| Message ID | 1398162345-3163-1-git-send-email-sourav.poddar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/22/2014 01:25 PM, Sourav Poddar wrote: > We need "tblclk" clock data for the functioning of ehrpwm > module. Hence, populating the required clock information > in clock dts file. > > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > --- > arch/arm/boot/dts/am43xx-clocks.dtsi | 84 ++++++++++++++++++++++++++++++++++ > drivers/clk/ti/clk-43xx.c | 6 +++ > 2 files changed, 90 insertions(+) > > diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi > index 142009c..869f9a5 100644 > --- a/arch/arm/boot/dts/am43xx-clocks.dtsi > +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi > @@ -87,6 +87,90 @@ > clock-mult = <1>; > clock-div = <1>; > }; > + > + ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-no-wait-gate-clock"; > + clocks = <&dpll_per_m2_ck>; > + ti,bit-shift = <0>; > + reg = <0x0664>; > + }; > + > + ehrpwm0_tbclk: ehrpwm0_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-clock"; > + clocks = <&ehrpwm0_gate_tbclk>; > + }; Why do you use composite-clock type here? I see only add one sub-clock to the composite, thus the composite part is unused. How about using a gate-clock type only? Same question applies for the rest of the patch also. -Tero > + > + ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-no-wait-gate-clock"; > + clocks = <&dpll_per_m2_ck>; > + ti,bit-shift = <1>; > + reg = <0x0664>; > + }; > + > + ehrpwm1_tbclk: ehrpwm1_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-clock"; > + clocks = <&ehrpwm1_gate_tbclk>; > + }; > + > + ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-no-wait-gate-clock"; > + clocks = <&dpll_per_m2_ck>; > + ti,bit-shift = <2>; > + reg = <0x0664>; > + }; > + > + ehrpwm2_tbclk: ehrpwm2_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-clock"; > + clocks = <&ehrpwm2_gate_tbclk>; > + }; > + > + ehrpwm3_gate_tbclk: ehrpwm3_gate_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-no-wait-gate-clock"; > + clocks = <&dpll_per_m2_ck>; > + ti,bit-shift = <2>; > + reg = <0x0664>; > + }; > + > + ehrpwm3_tbclk: ehrpwm3_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-clock"; > + clocks = <&ehrpwm3_gate_tbclk>; > + }; > + > + ehrpwm4_gate_tbclk: ehrpwm4_gate_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-no-wait-gate-clock"; > + clocks = <&dpll_per_m2_ck>; > + ti,bit-shift = <2>; > + reg = <0x0664>; > + }; > + > + ehrpwm4_tbclk: ehrpwm4_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-clock"; > + clocks = <&ehrpwm4_gate_tbclk>; > + }; > + > + ehrpwm5_gate_tbclk: ehrpwm5_gate_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-no-wait-gate-clock"; > + clocks = <&dpll_per_m2_ck>; > + ti,bit-shift = <2>; > + reg = <0x0664>; > + }; > + > + ehrpwm5_tbclk: ehrpwm5_tbclk { > + #clock-cells = <0>; > + compatible = "ti,composite-clock"; > + clocks = <&ehrpwm5_gate_tbclk>; > + }; > }; > &prcm_clocks { > clk_32768_ck: clk_32768_ck { > diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c > index 67c8de5..5413a6a 100644 > --- a/drivers/clk/ti/clk-43xx.c > +++ b/drivers/clk/ti/clk-43xx.c > @@ -105,6 +105,12 @@ static struct ti_dt_clk am43xx_clks[] = { > DT_CLK(NULL, "func_12m_clk", "func_12m_clk"), > DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"), > DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"), > + DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), > + DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), > + DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), > + DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), > + DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), > + DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), > { .node_name = NULL }, > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tero, On Tuesday 22 April 2014 06:11 PM, Tero Kristo wrote: > On 04/22/2014 01:25 PM, Sourav Poddar