diff mbox

media: mx1_camera: Remove driver

Message ID 1399788551-8218-1-git-send-email-shc_work@mail.ru (mailing list archive)
State New, archived
Headers show

Commit Message

Alexander Shiyan May 11, 2014, 6:09 a.m. UTC
That driver hasn't been really maintained for a long time. It doesn't
compile in any way, it includes non-existent headers, has no users,
and marked as "broken" more than year. Due to these factors, mx1_camera
is now removed from the tree.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-imx/Makefile                      |   3 -
 arch/arm/mach-imx/devices/Kconfig               |   3 -
 arch/arm/mach-imx/devices/Makefile              |   1 -
 arch/arm/mach-imx/devices/devices-common.h      |  10 -
 arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
 arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
 arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
 drivers/media/platform/soc_camera/Kconfig       |  13 -
 drivers/media/platform/soc_camera/Makefile      |   1 -
 drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
 include/linux/platform_data/camera-mx1.h        |  35 -
 11 files changed, 1027 deletions(-)
 delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
 delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
 delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
 delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
 delete mode 100644 include/linux/platform_data/camera-mx1.h

Comments

Sascha Hauer May 12, 2014, 5:20 a.m. UTC | #1
On Sun, May 11, 2014 at 10:09:11AM +0400, Alexander Shiyan wrote:
> That driver hasn't been really maintained for a long time. It doesn't
> compile in any way, it includes non-existent headers, has no users,
> and marked as "broken" more than year. Due to these factors, mx1_camera
> is now removed from the tree.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

I remember this driver was in the way of further cleanups. We should
remove it.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Sascha
Hans Verkuil May 12, 2014, 7:26 a.m. UTC | #2
On 05/11/2014 08:09 AM, Alexander Shiyan wrote:
> That driver hasn't been really maintained for a long time. It doesn't
> compile in any way, it includes non-existent headers, has no users,
> and marked as "broken" more than year. Due to these factors, mx1_camera
> is now removed from the tree.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

I hadn't realized it depended on BROKEN, so:

