[PATCHv4,7/7] ARM: dts: Add device tree sources for Exynos3250

Message ID	1398388572-30239-8-git-send-email-cw00.choi@samsung.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Chanwoo Choi <cw00.choi@samsung.com> To: kgene.kim@samsung.com, t.figa@samsung.com Subject: [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250 Date: Fri, 25 Apr 2014 10:16:12 +0900 Message-id: <1398388572-30239-8-git-send-email-cw00.choi@samsung.com> In-reply-to: <1398388572-30239-1-git-send-email-cw00.choi@samsung.com> References: <1398388572-30239-1-git-send-email-cw00.choi@samsung.com> DLP-Filter: Pass Cc: Mark Rutland <mark.rutland@arm.com>, tushar.behera@linaro.org, sajjan.linux@gmail.com, linux-samsung-soc@vger.kernel.org, linux@arm.linux.org.uk, Pawel Moll <pawel.moll@arm.com>, sachin.kamat@linaro.org, Ian Campbell <ijc+devicetree@hellion.org.uk>, Jaehoon Chung <jh80.chung@samsung.com>, cw00.choi@samsung.com, thomas.abraham@linaro.org, devicetree@vger.kernel.org, arnd@arndb.de, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, marc.zyngier@arm.com, inki.dae@samsung.com, Rob Herring <robh+dt@kernel.org>, ben-linux@fluff.org, linux-arm-kernel@lists.infradead.org, hyunhee.kim@samsung.com, sw0312.kim@samsung.com, linux-kernel@vger.kernel.org, yj44.cho@samsung.com, kyungmin.park@samsung.com, Kumar Gala <galak@codeaurora.org>, olof@lixom.net, chanho61.park@samsung.com Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

Hi Tomasz, On 04/26/2014 09:51 AM, Tomasz Figa wrote: > Hi Chanwoo, > > On 25.04.2014 03:16, Chanwoo Choi wrote: >> From: Tomasz Figa <t.figa@samsung.com> >> >> This patch add new exynos3250.dtsi to support Exynos3250 SoC based on Cortex-A7 >> dual core and includes following dt nodes: >> >> - GIC interrupt controller >> - Pinctrl to control GPIOs >> - Clock controller >> - CPU information (Cortex-A7 dual core) >> - UART to support serial port >> - MCT (Multi Core Timer) >> - ADC (Analog Digital Converter) >> - I2C/SPI bus >> - Power domain >> - PMU (Performance Monitoring Unit) >> - MSHC (Mobile Storage Host Controller) >> - PWM (Pluse Width Modulation) >> - AMBA bus >> >> Signed-off-by: Tomasz Figa <t.figa@samsung.com> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> >> Signed-off-by: Inki Dae <inki.dae@samsung.com> >> Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> >> Cc: Ben Dooks <ben-linux@fluff.org> >> Cc: Kukjin Kim <kgene.kim@samsung.com> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Pawel Moll <pawel.moll@arm.com> >> Cc: Mark Rutland <mark.rutland@arm.com> >> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> >> Cc: Kumar Gala <galak@codeaurora.org> >> Cc: Russell King <linux@arm.linux.org.uk> >> Cc: devicetree@vger.kernel.org >> --- >> arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++++ >> arch/arm/boot/dts/exynos3250.dtsi | 405 +++++++++++++ >> arch/arm/boot/dts/exynos4212-tizenw.dts | 926 ++++++++++++++++++++++++++++++ >> 3 files changed, 1808 insertions(+) >> create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi >> create mode 100644 arch/arm/boot/dts/exynos3250.dtsi >> create mode 100644 arch/arm/boot/dts/exynos4212-tizenw.dts >> >> diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi >> new file mode 100644 >> index 0000000..976490b >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi >> @@ -0,0 +1,477 @@ >> +/* >> + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source >> + * >> + * Copyright (c) 2014 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device >> + * tree nodes are listed in this file. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +/ { >> + pinctrl@11400000 { > > Could you use references instead of re-specifying the whole tree hierarchy in every file a node is used? > > Instead of > > / { > pinctrl@11400000 { > > }; > }; > > one may simply use > > &pinctrl_0 { > > }; > > You might just need to change the location of #include "exynos3250-pinctrl.dtsi" from top of exynos3250.dtsi to bottom of it. > OK, I'll change it. >> + gpa0: gpa0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa1: gpa1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb: gpb { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc0: gpc0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc1: gpc1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd0: gpd0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd1: gpd1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + uart0_data: uart0-data { >> + samsung,pins = "gpa0-0", "gpa0-1"; >> + samsung,pin-function = <0x2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart0_fctl: uart0-fctl { >> + samsung,pins = "gpa0-2", "gpa0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_data: uart1-data { >> + samsung,pins = "gpa0-4", "gpa0-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_fctl: uart1-fctl { >> + samsung,pins = "gpa0-6", "gpa0-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c2_bus: i2c2-bus { >> + samsung,pins = "gpa0-6", "gpa0-7"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c3_bus: i2c3-bus { >> + samsung,pins = "gpa1-2", "gpa1-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi0_bus: spi0-bus { >> + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c4_bus: i2c4-bus { >> + samsung,pins = "gpb-0", "gpb-1"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi1_bus: spi1-bus { >> + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c5_bus: i2c5-bus { >> + samsung,pins = "gpb-2", "gpb-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2s2_bus: i2s2-bus { >> + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", >> + "gpc1-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pcm2_bus: pcm2-bus { >> + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", >> + "gpc1-4"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c6_bus: i2c6-bus { >> + samsung,pins = "gpc1-3", "gpc1-4"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm0_out: pwm0-out { >> + samsung,pins = "gpd0-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm1_out: pwm1-out { >> + samsung,pins = "gpd0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c7_bus: i2c7-bus { >> + samsung,pins = "gpd0-2", "gpd0-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm2_out: pwm2-out { >> + samsung,pins = "gpd0-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pwm3_out: pwm3-out { >> + samsung,pins = "gpd0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c0_bus: i2c0-bus { >> + samsung,pins = "gpd1-0", "gpd1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + mipi0_clk: mipi0-clk { >> + samsung,pins = "gpd1-0", "gpd1-1"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c1_bus: i2c1-bus { >> + samsung,pins = "gpd1-2", "gpd1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + }; >> + >> + pinctrl@11000000 { >> + gpe0: gpe0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpe1: gpe1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpe2: gpe2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpk0: gpk0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpk1: gpk1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpk2: gpk2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpl0: gpl0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpm0: gpm0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpm1: gpm1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpm2: gpm2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpm3: gpm3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpm4: gpm4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx0: gpx0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + interrupt-parent = <&gic>; >> + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, >> + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx1: gpx1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + interrupt-parent = <&gic>; >> + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, >> + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx2: gpx2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx3: gpx3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + sd0_clk: sd0-clk { >> + samsung,pins = "gpk0-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_cmd: sd0-cmd { >> + samsung,pins = "gpk0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_cd: sd0-cd { >> + samsung,pins = "gpk0-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_rdqs: sd0-rdqs { >> + samsung,pins = "gpk0-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus1: sd0-bus-width1 { >> + samsung,pins = "gpk0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus4: sd0-bus-width4 { >> + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus8: sd0-bus-width8 { >> + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_clk: sd1-clk { >> + samsung,pins = "gpk1-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_cmd: sd1-cmd { >> + samsung,pins = "gpk1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_cd: sd1-cd { >> + samsung,pins = "gpk1-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus1: sd1-bus-width1 { >> + samsung,pins = "gpk1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus4: sd1-bus-width4 { >> + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + cam_port_b_io: cam-port-b-io { >> + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", >> + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", >> + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_port_b_clk_active: cam-port-b-clk-active { >> + samsung,pins = "gpm2-2"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + cam_port_b_clk_idle: cam-port-b-clk-idle { >> + samsung,pins = "gpm2-2"; >> + samsung,pin-function = <0>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_i2c0: fimc-is-i2c0 { >> + samsung,pins = "gpm4-0", "gpm4-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_i2c1: fimc-is-i2c1 { >> + samsung,pins = "gpm4-2", "gpm4-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + fimc_is_uart: fimc-is-uart { >> + samsung,pins = "gpm3-5", "gpm3-7"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + }; >> +}; >> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi >> new file mode 100644 >> index 0000000..5be3dd3 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos3250.dtsi >> @@ -0,0 +1,405 @@ >> +/* >> + * Samsung's Exynos3250 SoC device tree source >> + * >> + * Copyright (c) 2014 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 >> + * based board files can include this file and provide values for board specfic >> + * bindings. >> + * >> + * Note: This file does not include device nodes for all the controllers in >> + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional >> + * nodes can be added to this file. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include "skeleton.dtsi" >> +#include "exynos3250-pinctrl.dtsi" >> +#include <dt-bindings/clock/exynos3250.h> >> + >> +/ { >> + compatible = "samsung,exynos3250"; >> + interrupt-parent = <&gic>; >> + >> + aliases { >> + pinctrl0 = &pinctrl_0; >> + pinctrl1 = &pinctrl_1; >> + mshc0 = &mshc_0; >> + mshc1 = &mshc_1; >> + spi0 = &spi_0; >> + spi1 = &spi_1; >> + i2c0 = &i2c_0; >> + i2c1 = &i2c_1; >> + i2c2 = &i2c_2; >> + i2c3 = &i2c_3; >> + i2c4 = &i2c_4; >> + i2c5 = &i2c_5; >> + i2c6 = &i2c_6; >> + i2c7 = &i2c_7; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a7"; >> + reg = <0>; >> + clock-frequency = <1000000000>; >> + }; > > Why only one CPU? I believe Exynos3250 is dual core. I'll add cpu1 information. > Also are physical IDs of the cores really 0 and 1? On Exynos4210 for example they are 0x900 and 0x901, while on Exynos4212 they are 0xa00 and 0xa01. Please check this. The 'reg' property means only hardware id(hwid) of CPU. You can check it on arm_dt_init_cpu_maps() in arch/arm/kernel/devtree.c.h. or Documentation/devicetree/bindings/arm/cpus.txt. >> + }; >> + >> + fixed-rate-clocks { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + xusbxti: clock@0 { >> + compatible = "fixed-clock"; >> + reg = <0>; >> + clock-frequency = <0>; >> + #clock-cells = <0>; >> + clock-output-names = "xusbxti"; >> + }; >> + >> + xxti: clock@1 { >> + compatible = "fixed-clock"; >> + reg = <1>; >> + clock-frequency = <0>; >> + #clock-cells = <0>; >> + clock-output-names = "xxti"; >> + }; >> + >> + xtcxo: clock@2 { >> + compatible = "fixed-clock"; >> + reg = <2>; >> + clock-frequency = <0>; >> + #clock-cells = <0>; >> + clock-output-names = "xtcxo"; >> + }; >> + }; >> + >> + chipid@10000000 { >> + compatible = "samsung,exynos4210-chipid"; >> + reg = <0x10000000 0x100>; >> + }; >> + >> + sys_reg: syscon@10010000 { >> + compatible = "samsung,exynos3-sysreg", "syscon"; >> + reg = <0x10010000 0x400>; >> + }; >> + >> + pd_cam: cam-power-domain@10023C00 { >> + compatible = "samsung,exynos4210-pd"; >> + reg = <0x10023C00 0x20>; >> + }; >> + >> + pd_mfc: mfc-power-domain@10023C40 { >> + compatible = "samsung,exynos4210-pd"; >> + reg = <0x10023C40 0x20>; >> + }; >> + >> + pd_g3d: g3d-power-domain@10023C60 { >> + compatible = "samsung,exynos4210-pd"; >> + reg = <0x10023C60 0x20>; >> + }; >> + >> + pd_lcd0: lcd0-power-domain@10023C80 { >> + compatible = "samsung,exynos4210-pd"; >> + reg = <0x10023C80 0x20>; >> + }; >> + >> + pd_isp: isp-power-domain@10023CA0 { >> + compatible = "samsung,exynos4210-pd"; >> + reg = <0x10023CA0 0x20>; >> + }; >> + >> + cmu: clock-controller@10030000 { >> + compatible = "samsung,exynos3250-cmu"; >> + reg = <0x10030000 0x20000>; >> + #clock-cells = <1>; >> + }; >> + >> + rtc@10070000 { > > Please add label to the node, so it can be referenced from board dts files added later (using the method I explained above). OK, I'll add lable as following: rtc_0: rtc@10070000 { > >> + compatible = "samsung,s3c6410-rtc"; >> + reg = <0x10070000 0x100>; >> + interrupts = <0 73 0>, <0 74 0>; >> + status = "disabled"; >> + }; >> + >> + gic: interrupt-controller@10481000 { >> + compatible = "arm,cortex-a15-gic"; >> + #interrupt-cells = <3>; >> + interrupt-controller; >> + reg = <0x10481000 0x1000>, >> + <0x10482000 0x1000>, >> + <0x10484000 0x2000>, >> + <0x10486000 0x2000>; >> + interrupts = <1 9 0xf04>; >> + }; >> + >> + mct@10050000 { >> + compatible = "samsung,exynos4210-mct"; >> + reg = <0x10050000 0x800>; >> + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, >> + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; >> + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; >> + clock-names = "fin_pll", "mct"; >> + }; >> + >> + pinctrl_1: pinctrl@11000000 { >> + compatible = "samsung,exynos3250-pinctrl"; >> + reg = <0x11000000 0x1000>; >> + interrupts = <0 225 0>; >> + >> + wakeup-interrupt-controller { >> + compatible = "samsung,exynos4210-wakeup-eint"; >> + interrupt-parent = <&gic>; >> + interrupts = <0 48 0>; >> + }; >> + }; >> + >> + pinctrl_0: pinctrl@11400000 { >> + compatible = "samsung,exynos3250-pinctrl"; >> + reg = <0x11400000 0x1000>; >> + interrupts = <0 240 0>; >> + }; >> + >> + mshc_0: mshc@12510000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12510000 0x1000>; >> + interrupts = <0 142 0>; >> + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x80>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + mshc_1: mshc@12520000 { >> + compatible = "samsung,exynos5250-dw-mshc"; >> + reg = <0x12520000 0x1000>; >> + interrupts = <0 143 0>; >> + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; >> + clock-names = "biu", "ciu"; >> + fifo-depth = <0x80>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + amba { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "arm,amba-bus"; >> + interrupt-parent = <&gic>; >> + ranges; >> + >> + pdma0: pdma@12680000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x12680000 0x1000>; >> + interrupts = <0 138 0>; >> + clocks = <&cmu CLK_PDMA0>; >> + clock-names = "apb_pclk"; >> + #dma-cells = <1>; >> + #dma-channels = <8>; >> + #dma-requests = <32>; >> + }; >> + >> + pdma1: pdma@12690000 { >> + compatible = "arm,pl330", "arm,primecell"; >> + reg = <0x12690000 0x1000>; >> + interrupts = <0 139 0>; >> + clocks = <&cmu CLK_PDMA1>; >> + clock-names = "apb_pclk"; >> + #dma-cells = <1>; >> + #dma-channels = <8>; >> + #dma-requests = <32>; >> + }; >> + }; >> + >> + adc: adc@126C0000 { >> + compatible = "samsung,exynos-adc-v3"; >> + reg = <0x126C0000 0x100>, <0x10020718 0x4>; >> + interrupts = <0 137 0>; >> + clock-names = "adc", "sclk_tsadc"; >> + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; >> + #io-channel-cells = <1>; >> + io-channel-ranges; >> + status = "disabled"; >> + }; >> + >> + serial@13800000 { > > Please add label. OK, I'll add lable as following: serial_0: serial@13800000 { > >> + compatible = "samsung,exynos4210-uart"; >> + reg = <0x13800000 0x100>; >> + interrupts = <0 109 0>; >> + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; >> + clock-names = "uart", "clk_uart_baud0"; >> + status = "disabled"; >> + }; >> + >> + serial@13810000 { OK, I'll add lable as following: serial_1: serial@13800000 { Thanks for your review. Best regards, Chanwoo Choi

diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi new file mode 100644 index 0000000..976490b --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -0,0 +1,477 @@ +/* + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@11000000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpk0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi new file mode 100644 index 0000000..5be3dd3 --- /dev/null +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -0,0 +1,405 @@ +/* + * Samsung's Exynos3250 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include "exynos3250-pinctrl.dtsi" +#include <dt-bindings/clock/exynos3250.h> + +/ { + compatible = "samsung,exynos3250"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + spi0 = &spi_0; + spi1 = &spi_1; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + }; + + fixed-rate-clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + xusbxti: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; + + xxti: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; + + xtcxo: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; + }; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + sys_reg: syscon@10010000 { + compatible = "samsung,exynos3-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos3250-cmu"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 73 0>, <0 74 0>; + status = "disabled"; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 225 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 48 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 240 0>; + }; + + mshc_0: mshc@12510000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12510000 0x1000>; + interrupts = <0 142 0>; + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mshc_1: mshc@12520000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12520000 0x1000>; + interrupts = <0 143 0>; + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 138 0>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 139 0>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v3"; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + clock-names = "adc", "sclk_tsadc"; + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 110 0>; + clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + i2c_0: i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 113 0>; + clocks = <&cmu CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 114 0>; + clocks = <&cmu CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 115 0>; + clocks = <&cmu CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 116 0>; + clocks = <&cmu CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + i2c_4: i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 117 0>; + clocks = <&cmu CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; + + i2c_5: i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 118 0>; + clocks = <&cmu CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; + + i2c_6: i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 119 0>; + clocks = <&cmu CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; + + i2c_7: i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 120 0>; + clocks = <&cmu CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 121 0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 122 0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "disabled"; + }; + + pwm: pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 108 0>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <0 18 0>, <0 19 0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4212-tizenw.dts b/arch/arm/boot/dts/exynos4212-tizenw.dts new file mode 100644 index 0000000..aed7060 --- /dev/null +++ b/arch/arm/boot/dts/exynos4212-tizenw.dts @@ -0,0 +1,926 @@ +/* + * Samsung's Exynos4212 based Tizen-W board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Tizen-W board which is based on + * Samsung's Exynos4212 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4212.dtsi" + +/ { + model = "Samsung Tizen-W board based on Exynos4212"; + compatible = "samsung,tizen-w"; + + aliases { + /* 15...16 reserved for i2c0_isp, i2c1_isp */ + i2c16 = &i2c1_isp; + }; + + memory { + reg = <0x40000000 0x08000000 + 0x48000000 0x08000000 + 0x50000000 0x08000000 + 0x58000000 0x07F00000>; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + + contig_mem: region@48000000 { + compatible = "linux,contiguous-memory-region"; + reg = <0x48000000 0x1000000>; + linux,default-contiguous-region; + }; + }; + }; + + chosen { + bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + }; + + pinctrl@11000000 { + cam-port-b-clk-active { + samsung,pin-drv = <2>; + }; + }; + + firmware@0204F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + vemmc_reg: voltage-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 0>; + enable-active-high; + }; + + rtc@10070000 { + status = "okay"; + }; + + mshc@12550000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + non-removable; + caps-mmc-erase; + fifo-depth = <0x80>; + card-detect-delay = <200>; + clocks = <&clock 301>, <&clock 149>; + clock-names = "biu", "ciu"; + vmmc-supply = <&vemmc_reg>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + adc: adc@126C0000 { + vdd-supply = <&ldo3_reg>; + status = "okay"; + + ncp15wb473@0 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; /* VCC_1.8V_AP */ + pullup-ohm = <100000>; /* 100K */ + pulldown-ohm = <100000>; /* 100K */ + io-channels = <&adc 1>; /* AP temperature */ + }; + + ncp15wb473@1 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; /* VCC_1.8V_AP */ + pullup-ohm = <100000>; /* 100K */ + pulldown-ohm = <100000>; /* 100K */ + io-channels = <&adc 2>; /* Battery temperature */ + }; + }; + + serial@13800000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data &uart0_fctl>; + status = "okay"; + }; + + serial@13810000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>; + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + cpufreq { + freq_table = <0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF + 0xFFFFFFFF 0xFFFFFFFF 800000 700000 600000 + 500000 400000 300000 200000 100000>; + vdd_arm-supply = <&buck2_reg>; + status = "okay"; + }; + + busfreq { + compatible = "samsung,exynos4x12-busfreq"; + vdd_int-supply = <&buck3_reg>; + vdd_mif-supply = <&buck1_reg>; + user-max-freq = <133000>; + status = "okay"; + }; + + gpio-keys@0 { + compatible = "gpio-keys"; + + key@116 { + interrupt-parent = <&gpx2>; + interrupts = <7 0>; + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + haptic { + compatible = "linux,regulator-haptic"; + haptic-supply = <&ldo20_reg>; + min-microvolt = <1100000>; + max-microvolt = <2000000>; + }; + + sec_reboot@ { + compatible = "samsung,sec-reboot"; + power-gpio = <&gpx2 7 0>; + extcon = <&muic>; + }; + + charger-manager@ { + compatible = "charger-manager"; + + psy-name = "battery"; + + polling-mode = <1>; /* Polling external power */ + polling-interval-ms = <30000>; /* Polling period */ + + fullbatt-uV = <4300>; + fullbatt-soc = <100>; + fullbatt-full-capacity = <0>; + fullbatt-vchkdrop-ms = <30000>; + fullbatt-vchkdrop-uV = <500>; + + battery-present = <3>; /* CM_CHARGER_STAT */ + + charging-max-duration-minute = <360>; + discharging-max-duration-minute = <90>; + + psy-fuelgauge-name = "max17040"; + + measure-battery-temp; + measure-battery-temp-type = <2>; /* Read temp from hwmon */ + + io-channels = <&adc 2>; + iio-adc-overheat = <2500>; + iio-adc-cold = <0>; + + hwmon-name = "ncp15wb473.13"; /* Battery temperature*/ + hwmon-property = "temp1_input"; + hwmon-milli-centigrade-overheat = <45000>; + hwmon-milli-centigrade-cold = <5000>; /* minus value */ + vinchg1-supply = <&charger_reg>; + + psy-chargers { + psy-charger-max14577 { + psy-charger-name = "max14577-charger"; + }; + }; + + charger-regulators { + charger-vinchg1 { + regulator-name = "vinchg1"; + charger-cables { + cable-USB { + cable-name = "USB"; + extcon-name = "max14577-muic"; + min-current-uA = <475000>; + max-current-uA = <500000>; + }; + + cable-TA { + cable-name = "TA"; + extcon-name = "max14577-muic"; + min-current-uA = <475000>; + max-current-uA = <500000>; + }; + }; + }; + }; + }; + + i2c@13870000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c1_bus>; + pinctrl-names = "default"; + status = "okay"; + + fuel-gauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + interrupt-parent = <&gpx1>; + interrupts = <2 8>; + }; + }; + + i2c@13880000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c2_bus>; + pinctrl-names = "default"; + status = "okay"; + + max14577@25 { + compatible = "maxim,max14577"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + + muic: max14577-muic { + compatible = "maxim,max14577-muic"; + }; + regulators { + compatible = "maxim,max14577-regulator"; + safeout_reg: SAFEOUT@1 { + regulator-name = "SAFEOUT"; + }; + charger_reg: CHARGER@0 { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + }; + }; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen-mms128@48 { + compatible = "melfas,mms128"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 2>; + max_x = <320>; + max_y = <320>; + invert_x = <0>; + invert_y = <0>; + gpios = <&gpm2 3 2>, + <&gpa1 2 0>, + <&gpa1 3 0>; + tsp_vendor = "MELFAS"; + tsp_ic = "MMS128S"; + tsp_tx = <7>; + tsp_rx = <7>; + config_fw_version = "V700_ME_0910"; + tsp_avdd_3.3v-supply = <&ldo21_reg>; + tsp_vdd_1.8v-supply = <&ldo25_reg>; + }; + }; + + i2c@138D0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + interrupt-parent = <&gpx0>; + interrupts = <7 0>; + reg = <0x66>; + + s5m8767,pmic-buck2-ramp-enable; + s5m8767,pmic-buck3-ramp-enable; + s5m8767,pmic-buck4-ramp-enable; + s5m8767,pmic-buck-ramp-delay = <25>; + + s5m8767,pmic-buck-ds-gpios = <&gpf0 5 0>, + <&gpx2 0 0>, + <&gpx2 1 0>; + wakeup; + + s5m8767_osc: clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", + "s5m8767_cp", "s5m8767_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo3_reg: LDO3 { + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo5_reg: LDO5 { + regulator-name = "UNUSED_LDO5"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <0>; /* Always OFF */ + }; + + ldo6_reg: LDO6 { + regulator-name = "VMPLL_1.1V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo7_reg: LDO7 { + regulator-name = "VPLL_1.1V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; /* Standby Mode */ + }; + + ldo8_reg: LDO8 { + regulator-name = "VMIPI_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + op_mode = <3>; /* Standby Mode */ + }; + + ldo9_reg: LDO9 { + regulator-name = "UNUSED_LDO9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <0>; /* Always