| Message ID | 1387558125-3460-4-git-send-email-victor.kamensky@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Victor, On Fri, Dec 20, 2013 at 08:48:43AM -0800, Victor Kamensky wrote: > This patch fixes issue of reading and writing interesting line break. an issue with > ARM V7 registers values from/to user land. Existing code was designed to > work only in LE case. The existing code... 'LE case'? 'little-endian'? > > struct kvm_one_reg > ------------------ > > registers value passed through kvm_one_reg structure. It is used by registers value passed through? What are you trying to say? > KVM_SET_ONE_REG, KVM_GET_ONE_REG ioctls. Note by looking at structure by the KVM... the structure > itself we cannot tell what is size of register. Note that structure carries the size of the register > address of user memory, 'addr' where register should be read or written I'm a little confused as to the value of this Section of the commit text. I believe the ONE_REG interface is quite well documented already... > > Setting register (from user-land to kvm) > ---------------------------------------- > > kvm_arm_set_reg takes vcpu and pointer to struct kvm_one_reg which already > read from user space I think you could ditch this first sentence > > kvm_arm_set_reg calls set_core_reg or kvm_arm_coproc_set_reg nit: adding kvm_arm_set_reg() makes it clear that this is the function you're refering to, and not the ioctl as a concept. > > set_core_reg deals only with 4 bytes registers, it just reads 4 bytes from > user space and store it properly into vcpu->arch.regs stores > > kvm_arm_coproc_set_reg deals with registers of different size. At certain different sizes At a certain point > point code reaches phase where it retrieves description of register by id the description of a register > and it knows register size, which could be either 4 or 8 bytes. Kernel code s/could be/is/ Kernel code is ready? > is ready to read values from user space, but destination type may vary. It > could be pointer to 32 bit integer or it could be pointer to 64 bit > integer. And all possible permutation of size and destination pointer are permutations > possible. Depending on destination pointer type, 4 bytes or 8 bytes, two the destination pointer type > new helper functions are introduced - reg_from_user32 and reg_from_user64. > They are used instead of reg_from_user function which could work only in > LE case. which only worked in > > Size sizeof(*DstInt) Function used to read from user > 4 4 reg_from_user32 > 8 4 reg_from_user32 - read two registers > 4 8 reg_from_user64 - need special handling for BE > 8 8 reg_from_user64 > > Getting register (to user-land from kvm) > ---------------------------------------- > > Situation with reading registers is similar to writing. Integer pointer The situation > type of register to be copied could be 4 or 8 bytes. And size passed in The integer pointer pointer to be copied? Please clarify what you are referring to. > struct kvm_one_reg could be 4 or 8. And any permutation is possible. Any permutation of source pointer type and size is possible. > Depending on src pointer type, 4 bytes or 8 bytes, two new helper functions > are introduced - reg_from_user32 and reg_to_user64. They are used instead reg_to_user32? > of reg_to_user function, which could work only in LE case. the reg_to_user, which worked only for LE. > > Size sizeof(*SrcInt) Function used to write to user > 4 4 reg_to_user32 > 8 4 reg_to_user32 - writes two registers > 4 8 reg_to_user64 - need special handleing for BE > 8 8 reg_to_user64 I think it could be slightly more helpful to put a comment on the functions, like "Write to 32-bit user pointer" on reg_to_user32, but it's up to you. > > Note code does assume that it can only deals with 4 or 8 byte registers. Note: We only support register sizes of 4 or 8 bytes. > > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> I don't mean to hammer on your commit message with all my comments. I really do appreciate you taking the time to document your changes. However, with the level of detail you are providing in the commit, I think you have to be slightly more careful with the language, so that it doesn't end up being misleading instead of helpful. I think you could sum this up much shorter to simply say that core register handling is already endian-safe, but coprocessors and vfpregs use reg_to_user which is not endian-safe, and therefore needs changing. The motivation about the pointer types and register sizes being arbitrarily different is important though, so I appreciate you listing that. > --- > arch/arm/kvm/coproc.c | 94 +++++++++++++++++++++++++++++++++++++-------------- > 1 file changed, 69 insertions(+), 25 deletions(-) > > diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c > index 78c0885..64b2b94 100644 > --- a/arch/arm/kvm/coproc.c > +++ b/arch/arm/kvm/coproc.c > @@ -634,17 +634,61 @@ static struct coproc_reg