| Message ID | 1395960398-4238-2-git-send-email-robherring2@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Thu, Mar 27, 2014 at 05:46:36PM -0500, Rob Herring wrote: > From: Rob Herring <robh@kernel.org> > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/kernel/bios32.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > > diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c > index 317da88..31ec14a 100644 > --- a/arch/arm/kernel/bios32.c > +++ b/arch/arm/kernel/bios32.c > @@ -11,6 +11,7 @@ > #include <linux/slab.h> > #include <linux/init.h> > #include <linux/io.h> > +#include <linux/of_pci.h> > > #include <asm/mach-types.h> > #include <asm/mach/map.h> > @@ -337,6 +338,15 @@ void pcibios_fixup_bus(struct pci_bus *bus) > list_for_each_entry(dev, &bus->devices, bus_list) { > u16 cmd; > > + /* Ignore fully discovered devices */ > + if (dev->is_added) > + continue; > + > + set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); We already do this in pci_device_add(); why do we need it here, too? > + /* Read default IRQs and fixup if necessary */ > + dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); Could this be done in pcibios_enable_device() or some other per-device interface()? I'd like to get rid of pcibios_fixup_bus() eventually. > pci_read_config_word(dev, PCI_COMMAND, &cmd); > cmd |= features; > pci_write_config_word(dev, PCI_COMMAND, cmd); > @@ -681,3 +691,56 @@ void __init pci_map_io_early(unsigned long pfn) > pci_io_desc.pfn = pfn; > iotable_init(&pci_io_desc, 1); > } > + > +struct ioresource { > + struct list_head list; > + phys_addr_t start; > + resource_size_t size; > +}; > + > +static LIST_HEAD(io_list); > + > +int pci_register_io_range(phys_addr_t address, resource_size_t size) > +{ > + struct ioresource *res; > + resource_size_t allocated_size = 0; > + > + /* find if the range has not been already allocated */ > + list_for_each_entry(res, &io_list, list) { > + if (address >= res->start && > + address + size <= res->start + size) > + return 0; > + allocated_size += res->size; > + } > + > + /* range not already registered, check for space */ > + if (allocated_size + size > IO_SPACE_LIMIT) > + return -E2BIG; > + > + /* add the range in the list */ > + res = kzalloc(sizeof(*res), GFP_KERNEL); > + if (!res) > + return -ENOMEM; > + res->start = address; > + res->size = size; > + > + list_add_tail(&res->list, &io_list); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(pci_register_io_range); > + > +unsigned long pci_address_to_pio(phys_addr_t address) > +{ > + struct ioresource *res; > + > + list_for_each_entry(res, &io_list, list) { > + if (address >= res->start && > + address < res->start + res->size) { > + return res->start - address; > + } > + } > + > + return (unsigned long)-1; > +} > +EXPORT_SYMBOL_GPL(pci_address_to_pio); ISTR some discussion about this, so maybe this has already been addressed, but it doesn't seem right to export generically-named symbols like these from the ARM arch code. And they don't look very ARM-specific. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 24, 2014 at 6:20 PM, Bjorn Helgaas <bhelgaas@google.com> wrote: > On Thu, Mar 27, 2014 at 05:46:36PM -0500, Rob Herring wrote: >> From: Rob Herring <robh@kernel.org> >> >> Signed-off-by: Rob Herring <robh@kernel.org> >> --- >> arch/arm/kernel/bios32.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 63 insertions(+) >> >> diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c >> index 317da88..31ec14a 100644 >> --- a/arch/arm/kernel/bios32.c >> +++ b/arch/arm/kernel/bios32.c >> @@ -11,6 +11,7 @@ >> #include <linux/slab.h> >> #include <linux/init.h> >> #include <linux/io.h> >> +#include <linux/of_pci.h> >> >> #include <asm/mach-types.h> >> #include <asm/mach/map.h> >> @@ -337,6 +338,15 @@ void pcibios_fixup_bus(struct pci_bus *bus) >> list_for_each_entry(dev, &bus->devices, bus_list) { >> u16 cmd; >> >> + /* Ignore fully discovered devices */ >> + if (dev->is_added) >> + continue; >> + >> + set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); > > We already do this in pci_device_add(); why do we need it here, too? Because it was in the arm64 code. I'm not really sure. >> + /* Read default IRQs and fixup if necessary */ >> + dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); > > Could this be done in pcibios_enable_device() or