@@ -6,6 +6,9 @@
"samsung,exynos4412-tmu"
"samsung,exynos4210-tmu"
"samsung,exynos5250-tmu"
+ "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
+ "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
+ Exynos5420 (Must pass triminfo base and triminfo clock)
"samsung,exynos5440-tmu"
- interrupt-parent : The phandle for the interrupt controller
- reg : Address range of the thermal registers. For soc's which has multiple
@@ -13,9 +16,24 @@
interrupt related then 2 set of register has to supplied. First set
belongs to register set of TMU instance and second set belongs to
registers shared with the TMU instance.
+
+ NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
+ channels 2, 3 and 4
+ Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced
+ register, also provide clock to access that base.
+
+ TRIMINFO at 0x1006c000 contains data for TMU channel 3
+ TRIMINFO at 0x100a0000 contains data for TMU channel 4
+ TRIMINFO at 0x10068000 contains data for TMU channel 2
+
- interrupts : Should contain interrupt for thermal system
-- clocks : The main clock for TMU device
+- clocks : The main clocks for TMU device
+ -- 1. operational clock for TMU channel
+ -- 2. optional clock to access the shared registers of TMU channel
- clock-names : Thermal system clock name
+ -- "tmu_apbif" operational clock for current TMU channel
+ -- "tmu_triminfo_apbif" clock to access the shared triminfo register
+ for current TMU channel
- vtmu-supply: This entry is optional and provides the regulator node supplying
voltage to TMU. If needed this entry can be placed inside
board/platform specific dts file.
@@ -43,6 +61,31 @@ Example 2):
clock-names = "tmu_apbif";
};
+Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
+ tmu_cpu2: tmu@10068000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+ interrupts = <0 184 0>;
+ clocks = <&clock 318>, <&clock 318>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ };
+
+ tmu_cpu3: tmu@1006c000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+ interrupts = <0 185 0>;
+ clocks = <&clock 318>, <&clock 319>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ };
+
+ tmu_gpu: tmu@100a0000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+ interrupts = <0 215 0>;
+ clocks = <&clock 319>, <&clock 318>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ };
+
Note: For multi-instance tmu each instance should have an alias correctly
numbered in "aliases" node.
@@ -47,6 +47,7 @@
* @irq_work: pointer to the irq work structure.
* @lock: lock to implement synchronization.
* @clk: pointer to the clock structure.
+ * @clk_sec: pointer to the clock structure for accessing the base_second.
* @temp_error1: fused value of the first point trim.
* @temp_error2: fused value of the second point trim.
* @regulator: pointer to the TMU regulator structure.
@@ -61,7 +62,7 @@ struct exynos_tmu_data {
enum soc_type soc;
struct work_struct irq_work;
struct mutex lock;
- struct clk *clk;
+ struct clk *clk, *clk_sec;
u8 temp_error1, temp_error2;
struct regulator *regulator;
struct thermal_sensor_conf *reg_conf;
@@ -152,6 +153,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
mutex_lock(&data->lock);
clk_enable(data->clk);
+ if (!IS_ERR(data->clk_sec))
+ clk_enable(data->clk_sec);
if (TMU_SUPPORTS(pdata, READY_STATUS)) {
status = readb(data->base + reg->tmu_status);
@@ -186,7 +189,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
}
} else {
- trim_info = readl(data->base + reg->triminfo_data);
+ /* On exynos5420 the triminfo register is in the shared space */
+ if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
+ trim_info = readl(data->base_second +
+ reg->triminfo_data);
+ else
+ trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
@@ -301,6 +309,8 @@ skip_calib_data:
out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
+ if (!IS_ERR(data->clk_sec))
+ clk_disable(data->clk_sec);
return ret;
}
@@ -452,12 +462,16 @@ static void exynos_tmu_work(struct work_struct *work)
const struct exynos_tmu_registers *reg = pdata->registers;
unsigned int val_irq, val_type;
+ if (!IS_ERR(data->clk_sec))
+ clk_enable(data->clk_sec);
/* Find which sensor generated this interrupt */
if (reg->tmu_irqstatus) {
val_type = readl(data->base_second + reg->tmu_irqstatus);
if (!((val_type >> data->id) & 0x1))
goto out;
}
+ if (!IS_ERR(data->clk_sec))
+ clk_disable(data->clk_sec);
exynos_report_trigger(data->reg_conf);
mutex_lock(&data->lock);
@@ -498,6 +512,14 @@ static const struct of_device_id exynos_tmu_match[] = {
.data = (void *)EXYNOS5250_TMU_DRV_DATA,
},
{
+ .compatible = "samsung,exynos5420-tmu",
+ .data = (void *)EXYNOS5420_TMU_DRV_DATA,
+ },
+ {
+ .compatible = "samsung,exynos5420-tmu-ext-triminfo",
+ .data = (void *)EXYNOS5420_TMU_DRV_DATA,
+ },
+ {
.compatible = "samsung,exynos5440-tmu",
.data = (void *)EXYNOS5440_TMU_DRV_DATA,
},
@@ -628,13 +650,30 @@ static int exynos_tmu_probe(struct platform_device *pdev)
return PTR_ERR(data->clk);
}
+ data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
+ if (IS_ERR(data->clk_sec)) {
+ if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
+ dev_err(&pdev->dev, "Failed to get triminfo clock\n");
+ return PTR_ERR(data->clk_sec);
+ }
+ } else {
+ ret = clk_prepare(data->clk_sec);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ return ret;
