| Message ID | 1398268276-9696-8-git-send-email-antoine.tenart@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/23/2014 05:51 PM, Antoine Ténart wrote: > The uart0 pinmux configuration is in the dtsi because uart0 will always > use uart0-pmux to work, no other possibility. Same thing for uart1. > > Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> > --- > arch/arm/boot/dts/berlin2.dtsi | 24 ++++++++++++++++++++++++ > arch/arm/boot/dts/berlin2cd.dtsi | 17 +++++++++++++++++ > arch/arm/boot/dts/berlin2q.dtsi | 24 ++++++++++++++++++++++++ > 3 files changed, 65 insertions(+) > > diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi > index 56a1af2f1052..9a13891c38a3 100644 > --- a/arch/arm/boot/dts/berlin2.dtsi > +++ b/arch/arm/boot/dts/berlin2.dtsi > @@ -176,6 +176,11 @@ > }; > }; > > + soc_pinctrl: pin-controller@ea0000 { > + compatible = "marvell,berlin2-soc-pinctrl"; > + reg = <0xea0000 0x4c>; > + }; > + > apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -184,6 +189,21 @@ > ranges = <0 0xfc0000 0x10000>; > interrupt-parent = <&sic>; > > + sm_pinctrl: pin-controller@0000 { > + compatible = "marvell,berlin2-sysmgr-pinctrl"; > + reg = <0x0000 0x44>; > + > + uart0_pmux: uart0-pmux { > + marvell,groups = "GSM4"; > + marvell,function = "uart0"; > + }; > + > + uart1_pmux: uart1-pmux { > + marvell,groups = "GSM5"; > + marvell,function = "uart1"; > + }; There is three uarts in BG2, we have the node already. Please add uart2_pmux: uart2-pmux { marvell,groups = "GSM3"; marvell,function = "uart2"; }; here and in the corresponding node: pinctrl-0 = <&uart2_pmux>; pinctrl-names = "default"; Sebastian > + }; > + > uart0: serial@9000 { > compatible = "snps,dw-apb-uart"; > reg = <0x9000 0x100>; > @@ -191,6 +211,8 @@ > reg-io-width = <1>; > interrupts = <8>; > clocks = <&smclk>; > + pinctrl-0 = <&uart0_pmux>; > + pinctrl-names = "default"; > status = "disabled"; > }; > > @@ -201,6 +223,8 @@ > reg-io-width = <1>; > interrupts = <9>; > clocks = <&smclk>; > + pinctrl-0 = <&uart1_pmux>; > + pinctrl-names = "default"; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi > index 094968c27533..a802d3fe5da6 100644 > --- a/arch/arm/boot/dts/berlin2cd.dtsi > +++ b/arch/arm/boot/dts/berlin2cd.dtsi > @@ -169,6 +169,11 @@ > }; > }; > > + soc_pinctrl: pin-controller@ae0000 { > + compatible = "marvell,berlin2cd-soc-pinctrl"; > + reg = <0xea0000 0x4c>; > + }; > + > apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -177,6 +182,16 @@ > ranges = <0 0xfc0000 0x10000>; > interrupt-parent = <&sic>; > > + sm_pinctrl: pin-controller@0000 { > + compatible = "marvell,berlin2cd-sysmgr-pinctrl"; > + reg = <0x0000 0x44>; > + > + uart0_pmux: uart0-pmux { > + marvell,groups = "G6"; > + marvell,function = "uart0"; > + }; > + }; > + > uart0: serial@9000 { > compatible = "snps,dw-apb-uart"; > reg = <0x9000 0x100>; > @@ -184,6 +199,8 @@ > reg-io-width = <1>; > interrupts = <8>; > clocks = <&smclk>; > + pinctrl-0 = <&uart0_pmux>; > + pinctrl-names = "default"; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi > index 07452a7483fa..734debbf072f 100644 > --- a/arch/arm/boot/dts/berlin2q.dtsi > +++ b/arch/arm/boot/dts/berlin2q.dtsi > @@ -183,6 +183,11 @@ > }; > }; > > + soc_pinctrl: pin-controller@ea0000 { > + compatible = "marvell,berlin2q-soc-pinctrl"; > + reg = <0xea0000 0x4c>; > + }; > + > apb@fc0000 { > compatible = "simple-bus"; > #address-cells = <1>; > @@ -198,6 +203,8 @@ > interrupts = <8>; > clocks = <&smclk>; > reg-shift = <2>; > + pinctrl-0 = <&uart0_pmux>; > + pinctrl-names = "default"; > status = "disabled"; > }; > > @@ -208,9 +215,26 @@ > interrupts = <9>; > clocks = <&smclk>; > reg-shift = <2>; > + pinctrl-0 = <&uart1_pmux>; > + pinctrl-names = "default"; > status = "disabled"; > }; > > + sm_pinctrl: pin-controller@d000 { > + compatible = "marvell,berlin2q-sysmgr-pinctrl"; > + reg = <0xd000 0x44>; > + > + uart0_pmux: uart0-pmux { > + marvell,groups = "GSM12"; > + marvell,function = "uart0"; > + }; > + > + uart1_pmux: uart1-pmux { > + marvell,groups = "GSM14"; > + marvell,function = "uart1"; > + }; > + }; > + > sic: interrupt-controller@e000 { > compatible = "snps,dw-apb-ictl"; > reg = <0xe000 0x30>; >
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 56a1af2f1052..9a13891c38a3 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -176,6 +176,11 @@ }; }; + soc_pinctrl: pin-controller@ea0000 { + compatible = "marvell,berlin2-soc-pinctrl"; + reg = <0xea0000 0x4c>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -184,6 +189,21 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_pinctrl: pin-controller@0000 { + compatible = "marvell,berlin2-sysmgr-pinctrl"; + reg = <0x0000 0x44>; + + uart0_pmux: uart0-pmux { + marvell,groups = "GSM4"; + marvell,function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + marvell,groups = "GSM5"; + marvell,function = "uart1"; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; @@ -191,6 +211,8 @@ reg-io-width = <1>; interrupts = <8>; clocks = <&smclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -201,6 +223,8 @@ reg-io-width = <1>; interrupts = <9>; clocks = <&smclk>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 094968c27533..a802d3fe5da6 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -169,6 +169,11 @@ }; }; + soc_pinctrl: pin-controller@ae0000 { + compatible = "marvell,berlin2cd-soc-pinctrl"; + reg = <0xea0000 0x4c>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -177,6 +182,16 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_pinctrl: pin-controller@0000 { + compatible = "marvell,berlin2cd-sysmgr-pinctrl"; + reg = <0x0000 0x44>; + + uart0_pmux: uart0-pmux { + marvell,groups = "G6"; + marvell,function = "uart0"; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; @@ -184,6 +199,8 @@ reg-io-width = <1>; interrupts = <8>; clocks = <&smclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 07452a7483fa..734debbf072f 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -183,6 +183,11 @@ }; }; + soc_pinctrl: pin-controller@ea0000 { + compatible = "marvell,berlin2q-soc-pinctrl"; + reg = <0xea0000 0x4c>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -198,6 +203,8 @@ interrupts = <8>; clocks = <&smclk>; reg-shift = <2>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -208,9 +215,26 @@ interrupts = <9>; clocks = <&smclk>; reg-shift = <2>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; status = "disabled"; }; + sm_pinctrl: pin-controller@d000 { + compatible = "marvell,berlin2q-sysmgr-pinctrl"; + reg = <0xd000 0x44>; + + uart0_pmux: uart0-pmux { + marvell,groups = "GSM12"; + marvell,function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + marvell,groups = "GSM14"; + marvell,function = "uart1"; + }; + }; + sic: interrupt-controller@e000 { compatible = "snps,dw-apb-ictl"; reg = <0xe000 0x30>;
The uart0 pinmux configuration is in the dtsi because uart0 will always use uart0-pmux to work, no other possibility. Same thing for uart1. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> --- arch/arm/boot/dts/berlin2.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/berlin2cd.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/berlin2q.dtsi | 24 ++++++++++++++++++++++++ 3 files changed, 65 insertions(+)