| Message ID | 1389082438-2199-1-git-send-email-Li.Xiubo@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Xiubo, On Tue, Jan 07, 2014 at 04:13:57PM +0800, Xiubo Li wrote: > This adds devicetree node for VF610, and there are 8 channels > supported. > > Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> > Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Has the FTM PWM device tree bindings been accepted/merged? Please only send me DTS changes after that. Also when you send me the DTS changes, please base on imx/dt or for-next branch of my git tree below. git://git.linaro.org/people/shawnguo/linux-2.6.git Shawn > --- > > No changes since v7. > > > arch/arm/boot/dts/vf610.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi > index d31ce1b..6cce861 100644 > --- a/arch/arm/boot/dts/vf610.dtsi > +++ b/arch/arm/boot/dts/vf610.dtsi > @@ -152,6 +152,19 @@ > clock-names = "pit"; > }; > > + pwm0: pwm@40038000 { > + compatible = "fsl,vf610-ftm-pwm"; > + #pwm-cells = <3>; > + reg = <0x40038000 0x1000>; > + clock-names = "ftm_sys", "ftm_ext", > + "ftm_fix", "ftm_cnt_clk_en"; > + clocks = <&clks VF610_CLK_FTM0>, > + <&clks VF610_CLK_FTM0_EXT_SEL>, > + <&clks VF610_CLK_FTM0_FIX_SEL>, > + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; > + status = "disabled"; > + }; > + > wdog@4003e000 { > compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; > reg = <0x4003e000 0x1000>; > -- > 1.8.4 > >
> Has the FTM PWM device tree bindings been accepted/merged? Please only > send me DTS changes after that. Also when you send me the DTS changes, > please base on imx/dt or for-next branch of my git tree below. > > git://git.linaro.org/people/shawnguo/linux-2.6.git > Yes, I will resend these dt patches after the FTM driver has been merged bases on this tree. Thanks, Xiubo
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index d31ce1b..6cce861 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -152,6 +152,19 @@ clock-names = "pit"; }; + pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>;