+ }
+ }
+
ret = clk_prepare(data->clk);
- if (ret)
- return ret;
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ goto err_clk_sec;
+ }
if (pdata->type == SOC_ARCH_EXYNOS4210 ||
pdata->type == SOC_ARCH_EXYNOS4412 ||
pdata->type == SOC_ARCH_EXYNOS5250 ||
+ pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
pdata->type == SOC_ARCH_EXYNOS5440)
data->soc = pdata->type;
else {
@@ -703,6 +742,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
return 0;
err_clk:
clk_unprepare(data->clk);
+err_clk_sec:
+ if (!IS_ERR(data->clk_sec))
+ clk_unprepare(data->clk_sec);
return ret;
}
@@ -715,6 +757,8 @@ static int exynos_tmu_remove(struct platform_device *pdev)
exynos_unregister_thermal(data->reg_conf);
clk_unprepare(data->clk);
+ if (!IS_ERR(data->clk_sec))
+ clk_unprepare(data->clk_sec);
if (!IS_ERR(data->regulator))
regulator_disable(data->regulator);
@@ -43,6 +43,7 @@ enum soc_type {
SOC_ARCH_EXYNOS4210 = 1,
SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
+ SOC_ARCH_EXYNOS5420_TRIMINFO,
SOC_ARCH_EXYNOS5440,
};
@@ -194,6 +194,105 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
};
#endif
+#if defined(CONFIG_SOC_EXYNOS5420)
+static const struct exynos_tmu_registers exynos5420_tmu_registers = {
+ .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+ .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+ .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+ .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+ .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+ .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+ .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+ .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+ .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+ .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+ .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+ .tmu_status = EXYNOS_TMU_REG_STATUS,
+ .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+ .threshold_th0 = EXYNOS_THD_TEMP_RISE,
+ .threshold_th1 = EXYNOS_THD_TEMP_FALL,
+ .tmu_inten = EXYNOS_TMU_REG_INTEN,
+ .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+ .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+ .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+ /* INTEN_RISE3 Not availble in exynos5420 */
+ .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+ .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+ .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
+ .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+ .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
+ .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+ .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+ .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
+ .emul_con = EXYNOS_EMUL_CON,
+ .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+ .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
+ .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
+};
+
+#define __EXYNOS5420_TMU_DATA \
+ .threshold_falling = 10, \
+ .trigger_levels[0] = 85, \
+ .trigger_levels[1] = 103, \
+ .trigger_levels[2] = 110, \
+ .trigger_levels[3] = 120, \
+ .trigger_enable[0] = true, \
+ .trigger_enable[1] = true, \
+ .trigger_enable[2] = true, \
+ .trigger_enable[3] = false, \
+ .trigger_type[0] = THROTTLE_ACTIVE, \
+ .trigger_type[1] = THROTTLE_ACTIVE, \
+ .trigger_type[2] = SW_TRIP, \
+ .trigger_type[3] = HW_TRIP, \
+ .max_trigger_level = 4, \
+ .gain = 8, \
+ .reference_voltage = 16, \
+ .noise_cancel_mode = 4, \
+ .cal_type = TYPE_ONE_POINT_TRIMMING, \
+ .efuse_value = 55, \
+ .min_efuse_value = 40, \
+ .max_efuse_value = 100, \
+ .first_point_trim = 25, \
+ .second_point_trim = 85, \
+ .default_temp_offset = 50, \
+ .freq_tab[0] = { \
+ .freq_clip_max = 800 * 1000, \
+ .temp_level = 85, \
+ }, \
+ .freq_tab[1] = { \
+ .freq_clip_max = 200 * 1000, \
+ .temp_level = 103, \
+ }, \
+ .freq_tab_count = 2, \
+ .registers = &exynos5420_tmu_registers, \
+
+#define EXYNOS5420_TMU_DATA \
+ __EXYNOS5420_TMU_DATA \
+ .type = SOC_ARCH_EXYNOS5250, \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+ TMU_SUPPORT_EMUL_TIME)
+
+#define EXYNOS5420_TMU_DATA_SHARED \
+ __EXYNOS5420_TMU_DATA \
+ .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+ TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
+
+struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
+ .tmu_data = {
+ { EXYNOS5420_TMU_DATA },
+ { EXYNOS5420_TMU_DATA },
+ { EXYNOS5420_TMU_DATA_SHARED },
+ { EXYNOS5420_TMU_DATA_SHARED },
+ { EXYNOS5420_TMU_DATA_SHARED },
+ },
+ .tmu_count = 5,
+};
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
@@ -72,6 +72,7 @@
#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
+#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16
#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
@@ -156,6 +157,13 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
#define EXYNOS5250_TMU_DRV_DATA (NULL)
#endif
+#if defined(CONFIG_SOC_EXYNOS5420)
+extern struct exynos_tmu_init_data const exynos5420_default_tmu_data;
+#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data)
+#else
+#define EXYNOS5420_TMU_DRV_DATA (NULL)
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5440)
extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)