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

Regards,

	Hans

> ---
>  arch/arm/mach-imx/Makefile                      |   3 -
>  arch/arm/mach-imx/devices/Kconfig               |   3 -
>  arch/arm/mach-imx/devices/Makefile              |   1 -
>  arch/arm/mach-imx/devices/devices-common.h      |  10 -
>  arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
>  arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
>  arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
>  drivers/media/platform/soc_camera/Kconfig       |  13 -
>  drivers/media/platform/soc_camera/Makefile      |   1 -
>  drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
>  include/linux/platform_data/camera-mx1.h        |  35 -
>  11 files changed, 1027 deletions(-)
>  delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
>  delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
>  delete mode 100644 include/linux/platform_data/camera-mx1.h
> 
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 8dd377b..0bdec2a 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -38,9 +38,6 @@ obj-y += ssi-fiq.o
>  obj-y += ssi-fiq-ksym.o
>  endif
>  
> -# Support for CMOS sensor interface
> -obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
> -
>  # i.MX1 based machines
>  obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
>  obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
> diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
> index 2d260a5..846c019 100644
> --- a/arch/arm/mach-imx/devices/Kconfig
> +++ b/arch/arm/mach-imx/devices/Kconfig
> @@ -49,9 +49,6 @@ config IMX_HAVE_PLATFORM_IMX_UDC
>  config IMX_HAVE_PLATFORM_IPU_CORE
>  	bool
>  
> -config IMX_HAVE_PLATFORM_MX1_CAMERA
> -	bool
> -
>  config IMX_HAVE_PLATFORM_MX2_CAMERA
>  	bool
>  
> diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
> index 1cbc14c..d421c34 100644
> --- a/arch/arm/mach-imx/devices/Makefile
> +++ b/arch/arm/mach-imx/devices/Makefile
> @@ -18,7 +18,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
> -obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
>  obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
> diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
> index 61352a8..c8169da 100644
> --- a/arch/arm/mach-imx/devices/devices-common.h
> +++ b/arch/arm/mach-imx/devices/devices-common.h
> @@ -208,16 +208,6 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
>  		const struct imx_ipu_core_data *data,
>  		struct mx3fb_platform_data *pdata);
>  
> -#include <linux/platform_data/camera-mx1.h>
> -struct imx_mx1_camera_data {
> -	resource_size_t iobase;
> -	resource_size_t iosize;
> -	resource_size_t irq;
> -};
> -struct platform_device *__init imx_add_mx1_camera(
> -		const struct imx_mx1_camera_data *data,
> -		const struct mx1_camera_pdata *pdata);
> -
>  #include <linux/platform_data/camera-mx2.h>
>  struct imx_mx2_camera_data {
>  	const char *devid;
> diff --git a/arch/arm/mach-imx/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c
> deleted file mode 100644
> index 2c67881..0000000
> --- a/arch/arm/mach-imx/devices/platform-mx1-camera.c
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -/*
> - * Copyright (C) 2010 Pengutronix
> - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
> - *
> - * This program is free software; you can redistribute it and/or modify it under
> - * the terms of the GNU General Public License version 2 as published by the
> - * Free Software Foundation.
> - */
> -#include "../hardware.h"
> -#include "devices-common.h"
> -
> -#define imx_mx1_camera_data_entry_single(soc, _size)			\
> -	{								\
> -		.iobase = soc ## _CSI ## _BASE_ADDR,			\
> -		.iosize = _size,					\
> -		.irq = soc ## _INT_CSI,					\
> -	}
> -
> -#ifdef CONFIG_SOC_IMX1
> -const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
> -	imx_mx1_camera_data_entry_single(MX1, 10);
> -#endif /* ifdef CONFIG_SOC_IMX1 */
> -
> -struct platform_device *__init imx_add_mx1_camera(
> -		const struct imx_mx1_camera_data *data,
> -		const struct mx1_camera_pdata *pdata)
> -{
> -	struct resource res[] = {
> -		{
> -			.start = data->iobase,
> -			.end = data->iobase + data->iosize - 1,
> -			.flags = IORESOURCE_MEM,
> -		}, {
> -			.start = data->irq,
> -			.end = data->irq,
> -			.flags = IORESOURCE_IRQ,
> -		},
> -	};
> -	return imx_add_platform_device_dmamask("mx1-camera", 0,
> -			res, ARRAY_SIZE(res),
> -			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
> -}
> diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
> deleted file mode 100644
> index fb38436..0000000
> --- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -/*
> - * Exported ksyms of ARCH_MX1
> - *
> - * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -#include <linux/platform_device.h>
> -#include <linux/module.h>
> -
> -#include <linux/platform_data/camera-mx1.h>
> -
> -/* IMX camera FIQ handler */
> -EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
> -EXPORT_SYMBOL(mx1_camera_sof_fiq_end);
> diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
> deleted file mode 100644
> index 9c69aa6..0000000
> --- a/arch/arm/mach-imx/mx1-camera-fiq.S
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -/*
> - *  Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
> - *
> - *  Based on linux/arch/arm/lib/floppydma.S
> - *      Copyright (C) 1995, 1996 Russell King
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -#include <linux/linkage.h>
> -#include <asm/assembler.h>
> -
> -		.text
> -		.global	mx1_camera_sof_fiq_end
> -		.global	mx1_camera_sof_fiq_start
> -mx1_camera_sof_fiq_start:
> -		@ enable dma
> -		ldr	r12, [r9]
> -		orr	r12, r12, #0x00000001
> -		str	r12, [r9]
> -		@ unmask DMA interrupt
> -		ldr	r12, [r8]
> -		bic	r12, r12, r13
> -		str	r12, [r8]
> -		@ disable SOF interrupt
> -		ldr	r12, [r10]
> -		bic	r12, r12, #0x00010000
> -		str	r12, [r10]
> -		@ clear SOF flag
> -		mov	r12, #0x00010000
> -		str	r12, [r11]
> -		@ return from FIQ
> -		subs	pc, lr, #4
> -mx1_camera_sof_fiq_end:
> diff --git a/drivers/media/platform/soc_camera/Kconfig b/drivers/media/platform/soc_camera/Kconfig
> index af39c46..122e03a 100644
> --- a/drivers/media/platform/soc_camera/Kconfig
> +++ b/drivers/media/platform/soc_camera/Kconfig
> @@ -17,19 +17,6 @@ config SOC_CAMERA_PLATFORM
>  	help
>  	  This is a generic SoC camera platform driver, useful for testing
>  
> -config MX1_VIDEO
> -	bool
> -
> -config VIDEO_MX1
> -	tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
> -	depends on BROKEN
> -	depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
> -	select FIQ
> -	select VIDEOBUF_DMA_CONTIG
> -	select MX1_VIDEO
> -	---help---
> -	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
> -
>  config VIDEO_MX3
>  	tristate "i.MX3x Camera Sensor Interface driver"
>  	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
> diff --git a/drivers/media/platform/soc_camera/Makefile b/drivers/media/platform/soc_camera/Makefile
> index 8aed26d..2826382 100644
> --- a/drivers/media/platform/soc_camera/Makefile
> +++ b/drivers/media/platform/soc_camera/Makefile
> @@ -7,7 +7,6 @@ obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
>  
>  # soc-camera host drivers have to be linked after camera drivers
>  obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel-isi.o
> -obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
>  obj-$(CONFIG_VIDEO_MX2)			+= mx2_camera.o
>  obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
>  obj-$(CONFIG_VIDEO_OMAP1)		+= omap1_camera.o
> diff --git a/drivers/media/platform/soc_camera/mx1_camera.c b/drivers/media/platform/soc_camera/mx1_camera.c
> deleted file mode 100644
> index fea3e61..0000000
> --- a/drivers/media/platform/soc_camera/mx1_camera.c
> +++ /dev/null
> @@ -1,866 +0,0 @@
> -/*
> - * V4L2 Driver for i.MXL/i.MXL camera (CSI) host
> - *
> - * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
> - * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
> - *
> - * Based on PXA SoC camera driver
> - * Copyright (C) 2006, Sascha Hauer, Pengutronix
> - * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -#include <linux/clk.h>
> -#include <linux/delay.h>
> -#include <linux/device.h>
> -#include <linux/dma-mapping.h>
> -#include <linux/errno.h>
> -#include <linux/fs.h>
> -#include <linux/init.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/kernel.h>
> -#include <linux/mm.h>
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/platform_device.h>
> -#include <linux/sched.h>
> -#include <linux/slab.h>
> -#include <linux/time.h>
> -#include <linux/videodev2.h>
> -
> -#include <media/soc_camera.h>
> -#include <media/v4l2-common.h>
> -#include <media/v4l2-dev.h>
> -#include <media/videobuf-dma-contig.h>
> -#include <media/soc_mediabus.h>
> -
> -#include <asm/dma.h>
> -#include <asm/fiq.h>
> -#include <mach/dma-mx1-mx2.h>
> -#include <mach/hardware.h>
> -#include <mach/irqs.h>
> -#include <linux/platform_data/camera-mx1.h>
> -
> -/*
> - * CSI registers
> - */
> -#define CSICR1		0x00			/* CSI Control Register 1 */
> -#define CSISR		0x08			/* CSI Status Register */
> -#define CSIRXR		0x10			/* CSI RxFIFO Register */
> -
> -#define CSICR1_RXFF_LEVEL(x)	(((x) & 0x3) << 19)
> -#define CSICR1_SOF_POL		(1 << 17)
> -#define CSICR1_SOF_INTEN	(1 << 16)
> -#define CSICR1_MCLKDIV(x)	(((x) & 0xf) << 12)
> -#define CSICR1_MCLKEN		(1 << 9)
> -#define CSICR1_FCC		(1 << 8)
> -#define CSICR1_BIG_ENDIAN	(1 << 7)
> -#define CSICR1_CLR_RXFIFO	(1 << 5)
> -#define CSICR1_GCLK_MODE	(1 << 4)
> -#define CSICR1_DATA_POL		(1 << 2)
> -#define CSICR1_REDGE		(1 << 1)
> -#define CSICR1_EN		(1 << 0)
> -
> -#define CSISR_SFF_OR_INT	(1 << 25)
> -#define CSISR_RFF_OR_INT	(1 << 24)
> -#define CSISR_STATFF_INT	(1 << 21)
> -#define CSISR_RXFF_INT		(1 << 18)
> -#define CSISR_SOF_INT		(1 << 16)
> -#define CSISR_DRDY		(1 << 0)
> -
> -#define DRIVER_VERSION "0.0.2"
> -#define DRIVER_NAME "mx1-camera"
> -
> -#define CSI_IRQ_MASK	(CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
> -			CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT)
> -
> -#define CSI_BUS_FLAGS	(V4L2_MBUS_MASTER | V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
> -			V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | \
> -			V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
> -			V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_LOW)
> -
> -#define MAX_VIDEO_MEM 16	/* Video memory limit in megabytes */
> -
> -/*
> - * Structures
> - */
> -
> -/* buffer for one video frame */
> -struct mx1_buffer {
> -	/* common v4l buffer stuff -- must be first */
> -	struct videobuf_buffer		vb;
> -	enum v4l2_mbus_pixelcode	code;
> -	int				inwork;
> -};
> -
> -/*
> - * i.MX1/i.MXL is only supposed to handle one camera on its Camera Sensor
> - * Interface. If anyone ever builds hardware to enable more than
> - * one camera, they will have to modify this driver too
> - */
> -struct mx1_camera_dev {
> -	struct soc_camera_host		soc_host;
> -	struct mx1_camera_pdata		*pdata;
> -	struct mx1_buffer		*active;
> -	struct resource			*res;
> -	struct clk			*clk;
> -	struct list_head		capture;
> -
> -	void __iomem			*base;
> -	int				dma_chan;
> -	unsigned int			irq;
> -	unsigned long			mclk;
> -
> -	spinlock_t			lock;
> -};
> -
> -/*
> - *  Videobuf operations
> - */
> -static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
> -			      unsigned int *size)
> -{
> -	struct soc_camera_device *icd = vq->priv_data;
> -
> -	*size = icd->sizeimage;
> -
> -	if (!*count)
> -		*count = 32;
> -
> -	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
> -		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
> -
> -	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
> -
> -	return 0;
> -}
> -
> -static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
> -{
> -	struct soc_camera_device *icd = vq->priv_data;
> -	struct videobuf_buffer *vb = &buf->vb;
> -
> -	BUG_ON(in_interrupt());
> -
> -	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
> -		vb, vb->baddr, vb->bsize);
> -
> -	/*
> -	 * This waits until this buffer is out of danger, i.e., until it is no
> -	 * longer in STATE_QUEUED or STATE_ACTIVE
> -	 */
> -	videobuf_waiton(vq, vb, 0, 0);
> -	videobuf_dma_contig_free(vq, vb);
> -
> -	vb->state = VIDEOBUF_NEEDS_INIT;
> -}
> -
> -static int mx1_videobuf_prepare(struct videobuf_queue *vq,
> -		struct videobuf_buffer *vb, enum v4l2_field field)
> -{
> -	struct soc_camera_device *icd = vq->priv_data;
> -	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
> -	int ret;
> -
> -	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
> -		vb, vb->baddr, vb->bsize);
> -
> -	/* Added list head initialization on alloc */
> -	WARN_ON(!list_empty(&vb->queue));
> -
> -	BUG_ON(NULL == icd->current_fmt);
> -
> -	/*
> -	 * I think, in buf_prepare you only have to protect global data,
> -	 * the actual buffer is yours
> -	 */
> -	buf->inwork = 1;
> -
> -	if (buf->code	!= icd->current_fmt->code ||
> -	    vb->width	!= icd->user_width ||
> -	    vb->height	!= icd->user_height ||
> -	    vb->field	!= field) {
> -		buf->code	= icd->current_fmt->code;
> -		vb->width	= icd->user_width;
> -		vb->height	= icd->user_height;
> -		vb->field	= field;
> -		vb->state	= VIDEOBUF_NEEDS_INIT;
> -	}
> -
> -	vb->size = icd->sizeimage;
> -	if (0 != vb->baddr && vb->bsize < vb->size) {
> -		ret = -EINVAL;
> -		goto out;
> -	}
> -
> -	if (vb->state == VIDEOBUF_NEEDS_INIT) {
> -		ret = videobuf_iolock(vq, vb, NULL);
> -		if (ret)
> -			goto fail;
> -
> -		vb->state = VIDEOBUF_PREPARED;
> -	}
> -
> -	buf->inwork = 0;
> -
> -	return 0;
> -
> -fail:
> -	free_buffer(vq, buf);
> -out:
> -	buf->inwork = 0;
> -	return ret;
> -}
> -
> -static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
> -{
> -	struct videobuf_buffer *vbuf = &pcdev->active->vb;
> -	struct device *dev = pcdev->soc_host.icd->parent;
> -	int ret;
> -
> -	if (unlikely(!pcdev->active)) {
> -		dev_err(dev, "DMA End IRQ with no active buffer\n");
> -		return -EFAULT;
> -	}
> -
> -	/* setup sg list for future DMA */
> -	ret = imx_dma_setup_single(pcdev->dma_chan,
> -		videobuf_to_dma_contig(vbuf),
> -		vbuf->size, pcdev->res->start +
> -		CSIRXR, DMA_MODE_READ);
> -	if (unlikely(ret))
> -		dev_err(dev, "Failed to setup DMA sg list\n");
> -
> -	return ret;
> -}
> -
> -/* Called under spinlock_irqsave(&pcdev->lock, ...) */
> -static void mx1_videobuf_queue(struct videobuf_queue *vq,
> -						struct videobuf_buffer *vb)
> -{
> -	struct soc_camera_device *icd = vq->priv_data;
> -	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
> -	struct mx1_camera_dev *pcdev = ici->priv;
> -	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
> -
> -	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
> -		vb, vb->baddr, vb->bsize);
> -
> -	list_add_tail(&vb->queue, &pcdev->capture);
> -
> -	vb->state = VIDEOBUF_ACTIVE;
> -
> -	if (!pcdev->active) {
> -		pcdev->active = buf;
> -
> -		/* setup sg list for future DMA */
> -		if (!mx1_camera_setup_dma(pcdev)) {
> -			unsigned int temp;
> -			/* enable SOF irq */
> -			temp = __raw_readl(pcdev->base + CSICR1) |
> -							CSICR1_SOF_INTEN;
> -			__raw_writel(temp, pcdev->base + CSICR1);
> -		}
> -	}
> -}
> -
> -static void mx1_videobuf_release(struct videobuf_queue *vq,
> -				 struct videobuf_buffer *vb)
> -{
> -	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
> -#ifdef DEBUG
> -	struct soc_camera_device *icd = vq->priv_data;
> -	struct device *dev = icd->parent;
> -
> -	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
> -		vb, vb->baddr, vb->bsize);
> -
> -	switch (vb->state) {
> -	case VIDEOBUF_ACTIVE:
> -		dev_dbg(dev, "%s (active)\n", __func__);
> -		break;
> -	case VIDEOBUF_QUEUED:
> -		dev_dbg(dev, "%s (queued)\n", __func__);
> -		break;
> -	case VIDEOBUF_PREPARED:
> -		dev_dbg(dev, "%s (prepared)\n", __func__);
> -		break;
> -	default:
> -		dev_dbg(dev, "%s (unknown)\n", __func__);
> -		break;
> -	}
> -#endif
> -
> -	free_buffer(vq, buf);
> -}
> -
> -static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
> -			      struct videobuf_buffer *vb,
> -			      struct mx1_buffer *buf)
> -{
> -	/* _init is used to debug races, see comment in mx1_camera_reqbufs() */
> -	list_del_init(&vb->queue);
> -	vb->state = VIDEOBUF_DONE;
> -	v4l2_get_timestamp(&vb->ts);
> -	vb->field_count++;
> -	wake_up(&vb->done);
> -
> -	if (list_empty(&pcdev->capture)) {
> -		pcdev->active = NULL;
> -		return;
> -	}
> -
> -	pcdev->active = list_entry(pcdev->capture.next,
> -				   struct mx1_buffer, vb.queue);
> -
> -	/* setup sg list for future DMA */
> -	if (likely(!mx1_camera_setup_dma(pcdev))) {
> -		unsigned int temp;
> -
> -		/* enable SOF irq */
> -		temp = __raw_readl(pcdev->base + CSICR1) | CSICR1_SOF_INTEN;
> -		__raw_writel(temp, pcdev->base + CSICR1);
> -	}
> -}
> -
> -static void mx1_camera_dma_irq(int channel, void *data)
> -{
> -	struct mx1_camera_dev *pcdev = data;
> -	struct device *dev = pcdev->soc_host.icd->parent;
> -	struct mx1_buffer *buf;
> -	struct videobuf_buffer *vb;
> -	unsigned long flags;
> -
> -	spin_lock_irqsave(&pcdev->lock, flags);
> -
> -	imx_dma_disable(channel);
> -
> -	if (unlikely(!pcdev->active)) {
> -		dev_err(dev, "DMA End IRQ with no active buffer\n");
> -		goto out;
> -	}
> -
> -	vb = &pcdev->active->vb;
> -	buf = container_of(vb, struct mx1_buffer, vb);
> -	WARN_ON(buf->inwork || list_empty(&vb->queue));
> -	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
> -		vb, vb->baddr, vb->bsize);
> -
> -	mx1_camera_wakeup(pcdev, vb, buf);
> -out:
> -	spin_unlock_irqrestore(&pcdev->lock, flags);
> -}
> -
> -static struct videobuf_queue_ops mx1_videobuf_ops = {
> -	.buf_setup	= mx1_videobuf_setup,
> -	.buf_prepare	= mx1_videobuf_prepare,
> -	.buf_queue	= mx1_videobuf_queue,
> -	.buf_release	= mx1_videobuf_release,
> -};
> -
> -static void mx1_camera_init_videobuf(struct videobuf_queue *q,
> -				     struct soc_camera_device *icd)
> -{
> -	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
> -	struct mx1_camera_dev *pcdev = ici->priv;
> -
> -	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->parent,
> -				&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
> -				V4L2_FIELD_NONE,
> -				sizeof(struct mx1_buffer), icd, &ici->host_lock);
> -}
> -
> -static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
> -{
> -	unsigned int mclk = pcdev->mclk;
> -	unsigned long div;
> -	unsigned long lcdclk;
> -
> -	lcdclk = clk_get_rate(pcdev->clk);
> -
> -	/*
> -	 * We verify platform_mclk_10khz != 0, so if anyone breaks it, here
> -	 * they get a nice Oops
> -	 */
> -	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
> -
> -	dev_dbg(pcdev->soc_host.icd->parent,
> -		"System clock %lukHz, target freq %dkHz, divisor %lu\n",
> -		lcdclk / 1000, mclk / 1000, div);
> -
> -	return div;
> -}
> -
> -static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
> -{
> -	unsigned int csicr1 = CSICR1_EN;
> -
> -	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "Activate device\n");
> -
> -	clk_prepare_enable(pcdev->clk);
> -
> -	/* enable CSI before doing anything else */
> -	__raw_writel(csicr1, pcdev->base + CSICR1);
> -
> -	csicr1 |= CSICR1_MCLKEN | CSICR1_FCC | CSICR1_GCLK_MODE;
> -	csicr1 |= CSICR1_MCLKDIV(mclk_get_divisor(pcdev));
> -	csicr1 |= CSICR1_RXFF_LEVEL(2); /* 16 words */
> -
> -	__raw_writel(csicr1, pcdev->base + CSICR1);
> -}
> -
> -static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
> -{
> -	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "Deactivate device\n");
> -
> -	/* Disable all CSI interface */
> -	__raw_writel(0x00, pcdev->base + CSICR1);
> -
> -	clk_disable_unprepare(pcdev->clk);
> -}
> -
> -static int mx1_camera_add_device(struct soc_camera_device *icd)
> -{
> -	dev_info(icd->parent, "MX1 Camera driver attached to camera %d\n",
> -		 icd->devnum);
> -
> -	return 0;
> -}
> -
> -static void mx1_camera_remove_device(struct soc_camera_device *icd)
> -{
> -	dev_info(icd->parent, "MX1 Camera driver detached from camera %d\n",
> -		 icd->devnum);
> -}
> -
> -/*
> - * The following two functions absolutely depend on the fact, that
> - * there can be only one camera on i.MX1/i.MXL camera sensor interface
> - */
> -static int mx1_camera_clock_start(struct soc_camera_host *ici)
> -{
> -	struct mx1_camera_dev *pcdev = ici->priv;
> -
> -	mx1_camera_activate(pcdev);
> -
> -	return 0;
> -}
> -
> -static void mx1_camera_clock_stop(struct soc_camera_host *ici)
> -{
> -	struct mx1_camera_dev *pcdev = ici->priv;
> -	unsigned int csicr1;
> -
> -	/* disable interrupts */
> -	csicr1 = __raw_readl(pcdev->base + CSICR1) & ~CSI_IRQ_MASK;
> -	__raw_writel(csicr1, pcdev->base + CSICR1);
> -
> -	/* Stop DMA engine */
> -	imx_dma_disable(pcdev->dma_chan);
> -
> -	mx1_camera_deactivate(pcdev);
> -}
> -
> -static int mx1_camera_set_bus_param(struct soc_camera_device *icd)
> -{
> -	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> -	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
> -	struct mx1_camera_dev *pcdev = ici->priv;
> -	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
> -	unsigned long common_flags;
> -	unsigned int csicr1;
> -	int ret;
> -
> -	/* MX1 supports only 8bit buswidth */
> -	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
> -	if (!ret) {
> -		common_flags = soc_mbus_config_compatible(&cfg, CSI_BUS_FLAGS);
> -		if (!common_flags) {
> -			dev_warn(icd->parent,
> -				 "Flags incompatible: camera 0x%x, host 0x%x\n",
> -				 cfg.flags, CSI_BUS_FLAGS);
> -			return -EINVAL;
> -		}
> -	} else if (ret != -ENOIOCTLCMD) {
> -		return ret;
> -	} else {
> -		common_flags = CSI_BUS_FLAGS;
> -	}
> -
> -	/* Make choises, based on platform choice */
> -	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
> -		(common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
> -			if (!pcdev->pdata ||
> -			     pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH)
> -				common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
> -			else
> -				common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
> -	}
> -
> -	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
> -		(common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
> -			if (!pcdev->pdata ||
> -			     pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING)
> -				common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
> -			else
> -				common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
> -	}
> -
> -	if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
> -		(common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
> -			if (!pcdev->pdata ||
> -			     pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH)
> -				common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
> -			else
> -				common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
> -	}
> -
> -	cfg.flags = common_flags;
> -	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
> -	if (ret < 0 && ret != -ENOIOCTLCMD) {
> -		dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
> -			common_flags, ret);
> -		return ret;
> -	}
> -