OFF */ + }; + + ldo10_reg: LDO10 { + regulator-name = "VMIPI_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <3>; /* Standby Mode */ + }; + + ldo11_reg: LDO11 { + regulator-name = "VABB1_1.95V_AP"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + op_mode = <3>; /* Standby Mode */ + }; + + ldo12_reg: LDO12 { + regulator-name = "VUOTG_3.0V_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo13_reg: LDO13 { + regulator-name = "UNUSED_LDO13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <0>; /* Always OFF */ + }; + + ldo14_reg: LDO14 { + regulator-name = "VABB02_1.95V_AP"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + op_mode = <3>; /* Standby Mode */ + }; + + ldo15_reg: LDO15 { + regulator-name = "VHSIC_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo16_reg: LDO16 { + regulator-name = "VHSIC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_AP_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo19_reg: LDO19 { + regulator-name = "CAM_AF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <3>; /* Standby Mode */ + }; + + ldo20_reg: LDO20 { + regulator-name = "VDD_MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + op_mode = <3>; /* Standby Mode */ + }; + + ldo21_reg: LDO21 { + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo22_reg: LDO22 { + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo24_reg: LDO24 { + regulator-name = "CAM_SENSOR_A2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <3>; /* Standby Mode */ + }; + + ldo25_reg: LDO25 { + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo26_reg: LDO26 { + regulator-name = "VCC_1.8V_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo27_reg: LDO27 { + regulator-name = "CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <3>; /* Standby Mode */ + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <3>; /* Standby Mode */ + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + op_mode = <3>; /* Standby Mode */ + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <3>; /* Standby Mode */ + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1075000>; + op_mode = <3>; /* Standby Mode */ + }; + + buck5_reg: BUCK5 { + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck6_reg: BUCK6 { + regulator-name = "UNUSED_BUCK6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + op_mode = <0>; /* Always OFF */ + }; + + buck7_reg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + op_mode = <3>; /* Standby Mode */ + }; + + buck8_reg: BUCK8 { + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + op_mode = <3>; /* Standby Mode */ + }; + }; + }; + + s5m8767_rtc@ { + compatible = "samsung,s5m8767-rtc"; + }; + }; + + spi_0: spi@13920000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "okay"; + + ymu831: ymu831-spi { + compatible = "yamaha,ymu831"; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpx1>; + interrupts = <4 0>; + reg = <0x0>; + codec-en-gpios = <&gpx3 6 0>; + controller-data { + cs-gpio = <&gpb 1 0>; + samsung,spi-feedback-delay = <2>; + }; + }; + }; + + spi_1: spi@13930000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "okay"; + spi-cpha; + + shub_spi: shub { + compatible = "samsung,ssp-spi"; + spi-max-frequency = <5000000>; + interrupt-parent = <&gpx0>; + interrupts = <2 0>; + ap-mcu-int = <&gpx0 0 0>; + mcu-ap-int1 = <&gpx0 2 0>; + mcu-ap-int2 = <&gpx0 4 0>; + mcu-reset = <&gpx0 5 0>; + reg = <0>; + controller-data { + cs-gpio = <&gpb 5 0>; + samsung,spi-feedback-dealy = <0>; + }; + }; + }; + + mipi_lcd: mipi_panel { + compatible = "samsung,s6e63j0x03"; + lcd-panel-name = "s6e63j0x03"; + reset-gpio = <&gpf2 1 0>; /* mux function : output */ + te-gpio = <&gpx0 6 0>; /* mux function : input */ + det-gpio = <&gpx1 7 0>; /* mux function : input */ + reset-delay = <5>; + power-on-delay = <30>; + power-off-delay = <120>; + was-enabled; + vdd3-supply = <&ldo26_reg>; + vci-supply = <&ldo22_reg>; + samsung,panel-width-mm = <29>; + samsung,panel-height-mm = <29>; + samsung,panel-frame-freq = <30>; /* Hz */ + + display-timings { + native-mode = <&timing0>; + + timing0: timing-0 { + clock-frequency = <0>; + hactive = <320>; + vactive = <320>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <1>; + vfront-porch = <150>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + cpu-timings { + cs_setup = <0>; + wr_setup = <0>; + wr_act = <1>; + wr_hold = <0>; + }; + }; + + dsi@11C80000 { + client = <&mipi_lcd>; + source = <&fimd>; + vdd11-supply = <&ldo8_reg>; + vdd18-supply = <&ldo10_reg>; + status = "okay"; + + mipi-dsi-config { + interface = <0>; /* command