new file mode 100644
@@ -0,0 +1,55 @@
+* Samsung Exynos5260 Clock Controller
+
+The Exynos5260 clock controller encapsulate all CMUs which are
+instantiaited independently from the device-tree. As a whole, these
+CMUs generates and supplies clocks to various controllers within
+the Exynos5260 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ "exynos5260-clock-top"
+ "exynos5260-clock-peri"
+ "exynos5260-clock-egl"
+ "exynos5260-clock-kfc"
+ "exynos5260-clock-g2d"
+ "exynos5260-clock-mif"
+ "exynos5260-clock-mfc"
+ "exynos5260-clock-g3d"
+ "exynos5260-clock-fsys"
+ "exynos5260-clock-aud"
+ "exynos5260-clock-isp"
+ "exynos5260-clock-gscl"
+ "exynos5260-clock-disp"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the each controller. Each
+clock is assigned a MACRO constant. These constants are defined in
+"dt-bindings/clk/exynos5260-clk.h". DT client nodes use this MACRO to
+specify the clock which they consume.
+
+Example 1: An example of a clock controller node is listed below.
+
+ cmu_disp: clock-controller@0x14550000 {
+ compatible = "exynos5260-clock-disp";
+ reg = <0x14550000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the
+ peri clock controller. Refer to the standard clock bindings for
+ information about 'clocks' and 'clock-names' property.
+
+ serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 146 0>;
+ clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
new file mode 100644
@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Provides Constants for Exynos5260 clocks.
+*/
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS5260_H
+#define _DT_BINDINGS_CLK_EXYNOS5260_H
+
+/*
+ * Clock names: XXXXXX_YYYYY_ZZZZZ
+ * |------| |----| |----|
+ * cmu type IP
+*/
+
+/* list of clocks for CMU_TOP */
+#define FIN_PLL 1
+#define TOP_FOUT_DISP_PLL 2
+#define TOP_FOUT_AUD_PLL 3
+#define TOP_SCLK_MMC0 4
+#define TOP_SCLK_MMC1 5
+#define TOP_SCLK_MMC2 6
+#define TOP_SCLK_HDMIPHY 7
+#define TOP_SCLK_FIMD1 8
+#define TOP_MOUT_FIMD1 9
+#define TOP_MOUT_DISP_PLL 10
+#define TOP_HDMI_PHY_PIXEL_CLKO 11
+#define TOP_NR_CLK 12
+
+/* list of clocks for CMU_EGL */
+#define EGL_FOUT_EGL_PLL 1
+#define EGL_FOUT_EGL_DPLL 2
+#define EGL_NR_CLK 3
+
+/* list of clocks for CMU_KFC */
+#define KFC_FOUT_KFC_PLL 1
+#define KFC_NR_CLK 2
+
+/* list of clocks for CMU_MIF */
+#define MIF_FOUT_MEM_PLL 1
+#define MIF_FOUT_BUS_PLL 2
+#define MIF_FOUT_MEDIA_PLL 3
+#define MIF_NR_CLK 4
+
+/* list of clocks for CMU_G3D */
+#define G3D_FOUT_G3D_PLL 1
+#define G3D_CLK_G3D_HPM 2
+#define G3D_CLK_G3D 3
+#define G3D_NR_CLK 4
+
+/* list of clocks for CMU_AUD */