invariant_cp15[] = { > { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, > }; > > -static int reg_from_user(void *val, const void __user *uaddr, u64 id) > +static int reg_from_user64(u64 *val, const void __user *uaddr, u64 id) > +{ > + unsigned long regsize = KVM_REG_SIZE(id); > + union { > + u32 word; > + u64 dword; > + } tmp = {0}; > + > + if (copy_from_user(&tmp, uaddr, regsize) != 0) > + return -EFAULT; > + > + switch (regsize) { > + case 4: > + *val = tmp.word; > + break; > + case 8: > + *val = tmp.dword; > + break; > + } > + return 0; > +} You stated in the commit message that any permutation of KVM_REG_SIZE(id) and sizeof(*val) is possible. So doesn't this totally mess up the the kernel if I pass a 32-bit pointer to reg_from_user64? Or is that not really the case and that's an exception to all of the permutations? Basically you KVM_REG_SIZE(id) and sizeof your destination pointer type should always match, but we abuse this slightly so far. I don't think you should cater to that, but just require callers to always provide a consistent size/type pair (you could also add a union you use as a parameter instead, or have two typed parameter) and simplify into a single function. The only special cases you now have to deal with are in: set_invariant_cp15(): declare two temp variables of u32 and u64 sizes get_invariant_cp15(): either have temporary values or change val in corproc_reg to be a union The current scheme is pretty hard to understand and to make sure we're not breaking anything... > + > +/* Note it may really copy two u32 registers */ > +static int reg_from_user32(u32 *val, const void __user *uaddr, u64 id) > { > - /* This Just Works because we are little endian. */ > if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0) > return -EFAULT; > return 0; > } > > -static int reg_to_user(void __user *uaddr, const void *val, u64 id) > +static int reg_to_user64(void __user *uaddr, const u64 *val, u64 id) > +{ > + unsigned long regsize = KVM_REG_SIZE(id); > + union { > + u32 word; > + u64 dword; > + } tmp; > + > + switch (regsize) { > + case 4: > + tmp.word = *val; > + break; > + case 8: > + tmp.dword = *val; > + break; > + } > + > + if (copy_to_user(uaddr, &tmp, regsize) != 0) > + return -EFAULT; > + return 0; > +} > + > +/* Note it may really copy two u32 registers */ > +static int reg_to_user32(void __user *uaddr, const u32 *val, u64 id) > { > - /* This Just Works because we are little endian. */ > if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0) > return -EFAULT; > return 0; > @@ -662,7 +706,7 @@ static int get_invariant_cp15(u64 id, void __user *uaddr) > if (!r) > return -ENOENT; > > - return reg_to_user(uaddr, &r->val, id); > + return reg_to_user64(uaddr, &r->val, id); > } > > static int set_invariant_cp15(u64 id, void __user *uaddr) > @@ -678,7 +722,7 @@ static int set_invariant_cp15(u64 id, void __user *uaddr) > if (!r) > return -ENOENT; > > - err = reg_from_user(&val, uaddr, id); > + err = reg_from_user64(&val, uaddr, id); > if (err) > return err; > > @@ -846,7 +890,7 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) > if (vfpid < num_fp_regs()) { > if (KVM_REG_SIZE(id) != 8) > return -ENOENT; > - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], > + return reg_to_user64(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], > id); > } > > @@ -856,22 +900,22 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) > > switch (vfpid) { > case KVM_REG_ARM_VFP_FPEXC: > - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id); > + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpexc, id); > case KVM_REG_ARM_VFP_FPSCR: > - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id); > + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpscr, id); > case KVM_REG_ARM_VFP_FPINST: > - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id); > + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpinst, id); > case KVM_REG_ARM_VFP_FPINST2: > - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); > + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); > case KVM_REG_ARM_VFP_MVFR0: > val = fmrx(MVFR0); > - return reg_to_user(uaddr, &val, id); > + return reg_to_user32(uaddr, &val, id); > case KVM_REG_ARM_VFP_MVFR1: > val = fmrx(MVFR1); > - return reg_to_user(uaddr, &val, id); > + return reg_to_user32(uaddr, &val, id); > case KVM_REG_ARM_VFP_FPSID: > val = fmrx(FPSID); > - return reg_to_user(uaddr, &val, id); > + return reg_to_user32(uaddr, &val, id); > default: > return -ENOENT; > } > @@ -890,8 +934,8 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) > if (vfpid < num_fp_regs()) { > if (KVM_REG_SIZE(id) != 8) > return -ENOENT; > - return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid], > - uaddr, id); > + return reg_from_user64(&vcpu->arch.vfp_guest.fpregs[vfpid], > + uaddr, id); > } > > /* FP control registers are all 32 bit. */ > @@ -900,28 +944,28 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) > > switch (vfpid) { > case KVM_REG_ARM_VFP_FPEXC: > - return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id); > + return reg_from_user32(&vcpu->arch.vfp_guest.fpexc, uaddr, id); > case KVM_REG_ARM_VFP_FPSCR: > - return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id); > + return reg_from_user32(&vcpu->arch.vfp_guest.fpscr, uaddr, id); > case KVM_REG_ARM_VFP_FPINST: > - return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id); > + return reg_from_user32(&vcpu->arch.vfp_guest.fpinst, uaddr, id); > case KVM_REG_ARM_VFP_FPINST2: > - return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); > + return reg_from_user32(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); > /* These are invariant. */ > case KVM_REG_ARM_VFP_MVFR0: > - if (reg_from_user(&val, uaddr, id)) > + if (reg_from_user32(&val, uaddr, id)) > return -EFAULT; > if (val != fmrx(MVFR0)) > return -EINVAL; > return 0; > case KVM_REG_ARM_VFP_MVFR1: > - if (reg_from_user(&val, uaddr, id)) > + if (reg_from_user32(&val, uaddr, id)) > return -EFAULT; > if (val != fmrx(MVFR1)) > return -EINVAL; > return 0; > case KVM_REG_ARM_VFP_FPSID: > - if (reg_from_user(&val, uaddr, id)) > + if (reg_from_user32(&val, uaddr, id)) > return -EFAULT; > if (val != fmrx(FPSID)) > return -EINVAL; > @@ -968,7 +1012,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) > return get_invariant_cp15(reg->id, uaddr); > > /* Note: copies two regs if size is 64 bit. */ > - return reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); > + return reg_to_user32(uaddr, &vcpu->arch.cp15[r->reg], reg->id); > } > > int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) > @@ -987,7 +1031,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) > return set_invariant_cp15(reg->id, uaddr); > > /* Note: copies two regs if size is 64 bit */ > - return reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); > + return reg_from_user32(&vcpu->arch.cp15[r->reg], uaddr, reg->id); > } > > static unsigned int num_demux_regs(void) > -- > 1.8.1.4 > Thanks,
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 78c0885..64b2b94 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -634,17 +634,61 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, }; -static int reg_from_user(void *val, const void __user *uaddr, u64 id) +static int reg_from_user64(u64 *val, const void __user *uaddr, u64 id) +{ + unsigned long regsize = KVM_REG_SIZE(id); + union { + u32 word; + u64 dword; + } tmp = {0}; + + if (copy_from_user(&tmp, uaddr, regsize) != 0) + return -EFAULT; + + switch (regsize) { + case 4: + *val = tmp.word; + break; + case 8: + *val = tmp.dword; + break; + } + return 0; +} + +/* Note it may really copy two u32 registers */ +static int reg_from_user32(u32 *val, const void __user *uaddr, u64 id) { - /* This Just Works because we are little endian. */ if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0) return -EFAULT; return 0; } -static int reg_to_user(void __user *uaddr, const void *val, u64 id) +static int reg_to_user64(void __user *uaddr, const u64 *val, u64 id) +{ + unsigned long regsize = KVM_REG_SIZE(id); + union { + u32 word; + u64 dword; + } tmp; + + switch (regsize) { + case 4: + tmp.word = *val; + break; + case 8: + tmp.dword = *val; + break; + } + + if (copy_to_user(uaddr, &tmp, regsize) != 0) + return -EFAULT; + return 0; +} + +/* Note it may really copy two u32 registers */ +static int reg_to_user32(void __user *uaddr, const u32 *val, u64 id) { - /* This Just Works because we are little endian. */ if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0) return -EFAULT; return 0; @@ -662,7 +706,7 @@ static int get_invariant_cp15(u64 id, void __user *uaddr) if (!r) return -ENOENT; - return reg_to_user(uaddr, &r->val, id); + return reg_to_user64(uaddr, &r->val, id); } static int set_invariant_cp15(u64 id, void __user *uaddr) @@ -678,7 +722,7 @@ static int set_invariant_cp15(u64 id, void __user *uaddr) if (!r) return -ENOENT; - err = reg_from_user(&val, uaddr, id); + err = reg_from_user64(&val, uaddr, id); if (err) return err; @@ -846,7 +890,7 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], + return reg_to_user64(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], id); } @@ -856,22 +900,22 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id); + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpexc, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id); + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpscr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id); + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpinst, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); + return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); case KVM_REG_ARM_VFP_MVFR0: val = fmrx(MVFR0); - return reg_to_user(uaddr, &val, id); + return reg_to_user32(uaddr, &val, id); case KVM_REG_ARM_VFP_MVFR1: val = fmrx(MVFR1); - return reg_to_user(uaddr, &val, id); + return reg_to_user32(uaddr, &val, id); case KVM_REG_ARM_VFP_FPSID: val = fmrx(FPSID); - return reg_to_user(uaddr, &val, id); + return