| Message ID | 1387354943-8169-1-git-send-email-sachin.kamat@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/18/13 17:22, Sachin Kamat wrote: > Added PMIC node to Arndale-Octa board. > > Signed-off-by: Sachin Kamat<sachin.kamat@linaro.org> > --- > Changes since v1: > * Renamed the labels and fixed voltage levels as per board schema. > --- > arch/arm/boot/dts/exynos5420-arndale-octa.dts | 281 +++++++++++++++++++++++++ > 1 file changed, 281 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts > index ec68b0e89a25..edd933feaf48 100644 > --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts > +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts > @@ -11,6 +11,7 @@ > > /dts-v1/; > #include "exynos5420.dtsi" > +#include<dt-bindings/interrupt-controller/irq.h> > > / { > model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; > @@ -68,4 +69,284 @@ > bus-width =<4>; > }; > }; > + > + hsi2c_4: i2c@12CA0000 { > + status = "okay"; > + > + s2mps11_pmic@66 { > + compatible = "samsung,s2mps11-pmic"; > + reg =<0x66>; > + s2mps11,buck2-ramp-delay =<12>; > + s2mps11,buck34-ramp-delay =<12>; > + s2mps11,buck16-ramp-delay =<12>; > + s2mps11,buck6-ramp-enable =<1>; > + s2mps11,buck2-ramp-enable =<1>; > + s2mps11,buck3-ramp-enable =<1>; > + s2mps11,buck4-ramp-enable =<1>; > + > + interrupt-parent =<&gpx3>; > + interrupts =<2 IRQ_TYPE_LEVEL_HIGH>; > + > + s2mps11_osc: clocks { > + #clock-cells =<1>; > + clock-output-names = "s2mps11_ap", > + "s2mps11_cp", "s2mps11_bt"; > + }; > + > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "PVDD_ALIVE_1V0"; > + regulator-min-microvolt =<1000000>; > + regulator-max-microvolt =<1000000>; > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "PVDD_APIO_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "PVDD_APIO_MMCON_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "PVDD_ADC_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "PVDD_PLL_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + regulator-always-on; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "PVDD_ANAIP_1V0"; > + regulator-min-microvolt =<1000000>; > + regulator-max-microvolt =<1000000>; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "PVDD_ANAIP_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "PVDD_ABB_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "PVDD_USB_3V3"; > + regulator-min-microvolt =<3000000>; > + regulator-max-microvolt =<3000000>; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "PVDD_PRE_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + regulator-always-on; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "PVDD_USB_1V0"; > + regulator-min-microvolt =<1000000>; > + regulator-max-microvolt =<1000000>; > + regulator-always-on; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "PVDD_HSIC_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo13_reg: LDO13 { > + regulator-name = "PVDD_APIO_MMCOFF_2V8"; > + regulator-min-microvolt =<2800000>; > + regulator-max-microvolt =<2800000>; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "PVDD_PERI_2V8"; > + regulator-min-microvolt =<3300000>; > + regulator-max-microvolt =<3300000>; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "PVDD_PERI_3V3"; > + regulator-min-microvolt =<2200000>; > + regulator-max-microvolt =<2200000>; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "PVDD_EMMC_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo19_reg: LDO19 { > + regulator-name = "PVDD_TFLASH_2V8"; > + regulator-min-microvolt =<2800000>; > + regulator-max-microvolt =<2800000>; > + }; > + > + ldo20_reg: LDO20 { > + regulator-name = "PVDD_BTWIFI_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "PVDD_CAM1IO_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo23_reg: LDO23 { > + regulator-name = "PVDD_MIFS_1V1"; > + regulator-min-microvolt =<1200000>; > + regulator-max-microvolt =<1200000>; > + }; > + > + ldo24_reg: LDO24 { > + regulator-name = "PVDD_CAM1_AVDD_2V8"; > + regulator-min-microvolt =<2800000>; > + regulator-max-microvolt =<2800000>; > + }; > + > + ldo26_reg: LDO26 { > + regulator-name = "PVDD_CAM0_AF_2V8"; > + regulator-min-microvolt =<3000000>; > + regulator-max-microvolt =<3000000>; > + }; > + > + ldo27_reg: LDO27 { > + regulator-name = "PVDD_G3DS_1V0"; > + regulator-min-microvolt =<1200000>; > + regulator-max-microvolt =<1200000>; > + }; > + > + ldo28_reg: LDO28 { > + regulator-name = "PVDD_TSP_3V3"; > + regulator-min-microvolt =<3300000>; > + regulator-max-microvolt =<3300000>; > + }; > + > + ldo29_reg: LDO29 { > + regulator-name = "PVDD_AUDIO_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo31_reg: LDO31 { > + regulator-name = "PVDD_PERI_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo32_reg: LDO32 { > + regulator-name = "PVDD_LCD_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo33_reg: LDO33 { > + regulator-name = "PVDD_CAM0IO_1V8"; > + regulator-min-microvolt =<1800000>; > + regulator-max-microvolt =<1800000>; > + }; > + > + ldo35_reg: LDO35 { > + regulator-name = "PVDD_CAM0_DVDD_1V2"; > + regulator-min-microvolt =<1200000>; > + regulator-max-microvolt =<1200000>; > + }; > + > + ldo38_reg: LDO38 { > + regulator-name = "PVDD_CAM0_AVDD_2V8"; > + regulator-min-microvolt =<2800000>; > + regulator-max-microvolt =<2800000>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "PVDD_MIF_1V1"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<1100000>; > + regulator-always-on; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "vdd_arm"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<1000000>; > + regulator-always-on; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "PVDD_INT_1V0"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<1000000>; > + regulator-always-on; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "PVDD_G3D_1V0"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<1000000>; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "PVDD_LPDDR3_1V2"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<1200000>; > + regulator-always-on; > + }; > + > + buck6_reg: BUCK6 { > + regulator-name = "PVDD_KFC_1V0"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<1000000>; > + regulator-always-on; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "VIN_LLDO_1V4"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<1400000>; > + regulator-always-on; > + }; > + > + buck8_reg: BUCK8 { > + regulator-name = "VIN_MLDO_2V0"; > + regulator-min-microvolt =<800000>; > + regulator-max-microvolt =<2000000>; > + regulator-always-on; > + }; > + > + buck9_reg: BUCK9 { > + regulator-name = "VIN_HLDO_3V5"; > + regulator-min-microvolt =<3000000>; > + regulator-max-microvolt =<3500000>; > + regulator-always-on; > + }; > + > + buck10_reg: BUCK10 { > + regulator-name = "PVDD_EMMCF_2V8"; > + regulator-min-microvolt =<2800000>; > + regulator-max-microvolt =<2800000>; > + }; > + }; > + }; > + }; > + > }; Applied, thanks. - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index ec68b0e89a25..edd933feaf48 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; @@ -68,4 +69,284 @@ bus-width = <4>; }; }; + + hsi2c_4: i2c@12CA0000 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "PVDD_ALIVE_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "PVDD_APIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "PVDD_APIO_MMCON_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "PVDD_ADC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "PVDD_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "PVDD_ANAIP_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "PVDD_ANAIP_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "PVDD_ABB_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "PVDD_USB_3V3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "PVDD_PRE_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "PVDD_USB_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "PVDD_HSIC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "PVDD_APIO_MMCOFF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "PVDD_PERI_2V8"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "PVDD_PERI_3V3"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "PVDD_EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "PVDD_TFLASH_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "PVDD_BTWIFI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "PVDD_CAM1IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "PVDD_MIFS_1V1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "PVDD_CAM1_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "PVDD_CAM0_AF_2V8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "PVDD_G3DS_1V0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "PVDD_TSP_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "PVDD_AUDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "PVDD_PERI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo32_reg: LDO32 { + regulator-name = "PVDD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "PVDD_CAM0IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "PVDD_CAM0_DVDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "PVDD_CAM0_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "PVDD_MIF_1V1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "PVDD_INT_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "PVDD_G3D_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "PVDD_LPDDR3_1V2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "PVDD_KFC_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VIN_LLDO_1V4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VIN_MLDO_2V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VIN_HLDO_3V5"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "PVDD_EMMCF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; + }; + };
Added PMIC node to Arndale-Octa board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- Changes since v1: * Renamed the labels and fixed voltage levels as per board schema. --- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 281 +++++++++++++++++++++++++ 1 file changed, 281 insertions(+)