| Message ID | 1396944052-9887-9-git-send-email-haojian.zhuang@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Apr 08, 2014 at 09:00:48AM +0100, Haojian Zhuang wrote: > Add hip04.dtsi & hip04-d01.dts file to support HiP04 SoC platform. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > --- > Documentation/devicetree/bindings/arm/gic.txt | 1 + > .../bindings/arm/hisilicon/hisilicon.txt | 12 ++ > .../devicetree/bindings/clock/hip04-clock.txt | 20 ++ > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/hip04-d01.dts | 74 +++++++ > arch/arm/boot/dts/hip04.dtsi | 240 +++++++++++++++++++++ > 6 files changed, 348 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt > create mode 100644 arch/arm/boot/dts/hip04-d01.dts > create mode 100644 arch/arm/boot/dts/hip04.dtsi > > diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt > index 5573c08..150f7d6 100644 > --- a/Documentation/devicetree/bindings/arm/gic.txt > +++ b/Documentation/devicetree/bindings/arm/gic.txt > @@ -16,6 +16,7 @@ Main node required properties: > "arm,cortex-a9-gic" > "arm,cortex-a7-gic" > "arm,arm11mp-gic" > + "hisilicon,hip04-gic" > - interrupt-controller : Identifies the node as an interrupt controller > - #interrupt-cells : Specifies the number of cells needed to encode an > interrupt source. The type shall be a <u32> and the value shall be 3. > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > index df0a452..47c0a13 100644 > --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > @@ -4,6 +4,10 @@ Hisilicon Platforms Device Tree Bindings > Hi4511 Board > Required root node properties: > - compatible = "hisilicon,hi3620-hi4511"; > +HiP04 D01 Board > +Required root node properties: > + - compatible = "hisilicon,hip04-d01"; > + > > Hisilicon system controller > > @@ -31,6 +35,14 @@ Example: > reboot-offset = <0x4>; > }; > > + > +Hisilicon MCPM Implementation This is _NOT_ a hardware or system property. It is a Linux implementation detail. This does not belong here as-is. > + > +Required Properties: > +- compatible: "hisilicon,hip04-mcpm" > +- reg: Register address and size. > + > + The code was looking for several entries in the reg, and you don't describe what any of them are. > diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt > new file mode 100644 > index 0000000..4d31ae3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt > @@ -0,0 +1,20 @@ > +* Hisilicon HiP04 Clock Controller > + > +The HiP04 clock controller generates and supplies clock to various > +controllers within the HiP04 SoC. > + > +Required Properties: > + > +- compatible: should be one of the following. > + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. > + > +- reg: physical base address of the controller and length of memory mapped > + region. > + > +- #clock-cells: should be 1. > + > + > +Each clock is assigned an identifier and client nodes use this identifier > +to specify the clock which they consume. Delete this sentence -- that's a well understood facet of the clock bindings. What does the single clock cell represent? Is it a simple linear index? Is it sparse? Are there a set of well-known IDs? > + > +All these identifier could be found in <dt-bindings/clock/hip04-clock.h>. I'm really not a fan of dt includes, but I understand that others are. Please move this sentence into the #clock-cells description to make it clearer. > diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts > new file mode 100644 > index 0000000..a10dcf3 > --- /dev/null > +++ b/arch/arm/boot/dts/hip04-d01.dts > @@ -0,0 +1,74 @@ > +/* > + * Copyright (C) 2013-2014 Linaro Ltd. > + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * publishhed by the Free Software Foundation. > + */ > + > +/dts-v1/; > + > +#include "hip04.dtsi" > + > +/ { > + /* memory bus is 64-bit */ > + #address-cells = <2>; > + #size-cells = <1>; > + model = "Hisilicon D01 Development Board"; > + compatible = "hisilicon,hip04-d01"; > + I would expect commented /memreserve/ statements here. > + memory@0 { This memory doesn't start at 0, as your comment below explains. The unit-address (the bit after the '@') should math the address cells of the first reg entry. > + device_type = "memory"; > + /* > + * Bootloader loads kernel image into 0x1000_0000 region, > + * so disables the region between [0000_0000 - 1000_0000] > + * temporarily. How does it "disable" this region, and why? > + * Because the PHYS_TO_VIRT_OFFSET is calculated based on > + * the original region that kenrel is loaded. > + * This workaround will be removed only after UEFI updated. What problem exactly does this work around? > + */ > + reg = <0x00000000 0x10000000 0xc0000000>; > + }; > + > + memory@00000004c0000000 { Nit: Place a comma between 32-bit wide entries in the unit-address for clarity, e.g. memory@00000004,c0000000 > + device_type = "memory"; > + reg = <0x00000004 0xc0000000 0x40000000>; > + }; > + > + memory@0000000500000000 { > + device_type = "memory"; > + reg = <0x00000005 0x00000000 0x80000000>; > + }; > + > + memory@0000000580000000 { > + device_type = "memory"; > + reg = <0x00000005 0x80000000 