+#define AUD_CLK_AUD_UART 1
+#define AUD_CLK_PCM 2
+#define AUD_CLK_I2S 3
+#define AUD_CLK_DMAC 4
+#define AUD_SCLK_AUD_UART 5
+#define AUD_SCLK_PCM 6
+#define AUD_SCLK_I2S 7
+#define AUD_NR_CLK 8
+
+/* list of clocks for CMU_MFC */
+#define MFC_CLK_MFC 1
+#define MFC_CLK_SMMU2_MFCM1 2
+#define MFC_CLK_SMMU2_MFCM0 3
+#define MFC_NR_CLK 4
+
+/* list of clocks for CMU_GSCL */
+#define GSCL_CLK_PIXEL_GSCL1 1
+#define GSCL_CLK_PIXEL_GSCL0 2
+#define GSCL_CLK_MSCL1 3
+#define GSCL_CLK_MSCL0 4
+#define GSCL_CLK_GSCL1 5
+#define GSCL_CLK_GSCL0 6
+#define GSCL_CLK_FIMC_LITE_D 7
+#define GSCL_CLK_FIMC_LITE_B 8
+#define GSCL_CLK_FIMC_LITE_A 9
+#define GSCL_CLK_CSIS1 10
+#define GSCL_CLK_CSIS0 11
+#define GSCL_CLK_SMMU3_LITE_D 12
+#define GSCL_CLK_SMMU3_LITE_B 13
+#define GSCL_CLK_SMMU3_LITE_A 14
+#define GSCL_CLK_SMMU3_GSCL0 15
+#define GSCL_CLK_SMMU3_GSCL1 16
+#define GSCL_CLK_SMMU3_MSCL0 17
+#define GSCL_CLK_SMMU3_MSCL1 18
+#define GSCL_SCLK_CSIS1_WRAP 19
+#define GSCL_SCLK_CSIS0_WRAP 20
+#define GSCL_NR_CLK 21
+
+/* list of clocks for CMU_FSYS */
+#define FSYS_CLK_TSI 1
+#define FSYS_CLK_USBLINK 2
+#define FSYS_CLK_USBHOST20 3
+#define FSYS_CLK_USBDRD30 4
+#define FSYS_CLK_SROMC 5
+#define FSYS_CLK_PDMA 6
+#define FSYS_CLK_MMC2 7
+#define FSYS_CLK_MMC1 8
+#define FSYS_CLK_MMC0 9
+#define FSYS_CLK_RTIC 10
+#define FSYS_CLK_SMMU_RTIC 11
+#define FSYS_PHYCLK_USBDRD30 12
+#define FSYS_PHYCLK_USBHOST20 13
+#define FSYS_NR_CLK 14
+
+/* list of clocks for CMU_PERI */
+#define PERI_CLK_WDT_KFC 1
+#define PERI_CLK_WDT_EGL 2
+#define PERI_CLK_HSIC3 3
+#define PERI_CLK_HSIC2 4
+#define PERI_CLK_HSIC1 5
+#define PERI_CLK_HSIC0 6
+#define PERI_CLK_PCM 7
+#define PERI_CLK_MCT 8
+#define PERI_CLK_I2S 9
+#define PERI_CLK_I2CHDMI 10
+#define PERI_CLK_I2C7 11
+#define PERI_CLK_I2C6 12
+#define PERI_CLK_I2C5 13
+#define PERI_CLK_I2C4 14
+#define PERI_CLK_I2C9 15
+#define PERI_CLK_I2C8 16
+#define PERI_CLK_I2C11 17
+#define PERI_CLK_I2C10 18
+#define PERI_CLK_HDMICEC 19
+#define PERI_CLK_EFUSE_WRITER 20
+#define PERI_CLK_ABB 21
+#define PERI_CLK_UART2 22
+#define PERI_CLK_UART1 23
+#define PERI_CLK_UART0 24
+#define PERI_CLK_ADC 25
+#define PERI_CLK_TMU4 26
+#define PERI_CLK_TMU3 27
+#define PERI_CLK_TMU2 28
+#define PERI_CLK_TMU1 29
+#define PERI_CLK_TMU0 30
+#define PERI_CLK_SPI2 31
+#define PERI_CLK_SPI1 32
+#define PERI_CLK_SPI0 33
+#define PERI_CLK_SPDIF 34
+#define PERI_CLK_PWM 35
+#define PERI_CLK_UART4 36
+#define PERI_CLK_CHIPID 37
+#define PERI_CLK_PROVKEY0 38
+#define PERI_CLK_PROVKEY1 39
+#define PERI_CLK_SECKEY 40
+#define PERI_CLK_TOP_RTC 41
+#define PERI_CLK_TZPC10 42