> -	csicr1 = __raw_readl(pcdev->base + CSICR1);
> -
> -	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> -		csicr1 |= CSICR1_REDGE;
> -	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> -		csicr1 |= CSICR1_SOF_POL;
> -	if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
> -		csicr1 |= CSICR1_DATA_POL;
> -
> -	__raw_writel(csicr1, pcdev->base + CSICR1);
> -
> -	return 0;
> -}
> -
> -static int mx1_camera_set_fmt(struct soc_camera_device *icd,
> -			      struct v4l2_format *f)
> -{
> -	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> -	const struct soc_camera_format_xlate *xlate;
> -	struct v4l2_pix_format *pix = &f->fmt.pix;
> -	struct v4l2_mbus_framefmt mf;
> -	int ret, buswidth;
> -
> -	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
> -	if (!xlate) {
> -		dev_warn(icd->parent, "Format %x not found\n",
> -			 pix->pixelformat);
> -		return -EINVAL;
> -	}
> -
> -	buswidth = xlate->host_fmt->bits_per_sample;
> -	if (buswidth > 8) {
> -		dev_warn(icd->parent,
> -			 "bits-per-sample %d for format %x unsupported\n",
> -			 buswidth, pix->pixelformat);
> -		return -EINVAL;
> -	}
> -
> -	mf.width	= pix->width;
> -	mf.height	= pix->height;
> -	mf.field	= pix->field;
> -	mf.colorspace	= pix->colorspace;
> -	mf.code		= xlate->code;
> -
> -	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (mf.code != xlate->code)
> -		return -EINVAL;
> -
> -	pix->width		= mf.width;
> -	pix->height		= mf.height;
> -	pix->field		= mf.field;
> -	pix->colorspace		= mf.colorspace;
> -	icd->current_fmt	= xlate;
> -
> -	return ret;
> -}
> -
> -static int mx1_camera_try_fmt(struct soc_camera_device *icd,
> -			      struct v4l2_format *f)
> -{
> -	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> -	const struct soc_camera_format_xlate *xlate;
> -	struct v4l2_pix_format *pix = &f->fmt.pix;
> -	struct v4l2_mbus_framefmt mf;
> -	int ret;
> -	/* TODO: limit to mx1 hardware capabilities */
> -
> -	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
> -	if (!xlate) {
> -		dev_warn(icd->parent, "Format %x not found\n",
> -			 pix->pixelformat);
> -		return -EINVAL;
> -	}
> -
> -	mf.width	= pix->width;
> -	mf.height	= pix->height;
> -	mf.field	= pix->field;
> -	mf.colorspace	= pix->colorspace;
> -	mf.code		= xlate->code;
> -
> -	/* limit to sensor capabilities */
> -	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
> -	if (ret < 0)
> -		return ret;
> -
> -	pix->width	= mf.width;
> -	pix->height	= mf.height;
> -	pix->field	= mf.field;
> -	pix->colorspace	= mf.colorspace;
> -
> -	return 0;
> -}
> -
> -static int mx1_camera_reqbufs(struct soc_camera_device *icd,
> -			      struct v4l2_requestbuffers *p)
> -{
> -	int i;
> -
> -	/*
> -	 * This is for locking debugging only. I removed spinlocks and now I
> -	 * check whether .prepare is ever called on a linked buffer, or whether
> -	 * a dma IRQ can occur for an in-work or unlinked buffer. Until now
> -	 * it hadn't triggered
> -	 */
> -	for (i = 0; i < p->count; i++) {
> -		struct mx1_buffer *buf = container_of(icd->vb_vidq.bufs[i],
> -						      struct mx1_buffer, vb);
> -		buf->inwork = 0;
> -		INIT_LIST_HEAD(&buf->vb.queue);
> -	}
> -
> -	return 0;
> -}
> -
> -static unsigned int mx1_camera_poll(struct file *file, poll_table *pt)
> -{
> -	struct soc_camera_device *icd = file->private_data;
> -	struct mx1_buffer *buf;
> -
> -	buf = list_entry(icd->vb_vidq.stream.next, struct mx1_buffer,
> -			 vb.stream);
> -
> -	poll_wait(file, &buf->vb.done, pt);
> -
> -	if (buf->vb.state == VIDEOBUF_DONE ||
> -	    buf->vb.state == VIDEOBUF_ERROR)
> -		return POLLIN | POLLRDNORM;
> -
> -	return 0;
> -}
> -
> -static int mx1_camera_querycap(struct soc_camera_host *ici,
> -			       struct v4l2_capability *cap)
> -{
> -	/* cap->name is set by the friendly caller:-> */
> -	strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card));
> -	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
> -
> -	return 0;
> -}
> -
> -static struct soc_camera_host_ops mx1_soc_camera_host_ops = {
> -	.owner		= THIS_MODULE,
> -	.add		= mx1_camera_add_device,
> -	.remove		= mx1_camera_remove_device,
> -	.clock_start	= mx1_camera_clock_start,
> -	.clock_stop	= mx1_camera_clock_stop,
> -	.set_bus_param	= mx1_camera_set_bus_param,
> -	.set_fmt	= mx1_camera_set_fmt,
> -	.try_fmt	= mx1_camera_try_fmt,
> -	.init_videobuf	= mx1_camera_init_videobuf,
> -	.reqbufs	= mx1_camera_reqbufs,
> -	.poll		= mx1_camera_poll,
> -	.querycap	= mx1_camera_querycap,
> -};
> -
> -static struct fiq_handler fh = {
> -	.name		= "csi_sof"
> -};
> -
> -static int __init mx1_camera_probe(struct platform_device *pdev)
> -{
> -	struct mx1_camera_dev *pcdev;
> -	struct resource *res;
> -	struct pt_regs regs;
> -	struct clk *clk;
> -	void __iomem *base;
> -	unsigned int irq;
> -	int err = 0;
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	irq = platform_get_irq(pdev, 0);
> -	if (!res || (int)irq <= 0) {
> -		err = -ENODEV;
> -		goto exit;
> -	}
> -
> -	clk = clk_get(&pdev->dev, "csi_clk");
> -	if (IS_ERR(clk)) {
> -		err = PTR_ERR(clk);
> -		goto exit;
> -	}
> -
> -	pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
> -	if (!pcdev) {
> -		dev_err(&pdev->dev, "Could not allocate pcdev\n");
> -		err = -ENOMEM;
> -		goto exit_put_clk;
> -	}
> -
> -	pcdev->res = res;
> -	pcdev->clk = clk;
> -
> -	pcdev->pdata = pdev->dev.platform_data;
> -
> -	if (pcdev->pdata)
> -		pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
> -
> -	if (!pcdev->mclk) {
> -		dev_warn(&pdev->dev,
> -			 "mclk_10khz == 0! Please, fix your platform data. "
> -			 "Using default 20MHz\n");
> -		pcdev->mclk = 20000000;
> -	}
> -
> -	INIT_LIST_HEAD(&pcdev->capture);
> -	spin_lock_init(&pcdev->lock);
> -
> -	/*
> -	 * Request the regions.
> -	 */
> -	if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) {
> -		err = -EBUSY;
> -		goto exit_kfree;
> -	}
> -
> -	base = ioremap(res->start, resource_size(res));
> -	if (!base) {
> -		err = -ENOMEM;
> -		goto exit_release;
> -	}
> -	pcdev->irq = irq;
> -	pcdev->base = base;
> -
> -	/* request dma */
> -	pcdev->dma_chan = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_HIGH);
> -	if (pcdev->dma_chan < 0) {
> -		dev_err(&pdev->dev, "Can't request DMA for MX1 CSI\n");
> -		err = -EBUSY;
> -		goto exit_iounmap;
> -	}
> -	dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chan);
> -
> -	imx_dma_setup_handlers(pcdev->dma_chan, mx1_camera_dma_irq, NULL,
> -			       pcdev);
> -
> -	imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO,
> -			       IMX_DMA_MEMSIZE_32, MX1_DMA_REQ_CSI_R, 0);
> -	/* burst length : 16 words = 64 bytes */
> -	imx_dma_config_burstlen(pcdev->dma_chan, 0);
> -
> -	/* request irq */
> -	err = claim_fiq(&fh);
> -	if (err) {
> -		dev_err(&pdev->dev, "Camera interrupt register failed\n");
> -		goto exit_free_dma;
> -	}
> -
> -	set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end -
> -						   &mx1_camera_sof_fiq_start);
> -
> -	regs.ARM_r8 = (long)MX1_DMA_DIMR;
> -	regs.ARM_r9 = (long)MX1_DMA_CCR(pcdev->dma_chan);
> -	regs.ARM_r10 = (long)pcdev->base + CSICR1;
> -	regs.ARM_fp = (long)pcdev->base + CSISR;
> -	regs.ARM_sp = 1 << pcdev->dma_chan;
> -	set_fiq_regs(&regs);
> -
> -	mxc_set_irq_fiq(irq, 1);
> -	enable_fiq(irq);
> -
> -	pcdev->soc_host.drv_name	= DRIVER_NAME;
> -	pcdev->soc_host.ops		= &mx1_soc_camera_host_ops;
> -	pcdev->soc_host.priv		= pcdev;
> -	pcdev->soc_host.v4l2_dev.dev	= &pdev->dev;
> -	pcdev->soc_host.nr		= pdev->id;
> -	err = soc_camera_host_register(&pcdev->soc_host);
> -	if (err)
> -		goto exit_free_irq;
> -
> -	dev_info(&pdev->dev, "MX1 Camera driver loaded\n");
> -
> -	return 0;
> -
> -exit_free_irq:
> -	disable_fiq(irq);
> -	mxc_set_irq_fiq(irq, 0);
> -	release_fiq(&fh);
> -exit_free_dma:
> -	imx_dma_free(pcdev->dma_chan);
> -exit_iounmap:
> -	iounmap(base);
> -exit_release:
> -	release_mem_region(res->start, resource_size(res));
> -exit_kfree:
> -	kfree(pcdev);
> -exit_put_clk:
> -	clk_put(clk);
> -exit:
> -	return err;
> -}
> -
> -static int __exit mx1_camera_remove(struct platform_device *pdev)
> -{
> -	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
> -	struct mx1_camera_dev *pcdev = container_of(soc_host,
> -					struct mx1_camera_dev, soc_host);
> -	struct resource *res;
> -
> -	imx_dma_free(pcdev->dma_chan);
> -	disable_fiq(pcdev->irq);
> -	mxc_set_irq_fiq(pcdev->irq, 0);
> -	release_fiq(&fh);
> -
> -	clk_put(pcdev->clk);
> -
> -	soc_camera_host_unregister(soc_host);
> -
> -	iounmap(pcdev->base);
> -
> -	res = pcdev->res;
> -	release_mem_region(res->start, resource_size(res));
> -
> -	kfree(pcdev);
> -
> -	dev_info(&pdev->dev, "MX1 Camera driver unloaded\n");
> -
> -	return 0;
> -}
> -
> -static struct platform_driver mx1_camera_driver = {
> -	.driver		= {
> -		.name	= DRIVER_NAME,
> -	},
> -	.remove		= __exit_p(mx1_camera_remove),
> -};
> -
> -module_platform_driver_probe(mx1_camera_driver, mx1_camera_probe);
> -
> -MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver");
> -MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>");
> -MODULE_LICENSE("GPL v2");
> -MODULE_VERSION(DRIVER_VERSION);
> -MODULE_ALIAS("platform:" DRIVER_NAME);
> diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h
> deleted file mode 100644
> index 4fd6c70..0000000
> --- a/include/linux/platform_data/camera-mx1.h
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -/*
> - * mx1_camera.h - i.MX1/i.MXL camera driver header file
> - *
> - * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
> - * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
> - *
> - * Based on PXA camera.h file:
> - * Copyright (C) 2003, Intel Corporation
> - * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -#ifndef __ASM_ARCH_CAMERA_H_
> -#define __ASM_ARCH_CAMERA_H_
> -
> -#define MX1_CAMERA_DATA_HIGH	1
> -#define MX1_CAMERA_PCLK_RISING	2
> -#define MX1_CAMERA_VSYNC_HIGH	4
> -
> -extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
> -
> -/**
> - * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
> - * @mclk_10khz:	master clock frequency in 10kHz units
> - * @flags:	MX1 camera platform flags
> - */
> -struct mx1_camera_pdata {
> -	unsigned long mclk_10khz;
> -	unsigned long flags;
> -};
> -
> -#endif /* __ASM_ARCH_CAMERA_H_ */
>
Shawn Guo May 12, 2014, 2:09 p.m. UTC | #3
On Sun, May 11, 2014 at 10:09:11AM +0400, Alexander Shiyan wrote:
> That driver hasn't been really maintained for a long time. It doesn't
> compile in any way, it includes non-existent headers, has no users,
> and marked as "broken" more than year. Due to these factors, mx1_camera
> is now removed from the tree.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
>  arch/arm/mach-imx/Makefile                      |   3 -
>  arch/arm/mach-imx/devices/Kconfig               |   3 -
>  arch/arm/mach-imx/devices/Makefile              |   1 -
>  arch/arm/mach-imx/devices/devices-common.h      |  10 -
>  arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
>  arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
>  arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
>  drivers/media/platform/soc_camera/Kconfig       |  13 -
>  drivers/media/platform/soc_camera/Makefile      |   1 -
>  drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
>  include/linux/platform_data/camera-mx1.h        |  35 -
>  11 files changed, 1027 deletions(-)
>  delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
>  delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
>  delete mode 100644 include/linux/platform_data/camera-mx1.h

Can this patch be split into arch and driver part?  Recently, arm-soc
folks do not want to have arch changes go via driver tree, unless that's
absolutely necessary.

Shawn
Alexander Shiyan May 12, 2014, 2:18 p.m. UTC | #4
Mon, 12 May 2014 22:09:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
> On Sun, May 11, 2014 at 10:09:11AM +0400, Alexander Shiyan wrote:
> > That driver hasn't been really maintained for a long time. It doesn't
> > compile in any way, it includes non-existent headers, has no users,
> > and marked as "broken" more than year. Due to these factors, mx1_camera
> > is now removed from the tree.
> > 
> > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > ---
> >  arch/arm/mach-imx/Makefile                      |   3 -
> >  arch/arm/mach-imx/devices/Kconfig               |   3 -
> >  arch/arm/mach-imx/devices/Makefile              |   1 -
> >  arch/arm/mach-imx/devices/devices-common.h      |  10 -
> >  arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
> >  arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
> >  arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
> >  drivers/media/platform/soc_camera/Kconfig       |  13 -
> >  drivers/media/platform/soc_camera/Makefile      |   1 -
> >  drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
> >  include/linux/platform_data/camera-mx1.h        |  35 -
> >  11 files changed, 1027 deletions(-)
> >  delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
> >  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
> >  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
> >  delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
> >  delete mode 100644 include/linux/platform_data/camera-mx1.h
> 
> Can this patch be split into arch and driver part?  Recently, arm-soc
> folks do not want to have arch changes go via driver tree, unless that's
> absolutely necessary.

Can this patch be applied through arm-soc (imx) tree if it will be approved
by the linux-media maintainers?

---
Shawn Guo May 12, 2014, 2:25 p.m. UTC | #5
On Mon, May 12, 2014 at 06:18:00PM +0400, Alexander Shiyan wrote:
> Mon, 12 May 2014 22:09:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
> > On Sun, May 11, 2014 at 10:09:11AM +0400, Alexander Shiyan wrote:
> > > That driver hasn't been really maintained for a long time. It doesn't
> > > compile in any way, it includes non-existent headers, has no users,
> > > and marked as "broken" more than year. Due to these factors, mx1_camera
> > > is now removed from the tree.
> > > 
> > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > > ---
> > >  arch/arm/mach-imx/Makefile                      |   3 -
> > >  arch/arm/mach-imx/devices/Kconfig               |   3 -
> > >  arch/arm/mach-imx/devices/Makefile              |   1 -
> > >  arch/arm/mach-imx/devices/devices-common.h      |  10 -
> > >  arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
> > >  arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
> > >  arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
> > >  drivers/media/platform/soc_camera/Kconfig       |  13 -
> > >  drivers/media/platform/soc_camera/Makefile      |   1 -
> > >  drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
> > >  include/linux/platform_data/camera-mx1.h        |  35 -
> > >  11 files changed, 1027 deletions(-)
> > >  delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
> > >  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
> > >  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
> > >  delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
> > >  delete mode 100644 include/linux/platform_data/camera-mx1.h
> > 
> > Can this patch be split into arch and driver part?  Recently, arm-soc
> > folks do not want to have arch changes go via driver tree, unless that's
> > absolutely necessary.
> 
> Can this patch be applied through arm-soc (imx) tree if it will be approved
> by the linux-media maintainers?

Yes, it can, if linux-media maintainers want.  But I still prefer to two
patches, since I do not see any thing requiring it be one.  Doing that
will ensure we do not run into any merge conflicts.

Shawn
Alexander Shiyan May 12, 2014, 3:46 p.m. UTC | #6
Mon, 12 May 2014 22:25:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
> On Mon, May 12, 2014 at 06:18:00PM +0400, Alexander Shiyan wrote:
> > Mon, 12 May 2014 22:09:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
> > > On Sun, May 11, 2014 at 10:09:11AM +0400, Alexander Shiyan wrote:
> > > > That driver hasn't been really maintained for a long time. It doesn't
> > > > compile in any way, it includes non-existent headers, has no users,
> > > > and marked as "broken" more than year. Due to these factors, mx1_camera
> > > > is now removed from the tree.
> > > > 
> > > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > > > ---
> > > >  arch/arm/mach-imx/Makefile                      |   3 -
> > > >  arch/arm/mach-imx/devices/Kconfig               |   3 -
> > > >  arch/arm/mach-imx/devices/Makefile              |   1 -
> > > >  arch/arm/mach-imx/devices/devices-common.h      |  10 -
> > > >  arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
> > > >  arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
> > > >  arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
> > > >  drivers/media/platform/soc_camera/Kconfig       |  13 -
> > > >  drivers/media/platform/soc_camera/Makefile      |   1 -
> > > >  drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
> > > >  include/linux/platform_data/camera-mx1.h        |  35 -
> > > >  11 files changed, 1027 deletions(-)
> > > >  delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
> > > >  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
> > > >  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
> > > >  delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
> > > >  delete mode 100644 include/linux/platform_data/camera-mx1.h
> > > 
> > > Can this patch be split into arch and driver part?  Recently, arm-soc
> > > folks do not want to have arch changes go via driver tree, unless that's
> > > absolutely necessary.
> > 
> > Can this patch be applied through arm-soc (imx) tree if it will be approved
> > by the linux-media maintainers?
> 
> Yes, it can, if linux-media maintainers want.  But I still prefer to two
> patches, since I do not see any thing requiring it be one.  Doing that
> will ensure we do not run into any merge conflicts.

ARM part and linux-media part are interconnected by using single header
<linux/platform_data/camera-mx1.h>. So removing a driver in a separated
patch will touch ARM part in any case.

---
Hans Verkuil May 12, 2014, 4:39 p.m. UTC | #7
On 05/12/2014 05:46 PM, Alexander Shiyan wrote:
> Mon, 12 May 2014 22:25:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
>> On Mon, May 12, 2014 at 06:18:00PM +0400, Alexander Shiyan wrote:
>>> Mon, 12 May 2014 22:09:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
>>>> On Sun, May 11, 2014 at 10:09:11AM +0400, Alexander Shiyan wrote:
>>>>> That driver hasn't been really maintained for a long time. It doesn't
>>>>> compile in any way, it includes non-existent headers, has no users,
>>>>> and marked as "broken" more than year. Due to these factors, mx1_camera
>>>>> is now removed from the tree.
>>>>>
>>>>> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
>>>>> ---
>>>>>  arch/arm/mach-imx/Makefile                      |   3 -
>>>>>  arch/arm/mach-imx/devices/Kconfig               |   3 -
>>>>>  arch/arm/mach-imx/devices/Makefile              |   1 -
>>>>>  arch/arm/mach-imx/devices/devices-common.h      |  10 -
>>>>>  arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
>>>>>  arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
>>>>>  arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
>>>>>  drivers/media/platform/soc_camera/Kconfig       |  13 -
>>>>>  drivers/media/platform/soc_camera/Makefile      |   1 -
>>>>>  drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
>>>>>  include/linux/platform_data/camera-mx1.h        |  35 -
>>>>>  11 files changed, 1027 deletions(-)
>>>>>  delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
>>>>>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
>>>>>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
>>>>>  delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
>>>>>  delete mode 100644 include/linux/platform_data/camera-mx1.h
>>>>
>>>> Can this patch be split into arch and driver part?  Recently, arm-soc
>>>> folks do not want to have arch changes go via driver tree, unless that's
>>>> absolutely necessary.
>>>
>>> Can this patch be applied through arm-soc (imx) tree if it will be approved
>>> by the linux-media maintainers?
>>
>> Yes, it can, if linux-media maintainers want.  But I still prefer to two
>> patches, since I do not see any thing requiring it be one.  Doing that
>> will ensure we do not run into any merge conflicts.
> 
> ARM part and linux-media part are interconnected by using single header
> <linux/platform_data/camera-mx1.h>. So removing a driver in a separated
> patch will touch ARM part in any case.

But the linux-media driver depends on BROKEN, so that isn't build in any
case, right?

Regards,

	Hans
Guennadi Liakhovetski May 18, 2014, 8:36 p.m. UTC | #8
On Mon, 12 May 2014, Hans Verkuil wrote:

> On 05/12/2014 05:46 PM, Alexander Shiyan wrote:
> > Mon, 12 May 2014 22:25:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
> >> On Mon, May 12, 2014 at 06:18:00PM +0400, Alexander Shiyan wrote:
> >>> Mon, 12 May 2014 22:09:34 +0800 ?? Shawn Guo <shawn.guo@freescale.com>:
> >>>> On Sun, May 11, 2014 at 10:09:11AM +0400, Alexander Shiyan wrote:
> >>>>> That driver hasn't been really maintained for a long time. It doesn't
> >>>>> compile in any way, it includes non-existent headers, has no users,
> >>>>> and marked as "broken" more than year. Due to these factors, mx1_camera
> >>>>> is now removed from the tree.
> >>>>>
> >>>>> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> >>>>> ---
> >>>>>  arch/arm/mach-imx/Makefile                      |   3 -
> >>>>>  arch/arm/mach-imx/devices/Kconfig               |   3 -
> >>>>>  arch/arm/mach-imx/devices/Makefile              |   1 -
> >>>>>  arch/arm/mach-imx/devices/devices-common.h      |  10 -
> >>>>>  arch/arm/mach-imx/devices/platform-mx1-camera.c |  42 --
> >>>>>  arch/arm/mach-imx/mx1-camera-fiq-ksym.c         |  18 -
> >>>>>  arch/arm/mach-imx/mx1-camera-fiq.S              |  35 -
> >>>>>  drivers/media/platform/soc_camera/Kconfig       |  13 -
> >>>>>  drivers/media/platform/soc_camera/Makefile      |   1 -
> >>>>>  drivers/media/platform/soc_camera/mx1_camera.c  | 866 ------------------------
> >>>>>  include/linux/platform_data/camera-mx1.h        |  35 -
> >>>>>  11 files changed, 1027 deletions(-)
> >>>>>  delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c
> >>>>>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
> >>>>>  delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
> >>>>>  delete mode 100644 drivers/media/platform/soc_camera/mx1_camera.c
> >>>>>  delete mode 100644 include/linux/platform_data/camera-mx1.h
> >>>>
> >>>> Can this patch be split into arch and driver part?  Recently, arm-soc
> >>>> folks do not want to have arch changes go via driver tree, unless that's
> >>>> absolutely necessary.
> >>>
> >>> Can this patch be applied through arm-soc (imx) tree if it will be approved
> >>> by the linux-media maintainers?
> >>
> >> Yes, it can, if linux-media maintainers want.  But I still prefer to two
> >> patches, since I do not see any thing requiring it be one.  Doing that
> >> will ensure we do not run into any merge conflicts.
> > 
> > ARM part and linux-media part are interconnected by using single header
> > <linux/platform_data/camera-mx1.h>. So removing a driver in a separated
> > patch will touch ARM part in any case.
> 
> But the linux-media driver depends on BROKEN, so that isn't build in any
> case, right?

