| Message ID | 1394637394-3960-3-git-send-email-rahul.sharma@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/13/2014 12:16 AM, Rahul Sharma wrote: > The patch adds the dts files for exynos5260. > > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > Signed-off-by: Arun Kumar K <arun.kk@samsung.com> > Reviewed-by: Tomasz Figa <t.figa@samsung.com> > --- > arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 574 +++++++++++++++++++++++++++++ > arch/arm/boot/dts/exynos5260.dtsi | 400 ++++++++++++++++++++ > 2 files changed, 974 insertions(+) > create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/exynos5260.dtsi > > diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi > new file mode 100644 > index 0000000..f6ee55e > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi > @@ -0,0 +1,574 @@ > +/* > + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source > + * > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device > + * tree nodes are listed in this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#define PIN_PULL_NONE 0 > +#define PIN_PULL_DOWN 1 > +#define PIN_PULL_UP 3 > + > +&pinctrl_0 { > + gpa0: gpa0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpa1: gpa1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpa2: gpa2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb0: gpb0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb1: gpb1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb2: gpb2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb3: gpb3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb4: gpb4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb5: gpb5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd0: gpd0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd1: gpd1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd2: gpd2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpe0: gpe0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpe1: gpe1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf0: gpf0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf1: gpf1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpk0: gpk0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx0: gpx0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx1: gpx1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx2: gpx2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx3: gpx3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + uart0_data: uart0-data { > + samsung,pins = "gpa0-0", "gpa0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart0_fctl: uart0-fctl { > + samsung,pins = "gpa0-2", "gpa0-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart1_data: uart1-data { > + samsung,pins = "gpa1-0", "gpa1-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart1_fctl: uart1-fctl { > + samsung,pins = "gpa1-2", "gpa1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart2_data: uart2-data { > + samsung,pins = "gpa1-4", "gpa1-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + spi0_bus: spi0-bus { > + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + spi1_bus: spi1-bus { > + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + usb3_vbus0_en: usb3-vbus0-en { > + samsung,pins = "gpa2-4"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + i2s1_bus: i2s1-bus { > + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", > + "gpb0-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + pcm1_bus: pcm1-bus { > + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", > + "gpb0-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + spdif1_bus: spdif1-bus { > + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + spi2_bus: spi2-bus { > + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c0_hs_bus: i2c0-hs-bus { > + samsung,pins = "gpb3-0", "gpb3-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c1_hs_bus: i2c1-hs-bus { > + samsung,pins = "gpb3-2", "gpb3-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c2_hs_bus: i2c2-hs-bus { > + samsung,pins = "gpb3-4", "gpb3-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c3_hs_bus: i2c3-hs-bus { > + samsung,pins = "gpb3-6", "gpb3-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c4_bus: i2c4-bus { > + samsung,pins = "gpb4-0", "gpb4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c5_bus: i2c5-bus { > + samsung,pins = "gpb4-2", "gpb4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c6_bus: i2c6-bus { > + samsung,pins = "gpb4-4", "gpb4-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c7_bus: i2c7-bus { > + samsung,pins = "gpb4-6", "gpb4-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c8_bus: i2c8-bus { > + samsung,pins = "gpb5-0", "gpb5-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c9_bus: i2c9-bus { > + samsung,pins = "gpb5-2", "gpb5-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c10_bus: i2c10-bus { > + samsung,pins = "gpb5-4", "gpb5-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c11_bus: i2c11-bus { > + samsung,pins = "gpb5-6", "gpb5-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + cam_gpio_a: cam-gpio-a { > + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", > + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", > + "gpe1-0", "gpe1-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + cam_gpio_b: cam-gpio-b { > + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", > + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + cam_i2c1_bus: cam-i2c1-bus { > + samsung,pins = "gpf0-2", "gpf0-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + cam_i2c0_bus: cam-i2c0-bus { > + samsung,pins = "gpf0-0", "gpf0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + cam_spi0_bus: cam-spi0-bus { > + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + cam_spi1_bus: cam-spi1-bus { > + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_1 { > + gpc0: gpc0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc1: gpc1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc2: gpc2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc3: gpc3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc4: gpc4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sd0_clk: sd0-clk { > + samsung,pins = "gpc0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_cmd: sd0-cmd { > + samsung,pins = "gpc0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus1: sd0-bus-width1 { > + samsung,pins = "gpc0-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus4: sd0-bus-width4 { > + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus8: sd0-bus-width8 { > + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_rdqs: sd0-rdqs { > + samsung,pins = "gpc0-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_clk: sd1-clk { > + samsung,pins = "gpc1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_cmd: sd1-cmd { > + samsung,pins = "gpc1-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus1: sd1-bus-width1 { > + samsung,pins = "gpc1-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus4: sd1-bus-width4 { > + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus8: sd1-bus-width8 { > + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_clk: sd2-clk { > + samsung,pins = "gpc2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cmd: sd2-cmd { > + samsung,pins = "gpc2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cd: sd2-cd { > + samsung,pins = "gpc2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus1: sd2-bus-width1 { > + samsung,pins = "gpc2-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus4: sd2-bus-width4 { > + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > +}; > + > +&pinctrl_2 { > + gpz0: gpz0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpz1: gpz1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi > new file mode 100644 > index 0000000..a99ef77 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5260.dtsi > @@ -0,0 +1,400 @@ > +/* > + * SAMSUNG EXYNOS5260 SoC device tree source > + * > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include "skeleton.dtsi" > + > +#include <dt-bindings/clock/exynos5260-clk.h> > + > +/ { > + compatible = "samsung,exynos5260"; > + interrupt-parent = <&gic>; > + > + aliases { > + pinctrl0 = &pinctrl_0; > + pinctrl1 = &pinctrl_1; > + pinctrl2 = &pinctrl_2; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a15"; > + reg = <0x0>; > + cci-control-port = <&cci_control1>; > + }; > + > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a15"; > + reg = <0x1>; > + cci-control-port = <&cci_control1>; > + }; > + > + cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x100>; > + cci-control-port = <&cci_control0>; > + }; > + > + cpu@101 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x101>; > + cci-control-port = <&cci_control0>; > + }; > + > + cpu@102 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x102>; > + cci-control-port = <&cci_control0>; > + }; > + > + cpu@103 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x103>; > + cci-control-port = <&cci_control0>; > + }; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clock_top: clock-controller@10010000 { > + compatible = "samsung,exynos5260-clock-top"; > + reg = <0x10010000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_peri: clock-controller@10200000 { > + compatible = "samsung,exynos5260-clock-peri"; > + reg = <0x10200000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_egl: clock-controller@10600000 { > + compatible = "samsung,exynos5260-clock-egl"; > + reg = <0x10600000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_kfc: clock-controller@10700000 { > + compatible = "samsung,exynos5260-clock-kfc"; > + reg = <0x10700000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_g2d: clock-controller@10A00000 { > + compatible = "samsung,exynos5260-clock-g2d"; > + reg = <0x10A00000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_mif: clock-controller@10CE0000 { > + compatible = "samsung,exynos5260-clock-mif"; > + reg = <0x10CE0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_mfc: clock-controller@11090000 { > + compatible = "samsung,exynos5260-clock-mfc"; > + reg = <0x11090000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_g3d: clock-controller@11830000 { > + compatible = "samsung,exynos5260-clock-g3d"; > + reg = <0x11830000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_fsys: clock-controller@122E0000 { > + compatible = "samsung,exynos5260-clock-fsys"; > + reg = <0x122E0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_aud: clock-controller@128C0000 { > + compatible = "samsung,exynos5260-clock-aud"; > + reg = <0x128C0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_isp: clock-controller@133C0000 { > + compatible = "samsung,exynos5260-clock-isp"; > + reg = <0x133C0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_gscl: clock-controller@13F00000 { > + compatible = "samsung,exynos5260-clock-gscl"; > + reg = <0x13F00000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_disp: clock-controller@14550000 { > + compatible = "samsung,exynos5260-clock-disp"; > + reg = <0x14550000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clocks { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; Even though you added #address-cells property I can not see "reg" property in any of "fixed-clock". Isn't it better either we can remove this or add "reg" property? Also all these fixed-clock are missing #clock-cells property. > + > + dptx_phy_ch0: phyclk_dptx_phy_ch0_txd { > + compatible = "fixed-clock"; > + clock-frequency = <270000000>; > + clock-output-names = "phyclk_dptx_phy_ch0_txd_clk"; > + }; > + > + dptx_phy_ch1: phyclk_dptx_phy_ch1_txd { > + compatible = "fixed-clock"; > + clock-frequency = <270000000>; > + clock-output-names = "phyclk_dptx_phy_ch1_txd_clk"; > + }; > + > + dptx_phy_ch2: phyclk_dptx_phy_ch2_txd { > + compatible = "fixed-clock"; > + clock-frequency = <270000000>; > + clock-output-names = "phyclk_dptx_phy_ch2_txd_clk"; > + }; > + > + dptx_phy_ch3: phyclk_dptx_phy_ch3_txd_clk { > + compatible = "fixed-clock"; > + clock-frequency = <270000000>; > + clock-output-names = "phyclk_dptx_phy_ch3_txd_clk"; > + }; > + > + hdmiphy_tmds_clko: phyclk_hdmi_phy_tmds_clko { > + compatible = "fixed-clock"; > + clock-frequency = <250000000>; > + clock-output-names = "phyclk_hdmi_phy_tmds_clko"; > + }; > + > + hdmiphy_pixel_clko: phyclk_hdmi_phy_pixel_clko { > + compatible = "fixed-clock"; > + clock-frequency = <166000000>; > + clock-output-names = "phyclk_hdmi_phy_pixel_clko"; > + }; > + > + hdmi_link_tmds_clkhi: phyclk_hdmi_link_o_tmds_clkhi { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "phyclk_hdmi_link_o_tmds_clkhi"; > + }; > + > + dptx_phy_ref_clk: phyclk_dptx_phy_o_ref_clk_24m { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + clock-output-names = "phyclk_dptx_phy_o_ref_clk_24m"; > + }; > + > + dptx_phy_clk_div2: phyclk_dptx_phy_clk_div2 { > + compatible = "fixed-clock"; > + clock-frequency = <135000000>; > + clock-output-names = "phyclk_dptx_phy_clk_div2"; > + }; > + > + mipi_dphy_rxclkesc0: phyclk_mipi_dphy_4l_m_rxclkesc0 { > + compatible = "fixed-clock"; > + clock-frequency = <20000000>; > + clock-output-names = "phyclk_mipi_dphy_4l_m_rxclkesc0"; > + }; > + > + usbhost20_phy_phyclock: phyclk_usbhost20_phy_phyclock { > + compatible = "fixed-clock"; > + clock-frequency = <60000000>; > + clock-output-names = "phyclk_usbhost20_phy_phyclock"; > + }; > + > + usbhost20_phy_freeclk: phyclk_usbhost20_phy_freeclk { > + compatible = "fixed-clock"; > + clock-frequency = <60000000>; > + clock-output-names = "phyclk_usbhost20_phy_freeclk"; > + }; > + > + usbhost20_phy_clk48mohci: phyclk_usbhost20_phy_clk48mohci { > + compatible = "fixed-clock"; > + clock-frequency = <48000000>; > + clock-output-names = "phyclk_usbhost20_phy_clk48mohci"; > + }; > + > + usbdrd30_pipe_pclk: phyclk_usbdrd30_udrd30_pipe_pclk { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "phyclk_usbdrd30_udrd30_pipe_pclk"; > + }; > + > + usbdrd30_phyclock: phyclk_usbdrd30_udrd30_phyclock { > + compatible = "fixed-clock"; > + clock-frequency = <60000000>; > + clock-output-names = "phyclk_usbdrd30_udrd30_phyclock"; > + }; > + }; > + > + gic: interrupt-controller@10481000 { > + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + #size-cells = <0>; > + interrupt-controller; > + reg = <0x10481000 0x1000>, > + <0x10482000 0x1000>, > + <0x10484000 0x2000>, > + <0x10486000 0x2000>; > + interrupts = <1 9 0xf04>; > + }; > + > + chipid: chipid@10000000 { > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > + }; > + > + mct: mct@100B0000 { > + compatible = "samsung,exynos4210-mct"; > + reg = <0x100B0000 0x1000>; > + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; > + clock-names = "fin_pll", "mct"; > + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, > + <0 107 0>, <0 122 0>, <0 123 0>, > + <0 124 0>, <0 125 0>, <0 126 0>, > + <0 127 0>, <0 128 0>, <0 129 0>; > + }; > + > + cci: cci@10F00000 { > + compatible = "arm,cci-400"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x10F00000 0x1000>; > + ranges = <0x0 0x10F00000 0x6000>; > + > + cci_control0: slave-if@4000 { > + compatible = "arm,cci-400-ctrl-if"; > + interface-type = "ace"; > + reg = <0x4000 0x1000>; > + }; > + > + cci_control1: slave-if@5000 { > + compatible = "arm,cci-400-ctrl-if"; > + interface-type = "ace"; > + reg = <0x5000 0x1000>; > + }; > + }; > + > + pinctrl_0: pinctrl@11600000 { > + compatible = "samsung,exynos5260-pinctrl"; > + reg = <0x11600000 0x1000>; > + interrupts = <0 79 0>; > + > + wakeup-interrupt-controller { > + compatible = "samsung,exynos4210-wakeup-eint"; > + interrupt-parent = <&gic>; > + interrupts = <0 32 0>; > + }; > + }; > + > + pinctrl_1: pinctrl@12290000 { > + compatible = "samsung,exynos5260-pinctrl"; > + reg = <0x12290000 0x1000>; > + interrupts = <0 157 0>; > + }; > + > + pinctrl_2: pinctrl@128B0000 { > + compatible = "samsung,exynos5260-pinctrl"; > + reg = <0x128B0000 0x1000>; > + interrupts = <0 243 0>; > + }; > + > + uart0: serial@12C00000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12C00000 0x100>; > + interrupts = <0 146 0>; > + clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + uart1: serial@12C10000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12C10000 0x100>; > + interrupts = <0 147 0>; > + clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + uart2: serial@12C20000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12C20000 0x100>; > + interrupts = <0 148 0>; > + clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + uart3: serial@12860000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12860000 0x100>; > + interrupts = <0 145 0>; > + clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + mmc_0: mmc0@12140000 { > + compatible = "samsung,exynos5250-dw-mshc"; > + reg = <0x12140000 0x2000>; > + interrupts = <0 156 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; > + clock-names = "biu", "ciu"; > + fifo-depth = <64>; > + status = "disabled"; > + }; > + > + mmc_1: mmc1@12150000 { > + compatible = "samsung,exynos5250-dw-mshc"; > + reg = <0x12150000 0x2000>; > + interrupts = <0 158 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; > + clock-names = "biu", "ciu"; > + fifo-depth = <64>; > + status = "disabled"; > + }; > + > + mmc_2: mmc2@12160000 { > + compatible = "samsung,exynos5250-dw-mshc"; > + reg = <0x12160000 0x2000>; > + interrupts = <0 159 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; > + clock-names = "biu", "ciu"; > + fifo-depth = <64>; > + status = "disabled"; > + }; > + }; > +}; > + > +#include "exynos5260-pinctrl.dtsi"
