| Message ID | 1386601737-8735-3-git-send-email-heikki.krogerus@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Monday 09 December 2013 08:38 PM, Heikki Krogerus wrote: > Removes the need for the consumer drivers requesting the > phys to provide name for the phy. This should ease the use > of the framework considerable when using only one phy, which > is usually the case when except with USB, but it can also > be useful with multiple phys. If index has to be used with multiple PHYs, the controller should be aware of the order in which it is populated in dt data. That's not good. > This will also reduce noise from the framework when there is > no phy by changing warnings to debug messages. > > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > drivers/phy/phy-core.c | 106 ++++++++++++++++++++++++++++++++++-------------- > include/linux/phy/phy.h | 14 +++++++ > 2 files changed, 89 insertions(+), 31 deletions(-) > > diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c > index 1102aef..99dc046 100644 > --- a/drivers/phy/phy-core.c > +++ b/drivers/phy/phy-core.c > @@ -53,7 +53,8 @@ static int devm_phy_match(struct device *dev, void *res, void *match_data) > return res == match_data; > } > > -static struct phy *phy_lookup(struct device *device, const char *con_id) > +static struct phy *phy_lookup(struct device *device, const char *con_id, > + unsigned int idx) > { > unsigned int count; > struct phy *phy; > @@ -67,6 +68,10 @@ static struct phy *phy_lookup(struct device *device, const char *con_id) > count = phy->init_data->num_consumers; > consumers = phy->init_data->consumers; > while (count--) { > + /* index must always match exactly */ > + if (!con_id) > + if (idx != count) > + continue; > if (!strcmp(consumers->dev_name, dev_name(device)) && > !strcmp(consumers->port, con_id)) { > class_dev_iter_exit(&iter); > @@ -242,7 +247,8 @@ EXPORT_SYMBOL_GPL(phy_power_off); > /** > * of_phy_get() - lookup and obtain a reference to a phy by phandle > * @dev: device that requests this phy > - * @index: the index of the phy > + * @con_id: name of the phy from device's point of view > + * @idx: the index of the phy if name is not used > * > * Returns the phy associated with the given phandle value, > * after getting a refcount to it or -ENODEV if there is no such phy or > @@ -250,12 +256,20 @@ EXPORT_SYMBOL_GPL(phy_power_off); > * not yet loaded. This function uses of_xlate call back function provided > * while registering the phy_provider to find the phy instance. > */ > -static struct phy *of_phy_get(struct device *dev, int index) > +static struct phy *of_phy_get(struct device *dev, const char *con_id, > + unsigned int idx) > { > int ret; > struct phy_provider *phy_provider; > struct phy *phy = NULL; > struct of_phandle_args args; > + int index; > + > + if (!con_id) > + index = idx; > + else > + index = of_property_match_string(dev->of_node, "phy-names", > + con_id); > > ret = of_parse_phandle_with_args(dev->of_node, "phys", "#phy-cells", > index, &args); > @@ -348,38 +362,36 @@ struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args > EXPORT_SYMBOL_GPL(of_phy_simple_xlate); > > /** > - * phy_get() - lookup and obtain a reference to a phy. > + * phy_get_index() - obtain a phy based on index NAK. It still takes a 'char' argument and the name is misleading. Btw are you replacing phy_get() or adding a new API in addition to phy_get()? > * @dev: device that requests this phy > * @con_id: name of the phy from device's point of view > + * @idx: index of the phy to obtain in the consumer > * > - * Returns the phy driver, after getting a refcount to it; or > - * -ENODEV if there is no such phy. The caller is responsible for > - * calling phy_put() to release that count. > + * This variant of phy_get() allows to access PHYs other than the first > + * defined one for functions that define several PHYs. > */ > -struct phy *phy_get(struct device *dev, const char *con_id) > +struct phy *phy_get_index(struct device *dev, const char *con_id, > + unsigned int idx) > { > - int index = 