Either way works for me. You can have my

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

if it is pulled via the ARM tree or you can split it into two patches and 
I can take the V4L part via my tree. In that case maybe it would be better 
to either guarantee, that the arch part is applied first or you leave the 
header for the next version or you remove it together with the arch part, 
not the driver part.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
diff mbox

Patch

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8dd377b..0bdec2a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -38,9 +38,6 @@  obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
 
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
-
 # i.MX1 based machines
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 2d260a5..846c019 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -49,9 +49,6 @@  config IMX_HAVE_PLATFORM_IMX_UDC
 config IMX_HAVE_PLATFORM_IPU_CORE
 	bool
 
-config IMX_HAVE_PLATFORM_MX1_CAMERA
-	bool
-
 config IMX_HAVE_PLATFORM_MX2_CAMERA
 	bool
 
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 1cbc14c..d421c34 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -18,7 +18,6 @@  obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 61352a8..c8169da 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -208,16 +208,6 @@  struct platform_device *__init imx_add_mx3_sdc_fb(
 		const struct imx_ipu_core_data *data,
 		struct mx3fb_platform_data *pdata);
 
-#include <linux/platform_data/camera-mx1.h>
-struct imx_mx1_camera_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx1_camera(
-		const struct imx_mx1_camera_data *data,
-		const struct mx1_camera_pdata *pdata);
-
 #include <linux/platform_data/camera-mx2.h>
 struct imx_mx2_camera_data {
 	const char *devid;
diff --git a/arch/arm/mach-imx/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c
deleted file mode 100644
index 2c67881..0000000
--- a/arch/arm/mach-imx/devices/platform-mx1-camera.c
+++ /dev/null
@@ -1,42 +0,0 @@ 
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx1_camera_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _CSI ## _BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq = soc ## _INT_CSI,					\
-	}
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
-	imx_mx1_camera_data_entry_single(MX1, 10);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_mx1_camera(
-		const struct imx_mx1_camera_data *data,
-		const struct mx1_camera_pdata *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("mx1-camera", 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
deleted file mode 100644
index fb38436..0000000
--- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
+++ /dev/null
@@ -1,18 +0,0 @@ 
-/*
- * Exported ksyms of ARCH_MX1
- *
- * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-
-#include <linux/platform_data/camera-mx1.h>
-
-/* IMX camera FIQ handler */
-EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
-EXPORT_SYMBOL(mx1_camera_sof_fiq_end);
diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
deleted file mode 100644
index 9c69aa6..0000000
--- a/arch/arm/mach-imx/mx1-camera-fiq.S
+++ /dev/null
@@ -1,35 +0,0 @@ 
-/*
- *  Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- *  Based on linux/arch/arm/lib/floppydma.S
- *      Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-		.global	mx1_camera_sof_fiq_end
-		.global	mx1_camera_sof_fiq_start
-mx1_camera_sof_fiq_start:
-		@ enable dma
-		ldr	r12, [r9]
-		orr	r12, r12, #0x00000001
-		str	r12, [r9]
-		@ unmask DMA interrupt
-		ldr	r12, [r8]
-		bic	r12, r12, r13
-		str	r12, [r8]
-		@ disable SOF interrupt
-		ldr	r12, [r10]
-		bic	r12, r12, #0x00010000
-		str	r12, [r10]
-		@ clear SOF flag
-		mov	r12, #0x00010000
-		str	r12, [r11]
-		@ return from FIQ
-		subs	pc, lr, #4
-mx1_camera_sof_fiq_end:
diff --git a/drivers/media/platform/soc_camera/Kconfig b/drivers/media/platform/soc_camera/Kconfig
index af39c46..122e03a 100644
--- a/drivers/media/platform/soc_camera/Kconfig
+++ b/drivers/media/platform/soc_camera/Kconfig
@@ -17,19 +17,6 @@  config SOC_CAMERA_PLATFORM
 	help
 	  This is a generic SoC camera platform driver, useful for testing
 
-config MX1_VIDEO
-	bool
-
-config VIDEO_MX1
-	tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
-	depends on BROKEN
-	depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
-	select FIQ
-	select VIDEOBUF_DMA_CONTIG
-	select MX1_VIDEO
-	---help---
-	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
-
 config VIDEO_MX3
 	tristate "i.MX3x Camera Sensor Interface driver"
 	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
diff --git a/drivers/media/platform/soc_camera/Makefile b/drivers/media/platform/soc_camera/Makefile
index 8aed26d..2826382 100644
--- a/drivers/media/platform/soc_camera/Makefile
+++ b/drivers/media/platform/soc_camera/Makefile
@@ -7,7 +7,6 @@  obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
 