wrote: >> We need "tblclk" clock data for the functioning of ehrpwm >> module. Hence, populating the required clock information >> in clock dts file. >> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >> --- >> arch/arm/boot/dts/am43xx-clocks.dtsi | 84 >> ++++++++++++++++++++++++++++++++++ >> drivers/clk/ti/clk-43xx.c | 6 +++ >> 2 files changed, 90 insertions(+) >> >> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi >> b/arch/arm/boot/dts/am43xx-clocks.dtsi >> index 142009c..869f9a5 100644 >> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi >> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi >> @@ -87,6 +87,90 @@ >> clock-mult = <1>; >> clock-div = <1>; >> }; >> + >> + ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-no-wait-gate-clock"; >> + clocks = <&dpll_per_m2_ck>; >> + ti,bit-shift = <0>; >> + reg = <0x0664>; >> + }; >> + >> + ehrpwm0_tbclk: ehrpwm0_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-clock"; >> + clocks = <&ehrpwm0_gate_tbclk>; >> + }; > > Why do you use composite-clock type here? I see only add one sub-clock > to the composite, thus the composite part is unused. How about using a > gate-clock type only? Same question applies for the rest of the patch > also. > Yes, I though of doing so and I think it should be fine to use gate-clock only. I did this following the ehrpwm clock data in "am33xx-clock.dtsi" file, where we use composite clock for ehrpwm. I think it needs to be changed there also.? -Sourav > -Tero > >> + >> + ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-no-wait-gate-clock"; >> + clocks = <&dpll_per_m2_ck>; >> + ti,bit-shift = <1>; >> + reg = <0x0664>; >> + }; >> + >> + ehrpwm1_tbclk: ehrpwm1_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-clock"; >> + clocks = <&ehrpwm1_gate_tbclk>; >> + }; >> + >> + ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-no-wait-gate-clock"; >> + clocks = <&dpll_per_m2_ck>; >> + ti,bit-shift = <2>; >> + reg = <0x0664>; >> + }; >> + >> + ehrpwm2_tbclk: ehrpwm2_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-clock"; >> + clocks = <&ehrpwm2_gate_tbclk>; >> + }; >> + >> + ehrpwm3_gate_tbclk: ehrpwm3_gate_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-no-wait-gate-clock"; >> + clocks = <&dpll_per_m2_ck>; >> + ti,bit-shift = <2>; >> + reg = <0x0664>; >> + }; >> + >> + ehrpwm3_tbclk: ehrpwm3_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-clock"; >> + clocks = <&ehrpwm3_gate_tbclk>; >> + }; >> + >> + ehrpwm4_gate_tbclk: ehrpwm4_gate_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-no-wait-gate-clock"; >> + clocks = <&dpll_per_m2_ck>; >> + ti,bit-shift = <2>; >> + reg = <0x0664>; >> + }; >> + >> + ehrpwm4_tbclk: ehrpwm4_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-clock"; >> + clocks = <&ehrpwm4_gate_tbclk>; >> + }; >> + >> + ehrpwm5_gate_tbclk: ehrpwm5_gate_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-no-wait-gate-clock"; >> + clocks = <&dpll_per_m2_ck>; >> + ti,bit-shift = <2>; >> + reg = <0x0664>; >> + }; >> + >> + ehrpwm5_tbclk: ehrpwm5_tbclk { >> + #clock-cells = <0>; >> + compatible = "ti,composite-clock"; >> + clocks = <&ehrpwm5_gate_tbclk>; >> + }; >> }; >> &prcm_clocks { >> clk_32768_ck: clk_32768_ck { >> diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c >> index 67c8de5..5413a6a 100644 >> --- a/drivers/clk/ti/clk-43xx.c >> +++ b/drivers/clk/ti/clk-43xx.c >> @@ -105,6 +105,12 @@ static struct ti_dt_clk am43xx_clks[] = { >> DT_CLK(NULL, "func_12m_clk", "func_12m_clk"), >> DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"), >> DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"), >> + DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), >> + DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), >> + DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), >> + DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), >> + DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), >> + DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), >> { .node_name = NULL }, >> }; >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/25/2014 08:42 AM, sourav wrote: > Hi Tero, > > On Tuesday 22 April 2014 06:11 PM, Tero Kristo wrote: >> On 04/22/2014 01:25 PM, Sourav Poddar wrote: >>> We need "tblclk" clock data for the functioning of ehrpwm >>> module. Hence, populating the required clock information >>> in clock dts file. >>> >>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >>> --- >>> arch/arm/boot/dts/am43xx-clocks.dtsi | 84 >>> ++++++++++++++++++++++++++++++++++ >>> drivers/clk/ti/clk-43xx.c | 6 +++ >>> 2 files changed, 90 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi >>> b/arch/arm/boot/dts/am43xx-clocks.dtsi >>> index 142009c..869f9a5 100644 >>> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi >>> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi >>> @@ -87,6 +87,90 @@ >>> clock-mult = <1>; >>> clock-div = <1>; >>> }; >>> + >>> + ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-no-wait-gate-clock"; >>> + clocks = <&dpll_per_m2_ck>; >>> + ti,bit-shift = <0>; >>> + reg = <0x0664>; >>> + }; >>> + >>> + ehrpwm0_tbclk: ehrpwm0_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-clock"; >>> + clocks = <&ehrpwm0_gate_tbclk>; >>> + }; >> >> Why do you use composite-clock type here? I see only add one sub-clock >> to the composite, thus the composite part is unused. How about using a >> gate-clock type only? Same question applies for the rest of the patch >> also. >> > > Yes, I though of doing so and I think it should be fine to use > gate-clock only. I did this following the ehrpwm clock data in > "am33xx-clock.dtsi" file, where we use composite clock for ehrpwm. I > think it needs to be changed there also.? Yeah, that seems to be a quirk that was generated by the automatic conversion script, there is no reason for these being composite clocks either. -Tero > > -Sourav >> -Tero >> >>> + >>> + ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-no-wait-gate-clock"; >>> + clocks = <&dpll_per_m2_ck>; >>> + ti,bit-shift = <1>; >>> + reg = <0x0664>; >>> + }; >>> + >>> + ehrpwm1_tbclk: ehrpwm1_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-clock"; >>> + clocks = <&ehrpwm1_gate_tbclk>; >>> + }; >>> + >>> + ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-no-wait-gate-clock"; >>> + clocks = <&dpll_per_m2_ck>; >>> + ti,bit-shift = <2>; >>> + reg = <0x0664>; >>> + }; >>> + >>> + ehrpwm2_tbclk: ehrpwm2_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-clock"; >>> + clocks = <&ehrpwm2_gate_tbclk>; >>> + }; >>> + >>> + ehrpwm3_gate_tbclk: ehrpwm3_gate_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-no-wait-gate-clock"; >>> + clocks = <&dpll_per_m2_ck>; >>> + ti,bit-shift = <2>; >>> + reg = <0x0664>; >>> + }; >>> + >>> + ehrpwm3_tbclk: ehrpwm3_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-clock"; >>> + clocks = <&ehrpwm3_gate_tbclk>; >>> + }; >>> + >>> + ehrpwm4_gate_tbclk: ehrpwm4_gate_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-no-wait-gate-clock"; >>> + clocks = <&dpll_per_m2_ck>; >>> + ti,bit-shift = <2>; >>> + reg = <0x0664>; >>> + }; >>> + >>> + ehrpwm4_tbclk: ehrpwm4_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-clock"; >>> + clocks = <&ehrpwm4_gate_tbclk>; >>> + }; >>> + >>> + ehrpwm5_gate_tbclk: ehrpwm5_gate_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-no-wait-gate-clock"; >>> + clocks = <&dpll_per_m2_ck>; >>> + ti,bit-shift = <2>; >>> + reg = <0x0664>; >>> + }; >>> + >>> + ehrpwm5_tbclk: ehrpwm5_tbclk { >>> + #clock-cells = <0>; >>> + compatible = "ti,composite-clock"; >>> + clocks = <&ehrpwm5_gate_tbclk>; >>> + }; >>> }; >>> &prcm_clocks { >>> clk_32768_ck: clk_32768_ck { >>> diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c >>> index 67c8de5..5413a6a 100644 >>> --- a/drivers/clk/ti/clk-43xx.c >>> +++ b/drivers/clk/ti/clk-43xx.c >>> @@ -105,6 +105,12 @@ static struct ti_dt_clk am43xx_clks[] = { >>> DT_CLK(NULL, "func_12m_clk", "func_12m_clk"), >>> DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"), >>> DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"), >>> + DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), >>> + DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), >>> + DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), >>> + DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), >>> + DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), >>> + DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), >>> { .node_name = NULL }, >>> }; >>> >>> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 25 April 2014 12:19 PM, Tero Kristo wrote: > On 04/25/2014 08:42 AM, sourav wrote: >> Hi Tero, >> >> On Tuesday 22 April 2014 06:11 PM, Tero Kristo wrote: >>> On 04/22/2014 01:25 PM, Sourav Poddar wrote: >>>> We need "tblclk" clock data for the functioning of ehrpwm >>>> module. Hence, populating the required clock information >>>> in clock dts file. >>>> >>>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >>>> --- >>>> arch/arm/boot/dts/am43xx-clocks.dtsi | 84 >>>> ++++++++++++++++++++++++++++++++++ >>>> drivers/clk/ti/clk-43xx.c | 6 +++ >>>> 2 files changed, 90 insertions(+) >>>> >>>> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi >>>> b/arch/arm/boot/dts/am43xx-clocks.dtsi >>>> index 142009c..869f9a5 100644 >>>> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi >>>> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi >>>> @@ -87,6 +87,90 @@ >>>> clock-mult = <1>; >>>> clock-div = <1>; >>>> }; >>>> + >>>> + ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-no-wait-gate-clock"; >>>> + clocks = <&dpll_per_m2_ck>; >>>> + ti,bit-shift = <0>; >>>> + reg = <0x0664>; >>>> + }; >>>> + >>>> + ehrpwm0_tbclk: ehrpwm0_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-clock"; >>>> + clocks = <&ehrpwm0_gate_tbclk>; >>>> + }; >>> >>> Why do you use composite-clock type here? I see only add one sub-clock >>> to the composite, thus the composite part is unused. How about using a >>> gate-clock type only? Same question applies for the rest of the patch >>> also. >>> >> >> Yes, I though of doing so and I think it should be fine to use >> gate-clock only. I did this following the ehrpwm clock data in >> "am33xx-clock.dtsi" file, where we use composite clock for ehrpwm. I >> think it needs to be changed there also.? > > Yeah, that seems to be a quirk that was generated by the automatic > conversion script, there is no reason for these being composite clocks > either. OK, I will send the updated patch for both am33xx and am43xx devices. Thanks, Sourav > > -Tero > >> >> -Sourav >>> -Tero >>> >>>> + >>>> + ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-no-wait-gate-clock"; >>>> + clocks = <&dpll_per_m2_ck>; >>>> + ti,bit-shift = <1>; >>>> + reg = <0x0664>; >>>> + }; >>>> + >>>> + ehrpwm1_tbclk: ehrpwm1_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-clock"; >>>> + clocks = <&ehrpwm1_gate_tbclk>; >>>> + }; >>>> + >>>> + ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-no-wait-gate-clock"; >>>> + clocks = <&dpll_per_m2_ck>; >>>> + ti,bit-shift = <2>; >>>> + reg = <0x0664>; >>>> + }; >>>> + >>>> + ehrpwm2_tbclk: ehrpwm2_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-clock"; >>>> + clocks = <&ehrpwm2_gate_tbclk>; >>>> + }; >>>> + >>>> + ehrpwm3_gate_tbclk: ehrpwm3_gate_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-no-wait-gate-clock"; >>>> + clocks = <&dpll_per_m2_ck>; >>>> + ti,bit-shift = <2>; >>>> + reg = <0x0664>; >>>> + }; >>>> + >>>> + ehrpwm3_tbclk: ehrpwm3_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-clock"; >>>> + clocks = <&ehrpwm3_gate_tbclk>; >>>> + }; >>>> + >>>> + ehrpwm4_gate_tbclk: ehrpwm4_gate_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-no-wait-gate-clock"; >>>> + clocks = <&dpll_per_m2_ck>; >>>> + ti,bit-shift = <2>; >>>> + reg = <0x0664>; >>>> + }; >>>> + >>>> + ehrpwm4_tbclk: ehrpwm4_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-clock"; >>>> + clocks = <&ehrpwm4_gate_tbclk>; >>>> + }; >>>> + >>>> + ehrpwm5_gate_tbclk: ehrpwm5_gate_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-no-wait-gate-clock"; >>>> + clocks = <&dpll_per_m2_ck>; >>>> + ti,bit-shift = <2>; >>>> + reg = <0x0664>; >>>> + }; >>>> + >>>> + ehrpwm5_tbclk: ehrpwm5_tbclk { >>>> + #clock-cells = <0>; >>>> + compatible = "ti,composite-clock"; >>>> + clocks = <&ehrpwm5_gate_tbclk>; >>>> + }; >>>> }; >>>> &prcm_clocks { >>>> clk_32768_ck: clk_32768_ck { >>>> diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c >>>> index 67c8de5..5413a6a 100644 >>>> --- a/drivers/clk/ti/clk-43xx.c >>>> +++ b/drivers/clk/ti/clk-43xx.c >>>> @@ -105,6 +105,12 @@ static struct ti_dt_clk am43xx_clks[] = { >>>> DT_CLK(NULL, "func_12m_clk", "func_12m_clk"), >>>> DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"), >>>> DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"), >>>> + DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), >>>> + DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), >>>> + DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), >>>> + DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), >>>> + DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), >>>> + DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), >>>> { .node_name = NULL }, >>>> }; >>>> >>>> >>> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 142009c..869f9a5 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -87,6 +87,90 @@ clock-mult = <1>; clock-div = <1>; }; + + ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <0>; + reg = <0x0664>; + }; + + ehrpwm0_tbclk: ehrpwm0_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ehrpwm0_gate_tbclk>; + }; + + ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + reg = <0x0664>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ehrpwm1_gate_tbclk>; + }; + + ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ehrpwm2_gate_tbclk>; + }; + + ehrpwm3_gate_tbclk: ehrpwm3_gate_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; + + ehrpwm3_tbclk: ehrpwm3_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ehrpwm3_gate_tbclk>; + }; + + ehrpwm4_gate_tbclk: ehrpwm4_gate_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; + + ehrpwm4_tbclk: ehrpwm4_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ehrpwm4_gate_tbclk>; + }; + + ehrpwm5_gate_tbclk: ehrpwm5_gate_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; + + ehrpwm5_tbclk: ehrpwm5_tbclk { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ehrpwm5_gate_tbclk>; + }; }; &prcm_clocks { clk_32768_ck: clk_32768_ck { diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c index 67c8de5..5413a6a 100644 --- a/drivers/clk/ti/clk-43xx.c +++ b/drivers/clk/ti/clk-43xx.c @@ -105,6 +105,12 @@ static struct ti_dt_clk am43xx_clks[] = { DT_CLK(NULL, "func_12m_clk", "func_12m_clk"), DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"), DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"), + DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), + DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), + DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), + DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm0_tbclk"), + DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm1_tbclk"), + DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm2_tbclk"), { .node_name = NULL }, };
We need "tblclk" clock data for the functioning of ehrpwm module. Hence, populating the required clock information in clock dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> --- arch/arm/boot/dts/am43xx-clocks.dtsi | 84 ++++++++++++++++++++++++++++++++++ drivers/clk/ti/clk-43xx.c | 6 +++ 2 files changed, 90 insertions(+)