0; > struct phy *phy = NULL; > > - if (con_id == NULL) { > - dev_WARN(dev, "missing string\n"); > - return ERR_PTR(-EINVAL); > + if (dev->of_node) { > + dev_dbg(dev, "using device tree for PHY lookup\n"); > + phy = of_phy_get(dev, con_id, idx); > } > > - if (dev->of_node) { > - index = of_property_match_string(dev->of_node, "phy-names", > - con_id); > - phy = of_phy_get(dev, index); > - if (IS_ERR(phy)) { > - dev_err(dev, "unable to find phy\n"); > - return phy; > - } > - } else { > - phy = phy_lookup(dev, con_id); > - if (IS_ERR(phy)) { > - dev_err(dev, "unable to find phy\n"); > - return phy; > - } > + /** > + * Either we are not using DT, or their lookup did not return > + * a result. In that case, use platform lookup as a fallback. > + */ In a dt boot, if it has not returned a result how will platform lookup help since there wouldn't be be any board file in the case of dt boot (to populate PHY consumers). Maybe your later patch will handle that. > + if (!phy || IS_ERR(phy)) { > + dev_dbg(dev, "using lookup tables for PHY lookup"); > + phy = phy_lookup(dev, con_id, idx); > + } > + > + if (IS_ERR(phy)) { > + dev_dbg(dev, "unable to find phy\n"); > + return phy; > } > > if (!try_module_get(phy->ops->owner)) > @@ -389,18 +401,20 @@ struct phy *phy_get(struct device *dev, const char *con_id) > > return phy; > } > -EXPORT_SYMBOL_GPL(phy_get); > +EXPORT_SYMBOL_GPL(phy_get_index); > > /** > - * devm_phy_get() - lookup and obtain a reference to a phy. > + * devm_phy_get_index() - obtain a phy based on index I don't see the need of these 2 APIs. Thanks Kishon
Hi Kishon, On Mon, Dec 16, 2013 at 04:32:58PM +0530, Kishon Vijay Abraham I wrote: > On Monday 09 December 2013 08:38 PM, Heikki Krogerus wrote: > > Removes the need for the consumer drivers requesting the > > phys to provide name for the phy. This should ease the use > > of the framework considerable when using only one phy, which > > is usually the case when except with USB, but it can also > > be useful with multiple phys. > > If index has to be used with multiple PHYs, the controller should be aware of > the order in which it is populated in dt data. That's not good. The Idea is not to replace the name based lookup. Just to provide possibility for index based lookup. With ACPI, if we get the device entries for PHYs, the order will be fixed and we will not have any other reference to the phys. In case of USB, the first one should always be USB2 PHY and the second the USB3 PHY. > > This will also reduce noise from the framework when there is > > no phy by changing warnings to debug messages. > > > > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > > --- > > drivers/phy/phy-core.c | 106 ++++++++++++++++++++++++++++++++++-------------- > > include/linux/phy/phy.h | 14 +++++++ > > 2 files changed, 89 insertions(+), 31 deletions(-) > > > > diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c > > index 1102aef..99dc046 100644 > > --- a/drivers/phy/phy-core.c > > +++ b/drivers/phy/phy-core.c > > @@ -53,7 +53,8 @@ static int devm_phy_match(struct device *dev, void *res, void *match_data) > > return res == match_data; > > } > > > > -static struct phy *phy_lookup(struct device *device, const char *con_id) > > +static struct phy *phy_lookup(struct device *device, const char *con_id, > > + unsigned int idx) > > { > > unsigned int count; > > struct phy *phy; > > @@ -67,6 +68,10 @@ static struct phy *phy_lookup(struct device *device, const char *con_id) > > count = phy->init_data->num_consumers; > > consumers = phy->init_data->consumers; > > while (count--) { > > + /* index must always match exactly */ > > + if (!con_id) > > + if (idx != count) > > + continue; > > if (!strcmp(consumers->dev_name, dev_name(device)) && > > !strcmp(consumers->port, con_id)) { > > class_dev_iter_exit(&iter); > > @@ -242,7 +247,8 @@ EXPORT_SYMBOL_GPL(phy_power_off); > > /** > > * of_phy_get() - lookup and obtain a reference to a phy by phandle > > * @dev: device that requests this phy > > - * @index: the index of the phy > > + * @con_id: name of the phy