| Message ID | 1386066445-28245-3-git-send-email-r.sricharan@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Tue, Dec 03, 2013 at 03:57:23PM +0530, Sricharan R wrote: > +static const struct of_device_id crossbar_match[] __initconst = { > + { .compatible = "ti,irq-crossbar" }, > + {} > +}; > + > +int irqcrossbar_init(void) > +{ > + struct device_node *np; > + np = of_find_matching_node(NULL, crossbar_match); > + if (!np) > + return -ENODEV; > + > + crossbar_of_init(np); > + return 0; > +} instead, please use IRQCHIP_DECLARE() then you won't need to expose this symbol to be used by arch/arm/ code.
Hi Felipe, On Friday 27 December 2013 01:31 AM, Felipe Balbi wrote: > Hi, > > On Tue, Dec 03, 2013 at 03:57:23PM +0530, Sricharan R wrote: >> +static const struct of_device_id crossbar_match[] __initconst = { >> + { .compatible = "ti,irq-crossbar" }, >> + {} >> +}; >> + >> +int irqcrossbar_init(void) >> +{ >> + struct device_node *np; >> + np = of_find_matching_node(NULL, crossbar_match); >> + if (!np) >> + return -ENODEV; >> + >> + crossbar_of_init(np); >> + return 0; >> +} > > instead, please use IRQCHIP_DECLARE() then you won't need to expose this > symbol to be used by arch/arm/ code. > Crossbar node does not have a "interrupt-controller" property and not a regular Interrupt controller. This was added in here after all below discussions https://lkml.org/lkml/2013/9/18/540 So IRQCHIP_DECLARE() macro cannot be used here. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Thomas, On Tuesday 03 December 2013 03:57 PM, Sricharan R wrote: > Some socs have a large number of interrupts requests to service > the needs of its many peripherals and subsystems. All of the > interrupt lines from the subsystems are not needed at the same > time, so they have to be muxed to the irq-controller appropriately. > In such places a interrupt controllers are preceded by an CROSSBAR > that provides flexibility in muxing the device requests to the controller > inputs. > > This driver takes care a allocating a free irq and then configuring the > crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should > be called right before the irqchip_init, so that it is setup to handle the > irqchip callbacks. > > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Tony Lindgren <tony@atomide.com> > Cc: Rajendra Nayak <rnayak@ti.com> > Cc: Marc Zyngier <marc.zyngier@arm.com> > Cc: Grant Likely <grant.likely@linaro.org> > Cc: Rob Herring <rob.herring@calxeda.com> > Signed-off-by: Sricharan R <r.sricharan@ti.com> > Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) > Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > Acked-by: Linus Walleij <linus.walleij@linaro.org> > --- > [v5] Used the function of_property_read_u32_index instead of raw reading > from DT as per comments from Mark Rutland <mark.rutland@arm.com> > > .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++ > drivers/irqchip/Kconfig | 8 + > drivers/irqchip/Makefile | 1 + > drivers/irqchip/irq-crossbar.c | 208 ++++++++++++++++++++ > include/linux/irqchip/irq-crossbar.h | 11 ++ > 5 files changed, 255 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt > create mode 100644 drivers/irqchip/irq-crossbar.c > create mode 100644 include/linux/irqchip/irq-crossbar.h > > diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt > new file mode 100644 > index 0000000..fb88585 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt > @@ -0,0 +1,27 @@ > +Some socs have a large number of interrupts requests to service > +the needs of its many peripherals and subsystems. All of the > +interrupt lines from the subsystems are not needed at the same > +time, so they have to be muxed to the irq-controller appropriately. > +In such places a interrupt controllers are preceded by an CROSSBAR > +that provides flexibility in muxing the device requests to the controller > +inputs. > + > +Required properties: > +- compatible : Should be "ti,irq-crossbar" > +- reg: Base