 # soc-camera host drivers have to be linked after camera drivers
 obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel-isi.o
-obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
 obj-$(CONFIG_VIDEO_MX2)			+= mx2_camera.o
 obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
 obj-$(CONFIG_VIDEO_OMAP1)		+= omap1_camera.o
diff --git a/drivers/media/platform/soc_camera/mx1_camera.c b/drivers/media/platform/soc_camera/mx1_camera.c
deleted file mode 100644
index fea3e61..0000000
--- a/drivers/media/platform/soc_camera/mx1_camera.c
+++ /dev/null
@@ -1,866 +0,0 @@ 
-/*
- * V4L2 Driver for i.MXL/i.MXL camera (CSI) host
- *
- * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA SoC camera driver
- * Copyright (C) 2006, Sascha Hauer, Pengutronix
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/videodev2.h>
-
-#include <media/soc_camera.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-dev.h>
-#include <media/videobuf-dma-contig.h>
-#include <media/soc_mediabus.h>
-
-#include <asm/dma.h>
-#include <asm/fiq.h>
-#include <mach/dma-mx1-mx2.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <linux/platform_data/camera-mx1.h>
-
-/*
- * CSI registers
- */
-#define CSICR1		0x00			/* CSI Control Register 1 */
-#define CSISR		0x08			/* CSI Status Register */
-#define CSIRXR		0x10			/* CSI RxFIFO Register */
-
-#define CSICR1_RXFF_LEVEL(x)	(((x) & 0x3) << 19)
-#define CSICR1_SOF_POL		(1 << 17)
-#define CSICR1_SOF_INTEN	(1 << 16)
-#define CSICR1_MCLKDIV(x)	(((x) & 0xf) << 12)
-#define CSICR1_MCLKEN		(1 << 9)
-#define CSICR1_FCC		(1 << 8)
-#define CSICR1_BIG_ENDIAN	(1 << 7)
-#define CSICR1_CLR_RXFIFO	(1 << 5)
-#define CSICR1_GCLK_MODE	(1 << 4)
-#define CSICR1_DATA_POL		(1 << 2)
-#define CSICR1_REDGE		(1 << 1)
-#define CSICR1_EN		(1 << 0)
-
-#define CSISR_SFF_OR_INT	(1 << 25)
-#define CSISR_RFF_OR_INT	(1 << 24)
-#define CSISR_STATFF_INT	(1 << 21)
-#define CSISR_RXFF_INT		(1 << 18)
-#define CSISR_SOF_INT		(1 << 16)
-#define CSISR_DRDY		(1 << 0)
-
-#define DRIVER_VERSION "0.0.2"
-#define DRIVER_NAME "mx1-camera"
-
-#define CSI_IRQ_MASK	(CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
-			CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT)
-
-#define CSI_BUS_FLAGS	(V4L2_MBUS_MASTER | V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
-			V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | \
-			V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
-			V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_LOW)
-
-#define MAX_VIDEO_MEM 16	/* Video memory limit in megabytes */
-
-/*
- * Structures
- */
-
-/* buffer for one video frame */
-struct mx1_buffer {
-	/* common v4l buffer stuff -- must be first */
-	struct videobuf_buffer		vb;
-	enum v4l2_mbus_pixelcode	code;
-	int				inwork;
-};
-
-/*
- * i.MX1/i.MXL is only supposed to handle one camera on its Camera Sensor
- * Interface. If anyone ever builds hardware to enable more than
- * one camera, they will have to modify this driver too
- */
-struct mx1_camera_dev {
-	struct soc_camera_host		soc_host;
-	struct mx1_camera_pdata		*pdata;
-	struct mx1_buffer		*active;
-	struct resource			*res;
-	struct clk			*clk;
-	struct list_head		capture;
-
-	void __iomem			*base;
-	int				dma_chan;
-	unsigned int			irq;
-	unsigned long			mclk;
-
-	spinlock_t			lock;
-};
-
-/*
- *  Videobuf operations
- */
-static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
-			      unsigned int *size)
-{
-	struct soc_camera_device *icd = vq->priv_data;
-
-	*size = icd->sizeimage;
-
-	if (!*count)
-		*count = 32;
-
-	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
-		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
-
-	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
-
-	return 0;
-}
-
-static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
-{
-	struct soc_camera_device *icd = vq->priv_data;
-	struct videobuf_buffer *vb = &buf->vb;
-
-	BUG_ON(in_interrupt());
-
-	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
-		vb, vb->baddr, vb->bsize);
-
-	/*
-	 * This waits until this buffer is out of danger, i.e., until it is no
-	 * longer in STATE_QUEUED or STATE_ACTIVE
-	 */
-	videobuf_waiton(vq, vb, 0, 0);
-	videobuf_dma_contig_free(vq, vb);
-
-	vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static int mx1_videobuf_prepare(struct videobuf_queue *vq,
-		struct videobuf_buffer *vb, enum v4l2_field field)
-{
-	struct soc_camera_device *icd = vq->priv_data;
-	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
-	int ret;
-
-	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
-		vb, vb->baddr, vb->bsize);
-
-	/* Added list head initialization on alloc */
-	WARN_ON(!list_empty(&vb->queue));
-
-	BUG_ON(NULL == icd->current_fmt);
-
-	/*
-	 * I think, in buf_prepare you only have to protect global data,
-	 * the actual buffer is yours
-	 */
-	buf->inwork = 1;
-
-	if (buf->code	!= icd->current_fmt->code ||
-	    vb->width	!= icd->user_width ||
-	    vb->height	!= icd->user_height ||
-	    vb->field	!= field) {
-		buf->code	= icd->current_fmt->code;
-		vb->width	= icd->user_width;
-		vb->height	= icd->user_height;
-		vb->field	= field;
-		vb->state	= VIDEOBUF_NEEDS_INIT;
-	}
-
-	vb->size = icd->sizeimage;
-	if (0 != vb->baddr && vb->bsize < vb->size) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (vb->state == VIDEOBUF_NEEDS_INIT) {
-		ret = videobuf_iolock(vq, vb, NULL);
-		if (ret)
-			goto fail;
-
-		vb->state = VIDEOBUF_PREPARED;
-	}
-
-	buf->inwork = 0;
-
-	return 0;
-
-fail:
-	free_buffer(vq, buf);
-out:
-	buf->inwork = 0;
-	return ret;
-}
-
-static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
-{
-	struct videobuf_buffer *vbuf = &pcdev->active->vb;
-	struct device *dev = pcdev->soc_host.icd->parent;
-	int ret;
-
-	if (unlikely(!pcdev->active)) {
-		dev_err(dev, "DMA End IRQ with no active buffer\n");
-		return -EFAULT;
-	}
-
-	/* setup sg list for future DMA */
-	ret = imx_dma_setup_single(pcdev->dma_chan,
-		videobuf_to_dma_contig(vbuf),
-		vbuf->size, pcdev->res->start +
-		CSIRXR, DMA_MODE_READ);
-	if (unlikely(ret))
-		dev_err(dev, "Failed to setup DMA sg list\n");
-
-	return ret;
-}
-
-/* Called under spinlock_irqsave(&pcdev->lock, ...) */
-static void mx1_videobuf_queue(struct videobuf_queue *vq,
-						struct videobuf_buffer *vb)
-{
-	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx1_camera_dev *pcdev = ici->priv;
-	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
-
-	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
-		vb, vb->baddr, vb->bsize);
-
-	list_add_tail(&vb->queue, &pcdev->capture);
-
-	vb->state = VIDEOBUF_ACTIVE;
-
-	if (!pcdev->active) {
-		pcdev->active = buf;
-
-		/* setup sg list for future DMA */
-		if (!mx1_camera_setup_dma(pcdev)) {
-			unsigned int temp;
-			/* enable SOF irq */
-			temp = __raw_readl(pcdev->base + CSICR1) |
-							CSICR1_SOF_INTEN;
-			__raw_writel(temp, pcdev->base + CSICR1);
-		}
-	}
-}
-
-static void mx1_videobuf_release(struct videobuf_queue *vq,
-				 struct videobuf_buffer *vb)
-{
-	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
-#ifdef DEBUG
-	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->parent;
-
-	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
-		vb, vb->baddr, vb->bsize);
-
-	switch (vb->state) {
-	case VIDEOBUF_ACTIVE:
-		dev_dbg(dev, "%s (active)\n", __func__);
-		break;
-	case VIDEOBUF_QUEUED:
-		dev_dbg(dev, "%s (queued)\n", __func__);
-		break;
-	case VIDEOBUF_PREPARED:
-		dev_dbg(dev, "%s (prepared)\n", __func__);
-		break;
-	default:
-		dev_dbg(dev, "%s (unknown)\n", __func__);
-		break;
-	}
-#endif
-
-	free_buffer(vq, buf);
-}
-
-static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
-			      struct videobuf_buffer *vb,
-			      struct mx1_buffer *buf)
-{
-	/* _init is used to debug races, see comment in mx1_camera_reqbufs() */
-	list_del_init(&vb->queue);
-	vb->state = VIDEOBUF_DONE;
-	v4l2_get_timestamp(&vb->ts);
-	vb->field_count++;
-	wake_up(&vb->done);
-
-	if (list_empty(&pcdev->capture)) {
-		pcdev->active = NULL;
-		return;
-	}
-
-	pcdev->active = list_entry(pcdev->capture.next,
-				   struct mx1_buffer, vb.queue);
-
-	/* setup sg list for future DMA */
-	if (likely(!mx1_camera_setup_dma(pcdev))) {
-		unsigned int temp;
-
-		/* enable SOF irq */
-		temp = __raw_readl(pcdev->base + CSICR1) | CSICR1_SOF_INTEN;
-		__raw_writel(temp, pcdev->base + CSICR1);
-	}
-}
-
-static void mx1_camera_dma_irq(int channel, void *data)
-{
-	struct mx1_camera_dev *pcdev = data;
-	struct device *dev = pcdev->soc_host.icd->parent;
-	struct mx1_buffer *buf;
-	struct videobuf_buffer *vb;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pcdev->lock, flags);
-
-	imx_dma_disable(channel);
-
-	if (unlikely(!pcdev->active)) {
-		dev_err(dev, "DMA End IRQ with no active buffer\n");
-		goto out;
-	}
-
-	vb = &pcdev->active->vb;
-	buf = container_of(vb, struct mx1_buffer, vb);
-	WARN_ON(buf->inwork || list_empty(&vb->queue));
-	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
-		vb, vb->baddr, vb->bsize);
-
-	mx1_camera_wakeup(pcdev, vb, buf);
-out:
-	spin_unlock_irqrestore(&pcdev->lock, flags);
-}
-
-static struct videobuf_queue_ops mx1_videobuf_ops = {
-	.buf_setup	= mx1_videobuf_setup,
-	.buf_prepare	= mx1_videobuf_prepare,
-	.buf_queue	= mx1_videobuf_queue,
-	.buf_release	= mx1_videobuf_release,
-};
-
-static void mx1_camera_init_videobuf(struct videobuf_queue *q,
-				     struct soc_camera_device *icd)
-{
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx1_camera_dev *pcdev = ici->priv;
-
-	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->parent,
-				&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
-				V4L2_FIELD_NONE,
-				sizeof(struct mx1_buffer), icd, &ici->host_lock);
-}
-
-static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
-{
-	unsigned int mclk = pcdev->mclk;
-	unsigned long div;
-	unsigned long lcdclk;
-
-	lcdclk = clk_get_rate(pcdev->clk);
-
-	/*
-	 * We verify platform_mclk_10khz != 0, so if anyone breaks it, here
-	 * they get a nice Oops
-	 */
-	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
-
-	dev_dbg(pcdev->soc_host.icd->parent,
-		"System clock %lukHz, target freq %dkHz, divisor %lu\n",
-		lcdclk / 1000, mclk / 1000, div);
-
-	return div;
-}
-
-static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
-{
-	unsigned int csicr1 = CSICR1_EN;
-
-	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "Activate device\n");
-
-	clk_prepare_enable(pcdev->clk);
-
-	/* enable CSI before doing anything else */
-	__raw_writel(csicr1, pcdev->base + CSICR1);
-
-	csicr1 |= CSICR1_MCLKEN | CSICR1_FCC | CSICR1_GCLK_MODE;
-	csicr1 |= CSICR1_MCLKDIV(mclk_get_divisor(pcdev));
-	csicr1 |= CSICR1_RXFF_LEVEL(2); /* 16 words */
-
-	__raw_writel(csicr1, pcdev->base + CSICR1);
-}
-
-static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
-{
-	dev_dbg(pcdev->soc_host.v4l2_dev.dev, "Deactivate device\n");
-
-	/* Disable all CSI interface */
-	__raw_writel(0x00, pcdev->base + CSICR1);
-
-	clk_disable_unprepare(pcdev->clk);
-}
-
-static int mx1_camera_add_device(struct soc_camera_device *icd)
-{
-	dev_info(icd->parent, "MX1 Camera driver attached to camera %d\n",
-		 icd->devnum);
-
-	return 0;
-}
-
-static void mx1_camera_remove_device(struct soc_camera_device *icd)
-{
-	dev_info(icd->parent, "MX1 Camera driver detached from camera %d\n",
-		 icd->devnum);
-}
-
-/*
- * The following two functions absolutely depend on the fact, that
- * there can be only one camera on i.MX1/i.MXL camera sensor interface