from device's point of view > > + * @idx: the index of the phy if name is not used > > * > > * Returns the phy associated with the given phandle value, > > * after getting a refcount to it or -ENODEV if there is no such phy or > > @@ -250,12 +256,20 @@ EXPORT_SYMBOL_GPL(phy_power_off); > > * not yet loaded. This function uses of_xlate call back function provided > > * while registering the phy_provider to find the phy instance. > > */ > > -static struct phy *of_phy_get(struct device *dev, int index) > > +static struct phy *of_phy_get(struct device *dev, const char *con_id, > > + unsigned int idx) > > { > > int ret; > > struct phy_provider *phy_provider; > > struct phy *phy = NULL; > > struct of_phandle_args args; > > + int index; > > + > > + if (!con_id) > > + index = idx; > > + else > > + index = of_property_match_string(dev->of_node, "phy-names", > > + con_id); > > > > ret = of_parse_phandle_with_args(dev->of_node, "phys", "#phy-cells", > > index, &args); > > @@ -348,38 +362,36 @@ struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args > > EXPORT_SYMBOL_GPL(of_phy_simple_xlate); > > > > /** > > - * phy_get() - lookup and obtain a reference to a phy. > > + * phy_get_index() - obtain a phy based on index > > NAK. It still takes a 'char' argument and the name is misleading. > Btw are you replacing phy_get() or adding a new API in addition to phy_get()? Additional API. The phy_get() would in practice act as a wrapper after this. It could actually be just a #define macro in the include file. The function naming I just copied straight from gpiolib.c. I did not have the imagination for anything fancier. I would like to be able to use some function like phy_get_index() and be able to deliver it both the name and the index. With DT you guys will always be able to use the name (and the string will always supersede the index if we do it like this), but with ACPI, and possibly the platform lookup tables, the index can be used... phy2 = phy_get_index(dev, "usb2-phy", 0); phy3 = phy_get_index(dev, "usb3-phy", 1); > > * @dev: device that requests this phy > > * @con_id: name of the phy from device's point of view > > + * @idx: index of the phy to obtain in the consumer > > * > > - * Returns the phy driver, after getting a refcount to it; or > > - * -ENODEV if there is no such phy. The caller is responsible for > > - * calling phy_put() to release that count. > > + * This variant of phy_get() allows to access PHYs other than the first > > + * defined one for functions that define several PHYs. > > */ > > -struct phy *phy_get(struct device *dev, const char *con_id) > > +struct phy *phy_get_index(struct device *dev, const char *con_id, > > + unsigned int idx) > > { > > - int index = 0; > > struct phy *phy = NULL; > > > > - if (con_id == NULL) { > > - dev_WARN(dev, "missing string\n"); > > - return ERR_PTR(-EINVAL); > > + if (dev->of_node) { > > + dev_dbg(dev, "using device tree for PHY lookup\n"); > > + phy = of_phy_get(dev, con_id, idx); > > } > > > > - if (dev->of_node) { > > - index = of_property_match_string(dev->of_node, "phy-names", > > - con_id); > > - phy = of_phy_get(dev, index); > > - if (IS_ERR(phy)) { > > - dev_err(dev, "unable to find phy\n"); > > - return phy; > > - } > > - } else { > > - phy = phy_lookup(dev, con_id); > > - if (IS_ERR(phy)) { > > - dev_err(dev, "unable to find phy\n"); > > - return phy; > > - } > > + /** > > + * Either we are not using DT, or their lookup did not return > > + * a result. In that case, use platform lookup as a fallback. > > + */ > > In a dt boot, if it has not returned a result how will platform lookup help > since there wouldn't be be any board file in the case of dt boot (to populate > PHY consumers). Maybe your later patch will handle that. This is something that I copy pasted from gpiolib.c. It felt like a good idea to have possibility to create lookup tables even when the device has of_node. I don't have strong feelings about this, so we can drop it if you like. > > + if (!phy || IS_ERR(phy)) { > > + dev_dbg(dev, "using lookup tables for PHY lookup"); > > + phy = phy_lookup(dev, con_id, idx); > > + } > > + > > + if (IS_ERR(phy)) { > > + dev_dbg(dev, "unable to find phy\n"); > > + return phy; > > } > > > > if (!try_module_get(phy->ops->owner)) > > @@ -389,18 +401,20 @@ struct phy *phy_get(struct device *dev, const char *con_id) > > > > return phy; > > } > > -EXPORT_SYMBOL_GPL(phy_get); > > +EXPORT_SYMBOL_GPL(phy_get_index); > > > > /** > > - * devm_phy_get() - lookup and obtain a reference to a phy. > > + * devm_phy_get_index() - obtain a phy based on index > > I don't see the need of these 2 APIs. My goal is really just to prepare for ACPI with this one. I don't know if my commit message was not clear enough. Thanks,
Hi, On Monday 16 December 2013 08:02 PM, Heikki Krogerus wrote: > Hi Kishon, > > On Mon, Dec 16, 2013 at 04:32:58PM +0530, Kishon Vijay Abraham I wrote: >> On Monday 09 December 2013 08:38 PM, Heikki Krogerus wrote: >>> Removes the need for the consumer drivers requesting the >>> phys to provide name for the phy. This should ease the use >>> of the framework considerable when using only one phy, which >>> is usually the case when except with USB, but it can also >>> be useful with multiple phys. >> >> If index has to be used with multiple PHYs, the controller should be aware of >> the order in which it is populated in dt data. That's not good. > > The Idea is not to replace the name based lookup. Just to provide > possibility for index based lookup. > > With ACPI, if we get the device entries for PHYs, the order will be > fixed and we will not have any other reference to the phys. In case > of USB, the first one should always be USB2 PHY and the second the > USB3 PHY. > >>> This will also reduce noise from the framework when there is >>> no phy by changing warnings to debug messages. >>> >>> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> >>> --- >>> drivers/phy/phy-core.c | 106 ++++++++++++++++++++++++++++++++++-------------- >>> include/linux/phy/phy.h | 14 +++++++ >>> 2 files changed, 89 insertions(+), 31 deletions(-) >>> >>> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c >>> index 1102aef..99dc046 100644 >>> --- a/drivers/phy/phy-core.c >>> +++ b/drivers/phy/phy-core.c >>> @@ -53,7 +53,8 @@ static int devm_phy_match(struct device *dev, void *res, void *match_data) >>> return res == match_data; >>> } >>> >>> -static struct phy *phy_lookup(struct device *device, const char *con_id) >>> +static struct phy *phy_lookup(struct device *device, const char *con_id, >>> + unsigned int idx) >>> { >>> unsigned int count; >>> struct phy *phy; >>> @@ -67,6 +68,10 @@ static struct phy *phy_lookup(struct device *device, const char *con_id) >>> count = phy->init_data->num_consumers; >>> consumers = phy->init_data->consumers; >>> while (count--) { >>> + /* index must always match exactly */ >>> + if (!con_id) >>> + if (idx != count) >>> + continue; >>> if (!strcmp(consumers->dev_name, dev_name(device)) && >>> !strcmp(consumers->port, con_id)) { >>> class_dev_iter_exit(&iter); >>> @@ -242,7 +247,8 @@ EXPORT_SYMBOL_GPL(phy_power_off); >>> /** >>> * of_phy_get() - lookup and obtain a reference to a phy by phandle >>> * @dev: device that requests this phy >>> - * @index: the index of the phy >>> + * @con_id: name of the phy from device's point of view >>> + * @idx: the index of the phy if name is not used >>> * >>> * Returns the phy associated with the given phandle value, >>> * after getting a refcount to it or -ENODEV if there is no such phy or >>> @@ -250,12 +256,20 @@ EXPORT_SYMBOL_GPL(phy_power_off); >>> * not yet loaded. This function uses of_xlate call back function provided >>> * while registering the phy_provider to find the phy instance. >>> */ >>> -static struct phy *of_phy_get(struct device *dev, int index) >>> +static struct phy *of_phy_get(struct device *dev, const char *con_id, >>> + unsigned int idx) >>> { >>> int ret; >>> struct phy_provider *phy_provider; >>> struct phy *phy = NULL; >>> struct of_phandle_args args; >>> + int index; >>> + >>> + if (!con_id) >>> + index = idx; >>> + else >>> + index = of_property_match_string(dev->of_node, "phy-names", >>> + con_id); >>> >>> ret = of_parse_phandle_with_args(dev->of_node, "phys", "#phy-cells", >>> index, &args); >>> @@ -348,38 +362,36 @@ struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args >>> EXPORT_SYMBOL_GPL(of_phy_simple_xlate); >>> >>> /** >>> - * phy_get() - lookup and obtain a reference to a phy. >>> + * phy_get_index() - obtain a phy based on index >> >> NAK. It still takes a 'char' argument and the name is misleading. >> Btw are you replacing phy_get() or adding a new API in addition to phy_get()? > > Additional API. The phy_get() would in practice act as a wrapper after In this patch it looks like you've replaced phy_get(). > this. It could actually be just a #define macro in the include file. > The function naming I just copied straight from gpiolib.c. I did not > have the imagination for anything fancier. > > I would like to be able to use some function like phy_get_index() and > be able to deliver it both the name and the index. With DT you guys > will always be able to use the name (and the string will always > supersede the index if we do it like this), but with ACPI, and possibly > the platform lookup tables, the index can be used... I think in that case, we should drop the 'string' from phy_get_index since we have the other API to handle that? I don't know about ACPI, but is it not possible to use strings with ACPI? Thanks Kishon
Hi Kishon, And happy new year.. On Tue, Jan 07, 2014 at 07:10:36PM +0530, Kishon Vijay Abraham I wrote: > >>> /** > >>> - * phy_get() - lookup and obtain a reference to a phy. > >>> + * phy_get_index() - obtain a phy based on index > >> > >> NAK. It still takes a 'char' argument and the name is misleading. > >> Btw are you replacing phy_get() or adding a new API in addition to phy_get()? > > > > Additional API. The phy_get() would in practice act as a wrapper after > > In this patch it looks like you've replaced phy_get(). > > this. It could actually be just a #define macro in the include file. > > The function naming I just copied straight from gpiolib.c. I did not > > have the imagination for anything fancier. > > > > I would like to be able to use some function like phy_get_index() and > > be able to deliver it both the name and the index. With DT you guys > > will always be able to use the name (and the string will always > > supersede the index if we do it like this), but with ACPI, and possibly > > the platform lookup tables, the index can be used... > > I think in that case, we should drop the 'string' from phy_get_index since we > have the other API to handle that? I don't know about ACPI, but is it not > possible to use strings with ACPI? No unfortunately. We just have what the ACPI tables provide. The PHYs would be "child" device entries under the controller and we can only get handle to them based on the index. I think I'll skip this patch from this set. Let's wait until we have an actual ACPI DSDT describing some PHYs. Thanks,
Hi Heikki, On Tuesday 14 January 2014 07:53 PM, Heikki Krogerus wrote: > Hi Kishon, > > And happy new year.. Happy new year :-) > > On Tue, Jan 07, 2014 at 07:10:36PM +0530, Kishon Vijay Abraham I wrote: >>>>> /** >>>>> - * phy_get() - lookup and obtain a reference to a phy. >>>>> + * phy_get_index() - obtain a phy based on index >>>> >>>> NAK. It still takes a 'char' argument and the name is misleading. >>>> Btw are you replacing phy_get() or adding a new API in addition to phy_get()? >>> >>> Additional API. The phy_get() would in practice act as a wrapper after >> >> In this patch it looks like you've replaced phy_get(). >>> this. It could actually be just a #define macro in the include file. >>> The function naming I just copied straight from gpiolib.c. I did not >>> have the imagination for anything fancier. >>> >>> I would like to be able to use some function like phy_get_index() and >>> be able to deliver it both the name and the index. With DT you guys >>> will always be able to use the name (and the string will