diff mbox

[v5,3/9] dt: exynos5250: Enable support for generic USB DRD phy

Message ID 1398263451-18023-4-git-send-email-gautam.vivek@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Vivek Gautam April 23, 2014, 2:30 p.m. UTC
Add device tree node for new usbdrd-phy driver, which
is based on generic phy framework.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/boot/dts/exynos5250.dtsi |   10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Tushar Behera April 25, 2014, 6:31 a.m. UTC | #1
On 04/23/2014 08:00 PM, Vivek Gautam wrote:
> Add device tree node for new usbdrd-phy driver, which
> is based on generic phy framework.
> 
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5250.dtsi |   10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 3742331..d4254c0 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -551,6 +551,16 @@
>  		};
>  	};
>  
> +	usbdrd_phy: phy@12100000 {
> +		compatible = "samsung,exynos5250-usbdrd-phy";
> +		reg = <0x12100000 0x100>;
> +		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
> +		clock-names = "phy", "ref";
> +		samsung,pmu-syscon = <&pmu_system_controller>;

Replace samsung,pmu-syscon by samsung,syscon-phandle ?

> +		samsung,pmu-offset = <0x704>;
> +		#phy-cells = <1>;
> +	};
> +
>  	usb@12110000 {
>  		compatible = "samsung,exynos4210-ehci";
>  		reg = <0x12110000 0x100>;
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 3742331..d4254c0 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -551,6 +551,16 @@ 
 		};
 	};
 
+	usbdrd_phy: phy@12100000 {
+		compatible = "samsung,exynos5250-usbdrd-phy";
+		reg = <0x12100000 0x100>;
+		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		samsung,pmu-offset = <0x704>;
+		#phy-cells = <1>;
+	};
+
 	usb@12110000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12110000 0x100>;