address and the size of the crossbar registers. > +- ti,max-irqs: Total number of irqs available at the interrupt controller. > +- ti,reg-size: Size of a individual register in bytes. Every individual > + register is assumed to be of same size. Valid sizes are 1, 2, 4. > +- ti,irqs-reserved: List of the reserved irq lines that are not muxed using > + crossbar. These interrupt lines are reserved in the soc, > + so crossbar bar driver should not consider them as free > + lines. > + > +Examples: > + crossbar_mpu: @4a020000 { > + compatible = "ti,irq-crossbar"; > + reg = <0x4a002a48 0x130>; > + ti,max-irqs = <160>; > + ti,reg-size = <2>; > + ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; > + }; > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > index 3792a1a..2efcde6 100644 > --- a/drivers/irqchip/Kconfig > +++ b/drivers/irqchip/Kconfig > @@ -61,3 +61,11 @@ config VERSATILE_FPGA_IRQ_NR > int > default 4 > depends on VERSATILE_FPGA_IRQ > + > +config IRQ_CROSSBAR > + bool > + help > + Support for a CROSSBAR ip that preceeds the main interrupt controller. > + The primary irqchip invokes the crossbar's callback which inturn allocates > + a free irq and configures the IP. Thus the peripheral interrupts are > + routed to one of the free irqchip interrupt lines. > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > index c60b901..2edead9 100644 > --- a/drivers/irqchip/Makefile > +++ b/drivers/irqchip/Makefile > @@ -22,3 +22,4 @@ obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o > obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o > obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o > obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o > +obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o > diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c > new file mode 100644 > index 0000000..ae605a3 > --- /dev/null > +++ b/drivers/irqchip/irq-crossbar.c > @@ -0,0 +1,208 @@ > +/* > + * drivers/irqchip/irq-crossbar.c > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com > + * Author: Sricharan R <r.sricharan@ti.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > +#include <linux/slab.h> > +#include <linux/irqchip/arm-gic.h> > + > +#define IRQ_FREE -1 > +#define GIC_IRQ_START 32 > + > +/* > + * @int_max: maximum number of supported interrupts > + * @irq_map: array of interrupts to crossbar number mapping > + * @crossbar_base: crossbar base address > + * @register_offsets: offsets for each irq number > + */ > +struct crossbar_device { > + uint int_max; > + uint *irq_map; > + void __iomem *crossbar_base; > + int *register_offsets; > + void (*write) (int, int); > +}; > + > +static struct crossbar_device *cb; > + > +static inline void crossbar_writel(int irq_no, int cb_no) > +{ > + writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); > +} > + > +static inline void crossbar_writew(int irq_no, int cb_no) > +{ > + writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); > +} > + > +static inline void crossbar_writeb(int irq_no, int cb_no) > +{ > + writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); > +} > + > +static inline int allocate_free_irq(int cb_no) > +{ > + int i; > + > + for (i = 0; i < cb->int_max; i++) { > + if (cb->irq_map[i] == IRQ_FREE) { > + cb->irq_map[i] = cb_no; > + return i; > + } > + } > + > + return -ENODEV; > +} > + > +static int crossbar_domain_map(struct irq_domain *d, unsigned int irq, > + irq_hw_number_t hw) > +{ > + cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]); > + return 0; > +} > + > +static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq) > +{ > + irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq; > + > + if (hw > GIC_IRQ_START) > + cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE; > +} > + > +static int crossbar_domain_xlate(struct irq_domain *d, > + struct device_node *controller, > + const u32 *intspec, unsigned int intsize, > + unsigned long *out_hwirq, > + unsigned int *out_type) > +{ > + unsigned long ret; > + > + ret = allocate_free_irq(intspec[1]); > + > + if (IS_ERR_VALUE(ret)) > + return ret; > + > + *out_hwirq = ret + GIC_IRQ_START; > + return 0; > +} > + > +const struct irq_domain_ops routable_irq_domain_ops = { > + .map = crossbar_domain_map, > + .unmap = crossbar_domain_unmap, > + .xlate = crossbar_domain_xlate > +}; > + > +static int __init crossbar_of_init(struct device_node *node) > +{ > + int i, size, max, reserved = 0, entry; > + const __be32 *irqsr; > + > + cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL); > + > + if (!cb) > + return -ENOMEM; > + > + cb->crossbar_base = of_iomap(node, 0); > + if (!cb->crossbar_base) > + goto err1; > + > + of_property_read_u32(node, "ti,max-irqs", &max); > + cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL); > + if (!cb->irq_map) > + goto err2; > + > + cb->int_max = max; > + > + for (i = 0; i < max; i++) > + cb->irq_map[i] = IRQ_FREE; > + > + /* Get and mark reserved irqs */ > + irqsr = of_get_property(node, "ti,irqs-reserved", &size); > + if (irqsr) { > + size /= sizeof(__be32); > + > + for (i = 0; i < size; i++) { > + of_property_read_u32_index(node, > + "ti,irqs-reserved", > + i, &entry); > + if (entry > max) { > + pr_err("Invalid reserved entry\n"); > + goto err3; > + } > + cb->irq_map[entry] = 0; > + } > + } > + > + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); > + if (!cb->register_offsets) > + goto err3; > + > + of_property_read_u32(node, "ti,reg-size", &size); > + > + switch (size) { > + case 1: > + cb->write = crossbar_writeb; > + break; > + case 2: > + cb->write = crossbar_writew; > + break; > + case 4: > + cb->write = crossbar_writel; > + break; > + default: > + pr_err("Invalid reg-size property\n"); > + goto err4; > + break; > + } > + > + /* > + * Register offsets are not linear because of the > + * reserved irqs. so find and store the offsets once. > + */ > + for (i = 0; i < max; i++) { > + if (!cb->irq_map[i]) > + continue; > + > + cb->register_offsets[i] = reserved; > + reserved += size; > + } > + > + register_routable_domain_ops(&routable_irq_domain_ops); > + return 0; > + > +err4: > + kfree(cb->register_offsets); > +err3: > + kfree(cb->irq_map); > +err2: > + iounmap(cb->crossbar_base); > +err1: > + kfree(cb); > + return -ENOMEM; > +} > + > +static const struct of_device_id crossbar_match[] __initconst = { > + { .compatible = "ti,irq-crossbar" }, > + {} > +}; > + > +int irqcrossbar_init(void) > +{ > + struct device_node *np; > + np = of_find_matching_node(NULL, crossbar_match); > + if (!np) > + return -ENODEV; > + > + crossbar_of_init(np); > + return 0; > +} > diff --git a/include/linux/irqchip/irq-crossbar.h b/include/linux/irqchip/irq-crossbar.h > new file mode 100644 > index 0000000..e5537b8 > --- /dev/null > +++ b/include/linux/irqchip/irq-crossbar.h > @@ -0,0 +1,11 @@ > +/* > + * drivers/irqchip/irq-crossbar.h > + * > + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > +int irqcrossbar_init(void); I already have your reviewed-by tag for the first patch in this series. Kevin was pointing out that irqchip maintainer tag is needed for this patch as well to be merged. We are planning to take this series through arm-soc tree. Can i please have your tag for this patch as well ? Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Thomas, On Thursday 16 January 2014 03:52 PM, Sricharan R wrote: > Hi Thomas, > > On Tuesday 03 December 2013 03:57 PM, Sricharan R wrote: >> Some socs have a large number of interrupts requests to service >> the needs of its many peripherals and subsystems. All of the >> interrupt lines from the subsystems are not needed at the same >> time, so they have to be muxed to the irq-controller appropriately. >> In such places a interrupt controllers are preceded by an CROSSBAR >> that provides flexibility in muxing the device requests to the controller >> inputs. >> >> This driver takes care a allocating a free irq and then configuring the >> crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should >> be called right before the irqchip_init, so that it is setup to handle the >> irqchip callbacks. >> >> Cc: Thomas Gleixner <tglx@linutronix.de> >> Cc: Linus Walleij <linus.walleij@linaro.org> >> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Cc: Russell King <linux@arm.linux.org.uk> >> Cc: Tony Lindgren <tony@atomide.com> >> Cc: Rajendra Nayak <rnayak@ti.com> >> Cc: Marc Zyngier <marc.zyngier@arm.com> >> Cc: Grant Likely <grant.likely@linaro.org> >> Cc: Rob Herring <rob.herring@calxeda.com> >> Signed-off-by: Sricharan R <r.sricharan@ti.com> >> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) >> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Acked-by: Linus Walleij <linus.walleij@linaro.org> >> --- >> [v5] Used the function of_property_read_u32_index instead of raw reading >> from DT as per comments from Mark Rutland <mark.rutland@arm.com> >> >> .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++ >> drivers/irqchip/Kconfig | 8 + >> drivers/irqchip/Makefile | 1 + >> drivers/irqchip/irq-crossbar.c | 208 ++++++++++++++++++++ >> include/linux/irqchip/irq-crossbar.h | 11 ++ >> 5 files changed, 255 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt >> create mode 100644 drivers/irqchip/irq-crossbar.c >> create mode 100644 include/linux/irqchip/irq-crossbar.h >> >> diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt >> new file mode 100644 >> index 0000000..fb88585 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt >> @@ -0,0 +1,27 @@ >> +Some socs have a large number of interrupts requests to service >> +the needs of its many peripherals and subsystems. All of the >> +interrupt lines from the subsystems are not needed at the same >> +time, so they have to be muxed to the irq-controller appropriately. >> +In such places a interrupt controllers are preceded by an CROSSBAR >> +that provides flexibility in muxing the device requests to the controller >> +inputs. >> + >> +Required properties: >> +- compatible : Should be "ti,irq-crossbar" >> +- reg: Base address and the size of the crossbar registers. >> +- ti,max-irqs: Total number of irqs available at the interrupt controller. >> +- ti,reg-size: Size of a individual register in bytes. Every individual >> + register is assumed to be of same size. Valid sizes are 1, 2, 4. >> +- ti,irqs-reserved: List of the reserved irq lines that are not muxed using >> + crossbar. These interrupt lines are reserved in the soc, >> + so crossbar bar driver should not consider them as free >> + lines. >> + >> +Examples: >> + crossbar_mpu: @4a020000 { >> + compatible = "ti,irq-crossbar"; >> + reg = <0x4a002a48 0x130>; >> + ti,max-irqs = <160>; >> + ti,reg-size = <2>; >> + ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; >> + }; >> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig >> index 3792a1a..2efcde6 100644 >> --- a/drivers/irqchip/Kconfig >> +++ b/drivers/irqchip/Kconfig >> @@ -61,3 +61,11 @@ config VERSATILE_FPGA_IRQ_NR >> int >> default 4 >> depends on VERSATILE_FPGA_IRQ >> + >> +config IRQ_CROSSBAR >> + bool >> + help >> + Support for a CROSSBAR ip that preceeds the main interrupt controller. >> + The primary irqchip invokes the crossbar's callback which inturn allocates >> + a free irq and configures the IP. Thus the peripheral interrupts are >> + routed to one of the free irqchip interrupt lines. >> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile >> index c60b901..2edead9 100644 >> --- a/drivers/irqchip/Makefile >> +++ b/drivers/irqchip/Makefile >> @@ -22,3 +22,4 @@ obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o >> obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o >> obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o >> obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o >> +obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o >> diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c >> new file mode 100644 >> index 0000000..ae605a3 >> --- /dev/null >> +++ b/drivers/irqchip/irq-crossbar.c >> @@ -0,0 +1,208 @@ >> +/* >> + * drivers/irqchip/irq-crossbar.c >> + * >> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com >> + * Author: Sricharan R <r.sricharan@ti.