0x80000000>; > + }; > + > + memory@0000000600000000 { > + device_type = "memory"; > + reg = <0x00000006 0x00000000 0x80000000>; > + }; > + > + memory@0000000680000000 { > + device_type = "memory"; > + reg = <0x00000006 0x80000000 0x80000000>; > + }; > + > + memory@0000000700000000 { > + device_type = "memory"; > + reg = <0x00000007 0x00000000 0x80000000>; > + }; > + > + memory@0000000780000000 { > + device_type = "memory"; > + reg = <0x00000007 0x80000000 0x80000000>; > + }; Please fold these into a single memory node with multiple reg entries. Is there a good reason to keep these separate that I'm not aware of? > + > + soc { > + uart0: uart@4007000 { > + status = "ok"; > + }; > + }; > +}; > diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi > new file mode 100644 > index 0000000..eb5e5a2 > --- /dev/null > +++ b/arch/arm/boot/dts/hip04.dtsi > @@ -0,0 +1,240 @@ > +/* > + * Hisilicon Ltd. HiP01 SoC > + * > + * Copyright (C) 2013-2014 Hisilicon Ltd. > + * Copyright (C) 2013-2014 Linaro Ltd. > + * > + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * publishhed by the Free Software Foundation. > + */ > + > +#include <dt-bindings/clock/hip04-clock.h> > + > +/ { > + /* memory bus is 64-bit */ > + #address-cells = <2>; > + #size-cells = <1>; [...] > + CPU3: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a15"; > + reg = <3>; > + }; > + CPU4: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a15"; > + reg = <0x100>; > + clock-frequency = <1350000000>; Why is there a clock-frequency property in some CPU nodes but not others? Please be consistent. [...] > + soc { > + /* It's a 32-bit SoC. */ > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "arm,amba-bus", "simple-bus"; You don't need both here. Either this is an AMBA bus or another MMIO bus, please choose. Existing dts are misleading in having both. > + device_type = "soc"; This is completely unnecessary. > + interrupt-parent = <&gic>; > + ranges = <0 0 0xe0000000 0x10000000>; > + > + gic: interrupt-controller@c01000 { > + compatible = "hisilicon,hip04-gic"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + interrupt-controller; > + > + /* gic dist base, gic cpu base */ > + reg = <0xc01000 0x1000>, <0xc02000 0x1000>; No GICH or GICV? > + }; > + > + mcpm: mcpm { > + compatible = "hisilicon,hip04-mcpm"; > + reg = <0x100 0x1000>, <0x3e00000 0x00100000>, > + <0x302a000 0x1000>; > + }; As mentioned elsewhere, this is meaningless. Please come up with a better name and/or split this into the actual components. > + > + clock: clock { > + compatible = "hisilicon,hip04-clock"; > + /* FIXME: the base of clock controller */ > + reg = <0 0x1000>; > + #clock-cells = <1>; > + }; Fix this or get rid of it. Cheers, Mark.
On Tue, Apr 08, 2014 at 04:00:48PM +0800, Haojian Zhuang wrote: > Add hip04.dtsi & hip04-d01.dts file to support HiP04 SoC platform. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> [...] > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > index df0a452..47c0a13 100644 > --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt [...] > @@ -31,6 +35,14 @@ Example: > reboot-offset = <0x4>; > }; > > + > +Hisilicon MCPM Implementation > + > +Required Properties: > +- compatible: "hisilicon,hip04-mcpm" > +- reg: Register address and size. > + > + Unless you have a component in your hardware called "MCPM", this is describing a power controller peripheral. If so, what is it? Cheers ---Dave
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 5573c08..150f7d6 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -16,6 +16,7 @@ Main node required properties: "arm,cortex-a9-gic" "arm,cortex-a7-gic" "arm,arm11mp-gic" + "hisilicon,hip04-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a <u32> and the value shall be 3. diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index df0a452..47c0a13 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -4,6 +4,10 @@ Hisilicon Platforms Device Tree Bindings Hi4511 Board Required root node properties: - compatible = "hisilicon,hi3620-hi4511"; +HiP04 D01 Board +Required root node properties: + - compatible = "hisilicon,hip04-d01"; + Hisilicon system controller @@ -31,6 +35,14 @@ Example: reboot-offset = <0x4>; }; + +Hisilicon MCPM Implementation + +Required Properties: +- compatible: "hisilicon,hip04-mcpm" +- reg: Register address and size. + + PCTRL: Peripheral misc control register Required Properties: diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt new file mode 100644 index 0000000..4d31ae3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt @@ -0,0 +1,20 @@ +* Hisilicon HiP04 Clock Controller + +The HiP04 clock controller generates and supplies clock to various +controllers within the HiP04 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hip04-clock.h>. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2145af6..d0cbc939 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb +dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts new file mode 100644 index 0000000..a10dcf3 --- /dev/null +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2013-2014 Linaro Ltd. + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; + +#include "hip04.dtsi" + +/ { + /* memory bus is 64-bit */ + #address-cells = <2>; + #size-cells = <1>; + model = "Hisilicon D01 Development Board"; + compatible = "hisilicon,hip04-d01"; + + memory@0 { + device_type = "memory"; + /* + * Bootloader loads kernel image into 0x1000_0000 region, + * so disables the region between [0000_0000 - 1000_0000] + * temporarily. + * Because the PHYS_TO_VIRT_OFFSET is calculated based on + * the original region that kenrel is loaded. + * This workaround will be removed only after UEFI updated. + */ + reg = <0x00000000 0x10000000 0xc0000000>; + }; + + memory@00000004c0000000 { + device_type = "memory"; + reg = <0x00000004 0xc0000000 0x40000000>; + }; + + memory@0000000500000000 { + device_type = "memory"; + reg = <0x00000005 0x00000000 0x80000000>; + }; + + memory@0000000580000000 { + device_type = "memory"; + reg = <0x00000005 0x80000000 0x80000000>; + }; + + memory@0000000600000000 { + device_type = "memory"; + reg = <0x00000006 0x00000000 0x80000000>; + }; + + memory@0000000680000000 { + device_type = "memory"; + reg = <0x00000006 0x80000000 0x80000000>; + }; + + memory@0000000700000000 { + device_type = "memory"; + reg = <0x00000007 0x00000000 0x80000000>; + }; + + memory@0000000780000000 { + device_type = "memory"; + reg = <0x00000007 0x80000000 0x80000000>; + }; + + soc { + uart0: uart@4007000 { + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi new file mode 100644 index 0000000..eb5e5a2 --- /dev/null +++ b/arch/arm/boot/dts/hip04.dtsi @@ -0,0 +1,240 @@ +/* + * Hisilicon Ltd. HiP01 SoC + * + * Copyright (C) 2013-2014 Hisilicon Ltd. + * Copyright (C) 2013-2014 Linaro Ltd. + * + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <dt-bindings/clock/hip04-clock.h> + +/ { + /* memory bus is 64-bit */ + #address-cells = <2>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + core2 { + cpu = <&CPU10>; + }; + core3 { + cpu = <&CPU11>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + core2 { + cpu = <&CPU14>; + }; + core3 { + cpu = <&CPU15>; + }; + }; + }; + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + clock-frequency = <1350000000>; + }; + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + clock-frequency = <1350000000>; + }; + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x102>; + clock-frequency = <1350000000>; + }; + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x103>; + clock-frequency = <1350000000>; + }; + CPU8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x200>; + clock-frequency = <1350000000>; + }; + CPU9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x201>; + clock-frequency = <1350000000>; + }; + CPU10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x202>; + clock-frequency = <1350000000>; + }; + CPU11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x203>; + clock-frequency = <1350000000>; + }; + CPU12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x300>; + clock-frequency = <1350000000>; + }; + CPU13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x301>; + clock-frequency = <1350000000>; + }; + CPU14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x302>; + clock-frequency = <1350000000>; + }; + CPU15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x303>; + clock-frequency = <1350000000>; + }; + }; + + soc { + /* It's a 32-bit SoC. */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus", "simple-bus"; + device_type = "soc"; + interrupt-parent = <&gic>; + ranges = <0 0 0xe0000000 0x10000000>; + + gic: interrupt-controller@c01000 { + compatible = "hisilicon,hip04-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + + /* gic dist base, gic cpu base */ + reg = <0xc01000 0x1000>, <0xc02000 0x1000>; + }; + + mcpm: mcpm { + compatible = "hisilicon,hip04-mcpm"; + reg = <0x100 0x1000>, <0x3e00000 0x00100000>, + <0x302a000 0x1000>; + }; + + clock: clock { + compatible = "hisilicon,hip04-clock"; + /* FIXME: the base of clock controller */ + reg = <0 0x1000>; + #clock-cells = <1>; + }; + + dual_timer0: dual_timer@3000000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x3000000 0x1000>; + interrupts = <0 224 4>; + clocks = <&clock HIP04_CLK_50M>; + clock-names = "apb_pclk"; + status = "ok"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + uart0: uart@4007000 { + compatible = "snps,dw-apb-uart"; + reg = <0x4007000 0x1000>; + interrupts = <0 381 4>; + clocks = <&clock HIP04_CLK_168M>; + clock-names = "uartclk"; + reg-shift = <2>; + status = "disabled"; + }; + }; +};
Add hip04.dtsi & hip04-d01.dts file to support HiP04 SoC platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- Documentation/devicetree/bindings/arm/gic.txt | 1 + .../bindings/arm/hisilicon/hisilicon.txt | 12 ++ .../devicetree/bindings/clock/hip04-clock.txt | 20 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/hip04-d01.dts | 74 +++++++ arch/arm/boot/dts/hip04.dtsi | 240 +++++++++++++++++++++ 6 files changed, 348 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt create mode 100644 arch/arm/boot/dts/hip04-d01.dts create mode 100644 arch/arm/boot/dts/hip04.dtsi