always >>> supersede the index if we do it like this), but with ACPI, and possibly >>> the platform lookup tables, the index can be used... >> >> I think in that case, we should drop the 'string' from phy_get_index since we >> have the other API to handle that? I don't know about ACPI, but is it not >> possible to use strings with ACPI? > > No unfortunately. We just have what the ACPI tables provide. The PHYs > would be "child" device entries under the controller and we can only > get handle to them based on the index. > > I think I'll skip this patch from this set. Let's wait until we have > an actual ACPI DSDT describing some PHYs. yeah.. sure. Cheers Kishon
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 1102aef..99dc046 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -53,7 +53,8 @@ static int devm_phy_match(struct device *dev, void *res, void *match_data) return res == match_data; } -static struct phy *phy_lookup(struct device *device, const char *con_id) +static struct phy *phy_lookup(struct device *device, const char *con_id, + unsigned int idx) { unsigned int count; struct phy *phy; @@ -67,6 +68,10 @@ static struct phy *phy_lookup(struct device *device, const char *con_id) count = phy->init_data->num_consumers; consumers = phy->init_data->consumers; while (count--) { + /* index must always match exactly */ + if (!con_id) + if (idx != count) + continue; if (!strcmp(consumers->dev_name, dev_name(device)) && !strcmp(consumers->port, con_id)) { class_dev_iter_exit(&iter); @@ -242,7 +247,8 @@ EXPORT_SYMBOL_GPL(phy_power_off); /** * of_phy_get() - lookup and obtain a reference to a phy by phandle * @dev: device that requests this phy - * @index: the index of the phy + * @con_id: name of the phy from device's point of view + * @idx: the index of the phy if name is not used * * Returns the phy associated with the given phandle value, * after getting a refcount to it or -ENODEV if there is no such phy or @@ -250,12 +256,20 @@ EXPORT_SYMBOL_GPL(phy_power_off); * not yet loaded. This function uses of_xlate call back function provided * while registering the phy_provider to find the phy instance. */ -static struct phy *of_phy_get(struct device *dev, int index) +static struct phy *of_phy_get(struct device *dev, const char *con_id, + unsigned int idx) { int ret; struct phy_provider *phy_provider; struct phy *phy = NULL; struct of_phandle_args args; + int index; + + if (!con_id) + index = idx; + else + index = of_property_match_string(dev->of_node, "phy-names", + con_id); ret = of_parse_phandle_with_args(dev->of_node, "phys", "#phy-cells", index, &args); @@ -348,38 +362,36 @@ struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args EXPORT_SYMBOL_GPL(of_phy_simple_xlate); /** - * phy_get() - lookup and obtain a reference to a phy. + * phy_get_index() - obtain a phy based on index * @dev: device that requests this phy * @con_id: name of the phy from device's point of view + * @idx: index of the phy to obtain in the consumer * - * Returns the phy driver, after getting a refcount to it; or - * -ENODEV if there is no such phy. The caller is responsible for - * calling phy_put() to release that count. + * This variant of phy_get() allows to access PHYs other than the first + * defined one for functions that define several PHYs. */ -struct phy *phy_get(struct device *dev, const char *con_id) +struct phy *phy_get_index(struct device *dev, const char *con_id, + unsigned int idx) { - int index = 0; struct phy *phy = NULL; - if (con_id == NULL) { - dev_WARN(dev, "missing string\n"); - return ERR_PTR(-EINVAL); + if (dev->of_node) { + dev_dbg(dev, "using device tree for PHY lookup\n"); + phy = of_phy_get(dev, con_id, idx); } - if (dev->of_node) { - index = of_property_match_string(dev->of_node, "phy-names", - con_id); - phy = of_phy_get(dev, index); - if (IS_ERR(phy)) { - dev_err(dev, "unable to find phy\n"); - return phy; - } - } else { - phy = phy_lookup(dev, con_id); - if (IS_ERR(phy)) { - dev_err(dev, "unable to find phy\n"); - return phy; - } + /** + * Either we are not using