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + */ >> +#include <linux/err.h> >> +#include <linux/io.h> >> +#include <linux/of_address.h> >> +#include <linux/of_irq.h> >> +#include <linux/slab.h> >> +#include <linux/irqchip/arm-gic.h> >> + >> +#define IRQ_FREE -1 >> +#define GIC_IRQ_START 32 >> + >> +/* >> + * @int_max: maximum number of supported interrupts >> + * @irq_map: array of interrupts to crossbar number mapping >> + * @crossbar_base: crossbar base address >> + * @register_offsets: offsets for each irq number >> + */ >> +struct crossbar_device { >> + uint int_max; >> + uint *irq_map; >> + void __iomem *crossbar_base; >> + int *register_offsets; >> + void (*write) (int, int); >> +}; >> + >> +static struct crossbar_device *cb; >> + >> +static inline void crossbar_writel(int irq_no, int cb_no) >> +{ >> + writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); >> +} >> + >> +static inline void crossbar_writew(int irq_no, int cb_no) >> +{ >> + writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); >> +} >> + >> +static inline void crossbar_writeb(int irq_no, int cb_no) >> +{ >> + writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); >> +} >> + >> +static inline int allocate_free_irq(int cb_no) >> +{ >> + int i; >> + >> + for (i = 0; i < cb->int_max; i++) { >> + if (cb->irq_map[i] == IRQ_FREE) { >> + cb->irq_map[i] = cb_no; >> + return i; >> + } >> + } >> + >> + return -ENODEV; >> +} >> + >> +static int crossbar_domain_map(struct irq_domain *d, unsigned int irq, >> + irq_hw_number_t hw) >> +{ >> + cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]); >> + return 0; >> +} >> + >> +static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq) >> +{ >> + irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq; >> + >> + if (hw > GIC_IRQ_START) >> + cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE; >> +} >> + >> +static int crossbar_domain_xlate(struct irq_domain *d, >> + struct device_node *controller, >> + const u32 *intspec, unsigned int intsize, >> + unsigned long *out_hwirq, >> + unsigned int *out_type) >> +{ >> + unsigned long ret; >> + >> + ret = allocate_free_irq(intspec[1]); >> + >> + if (IS_ERR_VALUE(ret)) >> + return ret; >> + >> + *out_hwirq = ret + GIC_IRQ_START; >> + return 0; >> +} >> + >> +const struct irq_domain_ops routable_irq_domain_ops = { >> + .map = crossbar_domain_map, >> + .unmap = crossbar_domain_unmap, >> + .xlate = crossbar_domain_xlate >> +}; >> + >> +static int __init crossbar_of_init(struct device_node *node) >> +{ >> + int i, size, max, reserved = 0, entry; >> + const __be32 *irqsr; >> + >> + cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL); >> + >> + if (!cb) >> + return -ENOMEM; >> + >> + cb->crossbar_base = of_iomap(node, 0); >> + if (!cb->crossbar_base) >> + goto err1; >> + >> + of_property_read_u32(node, "ti,max-irqs", &max); >> + cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL); >> + if (!cb->irq_map) >> + goto err2; >> + >> + cb->int_max = max; >> + >> + for (i = 0; i < max; i++) >> + cb->irq_map[i] = IRQ_FREE; >> + >> + /* Get and mark reserved irqs */ >> + irqsr = of_get_property(node, "ti,irqs-reserved", &size); >> + if (irqsr) { >> + size /= sizeof(__be32); >> + >> + for (i = 0; i < size; i++) { >> + of_property_read_u32_index(node, >> + "ti,irqs-reserved", >> + i, &entry); >> + if (entry > max) { >> + pr_err("Invalid reserved entry\n"); >> + goto err3; >> + } >> + cb->irq_map[entry] = 0; >> + } >> + } >> + >> + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); >> + if (!cb->register_offsets) >> + goto err3; >> + >> + of_property_read_u32(node, "ti,reg-size", &size); >> + >> + switch (size) { >> + case 1: >> + cb->write = crossbar_writeb; >> + break; >> + case 