+#define PERI_CLK_TZPC9 43
+#define PERI_CLK_TZPC8 44
+#define PERI_CLK_TZPC7 45
+#define PERI_CLK_TZPC6 46
+#define PERI_CLK_TZPC5 47
+#define PERI_CLK_TZPC4 48
+#define PERI_CLK_TZPC3 49
+#define PERI_CLK_TZPC2 50
+#define PERI_CLK_TZPC1 51
+#define PERI_CLK_TZPC0 52
+#define PERI_SCLK_SPI2 53
+#define PERI_SCLK_SPI1 54
+#define PERI_SCLK_SPI0 55
+#define PERI_SCLK_SPDIF 56
+#define PERI_SCLK_I2S 57
+#define PERI_SCLK_PCM1 58
+#define PERI_SCLK_UART2 59
+#define PERI_SCLK_UART1 60
+#define PERI_SCLK_UART0 61
+#define PERI_NR_CLK 62
+
+/* list of clocks for CMU_DISP */
+#define DISP_CLK_SMMU_TV 1
+#define DISP_CLK_SMMU_FIMD1M1 2
+#define DISP_CLK_SMMU_FIMD1M0 3
+#define DISP_CLK_MIXER 4
+#define DISP_CLK_MIPIPHY 5
+#define DISP_CLK_HDMIPHY 6
+#define DISP_CLK_HDMI 7
+#define DISP_CLK_FIMD1 8
+#define DISP_CLK_DSIM1 9
+#define DISP_CLK_DPPHY 10
+#define DISP_CLK_DP 11
+#define DISP_SCLK_PIXEL 12
+#define DISP_MOUT_HDMI_PHY_PIXEL_USER 13
+#define DISP_MOUT_HDMI_PHY_PIXEL 14
+#define DISP_NR_CLK 15
+
+/* list of clocks for CMU_G2D */
+#define G2D_CLK_SMMU3_JPEG 1
+#define G2D_CLK_MDMA 2
+#define G2D_CLK_JPEG 3
+#define G2D_CLK_G2D 4
+#define G2D_CLK_SSS 5
+#define G2D_CLK_SLIM_SSS 6
+#define G2D_CLK_SMMU_SLIM_SSS 7
+#define G2D_CLK_SMMU_SSS 8
+#define G2D_CLK_SMMU_MDMA 9
+#define G2D_CLK_SMMU3_G2D 10
+#define G2D_NR_CLK 11
+
+/* list of clocks for CMU_ISP */
+#define ISP_CLK_GIC 1
+#define ISP_CLK_WDT 2
+#define ISP_CLK_UART 3
+#define ISP_CLK_SPI1 4
+#define ISP_CLK_SPI0 5
+#define ISP_CLK_SMMU_SCALERP 6
+#define ISP_CLK_SMMU_SCALERC 7
+#define ISP_CLK_SMMU_ISPCX 8
+#define ISP_CLK_SMMU_ISP 9
+#define ISP_CLK_SMMU_FD 10
+#define ISP_CLK_SMMU_DRC 11
+#define ISP_CLK_PWM 12
+#define ISP_CLK_MTCADC 13
+#define ISP_CLK_MPWM 14
+#define ISP_CLK_MCUCTL 15
+#define ISP_CLK_I2C1 16
+#define ISP_CLK_I2C0 17
+#define ISP_CLK_FIMC_SCALERP 18
+#define ISP_CLK_FIMC_SCALERC 19
+#define ISP_CLK_FIMC 20
+#define ISP_CLK_FIMC_FD 21
+#define ISP_CLK_FIMC_DRC 22
+#define ISP_CLK_CA5 23
+#define ISP_SCLK_SPI0_EXT 24
+#define ISP_SCLK_SPI1_EXT 25
+#define ISP_SCLK_UART_EXT 26
+#define ISP_NR_CLK 27
+
+#endif
Add macros which are used as Clock IDs in DT and clock file. It also adds the documentation for the exynos5260 clocks. Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> --- .../devicetree/bindings/clock/exynos5260-clock.txt | 55 +++++ include/dt-bindings/clk/exynos5260-clk.h | 233 ++++++++++++++++++++ 2 files changed, 288 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/exynos5260-clock.txt create mode 100644 include/dt-bindings/clk/exynos5260-clk.h