video: da8xx-fb: fix typos

Commit Message

Lad, Prabhakar Feb. 21, 2014, 6:41 a.m. UTC

From: "Lad, Prabhakar" <[e-mail]>

This patch fixes couple of typos in the comments
for da8xx-fb.c file.

Signed-off-by: Lad, Prabhakar <[e-mail]>
---
 drivers/video/da8xx-fb.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Tomi Valkeinen Feb. 28, 2014, 10:22 a.m. UTC | #1

On 21/02/14 08:41, Prabhakar Lad wrote:
> From: "Lad, Prabhakar" <[e-mail]>
> 
> This patch fixes couple of typos in the comments
> for da8xx-fb.c file.
> 
> Signed-off-by: Lad, Prabhakar <[e-mail]>

I think this kind of patch is a bit useless. The typos are only in
comments and the current sentences are easily understandable.

So this patch doesn't really help anything, only introduces
possibilities for conflicts.

So not applying.

 Tomi

Patch

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index a1d74dd..dced43a 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -265,7 +265,7 @@  static void lcd_enable_raster(void)
 		lcdc_write(0, LCD_CLK_RESET_REG);
 	mdelay(1);
 
-	/* Above reset sequence doesnot reset register context */
+	/* Above reset sequence does not reset register context */
 	reg = lcdc_read(LCD_RASTER_CTRL_REG);
 	if (!(reg & LCD_RASTER_ENABLE))
 		lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
@@ -357,7 +357,7 @@  static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
 	lcd_enable_raster();
 }
 
-/* Configure the Burst Size and fifo threhold of DMA */
+/* Configure the Burst Size and fifo threshold of DMA */
 static int lcd_cfg_dma(int burst_size, int fifo_th)
 {
 	u32 reg;
@@ -393,7 +393,7 @@  static void lcd_cfg_ac_bias(int period, int transitions_per_int)
 {
 	u32 reg;
 
-	/* Set the AC Bias Period and Number of Transisitons per Interrupt */
+	/* Set the AC Bias Period and Number of Transitions per Interrupt */
 	reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & 0xFFF00000;
 	reg |= LCD_AC_BIAS_FREQUENCY(period) |
 		LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);