2: >> + cb->write = crossbar_writew; >> + break; >> + case 4: >> + cb->write = crossbar_writel; >> + break; >> + default: >> + pr_err("Invalid reg-size property\n"); >> + goto err4; >> + break; >> + } >> + >> + /* >> + * Register offsets are not linear because of the >> + * reserved irqs. so find and store the offsets once. >> + */ >> + for (i = 0; i < max; i++) { >> + if (!cb->irq_map[i]) >> + continue; >> + >> + cb->register_offsets[i] = reserved; >> + reserved += size; >> + } >> + >> + register_routable_domain_ops(&routable_irq_domain_ops); >> + return 0; >> + >> +err4: >> + kfree(cb->register_offsets); >> +err3: >> + kfree(cb->irq_map); >> +err2: >> + iounmap(cb->crossbar_base); >> +err1: >> + kfree(cb); >> + return -ENOMEM; >> +} >> + >> +static const struct of_device_id crossbar_match[] __initconst = { >> + { .compatible = "ti,irq-crossbar" }, >> + {} >> +}; >> + >> +int irqcrossbar_init(void) >> +{ >> + struct device_node *np; >> + np = of_find_matching_node(NULL, crossbar_match); >> + if (!np) >> + return -ENODEV; >> + >> + crossbar_of_init(np); >> + return 0; >> +} >> diff --git a/include/linux/irqchip/irq-crossbar.h b/include/linux/irqchip/irq-crossbar.h >> new file mode 100644 >> index 0000000..e5537b8 >> --- /dev/null >> +++ b/include/linux/irqchip/irq-crossbar.h >> @@ -0,0 +1,11 @@ >> +/* >> + * drivers/irqchip/irq-crossbar.h >> + * >> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + */ >> +int irqcrossbar_init(void); > > I already have your reviewed-by tag for the first patch in this series. > > Kevin was pointing out that irqchip maintainer tag is needed for this patch as well > to be merged. We are planning to take this series through arm-soc tree. > > Can i please have your tag for this patch as well ? > Ping.. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 3 Feb 2014, Sricharan R wrote: > > I already have your reviewed-by tag for the first patch in this series. > > > > Kevin was pointing out that irqchip maintainer tag is needed for this patch as well > > to be merged. We are planning to take this series through arm-soc tree. > > > > Can i please have your tag for this patch as well ? Acked-by-me -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday 04 February 2014 09:44 PM, Thomas Gleixner wrote: > On Mon, 3 Feb 2014, Sricharan R wrote: >>> I already have your reviewed-by tag for the first patch in this series. >>> >>> Kevin was pointing out that irqchip maintainer tag is needed for this patch as well >>> to be merged. We are planning to take this series through arm-soc tree. >>> >>> Can i please have your tag for this patch as well ? > > Acked-by-me > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Thanks Thomas. Kevin, I will re-send a branch based on rc1 for this. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony, On Wednesday 05 February 2014 06:41 PM, Sricharan R wrote: > On Tuesday 04 February 2014 09:44 PM, Thomas Gleixner wrote: >> On Mon, 3 Feb 2014, Sricharan R wrote: >>>> I already have your reviewed-by tag for the first patch in this series. >>>> >>>> Kevin was pointing out that irqchip maintainer tag is needed for this patch as well >>>> to be merged. We are planning to take this series through arm-soc tree. >>>> >>>> Can i please have your tag for this patch as well ? >> >> Acked-by-me >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > Thanks Thomas. > > Kevin, > I will re-send a branch based on rc1 for this. > I have pushed a branch based on mainline, git://github.com/Sricharanti/sricharan.git branch: crossbar_3.14_rc1 Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On Wednesday 05 February 2014 07:41 PM, Sricharan R wrote: > Tony, > > On Wednesday 05 February 2014 06:41 PM, Sricharan R wrote: >> On Tuesday 04 February 2014 09:44 PM, Thomas Gleixner wrote: >>> On Mon, 3 Feb 2014, Sricharan R wrote: >>>>> I already have your reviewed-by tag for the first patch in this series. >>>>> >>>>> Kevin was pointing out that irqchip maintainer tag is needed for this patch as well >>>>> to be merged. We are planning to take this series through arm-soc tree. >>>>> >>>>> Can i please have your tag for this patch as well ? >>> >>> Acked-by-me >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> Thanks Thomas. >> >> Kevin, >> I will re-send a branch based on rc1 for this. >> > > I have pushed a branch based on mainline, > git://github.com/Sricharanti/sricharan.git > branch: crossbar_3.14_rc1 > Ping on this.. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Sricharan R <r.sricharan@ti.com> [140205 06:13]: > Tony, > > On Wednesday 05 February 2014 06:41 PM, Sricharan R wrote: > > On Tuesday 04 February 2014 09:44 PM, Thomas Gleixner wrote: > >> On Mon, 3 Feb 2014, Sricharan R wrote: > >>>> I already have your reviewed-by tag for the first patch in this series. > >>>> > >>>> Kevin was pointing out that irqchip maintainer tag is needed for this patch as well > >>>> to be merged. We are planning to take this series through arm-soc tree. > >>>> > >>>> Can i please have your tag for this patch as well ? > >> > >> Acked-by-me > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > Thanks Thomas. > > > > Kevin, > > I will re-send a branch based on rc1 for this. > > > > I have pushed a branch based on mainline, > git://github.com/Sricharanti/sricharan.git > branch: crossbar_3.14_rc1 OK pulling into omap-for-v3.15/crossbar thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt new file mode 100644 index 0000000..fb88585 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -0,0 +1,27 @@ +Some socs have a large number of interrupts requests to service +the needs of its many peripherals and subsystems. All of the +interrupt lines from the subsystems are not needed at the same +time, so they have to be muxed to the irq-controller appropriately. +In such places a interrupt controllers are preceded by an CROSSBAR +that provides flexibility in muxing the device requests to the controller +inputs. + +Required properties: +- compatible : Should be "ti,irq-crossbar" +- reg: Base address and the size of the crossbar registers. +- ti,max-irqs: Total number of irqs available at the interrupt controller. +- ti,reg-size: Size of a individual register in bytes. Every individual + register is assumed to be of same size. Valid sizes are 1, 2, 4. +- ti,irqs-reserved: List of the reserved irq lines that are not muxed using + crossbar. These interrupt lines are reserved in the soc, + so crossbar bar driver should not consider them as free + lines. + +Examples: + crossbar_mpu: @4a020000 { + compatible = "ti,irq-crossbar"; + reg = <0x4a002a48 0x130>; + ti,max-irqs = <160>; + ti,reg-size = <2>; + ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + }; diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 3792a1a..2efcde6 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -61,3 +61,11 @@ config VERSATILE_FPGA_IRQ_NR int default 4 depends on VERSATILE_FPGA_IRQ + +config IRQ_CROSSBAR + bool + help + Support for a CROSSBAR ip that preceeds the main interrupt controller. + The primary irqchip invokes the crossbar's callback which inturn allocates + a free irq and configures the IP. Thus the peripheral interrupts are + routed to one of the free irqchip interrupt lines. diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index c60b901..2edead9 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o +obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c new file mode 100644 index 0000000..ae605a3 --- /dev/null +++ b/drivers/irqchip/irq-crossbar.c @@ -0,0 +1,208 @@ +/* + * drivers/irqchip/irq-crossbar.c + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * Author: Sricharan R <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/irqchip/arm-gic.h> + +#define IRQ_FREE -1 +#define GIC_IRQ_START 32 + +/* + * @int_max: maximum number of supported interrupts + * @irq_map: array of interrupts to crossbar number mapping + * @crossbar_base: crossbar base address + * @register_offsets: offsets for each irq number + */ +struct crossbar_device { + uint int_max; + uint *irq_map; + void __iomem *crossbar_base; + int *register_offsets; + void (*write) (int, int); +}; + +static struct crossbar_device *cb; + +static inline void crossbar_writel(int irq_no, int cb_no) +{ + writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); +} + +static inline void crossbar_writew(int irq_no, int cb_no) +{ + writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); +} + +static inline void crossbar_writeb(int irq_no, int cb_no) +{ + writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]); +} + +static inline int allocate_free_irq(int cb_no) +{ + int i; + + for (i = 0; i < cb->int_max; i++) { + if (cb->irq_map[i] == IRQ_FREE) { + cb->irq_map[i] = cb_no; + return i; + } + } + + return -ENODEV; +} + +static int crossbar_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]); + return 0; +} + +static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq; + + if (hw > GIC_IRQ_START) + cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE; +} + +static int crossbar_domain_xlate(struct irq_domain *d, + struct device_node *controller, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + unsigned long ret; + + ret = allocate_free_irq(intspec[1]); + + if (IS_ERR_VALUE(ret)) + return ret; + + *out_hwirq = ret + GIC_IRQ_START; + return 0; +} + +const struct irq_domain_ops routable_irq_domain_ops = { + .map = crossbar_domain_map, + .unmap = crossbar_domain_unmap, + .xlate = crossbar_domain_xlate +}; + +static int __init crossbar_of_init(struct device_node *node) +{ + int i, size, max, reserved = 0, entry; + const __be32 *irqsr; + + cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL); + + if (!cb) + return -ENOMEM; + + cb->crossbar_base = of_iomap(node, 0); + if (!cb->crossbar_base) + goto err1; + + of_property_read_u32(node, "ti,max-irqs", &max); + cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL); + if (!cb->irq_map) + goto err2; + + cb->int_max = max; + + for (i = 0; i < max; i++) + cb->irq_map[i] = IRQ_FREE; + + /* Get and mark reserved irqs */ + irqsr = of_get_property(node, "ti,irqs-reserved", &size); + if (irqsr) { + size /= sizeof(__be32); + + for (i = 0; i < size; i++) { + of_property_read_u32_index(node, + "ti,irqs-reserved", + i, &entry); + if (entry > max) { + pr_err("Invalid reserved entry\n"); + goto err3; + } + cb->irq_map[entry] = 0; + } + } + + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); + if (!cb->register_offsets) + goto err3; + + of_property_read_u32(node, "ti,reg-size", &size); + + switch (size) { + case 1: + cb->write = crossbar_writeb; + break; + case 2: + cb->write = crossbar_writew; + break; + case 4: + cb->write = crossbar_writel; + break; + default: + pr_err("Invalid reg-size property\n"); + goto err4; + break; + } + + /* + * Register offsets are not linear because of the + * reserved irqs. so find and store the offsets once. + */ + for (i = 0; i < max; i++) { + if (!cb->irq_map[i]) + continue; + + cb->register_offsets[i] = reserved; + reserved += size; + } + + register_routable_domain_ops(&routable_irq_domain_ops); + return 0; + +err4: + kfree(cb->register_offsets); +err3: + kfree(cb->irq_map); +err2: + iounmap(cb->crossbar_base); +err1: + kfree(cb); + return -ENOMEM; +} + +static const struct of_device_id crossbar_match[] __initconst = { + { .compatible = "ti,irq-crossbar" }, + {} +}; + +int irqcrossbar_init(void) +{ + struct device_node *np; + np = of_find_matching_node(NULL, crossbar_match); + if (!np) + return -ENODEV; + + crossbar_of_init(np); + return 0; +} diff --git a/include/linux/irqchip/irq-crossbar.h b/include/linux/irqchip/irq-crossbar.h new file mode 100644 index 0000000..e5537b8 --- /dev/null +++ b/include/linux/irqchip/irq-crossbar.h @@ -0,0 +1,11 @@ +/* + * drivers/irqchip/irq-crossbar.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +int irqcrossbar_init(void);