some other per-device > interface()? I'd like to get rid of pcibios_fixup_bus() eventually. Probably. This should return NO_IRQ in the !OF case. We'd need to make sure that works. I had a loop at pcibios_fixup_bus across architectures and could make no sense of why things were done in here. It all seemed a bit random and left me with questions like shouldn't something always be needed. Probably a lot of pieces are redundant now that didn't use to be. It needs someone that knows more about PCI than me to look at. >> pci_read_config_word(dev, PCI_COMMAND, &cmd); >> cmd |= features; >> pci_write_config_word(dev, PCI_COMMAND, cmd); >> @@ -681,3 +691,56 @@ void __init pci_map_io_early(unsigned long pfn) >> pci_io_desc.pfn = pfn; >> iotable_init(&pci_io_desc, 1); >> } >> + >> +struct ioresource { >> + struct list_head list; >> + phys_addr_t start; >> + resource_size_t size; >> +}; >> + >> +static LIST_HEAD(io_list); >> + >> +int pci_register_io_range(phys_addr_t address, resource_size_t size) >> +{ >> + struct ioresource *res; >> + resource_size_t allocated_size = 0; >> + >> + /* find if the range has not been already allocated */ >> + list_for_each_entry(res, &io_list, list) { >> + if (address >= res->start && >> + address + size <= res->start + size) >> + return 0; >> + allocated_size += res->size; >> + } >> + >> + /* range not already registered, check for space */ >> + if (allocated_size + size > IO_SPACE_LIMIT) >> + return -E2BIG; >> + >> + /* add the range in the list */ >> + res = kzalloc(sizeof(*res), GFP_KERNEL); >> + if (!res) >> + return -ENOMEM; >> + res->start = address; >> + res->size = size; >> + >> + list_add_tail(&res->list, &io_list); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(pci_register_io_range); >> + >> +unsigned long pci_address_to_pio(phys_addr_t address) >> +{ >> + struct ioresource *res; >> + >> + list_for_each_entry(res, &io_list, list) { >> + if (address >= res->start && >> + address < res->start + res->size) { >> + return res->start - address; >> + } >> + } >> + >> + return (unsigned long)-1; >> +} >> +EXPORT_SYMBOL_GPL(pci_address_to_pio); > > ISTR some discussion about this, so maybe this has already been addressed, > but it doesn't seem right to export generically-named symbols like these > from the ARM arch code. And they don't look very ARM-specific. Right, I expect these to go away with Liviu's the next version. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 317da88..31ec14a 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/of_pci.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -337,6 +338,15 @@ void pcibios_fixup_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { u16 cmd; + /* Ignore fully discovered devices */ + if (dev->is_added) + continue; + + set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); + + /* Read default IRQs and fixup if necessary */ + dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); + pci_read_config_word(dev, PCI_COMMAND, &cmd); cmd |= features; pci_write_config_word(dev, PCI_COMMAND, cmd); @@ -681,3 +691,56 @@ void __init pci_map_io_early(unsigned long pfn) pci_io_desc.pfn = pfn; iotable_init(&pci_io_desc, 1); } + +struct ioresource { + struct list_head list; + phys_addr_t start; + resource_size_t size; +}; + +static LIST_HEAD(io_list); + +int pci_register_io_range(phys_addr_t address, resource_size_t size) +{ + struct ioresource *res; + resource_size_t allocated_size = 0; + + /* find if the range has not been already allocated */ + list_for_each_entry(res, &io_list, list) { + if (address >= res->start && + address + size <= res->start + size) + return 0; + allocated_size += res->size; + } + + /* range not already registered, check for space */ + if (allocated_size + size > IO_SPACE_LIMIT) + return -E2BIG; + + /* add the range in the list */ + res = kzalloc(sizeof(*res), GFP_KERNEL); + if (!res) + return -ENOMEM; + res->start = address; + res->size = size; + + list_add_tail(&res->list, &io_list); + + return 0; +} +EXPORT_SYMBOL_GPL(pci_register_io_range); + +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct ioresource *res; + + list_for_each_entry(res, &io_list, list) { + if (address >= res->start && + address < res->start + res->size) { + return res->start - address; + } + } + + return (unsigned long)-1; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio);