >>> >>> As long as Tony is ok with it, I have no issues either - will be great >>> to have dt only boot in .14-rc1 though. >> >> Good point, it is already -rc4. >> >> OK, I'll just queued it and pushed it to for_3.14/dts. > > I dont see this in next-20140120 yet - wondering if Tony or you have > plans for one of .14 rcs OR if this is queued for .15. gentle ping yet again :(
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index fc37bca..ad155fc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-boneblack.dtb \ am335x-nano.dtb \ am335x-base0033.dtb \ + am3517-craneboard.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ am43x-epos-evm.dtb \ diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts new file mode 100644 index 0000000..2d40b3f --- /dev/null +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -0,0 +1,174 @@ +/* + * See craneboard.org for more details + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am3517.dtsi" + +/ { + model = "TI AM3517 CraneBoard (TMDSEVM3517)"; + compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&davinci_emac { + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <2600000>; + + tps: tps@2d { + reg = <0x2d>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + /* goes to expansion connector */ + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <400000>; + /* goes to expansion connector */ + status = "disabled"; +}; + +&mmc1 { + vmmc-supply = <&vdd2_reg>; + bus-width = <8>; +}; + +&mmc2 { + /* goes to expansion connector */ + status = "disabled"; +}; + +&mmc3 { + /* goes to expansion connector */ + status = "disabled"; +}; + +#include "tps65910.dtsi" + +&omap3_pmx_core { + tps_pins: pinmux_tps_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */ + >; + }; +}; + +&tps { + pinctrl-names = "default"; + pinctrl-0 = <&tps_pins>; + + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + ti,en-ck32k-xtal; + + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + /* + * Unused: + * VDIG1=2.7V,300mA max + * VDIG2=1.8V,300mA max + */ + + vpll_reg: regulator@7 { + /* VDDS_DPLL_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + /* VDDS_SRAM_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + /* VDDA1P8V_USBPHY */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* VAUX33 unused */ + + vdac_reg: regulator@8 { + /* VDDA_DAC_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + /* VDDA3P3V_USBPHY */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_CORE */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDDSHV_3V3 */ + regulator-name = "vdd_shv"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* VDD3 unused */ + }; +};
Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device - see [1] for more details. Add basic devices for craneboard as replacement for the board file scheduled for removal as part of device tree conversion [1] http://craneboard.org Signed-off-by: Nishanth Menon <nm@ti.com> --- Based on: git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git branch: omap-for-v3.14/omap3-board-removal 736e812 ARM: OMAP2+: Remove unused platform init code and headers Bootlog: http://pastebin.mozilla.org/3744412 arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am3517-craneboard.dts | 174 +++++++++++++++++++++++++++++++ 2 files changed, 175 insertions(+) create mode 100644 arch/arm/boot/dts/am3517-craneboard.dts