mode */ + pixel_format = <7>; /* RGB 24BPP */ + auto_flush = <0>; + eot_disable = <0>; + auto_vertical_cnt = <0>; + hse = <0>; + hfp = <0>; + hbp = <0>; + hsa = <0>; + no_data_lane = <0>; /* use 1 lane */ + byte_clk = <0>; + burst_mode = <3>; + p = <3>; /* p m s : 250Mbps */ + m = <125>; + s = <2>; + pll_stable_time = <500>; + esc_clk = <20000000>; + stop_holding_cnt = <0xf>; + bta_timeout = <0xff>; + rx_timeout = <0xffff>; + virtual_ch = <0>; + cmd_allow = <0xf>; + }; + }; + + fimd@11c00000 { + display = <&mipi_lcd>; + display-bus = <&dsi_0>; + dsi-enable; + vidout-i80-ldi0; + vidout-pnrmode-rgb; + default_win = <3>; + gamma-tbl = <0x000C0000 0x005C002C 0x00EC009C 0x01B00148 + 0x02940228 0x032402E4 0x038C035C 0x03DC03B8 + 0x000003FC 0x00100000 0x00680034 0x00F800A8 + 0x01C00154 0x02980230 0x032802E8 0x03900360 + 0x03DC03B8 0x000003FC 0x00100000 0x00680034 + 0x00F800A8 0x01C00154 0x02980230 0x032802E8 + 0x03900360 0x03DC03B8 0x000003FC 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000>; + status = "okay"; + }; + + gpu@13000000 { + status = "okay"; + clock-names = "pll", "mux1", "mux2", "sclk", "block", "g3d"; + clocks = <&clock 17>, <&clock 392>, <&clock 394>, + <&clock 172>, <&clock 483>, <&clock 276>; + vdd_g3d-supply = <&buck4_reg>; + control-regulator; + dvfs { + step@0 { + rate = <80000000>; + min_uv = <600000>; + max_uv = <600000>; + downthreshold = <0>; + upthreshold = <255>; + }; + step@1 { + rate = <80000000>; + min_uv = <900000>; + max_uv = <900000>; + downthreshold = <0>; + upthreshold = <255>; + }; + }; + }; + + hsotg@12480000 { + status = "okay"; + vusb_core-supply = <&safeout_reg>; + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + extcon = <&muic>; + }; + + exynos-usbphy@125B0000 { + status = "okay"; + }; + + rfkill-gpio { + compatible = "rfkill-gpio"; + clocks = <&s5m8767_osc 2 /*S2MPS11_CLK_BT*/>; + clock-names = "bt_clk32k"; + + bt { + label = "bluetooth"; + type = <2>; + reset-gpio = <&gpx3 0 0>; + shutdown-gpio = <&gpl0 6 0>; + wake-gpio = <&gpx3 1 0>; + host-wake-gpio = <&gpx2 6 0>; + clock = "bt_clk32k"; + }; + }; + + codec@13400000 { + status = "okay"; + }; + + i2s0: i2s@03830000 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + assigned-clock-parents = <&clock_audss 3 &clock_audss 0>, + <&clock_audss 0 &clock 6>; + assigned-clock-rates = <&clock_audss 1 96000000>, + <&clock_audss 2 96000000>; + }; + + sound { + compatible = "tizenw,ymu831"; + clocks = <&clock 2>, <&clock 396>, <&clock 21>, <&clock 6>, + <&s5m8767_osc 2 /*S2MPS11_CLK_BT*/>; + clock-names = "parent", "out-mux", "out", "pll", "clk_32k"; + /* EPLL */ + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&ymu831>; + samsung,model = "ymu831"; + }; + + camera { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cam_port_b_clk_active>; + + fimc_0: fimc@11800000 { + clock-frequency = <80000000>; + status = "okay"; + }; + + fimc_1: fimc@11810000 { + clock-frequency = <80000000>; + status = "okay"; + }; + + fimc_2: fimc@11820000 { + clock-frequency = <80000000>; + status = "okay"; + }; + + fimc_3: fimc@11830000 { + clock-frequency = <80000000>; + status = "okay"; + }; + + csis_1: csis@11890000 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + clock-frequency = <80000000>; + #address-cells = <1>; + #size-cells = <0>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; + }; + + fimc-is@12000000 { + samsung,aclk-frequency = <80000000>; + samsung,aclk-axi-frequency = <80000000>; + samsung,mcuisp-frequency = <400000000>; + status = "okay"; + + fimc-isp@12000000 { + status = "okay"; + }; + + fimc_lite_1: fimc-lite@123A0000 { + status = "okay"; + }; + + i2c1_isp: i2c-isp@12140000 { + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + + s5k6a3@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&ldo24_reg>; + svddio-supply = <&ldo27_reg>; + afvdd-supply = <&ldo19_reg>; + gpios = <&gpj1 0 0>; + clocks = <&camera 1>; /* CAM_B_CLKOUT */ + clock-names = "extclk"; + clock-frequency = <24000000>; + port { + is_s5k6a3_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + }; + }; + + jack { + compatible = "samsung,extcon-port"; + extcon = <&muic>; + + samsung,extcon-online-usb; + samsung,extcon-online-charger; + }; + + tmu@100C0000 { + vtmu-supply = <&ldo10_reg>; + sampling-interval = <5000>; + t0_on = <0x1e0>; + t0_off = <0x960>; + t1_on = <0x960>; + t1_off = <0x30>; + status = "okay"; + }; + + exynos-drm { + compatible = "samsung,exynos-drm"; + crtcs = <&fimd>; + connectors = <&dsi_0>; + }; +};

[PATCHv4,7/7] ARM: dts: Add device tree sources for Exynos3250

Commit Message

Comments

Patch