On 13 March 2014 06:28, Pankaj Dubey <pankaj.dubey@samsung.com> wrote: > On 03/13/2014 12:16 AM, Rahul Sharma wrote: >> >> The patch adds the dts files for exynos5260. >> >> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> >> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> >> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> >> Reviewed-by: Tomasz Figa <t.figa@samsung.com> >> --- >> arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 574 >> +++++++++++++++++++++++++++++ >> arch/arm/boot/dts/exynos5260.dtsi | 400 ++++++++++++++++++++ >> 2 files changed, 974 insertions(+) >> create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> create mode 100644 arch/arm/boot/dts/exynos5260.dtsi >> >> diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> new file mode 100644 >> index 0000000..f6ee55e >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi >> @@ -0,0 +1,574 @@ >> +/* >> + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source >> + * >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as >> device >> + * tree nodes are listed in this file. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +#define PIN_PULL_NONE 0 >> +#define PIN_PULL_DOWN 1 >> +#define PIN_PULL_UP 3 >> + >> +&pinctrl_0 { >> + gpa0: gpa0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa1: gpa1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa2: gpa2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb0: gpb0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb1: gpb1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb2: gpb2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb3: gpb3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb4: gpb4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb5: gpb5 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd0: gpd0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd1: gpd1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd2: gpd2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpe0: gpe0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpe1: gpe1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf0: gpf0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf1: gpf1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpk0: gpk0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx0: gpx0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx1: gpx1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx2: gpx2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx3: gpx3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + uart0_data: uart0-data { >> + samsung,pins = "gpa0-0", "gpa0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart0_fctl: uart0-fctl { >> + samsung,pins = "gpa0-2", "gpa0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_data: uart1-data { >> + samsung,pins = "gpa1-0", "gpa1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_fctl: uart1-fctl { >> + samsung,pins = "gpa1-2", "gpa1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart2_data: uart2-data { >> + samsung,pins = "gpa1-4", "gpa1-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi0_bus: spi0-bus { >> + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi1_bus: spi1-bus { >> + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + usb3_vbus0_en: usb3-vbus0-en { >> + samsung,pins = "gpa2-4"; >> + samsung,pin-function = <1>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2s1_bus: i2s1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", >> + "gpb0-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pcm1_bus: pcm1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", >> + "gpb0-4"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spdif1_bus: spdif1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi2_bus: spi2-bus { >> + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c0_hs_bus: i2c0-hs-bus { >> + samsung,pins = "gpb3-0", "gpb3-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c1_hs_bus: i2c1-hs-bus { >> + samsung,pins = "gpb3-2", "gpb3-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c2_hs_bus: i2c2-hs-bus { >> + samsung,pins = "gpb3-4", "gpb3-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c3_hs_bus: i2c3-hs-bus { >> + samsung,pins = "gpb3-6", "gpb3-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c4_bus: i2c4-bus { >> + samsung,pins = "gpb4-0", "gpb4-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c5_bus: i2c5-bus { >> + samsung,pins = "gpb4-2", "gpb4-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c6_bus: i2c6-bus { >> + samsung,pins = "gpb4-4", "gpb4-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c7_bus: i2c7-bus { >> + samsung,pins = "gpb4-6", "gpb4-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c8_bus: i2c8-bus { >> + samsung,pins = "gpb5-0", "gpb5-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c9_bus: i2c9-bus { >> + samsung,pins = "gpb5-2", "gpb5-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c10_bus: i2c10-bus { >> + samsung,pins = "gpb5-4", "gpb5-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c11_bus: i2c11-bus { >> + samsung,pins = "gpb5-6", "gpb5-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_gpio_a: cam-gpio-a { >> + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", >> + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", >> + "gpe1-0", "gpe1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_gpio_b: cam-gpio-b { >> + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", >> + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_i2c1_bus: cam-i2c1-bus { >> + samsung,pins = "gpf0-2", "gpf0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_i2c0_bus: cam-i2c0-bus { >> + samsung,pins = "gpf0-0", "gpf0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_spi0_bus: cam-spi0-bus { >> + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_spi1_bus: cam-spi1-bus { >> + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <0>; >> + }; >> +}; >> + >> +&pinctrl_1 { >> + gpc0: gpc0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc1: gpc1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc2: gpc2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc3: gpc3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc4: gpc4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + sd0_clk: sd0-clk { >> + samsung,pins = "gpc0-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_cmd: sd0-cmd { >> + samsung,pins = "gpc0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus1: sd0-bus-width1 { >> + samsung,pins = "gpc0-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus4: sd0-bus-width4 { >> + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus8: sd0-bus-width8 { >> + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_rdqs: sd0-rdqs { >> + samsung,pins = "gpc0-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_clk: sd1-clk { >> + samsung,pins = "gpc1-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_cmd: sd1-cmd { >> + samsung,pins = "gpc1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus1: sd1-bus-width1 { >> + samsung,pins = "gpc1-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus4: sd1-bus-width4 { >> + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus8: sd1-bus-width8 { >> + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_clk: sd2-clk { >> + samsung,pins = "gpc2-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cmd: sd2-cmd { >> + samsung,pins = "gpc2-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_NONE>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cd: sd2-cd { >> + samsung,pins = "gpc2-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus1: sd2-bus-width1 { >> + samsung,pins = "gpc2-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus4: sd2-bus-width4 { >> + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <PIN_PULL_UP>; >> + samsung,pin-drv = <3>; >> + }; >> +}; >> + >> +&pinctrl_2 { >> + gpz0: gpz0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpz1: gpz1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> +}; >> diff --git a/arch/arm/boot/dts/exynos5260.dtsi >> b/arch/arm/boot/dts/exynos5260.dtsi >> new file mode 100644 >> index 0000000..a99ef77 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5260.dtsi >> @@ -0,0 +1,400 @@ >> +/* >> + * SAMSUNG EXYNOS5260 SoC device tree source >> + * >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +#include "skeleton.dtsi" >> + >> +#include <dt-bindings/clock/exynos5260-clk.h> >> + >> +/ { >> + compatible = "samsung,exynos5260"; >> + interrupt-parent = <&gic>; >> + >> + aliases { >> + pinctrl0 = &pinctrl_0; >> + pinctrl1 = &pinctrl_1; >> + pinctrl2 = &pinctrl_2; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x0>; >> + cci-control-port = <&cci_control1>; >> + }; >> + >> + cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x1>; >> + cci-control-port = <&cci_control1>; >> + }; >> + >> + cpu@100 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x100>; >> + cci-control-port = <&cci_control0>; >> + }; >> + >> + cpu@101 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x101>; >> + cci-control-port = <&cci_control0>; >> + }; >> + >> + cpu@102 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x102>; >> + cci-control-port = <&cci_control0>; >> + }; >> + >> + cpu@103 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0x103>; >> + cci-control-port = <&cci_control0>; >> + }; >> + }; >> + >> + soc: soc { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + clock_top: clock-controller@10010000 { >> + compatible = "samsung,exynos5260-clock-top"; >> + reg = <0x10010000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_peri: clock-controller@10200000 { >> + compatible = "samsung,exynos5260-clock-peri"; >> + reg = <0x10200000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_egl: clock-controller@10600000 { >> + compatible = "samsung,exynos5260-clock-egl"; >> + reg = <0x10600000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_kfc: clock-controller@10700000 { >> + compatible = "samsung,exynos5260-clock-kfc"; >> + reg = <0x10700000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_g2d: clock-controller@10A00000 { >> + compatible = "samsung,exynos5260-clock-g2d"; >> + reg = <0x10A00000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_mif: clock-controller@10CE0000 { >> + compatible = "samsung,exynos5260-clock-mif"; >> + reg = <0x10CE0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_mfc: clock-controller@11090000 { >> + compatible = "samsung,exynos5260-clock-mfc"; >> + reg = <0x11090000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_g3d: clock-controller@11830000 { >> + compatible = "samsung,exynos5260-clock-g3d"; >> + reg = <0x11830000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_fsys: clock-controller@122E0000 { >> + compatible = "samsung,exynos5260-clock-fsys"; >> + reg = <0x122E0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_aud: clock-controller@128C0000 { >> + compatible = "samsung,exynos5260-clock-aud"; >> + reg = <0x128C0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_isp: clock-controller@133C0000 { >> + compatible = "samsung,exynos5260-clock-isp"; >> + reg = <0x133C0000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_gscl: clock-controller@13F00000 { >> + compatible = "samsung,exynos5260-clock-gscl"; >> + reg = <0x13F00000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clock_disp: clock-controller@14550000 { >> + compatible = "samsung,exynos5260-clock-disp"; >> + reg = <0x14550000 0x10000>; >> + #clock-cells = <1>; >> + }; >> + >> + clocks { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <0>; > > > Even though you added #address-cells property I can not see "reg" property > in any of "fixed-clock". > Isn't it better either we can remove this or add "reg" property? > Also all these fixed-clock are missing #clock-cells property. > Since it is a soc level addition, I enabled provision for adding reg property for fixed clocks in boards files (or in SoC file). Regards, Rahul Sharma. >> + >> + dptx_phy_ch0: phyclk_dptx_phy_ch0_txd { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch0_txd_clk"; >> + }; >> + >> + dptx_phy_ch1: phyclk_dptx_phy_ch1_txd { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch1_txd_clk"; >> + }; >> + >> + dptx_phy_ch2: phyclk_dptx_phy_ch2_txd { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch2_txd_clk"; >> + }; >> + >> + dptx_phy_ch3: phyclk_dptx_phy_ch3_txd_clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <270000000>; >> + clock-output-names = >> "phyclk_dptx_phy_ch3_txd_clk"; >> + }; >> + >> + hdmiphy_tmds_clko: phyclk_hdmi_phy_tmds_clko { >> + compatible = "fixed-clock"; >> + clock-frequency = <250000000>; >> + clock-output-names = >> "phyclk_hdmi_phy_tmds_clko"; >> + }; >> + >> + hdmiphy_pixel_clko: phyclk_hdmi_phy_pixel_clko { >> + compatible = "fixed-clock"; >> + clock-frequency = <166000000>; >> + clock-output-names = >> "phyclk_hdmi_phy_pixel_clko"; >> + }; >> + >> + hdmi_link_tmds_clkhi: >> phyclk_hdmi_link_o_tmds_clkhi { >> + compatible = "fixed-clock"; >> + clock-frequency = <125000000>; >> + clock-output-names = >> "phyclk_hdmi_link_o_tmds_clkhi"; >> + }; >> + >> + dptx_phy_ref_clk: phyclk_dptx_phy_o_ref_clk_24m { >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; >> + clock-output-names = >> "phyclk_dptx_phy_o_ref_clk_24m"; >> + }; >> + >> + dptx_phy_clk_div2: phyclk_dptx_phy_clk_div2 { >> + compatible = "fixed-clock"; >> + clock-frequency = <135000000>; >> + clock-output-names = >> "phyclk_dptx_phy_clk_div2"; >> + }; >> + >> + mipi_dphy_rxclkesc0: >> phyclk_mipi_dphy_4l_m_rxclkesc0 { >> + compatible = "fixed-clock"; >> + clock-frequency = <20000000>; >> + clock-output-names = >> "phyclk_mipi_dphy_4l_m_rxclkesc0"; >> + }; >> + >> + usbhost20_phy_phyclock: >> phyclk_usbhost20_phy_phyclock { >> + compatible = "fixed-clock"; >> + clock-frequency = <60000000>; >> + clock-output-names = >> "phyclk_usbhost20_phy_phyclock"; >> + }; >> + >> + usbhost20_phy_freeclk: >> phyclk_usbhost20_phy_freeclk { >> + compatible = "fixed-clock"; >> + clock-frequency = <60000000>; >> + clock-output-names = >> "phyclk_usbhost20_phy_freeclk"; >> + }; >> + >> + usbhost20_phy_clk48mohci: >> phyclk_usbhost20_phy_clk48mohci { >> + compatible = "fixed-clock"; >> + clock-frequency = <48000000>; >> + clock-output-names = >> "phyclk_usbhost20_phy_clk48mohci"; >> + }; >> + >> + usbdrd30_pipe_pclk: >> phyclk_usbdrd30_udrd30_pipe_pclk { >> + compatible = "fixed-clock"; >> + clock-frequency = <125000000>; >> + clock-output-names = >> "phyclk_usbdrd30_udrd30_pipe_pclk"; >> + }; >> + >> + usbdrd30_phyclock: phyclk_usbdrd30_udrd30_phyclock >> { >> + compatible = "fixed-clock"; >> + clock-frequency = <60000000>; >> + clock-output-names = >> "phyclk_usbdrd30_udrd30_phyclock"; >> + }; >> + }; >> + >> + gic: interrupt-controller@10481000 { >> + compatible = "arm,cortex-a15-gic", >> "arm,cortex-a9-gic"; >> + #interrupt-cells = <3>; >> + #address-cells = <0>; >> + #size-cells = <0>; >> + interrupt-controller; >> + reg = <0x10481000 0x1000>, >> + <0x10482000 0x1000>, >> + <0x10484000 0x2000>, >> + <0x10486000 0x2000>; >> + interrupts = <1 9 0xf04>; >> + }; >> + >> + chipid: chipid@10000000 { >> + compatible = "samsung,exynos4210-chipid"; >> + reg = <0x10000000 0x100>; >> + }; >> + >> + mct: mct@100B0000 { >> + compatible = "samsung,exynos4210-mct"; >> + reg = <0x100B0000 0x1000>; >> + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; >> + clock-names = "fin_pll", "mct"; >> + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, >> + <0 107 0>, <0 122 0>, <0 123 0>, >> + <0 124 0>, <0 125 0>, <0 126 0>, >> + <0 127 0>, <0 128 0>, <0 129 0>; >> + }; >> + >> + cci: cci@10F00000 { >> + compatible = "arm,cci-400"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + reg = <0x10F00000 0x1000>; >> + ranges = <0x0 0x10F00000 0x6000>; >> + >> + cci_control0: slave-if@4000 { >> + compatible = "arm,cci-400-ctrl-if"; >> + interface-type = "ace"; >> + reg = <0x4000 0x1000>; >> + }; >> + >> + cci_control1: slave-if@5000 { >> + compatible = "arm,cci-400-ctrl-if"; >> + interface-type = "ace"; >> + reg = <0x5000 0x1000>; >> + }; >> + }; >> + >> + pinctrl_0: pinctrl@11600000 { >> + compatible = "samsung,exynos5260-pinctrl"; >> + reg = <0x11600000 0x1000>; >> + interrupts = <0 79 0>; >> + >> + wakeup-interrupt-controller { >> + compatible = >> "samsung,exynos4210-wakeup-eint"; >> + interrupt-parent = <&gic>; >> + interrupts = <0 32 0>; >> + }; >> + }; >> + >> + pinctrl_1: pinctrl@12290000 { >> + compatible = "samsung,exynos5260-pinctrl"; >> + reg = <0x12290000 0x1000>; >> + interrupts = <0 157 0>; >> + }; >> + >> + pinctrl_2: pinctrl@128B0000 { >> + compatible = "samsung,exynos5260-pinctrl"; >> + reg = <0x128B0000 0x1000>; >> + interrupts = <0 243 0>; >> + }; >> + >> + uart0: serial@12C00000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12C00000 0x100>; >> + interrupts = <0 146 0>; >> + clocks = <&clock_peri PERI_CLK_UART0>, >> <&clock_peri PERI_SCLK_UART0>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + uart1: serial@12C10000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12C10000 0x100>; >> + interrupts = <0 147 0>; >> + clocks = <&clock_peri PERI_CLK_UART1>, >> <&clock_peri PERI_SCLK_UART1>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + uart2: serial@12C20000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12C20000 0x100>; >> + interrupts = <0 148 0>; >> + clocks = <&clock_peri PERI_CLK_UART2>, >> <&clock_peri PERI_SCLK_UART2>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + uart3: serial@12860000 { >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x12860000 0x100>; >> + interrupts = <0 145 0>; >> + clocks = <&clock_aud AUD_CLK_AUD_UART>, >> <&clock_aud AUD_SCLK_AUD_UART>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + mmc_0: mmc0@12140000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12140000 0x2000>; >> + interrupts = <0 156 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top >> TOP_SCLK_MMC0>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <64>; >> + status = "disabled"; >> + }; >> + >> + mmc_1: mmc1@12150000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12150000 0x2000>; >> + interrupts = <0 158 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top >> TOP_SCLK_MMC1>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <64>; >> + status = "disabled"; >> + }; >> + >> + mmc_2: mmc2@12160000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12160000 0x2000>; >> + interrupts = <0 159 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top >> TOP_SCLK_MMC2>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <64>; >> + status = "disabled"; >> + }; >> + }; >> +}; >> + >> +#include "exynos5260-pinctrl.dtsi" > > > > -- > Best Regards, > Pankaj Dubey > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 12.03.2014 16:16, Rahul Sharma wrote: > The patch adds the dts files for exynos5260. > > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > Signed-off-by: Arun Kumar K <arun.kk@samsung.com> > Reviewed-by: Tomasz Figa <t.figa@samsung.com> > --- > arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 574 +++++++++++++++++++++++++++++ > arch/arm/boot/dts/exynos5260.dtsi | 400 ++++++++++++++++++++ > 2 files changed, 974 insertions(+) > create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/exynos5260.dtsi > [snip] > + mmc_0: mmc0@12140000 { Node names should specify type of the device, so unit-specific IDs should be avoided. Please simply use mmc@12140000. The same comment for remaining MMC nodes below. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 13.03.2014 06:06, Rahul Sharma wrote: > On 13 March 2014 06:28, Pankaj Dubey <pankaj.dubey@samsung.com> wrote: >> On 03/13/2014 12:16 AM, Rahul Sharma wrote: [snip] >>> + clocks { >>> + compatible = "simple-bus"; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >> >> >> Even though you added #address-cells property I can not see "reg" property >> in any of "fixed-clock". >> Isn't it better either we can remove this or add "reg" property? >> Also all these fixed-clock are missing #clock-cells property. >> > > Since it is a soc level addition, I enabled provision for adding reg > property for > fixed clocks in boards files (or in SoC file). > All sub-nodes should follow the same pattern. After recent discussion with DT people, the conclusion is that simple-bus should be used only for MMIO platform devices with "reg" values mapped directly into address space in which the simple-bus node resides. So for now I'd remove the grouping and keep the clocks in "soc" node directly. [snip] >>> + >>> + dptx_phy_ch0: phyclk_dptx_phy_ch0_txd { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <270000000>; >>> + clock-output-names = >>> "phyclk_dptx_phy_ch0_txd_clk"; >>> + }; I'm not sure whether these clocks are really fixed clocks. They are output from certain PHY blocks which are not always-on, while using the fixed clock binding would suggest otherwise. IMHO they should be hidden inside the clock driver, without DT IDs assigned as a temporary hack, until proper support gets added for them (e.g. proper clock provider from appropriate PHY). Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi new file mode 100644 index 0000000..f6ee55e --- /dev/null +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -0,0 +1,574 @@ +/* + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb5: gpb5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + usb3_vbus0_en: usb3-vbus0-en { + samsung,pins = "gpa2-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spdif1_bus: spdif1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c0_hs_bus: i2c0-hs-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c1_hs_bus: i2c1-hs-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c2_hs_bus: i2c2-hs-bus { + samsung,pins = "gpb3-4", "gpb3-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c3_hs_bus: i2c3-hs-bus { + samsung,pins = "gpb3-6", "gpb3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb4-0", "gpb4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb4-2", "gpb4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpb4-4", "gpb4-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpb4-6", "gpb4-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c8_bus: i2c8-bus { + samsung,pins = "gpb5-0", "gpb5-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c9_bus: i2c9-bus { + samsung,pins = "gpb5-2", "gpb5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c10_bus: i2c10-bus { + samsung,pins = "gpb5-4", "gpb5-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c11_bus: i2c11-bus { + samsung,pins = "gpb5-6", "gpb5-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_2 { + gpz0: gpz0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpz1: gpz1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi new file mode 100644 index 0000000..a99ef77 --- /dev/null +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -0,0 +1,400 @@ +/* + * SAMSUNG EXYNOS5260 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" + +#include <dt-bindings/clock/exynos5260-clk.h> + +/ { + compatible = "samsung,exynos5260"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + cci-control-port = <&cci_control1>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + cci-control-port = <&cci_control1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cci-control-port = <&cci_control0>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cci-control-port = <&cci_control0>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cci-control-port = <&cci_control0>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cci-control-port = <&cci_control0>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_top: clock-controller@10010000 { + compatible = "samsung,exynos5260-clock-top"; + reg = <0x10010000 0x10000>; + #clock-cells = <1>; + }; + + clock_peri: clock-controller@10200000 { + compatible = "samsung,exynos5260-clock-peri"; + reg = <0x10200000 0x10000>; + #clock-cells = <1>; + }; + + clock_egl: clock-controller@10600000 { + compatible = "samsung,exynos5260-clock-egl"; + reg = <0x10600000 0x10000>; + #clock-cells = <1>; + }; + + clock_kfc: clock-controller@10700000 { + compatible = "samsung,exynos5260-clock-kfc"; + reg = <0x10700000 0x10000>; + #clock-cells = <1>; + }; + + clock_g2d: clock-controller@10A00000 { + compatible = "samsung,exynos5260-clock-g2d"; + reg = <0x10A00000 0x10000>; + #clock-cells = <1>; + }; + + clock_mif: clock-controller@10CE0000 { + compatible = "samsung,exynos5260-clock-mif"; + reg = <0x10CE0000 0x10000>; + #clock-cells = <1>; + }; + + clock_mfc: clock-controller@11090000 { + compatible = "samsung,exynos5260-clock-mfc"; + reg = <0x11090000 0x10000>; + #clock-cells = <1>; + }; + + clock_g3d: clock-controller@11830000 { + compatible = "samsung,exynos5260-clock-g3d"; + reg = <0x11830000 0x10000>; + #clock-cells = <1>; + }; + + clock_fsys: clock-controller@122E0000 { + compatible = "samsung,exynos5260-clock-fsys"; + reg = <0x122E0000 0x10000>; + #clock-cells = <1>; + }; + + clock_aud: clock-controller@128C0000 { + compatible = "samsung,exynos5260-clock-aud"; + reg = <0x128C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_isp: clock-controller@133C0000 { + compatible = "samsung,exynos5260-clock-isp"; + reg = <0x133C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_gscl: clock-controller@13F00000 { + compatible = "samsung,exynos5260-clock-gscl"; + reg = <0x13F00000 0x10000>; + #clock-cells = <1>; + }; + + clock_disp: clock-controller@14550000 { + compatible = "samsung,exynos5260-clock-disp"; + reg = <0x14550000 0x10000>; + #clock-cells = <1>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + dptx_phy_ch0: phyclk_dptx_phy_ch0_txd { + compatible = "fixed-clock"; + clock-frequency = <270000000>; + clock-output-names = "phyclk_dptx_phy_ch0_txd_clk"; + }; + + dptx_phy_ch1: phyclk_dptx_phy_ch1_txd { + compatible = "fixed-clock"; + clock-frequency = <270000000>; + clock-output-names = "phyclk_dptx_phy_ch1_txd_clk"; + }; + + dptx_phy_ch2: phyclk_dptx_phy_ch2_txd { + compatible = "fixed-clock"; + clock-frequency = <270000000>; + clock-output-names = "phyclk_dptx_phy_ch2_txd_clk"; + }; + + dptx_phy_ch3: phyclk_dptx_phy_ch3_txd_clk { + compatible = "fixed-clock"; + clock-frequency = <270000000>; + clock-output-names = "phyclk_dptx_phy_ch3_txd_clk"; + }; + + hdmiphy_tmds_clko: phyclk_hdmi_phy_tmds_clko { + compatible = "fixed-clock"; + clock-frequency = <250000000>; + clock-output-names = "phyclk_hdmi_phy_tmds_clko"; + }; + + hdmiphy_pixel_clko: phyclk_hdmi_phy_pixel_clko { + compatible = "fixed-clock"; + clock-frequency = <166000000>; + clock-output-names = "phyclk_hdmi_phy_pixel_clko"; + }; + + hdmi_link_tmds_clkhi: phyclk_hdmi_link_o_tmds_clkhi { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "phyclk_hdmi_link_o_tmds_clkhi"; + }; + + dptx_phy_ref_clk: phyclk_dptx_phy_o_ref_clk_24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "phyclk_dptx_phy_o_ref_clk_24m"; + }; + + dptx_phy_clk_div2: phyclk_dptx_phy_clk_div2 { + compatible = "fixed-clock"; + clock-frequency = <135000000>; + clock-output-names = "phyclk_dptx_phy_clk_div2"; + }; + + mipi_dphy_rxclkesc0: phyclk_mipi_dphy_4l_m_rxclkesc0 { + compatible = "fixed-clock"; + clock-frequency = <20000000>; + clock-output-names = "phyclk_mipi_dphy_4l_m_rxclkesc0"; + }; + + usbhost20_phy_phyclock: phyclk_usbhost20_phy_phyclock { + compatible = "fixed-clock"; + clock-frequency = <60000000>; + clock-output-names = "phyclk_usbhost20_phy_phyclock"; + }; + + usbhost20_phy_freeclk: phyclk_usbhost20_phy_freeclk { + compatible = "fixed-clock"; + clock-frequency = <60000000>; + clock-output-names = "phyclk_usbhost20_phy_freeclk"; + }; + + usbhost20_phy_clk48mohci: phyclk_usbhost20_phy_clk48mohci { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + clock-output-names = "phyclk_usbhost20_phy_clk48mohci"; + }; + + usbdrd30_pipe_pclk: phyclk_usbdrd30_udrd30_pipe_pclk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "phyclk_usbdrd30_udrd30_pipe_pclk"; + }; + + usbdrd30_phyclock: phyclk_usbdrd30_udrd30_phyclock { + compatible = "fixed-clock"; + clock-frequency = <60000000>; + clock-output-names = "phyclk_usbdrd30_udrd30_phyclock"; + }; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid: chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@100B0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x100B0000 0x1000>; + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; + clock-names = "fin_pll", "mct"; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 122 0>, <0 123 0>, + <0 124 0>, <0 125 0>, <0 126 0>, + <0 127 0>, <0 128 0>, <0 129 0>; + }; + + cci: cci@10F00000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10F00000 0x1000>; + ranges = <0x0 0x10F00000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + pinctrl_0: pinctrl@11600000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x11600000 0x1000>; + interrupts = <0 79 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@12290000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x12290000 0x1000>; + interrupts = <0 157 0>; + }; + + pinctrl_2: pinctrl@128B0000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x128B0000 0x1000>; + interrupts = <0 243 0>; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 146 0>; + clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 147 0>; + clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 148 0>; + clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart3: serial@12860000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12860000 0x100>; + interrupts = <0 145 0>; + clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + mmc_0: mmc0@12140000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12140000 0x2000>; + interrupts = <0 156 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_1: mmc1@12150000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12150000 0x2000>; + interrupts = <0 158 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_2: mmc2@12160000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12160000 0x2000>; + interrupts = <0 159 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + }; +}; + +#include "exynos5260-pinctrl.dtsi"