| Message ID | 1397994525-18537-2-git-send-email-rahul.sharma@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote: > > From: Rahul Sharma <Rahul.Sharma@samsung.com> > > Display controller HPD Gpio line is board specific. This patch > is moving the pinctrl for hpd gpio line to the respective board > file. > > Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> > --- > arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 ------- > arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++ > 2 files changed, 7 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi > index e62c8eb..5848c42 100644 > --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi > +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi > @@ -59,13 +59,6 @@ > interrupt-controller; > #interrupt-cells = <2>; > }; > - > - dp_hpd: dp_hpd { > - samsung,pins = "gpx0-7"; > - samsung,pin-function = <3>; > - samsung,pin-pud = <0>; > - samsung,pin-drv = <0>; > - }; > }; (+cc Doug Anderson, Tomasz Figa) 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific. So, there should be "gpx0-7" part on chip specific dts file such as 'exynos5420-pinctrl.dtsi'. However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin. This is board specific. In my opinion, the following would look better. In this way, this patch is not necessary. 1. case: Standard HPD pin is used. (smdk5420) arch/arm/boot/dts/exynos5420-pinctrl.dts pinctrl@13400000 { dp_hpd: dp_hpd { samsung,pins = "gpx0-7"; samsung,pin-function = <3>; samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; arch/arm/boot/dts/exynos5420-smdk5420.dts dp-controller@145B0000 { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; ... 2. case: non-standard HPD pin such as GPIO is used. (peach pit) arch/arm/boot/dts/exynos5420-peach-pit.dts pinctrl@13400000 { dp_hpd: dp_hpd { samsung,pins = "gpx2-6"; samsung,pin-function = <0>; samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; dp-controller@145B0000 { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; ... samsung,hpd-gpio = <&gpx2 6 0>; Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts, 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6", respectively. A year ago, Doug Anderson and me agreed that standard HPD pin part should be included to 'exynos5250-pinctrl.dtsi'. (https://lkml.org/lkml/2013/5/11/134) Best regards, Jingoo Han > > pinctrl@13410000 { > diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts > index 6910485..62d38c8 100644 > --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > @@ -138,6 +138,13 @@ > samsung,pin-pud = <1>; > samsung,pin-drv = <0>; > }; > + > + dp_hpd: dp_hpd { > + samsung,pins = "gpx0-7"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > }; > > hdmi@14530000 { > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks Jingoo, On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote: > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote: >> >> From: Rahul Sharma <Rahul.Sharma@samsung.com> >> >> Display controller HPD Gpio line is board specific. This patch >> is moving the pinctrl for hpd gpio line to the respective board >> file. >> >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> >> --- >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 ------- >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++ >> 2 files changed, 7 insertions(+), 7 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> index e62c8eb..5848c42 100644 >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> @@ -59,13 +59,6 @@ >> interrupt-controller; >> #interrupt-cells = <2>; >> }; >> - >> - dp_hpd: dp_hpd { >> - samsung,pins = "gpx0-7"; >> - samsung,pin-function = <3>; >> - samsung,pin-pud = <0>; >> - samsung,pin-drv = <0>; >> - }; >> }; > > (+cc Doug Anderson, Tomasz Figa) > > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific. > So, there should be "gpx0-7" part on chip specific dts file such as > 'exynos5420-pinctrl.dtsi'. > > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin. > This is board specific. In my opinion, the following would look > better. In this way, this patch is not necessary. > > 1. case: Standard HPD pin is used. (smdk5420) > arch/arm/boot/dts/exynos5420-pinctrl.dts > pinctrl@13400000 { > dp_hpd: dp_hpd { > samsung,pins = "gpx0-7"; > samsung,pin-function = <3>; > samsung,pin-pud = <0>; > samsung,pin-drv = <0>; > }; > arch/arm/boot/dts/exynos5420-smdk5420.dts > dp-controller@145B0000 { > pinctrl-names = "default"; > pinctrl-0 = <&dp_hpd>; > ... > > > 2. case: non-standard HPD pin such as GPIO is used. (peach pit) > arch/arm/boot/dts/exynos5420-peach-pit.dts > pinctrl@13400000 { > dp_hpd: dp_hpd { > samsung,pins = "gpx2-6"; > samsung,pin-function = <0>; > samsung,pin-pud = <3>; > samsung,pin-drv = <0>; > }; > dp-controller@145B0000 { > pinctrl-names = "default"; > pinctrl-0 = <&dp_hpd>; > ... > samsung,hpd-gpio = <&gpx2 6 0>; > > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts, > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6", > respectively. > > A year ago, Doug Anderson and me agreed that standard HPD pin > part should be included to 'exynos5250-pinctrl.dtsi'. > (https://lkml.org/lkml/2013/5/11/134) > I wasn't aware of this discussion. It make sense. I will drop this patch. I need to choose some other name for this pin, say "peach_dp_hpd". Let me know if any concern. Regards, Rahul Sharma. > Best regards, > Jingoo Han > >> >> pinctrl@13410000 { >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> index 6910485..62d38c8 100644 >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> @@ -138,6 +138,13 @@ >> samsung,pin-pud = <1>; >> samsung,pin-drv = <0>; >> }; >> + >> + dp_hpd: dp_hpd { >> + samsung,pins = "gpx0-7"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> }; >> >> hdmi@14530000 { >> -- >> 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday, May 08, 2014 6:08 PM, Rahul Sharma wrote: > On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote: > > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote: > >> > >> From: Rahul Sharma <Rahul.Sharma@samsung.com> > >> > >> Display controller HPD Gpio line is board specific. This patch > >> is moving the pinctrl for hpd gpio line to the respective board > >> file. > >> > >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> > >> --- > >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 ------- > >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++ > >> 2 files changed, 7 insertions(+), 7 deletions(-) > >> > >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi > >> index e62c8eb..5848c42 100644 > >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi > >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi > >> @@ -59,13 +59,6 @@ > >> interrupt-controller; > >> #interrupt-cells = <2>; > >> }; > >> - > >> - dp_hpd: dp_hpd { > >> - samsung,pins = "gpx0-7"; > >> - samsung,pin-function = <3>; > >> - samsung,pin-pud = <0>; > >> - samsung,pin-drv = <0>; > >> - }; > >> }; > > > > (+cc Doug Anderson, Tomasz Figa) > > > > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific. > > So, there should be "gpx0-7" part on chip specific dts file such as > > 'exynos5420-pinctrl.dtsi'. > > > > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin. > > This is board specific. In my opinion, the following would look > > better. In this way, this patch is not necessary. > > > > 1. case: Standard HPD pin is used. (smdk5420) > > arch/arm/boot/dts/exynos5420-pinctrl.dts > > pinctrl@13400000 { > > dp_hpd: dp_hpd { > > samsung,pins = "gpx0-7"; > > samsung,pin-function = <3>; > > samsung,pin-pud = <0>; > > samsung,pin-drv = <0>; > > }; > > arch/arm/boot/dts/exynos5420-smdk5420.dts > > dp-controller@145B0000 { > > pinctrl-names = "default"; > > pinctrl-0 = <&dp_hpd>; > > ... > > > > > > 2. case: non-standard HPD pin such as GPIO is used. (peach pit) > > arch/arm/boot/dts/exynos5420-peach-pit.dts > > pinctrl@13400000 { > > dp_hpd: dp_hpd { > > samsung,pins = "gpx2-6"; > > samsung,pin-function = <0>; > > samsung,pin-pud = <3>; > > samsung,pin-drv = <0>; > > }; > > dp-controller@145B0000 { > > pinctrl-names = "default"; > > pinctrl-0 = <&dp_hpd>; > > ... > > samsung,hpd-gpio = <&gpx2 6 0>; > > > > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts, > > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6", > > respectively. > > > > A year ago, Doug Anderson and me agreed that standard HPD pin > > part should be included to 'exynos5250-pinctrl.dtsi'. > > (https://lkml.org/lkml/2013/5/11/134) > > > > I wasn't aware of this discussion. It make sense. I will drop this patch. > I need to choose some other name for this pin, say "peach_dp_hpd". > Let me know if any concern. In my opinion, "dp_hpd_gpio" looks better as below. arch/arm/boot/dts/exynos5420-peach-pit.dts pinctrl@13400000 { dp_hpd_gpio: dp_hpd_gpio { samsung,pins = "gpx2-6"; samsung,pin-function = <0>; samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; dp-controller@145B0000 { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd_gpio>; ... samsung,hpd-gpio = <&gpx2 6 0>; Best regards, Jingoo Han > > Regards, > Rahul Sharma. > > > Best regards, > > Jingoo Han > > > >> > >> pinctrl@13410000 { > >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> index 6910485..62d38c8 100644 > >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts > >> @@ -138,6 +138,13 @@ > >> samsung,pin-pud = <1>; > >> samsung,pin-drv = <0>; > >> }; > >> + > >> + dp_hpd: dp_hpd { > >> + samsung,pins = "gpx0-7"; > >> + samsung,pin-function = <3>; > >> + samsung,pin-pud = <0>; > >> + samsung,pin-drv = <0>; > >> + }; > >> }; > >> > >> hdmi@14530000 { > >> -- > >> 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 9 May 2014 06:15, Jingoo Han <jg1.han@samsung.com> wrote: > On Thursday, May 08, 2014 6:08 PM, Rahul Sharma wrote: >> On 8 May 2014 12:02, Jingoo Han <jg1.han@samsung.com> wrote: >> > On Sunday, April 20, 2014 8:49 PM, Rahul Sharma wrote: >> >> >> >> From: Rahul Sharma <Rahul.Sharma@samsung.com> >> >> >> >> Display controller HPD Gpio line is board specific. This patch >> >> is moving the pinctrl for hpd gpio line to the respective board >> >> file. >> >> >> >> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> >> >> --- >> >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 ------- >> >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 +++++++ >> >> 2 files changed, 7 insertions(+), 7 deletions(-) >> >> >> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> >> index e62c8eb..5848c42 100644 >> >> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> >> @@ -59,13 +59,6 @@ >> >> interrupt-controller; >> >> #interrupt-cells = <2>; >> >> }; >> >> - >> >> - dp_hpd: dp_hpd { >> >> - samsung,pins = "gpx0-7"; >> >> - samsung,pin-function = <3>; >> >> - samsung,pin-pud = <0>; >> >> - samsung,pin-drv = <0>; >> >> - }; >> >> }; >> > >> > (+cc Doug Anderson, Tomasz Figa) >> > >> > 'gpx0-7' pin is assigned for standard HPD pin. This is chip specific. >> > So, there should be "gpx0-7" part on chip specific dts file such as >> > 'exynos5420-pinctrl.dtsi'. >> > >> > However, some boards use GPIO as HPD pin, instead of 'gpx0-7' pin. >> > This is board specific. In my opinion, the following would look >> > better. In this way, this patch is not necessary. >> > >> > 1. case: Standard HPD pin is used. (smdk5420) >> > arch/arm/boot/dts/exynos5420-pinctrl.dts >> > pinctrl@13400000 { >> > dp_hpd: dp_hpd { >> > samsung,pins = "gpx0-7"; >> > samsung,pin-function = <3>; >> > samsung,pin-pud = <0>; >> > samsung,pin-drv = <0>; >> > }; >> > arch/arm/boot/dts/exynos5420-smdk5420.dts >> > dp-controller@145B0000 { >> > pinctrl-names = "default"; >> > pinctrl-0 = <&dp_hpd>; >> > ... >> > >> > >> > 2. case: non-standard HPD pin such as GPIO is used. (peach pit) >> > arch/arm/boot/dts/exynos5420-peach-pit.dts >> > pinctrl@13400000 { >> > dp_hpd: dp_hpd { >> > samsung,pins = "gpx2-6"; >> > samsung,pin-function = <0>; >> > samsung,pin-pud = <3>; >> > samsung,pin-drv = <0>; >> > }; >> > dp-controller@145B0000 { >> > pinctrl-names = "default"; >> > pinctrl-0 = <&dp_hpd>; >> > ... >> > samsung,hpd-gpio = <&gpx2 6 0>; >> > >> > Even though, there is 'dp_hpd' in exynos5420-pinctrl.dts, >> > 'smdk5420' and 'peach pit' can use "gpx0-7" and "gpx2-6", >> > respectively. >> > >> > A year ago, Doug Anderson and me agreed that standard HPD pin >> > part should be included to 'exynos5250-pinctrl.dtsi'. >> > (https://lkml.org/lkml/2013/5/11/134) >> > >> >> I wasn't aware of this discussion. It make sense. I will drop this patch. >> I need to choose some other name for this pin, say "peach_dp_hpd". >> Let me know if any concern. > > In my opinion, "dp_hpd_gpio" looks better as below. > > arch/arm/boot/dts/exynos5420-peach-pit.dts > pinctrl@13400000 { > dp_hpd_gpio: dp_hpd_gpio { > samsung,pins = "gpx2-6"; > samsung,pin-function = <0>; > samsung,pin-pud = <3>; > samsung,pin-drv = <0>; > }; > dp-controller@145B0000 { > pinctrl-names = "default"; > pinctrl-0 = <&dp_hpd_gpio>; > ... > samsung,hpd-gpio = <&gpx2 6 0>; Ok. > > Best regards, > Jingoo Han > >> >> Regards, >> Rahul Sharma. >> >> > Best regards, >> > Jingoo Han >> > >> >> >> >> pinctrl@13410000 { >> >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> >> index 6910485..62d38c8 100644 >> >> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> >> @@ -138,6 +138,13 @@ >> >> samsung,pin-pud = <1>; >> >> samsung,pin-drv = <0>; >> >> }; >> >> + >> >> + dp_hpd: dp_hpd { >> >> + samsung,pins = "gpx0-7"; >> >> + samsung,pin-function = <3>; >> >> + samsung,pin-pud = <0>; >> >> + samsung,pin-drv = <0>; >> >> + }; >> >> }; >> >> >> >> hdmi@14530000 { >> >> -- >> >> 1.7.9.5 >> > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index e62c8eb..5848c42 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -59,13 +59,6 @@ interrupt-controller; #interrupt-cells = <2>; }; - - dp_hpd: dp_hpd { - samsung,pins = "gpx0-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; }; pinctrl@13410000 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 6910485..62d38c8 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -138,6 +138,13 @@ samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; hdmi@14530000 {