reg_to_user32(uaddr, &val, id); default: return -ENOENT; } @@ -890,8 +934,8 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) if (vfpid < num_fp_regs()) { if (KVM_REG_SIZE(id) != 8) return -ENOENT; - return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid], - uaddr, id); + return reg_from_user64(&vcpu->arch.vfp_guest.fpregs[vfpid], + uaddr, id); } /* FP control registers are all 32 bit. */ @@ -900,28 +944,28 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) switch (vfpid) { case KVM_REG_ARM_VFP_FPEXC: - return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id); + return reg_from_user32(&vcpu->arch.vfp_guest.fpexc, uaddr, id); case KVM_REG_ARM_VFP_FPSCR: - return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id); + return reg_from_user32(&vcpu->arch.vfp_guest.fpscr, uaddr, id); case KVM_REG_ARM_VFP_FPINST: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id); + return reg_from_user32(&vcpu->arch.vfp_guest.fpinst, uaddr, id); case KVM_REG_ARM_VFP_FPINST2: - return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); + return reg_from_user32(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); /* These are invariant. */ case KVM_REG_ARM_VFP_MVFR0: - if (reg_from_user(&val, uaddr, id)) + if (reg_from_user32(&val, uaddr, id)) return -EFAULT; if (val != fmrx(MVFR0)) return -EINVAL; return 0; case KVM_REG_ARM_VFP_MVFR1: - if (reg_from_user(&val, uaddr, id)) + if (reg_from_user32(&val, uaddr, id)) return -EFAULT; if (val != fmrx(MVFR1)) return -EINVAL; return 0; case KVM_REG_ARM_VFP_FPSID: - if (reg_from_user(&val, uaddr, id)) + if (reg_from_user32(&val, uaddr, id)) return -EFAULT; if (val != fmrx(FPSID)) return -EINVAL; @@ -968,7 +1012,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) return get_invariant_cp15(reg->id, uaddr); /* Note: copies two regs if size is 64 bit. */ - return reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + return reg_to_user32(uaddr, &vcpu->arch.cp15[r->reg], reg->id); } int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) @@ -987,7 +1031,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) return set_invariant_cp15(reg->id, uaddr); /* Note: copies two regs if size is 64 bit */ - return reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + return reg_from_user32(&vcpu->arch.cp15[r->reg], uaddr, reg->id); } static unsigned int num_demux_regs(void)
This patch fixes issue of reading and writing ARM V7 registers values from/to user land. Existing code was designed to work only in LE case. struct kvm_one_reg ------------------ registers value passed through kvm_one_reg structure. It is used by KVM_SET_ONE_REG, KVM_GET_ONE_REG ioctls. Note by looking at structure itself we cannot tell what is size of register. Note that structure carries address of user memory, 'addr' where register should be read or written Setting register (from user-land to kvm) ---------------------------------------- kvm_arm_set_reg takes vcpu and pointer to struct kvm_one_reg which already read from user space kvm_arm_set_reg calls set_core_reg or kvm_arm_coproc_set_reg set_core_reg deals only with 4 bytes registers, it just reads 4 bytes from user space and store it properly into vcpu->arch.regs kvm_arm_coproc_set_reg deals with registers of different size. At certain point code reaches phase where it retrieves description of register by id and it knows register size, which could be either 4 or 8 bytes. Kernel code is ready to read values from user space, but destination type may vary. It could be pointer to 32 bit integer or it could be pointer to 64 bit integer. And all possible permutation of size and destination pointer are possible. Depending on destination pointer type, 4 bytes or 8 bytes, two new helper functions are introduced - reg_from_user32 and reg_from_user64. They are used instead of reg_from_user function which could work only in LE case. Size sizeof(*DstInt) Function used to read from user 4 4 reg_from_user32 8 4 reg_from_user32 - read two registers 4 8 reg_from_user64 - need special handling for BE 8 8 reg_from_user64 Getting register (to user-land from kvm) ---------------------------------------- Situation with reading registers is similar to writing. Integer pointer type of register to be copied could be 4 or 8 bytes. And size passed in struct kvm_one_reg could be 4 or 8. And any permutation is possible. Depending on src pointer type, 4 bytes or 8 bytes, two new helper functions are introduced - reg_from_user32 and reg_to_user64. They are used instead of reg_to_user function, which could work only in LE case. Size sizeof(*SrcInt) Function used to write to user 4 4 reg_to_user32 8 4 reg_to_user32 - writes two registers 4 8 reg_to_user64 - need special handleing for BE 8 8 reg_to_user64 Note code does assume that it can only deals with 4 or 8 byte registers. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> --- arch/arm/kvm/coproc.c | 94 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 69 insertions(+), 25 deletions(-)