DT, or their lookup did not return + * a result. In that case, use platform lookup as a fallback. + */ + if (!phy || IS_ERR(phy)) { + dev_dbg(dev, "using lookup tables for PHY lookup"); + phy = phy_lookup(dev, con_id, idx); + } + + if (IS_ERR(phy)) { + dev_dbg(dev, "unable to find phy\n"); + return phy; } if (!try_module_get(phy->ops->owner)) @@ -389,18 +401,20 @@ struct phy *phy_get(struct device *dev, const char *con_id) return phy; } -EXPORT_SYMBOL_GPL(phy_get); +EXPORT_SYMBOL_GPL(phy_get_index); /** - * devm_phy_get() - lookup and obtain a reference to a phy. + * devm_phy_get_index() - obtain a phy based on index * @dev: device that requests this phy * @con_id: name of the phy from device's point of view + * @idx: index of the phy to obtain in the consumer * - * Gets the phy using phy_get(), and associates a device with it using + * Gets the phy using phy_get_index(), and associates a device with it using * devres. On driver detach, release function is invoked on the devres data, * then, devres data is freed. */ -struct phy *devm_phy_get(struct device *dev, const char *con_id) +struct phy *devm_phy_get_index(struct device *dev, const char *con_id, + unsigned int idx) { struct phy **ptr, *phy; @@ -408,7 +422,7 @@ struct phy *devm_phy_get(struct device *dev, const char *con_id) if (!ptr) return ERR_PTR(-ENOMEM); - phy = phy_get(dev, con_id); + phy = phy_get_index(dev, con_id, idx); if (!IS_ERR(phy)) { *ptr = phy; devres_add(dev, ptr); @@ -418,6 +432,36 @@ struct phy *devm_phy_get(struct device *dev, const char *con_id) return phy; } +EXPORT_SYMBOL_GPL(devm_phy_get_index); + +/** + * phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @con_id: name of the phy from device's point of view + * + * Returns the phy driver, after getting a refcount to it; or + * -ENODEV if there is no such phy. The caller is responsible for + * calling phy_put() to release that count. + */ +struct phy *phy_get(struct device *dev, const char *con_id) +{ + return phy_get_index(dev, con_id, 0); +} +EXPORT_SYMBOL_GPL(phy_get); + +/** + * devm_phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @con_id: name of the phy from device's point of view + * + * Gets the phy using phy_get_index(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct phy *devm_phy_get(struct device *dev, const char *con_id) +{ + return devm_phy_get_index(dev, con_id, 0); +} EXPORT_SYMBOL_GPL(devm_phy_get); /** diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index d67dcbf..43d1a23 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -127,6 +127,8 @@ int phy_init(struct phy *phy); int phy_exit(struct phy *phy); int phy_power_on(struct phy *phy); int phy_power_off(struct phy *phy); +struct phy *phy_get_index(struct device *, const char *, unsigned int); +struct phy *devm_phy_get_index(struct device *, const char *, unsigned int); struct phy *phy_get(struct device *dev, const char *con_id); struct phy *devm_phy_get(struct device *dev, const char *con_id); void phy_put(struct phy *phy); @@ -199,6 +201,18 @@ static inline int phy_power_off(struct phy *phy) return -ENOSYS; } +static inline struct phy *phy_get_index(struct device *dev, const char *id, + unsigned int idx) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct phy *devm_phy_get_index(struct device *dev, + const char *id, unsigned int idx) +{ + return ERR_PTR(-ENOSYS); +} + static inline struct phy *phy_get(struct device *dev, const char *con_id) { return ERR_PTR(-ENOSYS);
Removes the need for the consumer drivers requesting the phys to provide name for the phy. This should ease the use of the framework considerable when using only one phy, which is usually the case when except with USB, but it can also be useful with multiple phys. This will also reduce noise from the framework when there is no phy by changing warnings to debug messages. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> --- drivers/phy/phy-core.c | 106 ++++++++++++++++++++++++++++++++++-------------- include/linux/phy/phy.h | 14 +++++++ 2 files changed, 89 insertions(+), 31 deletions(-)