diff mbox

[v2] ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU

Message ID 1398195639-29273-1-git-send-email-joelf@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Joel Fernandes April 22, 2014, 7:40 p.m. UTC 
On my DRA7 system, when the kernel is built in Thumb-2 mode, the secondary CPU
(Cortex A15) fails to come up causing SMP boot on second CPU to timeout. This
seems to be because the CPU is in ARM mode once the ROM hands over control to
the kernel.  Switch to Thumb-2 mode if required once the kernel is control of
secondary CPU. On OMAP4 on the other hand, it appears to be in Thumb-2 mode on
entry so this is not required and SMP boot works as is.

Also corrected a spurious '+' and updated copyright information.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
 arch/arm/mach-omap2/omap-headsmp.S |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Comments

Tony Lindgren April 25, 2014, 4:27 p.m. UTC | #1 
* Joel Fernandes <joelf@ti.com> [140422 12:41]:
> On my DRA7 system, when the kernel is built in Thumb-2 mode, the secondary CPU
> (Cortex A15) fails to come up causing SMP boot on second CPU to timeout. This
> seems to be because the CPU is in ARM mode once the ROM hands over control to
> the kernel.  Switch to Thumb-2 mode if required once the kernel is control of
> secondary CPU. On OMAP4 on the other hand, it appears to be in Thumb-2 mode on
> entry so this is not required and SMP boot works as is.
> 
> Also corrected a spurious '+' and updated copyright information.
> 
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Tested-by: Nishanth Menon <nm@ti.com>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: Joel Fernandes <joelf@ti.com>

Thanks applying into omap-for-v3.15/fixes-v2.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 75e9295..40c5d5f 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -1,7 +1,7 @@ 
 /*
  * Secondary CPU startup routine source file.
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009-2014 Texas Instruments, Inc.
  *
  * Author:
  *      Santosh Shilimkar <santosh.shilimkar@ti.com>
@@ -28,9 +28,13 @@ 
  * code.  This routine also provides a holding flag into which
  * secondary core is held until we're ready for it to initialise.
  * The primary core will update this flag using a hardware
-+ * register AuxCoreBoot0.
+ * register AuxCoreBoot0.
  */
 ENTRY(omap5_secondary_startup)
+.arm
+THUMB( adr     r9, BSYM(wait)  )       @ CPU may be entered in ARM mode.
+THUMB( bx      r9              )       @ If this is a Thumb-2 kernel,
+THUMB( .thumb                  )       @ switch to Thumb now.
 wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	ldr	r0, [r2]
 	mov	r0, r0, lsr #5