- */
-static int mx1_camera_clock_start(struct soc_camera_host *ici)
-{
-	struct mx1_camera_dev *pcdev = ici->priv;
-
-	mx1_camera_activate(pcdev);
-
-	return 0;
-}
-
-static void mx1_camera_clock_stop(struct soc_camera_host *ici)
-{
-	struct mx1_camera_dev *pcdev = ici->priv;
-	unsigned int csicr1;
-
-	/* disable interrupts */
-	csicr1 = __raw_readl(pcdev->base + CSICR1) & ~CSI_IRQ_MASK;
-	__raw_writel(csicr1, pcdev->base + CSICR1);
-
-	/* Stop DMA engine */
-	imx_dma_disable(pcdev->dma_chan);
-
-	mx1_camera_deactivate(pcdev);
-}
-
-static int mx1_camera_set_bus_param(struct soc_camera_device *icd)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct mx1_camera_dev *pcdev = ici->priv;
-	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
-	unsigned long common_flags;
-	unsigned int csicr1;
-	int ret;
-
-	/* MX1 supports only 8bit buswidth */
-	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
-	if (!ret) {
-		common_flags = soc_mbus_config_compatible(&cfg, CSI_BUS_FLAGS);
-		if (!common_flags) {
-			dev_warn(icd->parent,
-				 "Flags incompatible: camera 0x%x, host 0x%x\n",
-				 cfg.flags, CSI_BUS_FLAGS);
-			return -EINVAL;
-		}
-	} else if (ret != -ENOIOCTLCMD) {
-		return ret;
-	} else {
-		common_flags = CSI_BUS_FLAGS;
-	}
-
-	/* Make choises, based on platform choice */
-	if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
-		(common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
-			if (!pcdev->pdata ||
-			     pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH)
-				common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
-			else
-				common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
-	}
-
-	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
-		(common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
-			if (!pcdev->pdata ||
-			     pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING)
-				common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
-			else
-				common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
-	}
-
-	if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
-		(common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
-			if (!pcdev->pdata ||
-			     pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH)
-				common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
-			else
-				common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
-	}
-
-	cfg.flags = common_flags;
-	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
-	if (ret < 0 && ret != -ENOIOCTLCMD) {
-		dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
-			common_flags, ret);
-		return ret;
-	}
-
-	csicr1 = __raw_readl(pcdev->base + CSICR1);
-
-	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
-		csicr1 |= CSICR1_REDGE;
-	if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
-		csicr1 |= CSICR1_SOF_POL;
-	if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
-		csicr1 |= CSICR1_DATA_POL;
-
-	__raw_writel(csicr1, pcdev->base + CSICR1);
-
-	return 0;
-}
-
-static int mx1_camera_set_fmt(struct soc_camera_device *icd,
-			      struct v4l2_format *f)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	const struct soc_camera_format_xlate *xlate;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_mbus_framefmt mf;
-	int ret, buswidth;
-
-	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
-	if (!xlate) {
-		dev_warn(icd->parent, "Format %x not found\n",
-			 pix->pixelformat);
-		return -EINVAL;
-	}
-
-	buswidth = xlate->host_fmt->bits_per_sample;
-	if (buswidth > 8) {
-		dev_warn(icd->parent,
-			 "bits-per-sample %d for format %x unsupported\n",
-			 buswidth, pix->pixelformat);
-		return -EINVAL;
-	}
-
-	mf.width	= pix->width;
-	mf.height	= pix->height;
-	mf.field	= pix->field;
-	mf.colorspace	= pix->colorspace;
-	mf.code		= xlate->code;
-
-	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
-	if (ret < 0)
-		return ret;
-
-	if (mf.code != xlate->code)
-		return -EINVAL;
-
-	pix->width		= mf.width;
-	pix->height		= mf.height;
-	pix->field		= mf.field;
-	pix->colorspace		= mf.colorspace;
-	icd->current_fmt	= xlate;
-
-	return ret;
-}
-
-static int mx1_camera_try_fmt(struct soc_camera_device *icd,
-			      struct v4l2_format *f)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	const struct soc_camera_format_xlate *xlate;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_mbus_framefmt mf;
-	int ret;
-	/* TODO: limit to mx1 hardware capabilities */
-
-	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
-	if (!xlate) {
-		dev_warn(icd->parent, "Format %x not found\n",
-			 pix->pixelformat);
-		return -EINVAL;
-	}
-
-	mf.width	= pix->width;
-	mf.height	= pix->height;
-	mf.field	= pix->field;
-	mf.colorspace	= pix->colorspace;
-	mf.code		= xlate->code;
-
-	/* limit to sensor capabilities */
-	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
-	if (ret < 0)
-		return ret;
-
-	pix->width	= mf.width;
-	pix->height	= mf.height;
-	pix->field	= mf.field;
-	pix->colorspace	= mf.colorspace;
-
-	return 0;
-}
-
-static int mx1_camera_reqbufs(struct soc_camera_device *icd,
-			      struct v4l2_requestbuffers *p)
-{
-	int i;
-
-	/*
-	 * This is for locking debugging only. I removed spinlocks and now I
-	 * check whether .prepare is ever called on a linked buffer, or whether
-	 * a dma IRQ can occur for an in-work or unlinked buffer. Until now
-	 * it hadn't triggered
-	 */
-	for (i = 0; i < p->count; i++) {
-		struct mx1_buffer *buf = container_of(icd->vb_vidq.bufs[i],
-						      struct mx1_buffer, vb);
-		buf->inwork = 0;
-		INIT_LIST_HEAD(&buf->vb.queue);
-	}
-
-	return 0;
-}
-
-static unsigned int mx1_camera_poll(struct file *file, poll_table *pt)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct mx1_buffer *buf;
-
-	buf = list_entry(icd->vb_vidq.stream.next, struct mx1_buffer,
-			 vb.stream);
-
-	poll_wait(file, &buf->vb.done, pt);
-
-	if (buf->vb.state == VIDEOBUF_DONE ||
-	    buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN | POLLRDNORM;
-
-	return 0;
-}
-
-static int mx1_camera_querycap(struct soc_camera_host *ici,
-			       struct v4l2_capability *cap)
-{
-	/* cap->name is set by the friendly caller:-> */
-	strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card));
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-
-	return 0;
-}
-
-static struct soc_camera_host_ops mx1_soc_camera_host_ops = {
-	.owner		= THIS_MODULE,
-	.add		= mx1_camera_add_device,
-	.remove		= mx1_camera_remove_device,
-	.clock_start	= mx1_camera_clock_start,
-	.clock_stop	= mx1_camera_clock_stop,
-	.set_bus_param	= mx1_camera_set_bus_param,
-	.set_fmt	= mx1_camera_set_fmt,
-	.try_fmt	= mx1_camera_try_fmt,
-	.init_videobuf	= mx1_camera_init_videobuf,
-	.reqbufs	= mx1_camera_reqbufs,
-	.poll		= mx1_camera_poll,
-	.querycap	= mx1_camera_querycap,
-};
-
-static struct fiq_handler fh = {
-	.name		= "csi_sof"
-};
-
-static int __init mx1_camera_probe(struct platform_device *pdev)
-{
-	struct mx1_camera_dev *pcdev;
-	struct resource *res;
-	struct pt_regs regs;
-	struct clk *clk;
-	void __iomem *base;
-	unsigned int irq;
-	int err = 0;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(pdev, 0);
-	if (!res || (int)irq <= 0) {
-		err = -ENODEV;
-		goto exit;
-	}
-
-	clk = clk_get(&pdev->dev, "csi_clk");
-	if (IS_ERR(clk)) {
-		err = PTR_ERR(clk);
-		goto exit;
-	}
-
-	pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
-	if (!pcdev) {
-		dev_err(&pdev->dev, "Could not allocate pcdev\n");
-		err = -ENOMEM;
-		goto exit_put_clk;
-	}
-
-	pcdev->res = res;
-	pcdev->clk = clk;
-
-	pcdev->pdata = pdev->dev.platform_data;
-
-	if (pcdev->pdata)
-		pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
-
-	if (!pcdev->mclk) {
-		dev_warn(&pdev->dev,
-			 "mclk_10khz == 0! Please, fix your platform data. "
-			 "Using default 20MHz\n");
-		pcdev->mclk = 20000000;
-	}
-
-	INIT_LIST_HEAD(&pcdev->capture);
-	spin_lock_init(&pcdev->lock);
-
-	/*
-	 * Request the regions.
-	 */
-	if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) {
-		err = -EBUSY;
-		goto exit_kfree;
-	}
-
-	base = ioremap(res->start, resource_size(res));
-	if (!base) {
-		err = -ENOMEM;
-		goto exit_release;
-	}
-	pcdev->irq = irq;
-	pcdev->base = base;
-
-	/* request dma */
-	pcdev->dma_chan = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_HIGH);
-	if (pcdev->dma_chan < 0) {
-		dev_err(&pdev->dev, "Can't request DMA for MX1 CSI\n");
-		err = -EBUSY;
-		goto exit_iounmap;
-	}
-	dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chan);
-
-	imx_dma_setup_handlers(pcdev->dma_chan, mx1_camera_dma_irq, NULL,
-			       pcdev);
-
-	imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO,
-			       IMX_DMA_MEMSIZE_32, MX1_DMA_REQ_CSI_R, 0);
-	/* burst length : 16 words = 64 bytes */
-	imx_dma_config_burstlen(pcdev->dma_chan, 0);
-
-	/* request irq */
-	err = claim_fiq(&fh);
-	if (err) {
-		dev_err(&pdev->dev, "Camera interrupt register failed\n");
-		goto exit_free_dma;
-	}
-
-	set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end -
-						   &mx1_camera_sof_fiq_start);
-
-	regs.ARM_r8 = (long)MX1_DMA_DIMR;
-	regs.ARM_r9 = (long)MX1_DMA_CCR(pcdev->dma_chan);
-	regs.ARM_r10 = (long)pcdev->base + CSICR1;
-	regs.ARM_fp = (long)pcdev->base + CSISR;
-	regs.ARM_sp = 1 << pcdev->dma_chan;
-	set_fiq_regs(&regs);
-
-	mxc_set_irq_fiq(irq, 1);
-	enable_fiq(irq);
-
-	pcdev->soc_host.drv_name	= DRIVER_NAME;
-	pcdev->soc_host.ops		= &mx1_soc_camera_host_ops;
-	pcdev->soc_host.priv		= pcdev;
-	pcdev->soc_host.v4l2_dev.dev	= &pdev->dev;
-	pcdev->soc_host.nr		= pdev->id;
-	err = soc_camera_host_register(&pcdev->soc_host);
-	if (err)
-		goto exit_free_irq;
-
-	dev_info(&pdev->dev, "MX1 Camera driver loaded\n");
-
-	return 0;
-
-exit_free_irq:
-	disable_fiq(irq);
-	mxc_set_irq_fiq(irq, 0);
-	release_fiq(&fh);
-exit_free_dma:
-	imx_dma_free(pcdev->dma_chan);
-exit_iounmap:
-	iounmap(base);
-exit_release:
-	release_mem_region(res->start, resource_size(res));
-exit_kfree:
-	kfree(pcdev);
-exit_put_clk:
-	clk_put(clk);
-exit:
-	return err;
-}
-
-static int __exit mx1_camera_remove(struct platform_device *pdev)
-{
-	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
-	struct mx1_camera_dev *pcdev = container_of(soc_host,
-					struct mx1_camera_dev, soc_host);
-	struct resource *res;
-
-	imx_dma_free(pcdev->dma_chan);
-	disable_fiq(pcdev->irq);
-	mxc_set_irq_fiq(pcdev->irq, 0);
-	release_fiq(&fh);
-
-	clk_put(pcdev->clk);
-
-	soc_camera_host_unregister(soc_host);
-
-	iounmap(pcdev->base);
-
-	res = pcdev->res;
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(pcdev);
-
-	dev_info(&pdev->dev, "MX1 Camera driver unloaded\n");
-
-	return 0;
-}
-
-static struct platform_driver mx1_camera_driver = {
-	.driver		= {
-		.name	= DRIVER_NAME,
-	},
-	.remove		= __exit_p(mx1_camera_remove),
-};
-
-module_platform_driver_probe(mx1_camera_driver, mx1_camera_probe);
-
-MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver");
-MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h
deleted file mode 100644
index 4fd6c70..0000000
--- a/include/linux/platform_data/camera-mx1.h
+++ /dev/null
@@ -1,35 +0,0 @@ 
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH	1
-#define MX1_CAMERA_PCLK_RISING	2
-#define MX1_CAMERA_VSYNC_HIGH	4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @flags:	MX1 camera platform flags
- */
-struct mx1_camera_pdata {
-	unsigned long mclk_10khz;
-	unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */