| Message ID | 1388987892-23733-9-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Mon, Jan 06, 2014 at 01:58:12PM +0800, Chen-Yu Tsai wrote: > The Cubietruck makes use of the first three i2c controllers found on the > Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on > the board headers, and i2c-2 is used for DDC on the VGA connector. This > patch enables them in the device tree. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> It's not really related to the rest of the patches, so I would have prefered it being send as a separate patch. Anyway, it's merged now :) Maxime
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8a1009d..f9dcb61 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -33,6 +33,24 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds {
The Cubietruck makes use of the first three i2c controllers found on the Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on the board headers, and i2c-2 is used for DDC on the VGA connector. This patch enables them in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)