@@ -1 +1 @@
-obj-y += berlin2-avpll.o berlin2-pll.o
+obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o
new file mode 100644
@@ -0,0 +1,326 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "berlin2-div.h"
+
+/*
+ * Clock dividers in Berlin2 SoCs comprise a complex cell to select
+ * input pll and divider. The virtual structure as it is used in Marvell
+ * BSP code can be seen as:
+ *
+ * +---+
+ * pll0 --------------->| 0 | +---+
+ * +---+ |(B)|--+--------------->| 0 | +---+
+ * pll1.0 -->| 0 | +-->| 1 | | +--------+ |(E)|----->| 0 | +---+
+ * pll1.1 -->| 1 | | +---+ +-->|(C) 1:M |-->| 1 | |(F)|-->|(G)|->
+ * ... -->|(A)|--+ | +--------+ +---+ +-->| 1 | +---+
+ * ... -->| | +-->|(D) 1:3 |----------+ +---+
+ * pll1.N -->| N | +---------
+ * +---+
+ *
+ * (A) input pll clock mux controlled by <PllSelect[1:n]>
+ * (B) input pll bypass mux controlled by <PllSwitch>
+ * (C) programmable clock divider controlled by <Select[1:n]>
+ * (D) constant div-by-3 clock divider
+ * (E) programmable clock divider bypass controlled by <Switch>
+ * (F) constant div-by-3 clock mux controlled by <D3Switch>
+ * (G) clock gate controlled by <Enable>
+ *
+ * For whatever reason, above control signals come in two flavors:
+ * - single register dividers with all bits in one register
+ * - shared register dividers with bits spread over multiple registers
+ * (including signals for the same cell spread over consecutive registers)
+ *
+ * Also, clock gate and pll mux is not available on every div cell, so
+ * we have to deal with those, too. We reuse common clock composite driver
+ * for it.
+ */
+
+#define PLL_SELECT_MASK 0x7
+#define DIV_SELECT_MASK 0x7
+
+struct berlin2_div {
+ struct clk_hw hw;
+ void __iomem *base;
+ struct berlin2_div_map map;
+ spinlock_t *lock;
+};
+
+#define to_berlin2_div(hw) container_of(hw, struct berlin2_div, hw)
+
+static u8 clk_div[] = { 1, 2, 4, 6, 8, 12, 1, 1 };
+
+static int berlin2_div_is_enabled(struct clk_hw *hw)
+{
+ struct berlin2_div *div = to_berlin2_div(hw);
+ struct berlin2_div_map *map = &div->map;
+ u32 reg;
+
+ if (div->lock)
+ spin_lock(div->lock);
+
+ reg = readl_relaxed(div->base + map->gate_offs);
+ reg >>= map->gate_shift;
+
+ if (div->lock)
+ spin_unlock(div->lock);
+
+ return (reg & 0x1);
+}
+
+static int berlin2_div_enable(struct clk_hw *hw)
+{
+ struct berlin2_div *div = to_berlin2_div(hw);
+ struct berlin2_div_map *map = &div->map;
+ u32 reg;
+
+ if (div->lock)
+ spin_lock(div->lock);
+
+ reg = readl_relaxed(div->base + map->gate_offs);
+ reg |= BIT(map->gate_shift);
+ writel_relaxed(reg, div->base + map->gate_offs);
+
+ if (div->lock)
+ spin_unlock(div->lock);
+
+ return 0;
+}
+
+static void berlin2_div_disable(struct clk_hw *hw)
+{
+ struct berlin2_div *div = to_berlin2_div(hw);
+ struct berlin2_div_map *map = &div->map;
+ u32 reg;
+
+ if (div->lock)
+ spin_lock(div->lock);
+
+ reg = readl_relaxed(div->base + map->gate_offs);
+ reg &= ~BIT(map->gate_shift);
+ writel_relaxed(reg, div->base + map->gate_offs);
+
+ if (div->lock)
+ spin_unlock(div->lock);
+}
+
+static int berlin2_div_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct berlin2_div *div = to_berlin2_div(hw);
+ struct berlin2_div_map *map = &div->map;
+ u32 reg;
+
+ if (div->lock)
+ spin_lock(div->lock);
+
+ /* index == 0 is PLL_SWITCH */
+ reg = readl_relaxed(div->base + map->pll_switch_offs);
+ if (index == 0)
+ reg &= ~BIT(map->pll_switch_shift);
+ else
+ reg |= BIT(map->pll_switch_shift);
+ writel_relaxed(reg, div->base + map->pll_switch_offs);
+
+ /* index > 0 is PLL_SELECT */
+ if (index > 0) {
+ reg = readl_relaxed(div->base + map->pll_select_offs);
+ reg &= ~(PLL_SELECT_MASK << map->pll_select_shift);
+ reg |= (index - 1) << map->pll_select_shift;
+ writel_relaxed(reg, div->base + map->pll_select_offs);
+ }
+
+ if (div->lock)
+ spin_unlock(div->lock);
+
+ return 0;
+}
+
+static u8 berlin2_div_get_parent(struct clk_hw *hw)
+{
+ struct berlin2_div *div = to_berlin2_div(hw);
+ struct berlin2_div_map *map = &div->map;
+ u32 reg;
+ u8 index = 0;
+
+ if (div->lock)
+ spin_lock(div->lock);
+
+ /* PLL_SWITCH == 0 is index 0 */
+ reg = readl_relaxed(div->base + map->pll_switch_offs);
+ reg &= BIT(map->pll_switch_shift);
+ if (reg) {
+ reg = readl_relaxed(div->base + map->pll_select_offs);
+ reg >>= map->pll_select_shift;
+ reg &= PLL_SELECT_MASK;
+ index = 1 + reg;
+ }
+
+ if (div->lock)
+ spin_unlock(div->lock);
+
+ return index;
+}
+
+static unsigned long berlin2_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct berlin2_div *div = to_berlin2_div(hw);
+ struct berlin2_div_map *map = &div->map;
+ u32 divsw, div3sw, divider = 1;
+
+ if (div->lock)
+ spin_lock(div->lock);
+
+ divsw = readl_relaxed(div->base + map->div_switch_offs) &
+ (1 << map->div_switch_shift);
+ div3sw = readl_relaxed(div->base + map->div3_switch_offs) &
+ (1 << map->div3_switch_shift);
+
+ /* constant divide-by-3 (dominant) */
+ if (div3sw == 1) {
+ divider = 3;
+ /* divider can be bypassed with DIV_SWITCH == 0 */
+ } else if (divsw == 0) {
+ divider = 1;
+ /* clock divider determined by DIV_SELECT */
+ } else {
+ u32 reg;
+ reg = readl_relaxed(div->base + map->div_select_offs);
+ reg >>= map->div_select_shift;
+ reg &= DIV_SELECT_MASK;
+ divider = clk_div[reg];
+ }
+
+ if (div->lock)
+ spin_unlock(div->lock);
+
+ return parent_rate / divider;
+}
+
+static const struct clk_ops berlin2_div_rate_ops = {
+ .recalc_rate = berlin2_div_recalc_rate,
+};
+
+static const struct clk_ops berlin2_div_gate_ops = {
+ .is_enabled = berlin2_div_is_enabled,
+ .enable = berlin2_div_enable,
+ .disable = berlin2_div_disable,
+};
+
+static const struct clk_ops berlin2_div_mux_ops = {
+ .set_parent = berlin2_div_set_parent,
+ .get_parent = berlin2_div_get_parent,
+};
+
+struct clk * __init
+berlin2_div_register(const struct berlin2_div_map *map,
+ void __iomem *base, const char *name, u8 div_flags,
+ const char **parent_names, int num_parents,
+ unsigned long flags, spinlock_t *lock)
+{
+ const struct clk_ops *mux_ops = &berlin2_div_mux_ops;
+ const struct clk_ops *rate_ops = &berlin2_div_rate_ops;
+ const struct clk_ops *gate_ops = &berlin2_div_gate_ops;
+ struct berlin2_div *div;
+
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ /* copy div_map to allow __initconst */
+ memcpy(&div->map, map, sizeof(*map));
+ div->base = base;
+ div->lock = lock;
+
+ if ((div_flags & BERLIN2_DIV_HAS_GATE) == 0)
+ gate_ops = NULL;
+ if ((div_flags & BERLIN2_DIV_HAS_MUX) == 0)
+ mux_ops = NULL;
+
+ return clk_register_composite(NULL, name, parent_names, num_parents,
+ &div->hw, mux_ops, &div->hw, rate_ops,
+ &div->hw, gate_ops, flags);
+}
+
+static const struct berlin2_div_map berlin2_single_div_map __initconst = {
+ .gate_offs = 0,
+ .gate_shift = 0,
+ .pll_select_offs = 0,
+ .pll_select_shift = 1,
+ .pll_switch_offs = 0,
+ .pll_switch_shift = 4,
+ .div_switch_offs = 0,
+ .div_switch_shift = 5,
+ .div3_switch_offs = 0,
+ .div3_switch_shift = 6,
+ .div_select_offs = 0,
+ .div_select_shift = 7,
+};
+
+static void __init berlin2_div_of_setup(struct device_node *np)
+{
+ const char *parent_names[9] = {};
+ char *mux_name = "mux0";
+ int num_parents = 0;
+ void __iomem *base;
+ struct clk *iclk;
+ struct clk *div;
+ char *div_name;
+ int n;
+
+ iclk = of_clk_get_by_name(np, "mux_bypass");
+ if (IS_ERR(iclk)) {
+ pr_err("%s: Missing mux bypass clock\n", np->full_name);
+ return;
+ }
+ parent_names[0] = __clk_get_name(iclk);
+ clk_put(iclk);
+
+ /* collect mux input clock names */
+ for (n = 0; n < 8; n++) {
+ sprintf(mux_name, "mux%d", n);
+ iclk = of_clk_get_by_name(np, mux_name);
+ if (IS_ERR(iclk))
+ continue;
+ parent_names[1 + n] = __clk_get_name(iclk);
+ clk_put(iclk);
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("%s: Unable to map div register\n", np->full_name);
+ return;
+ }
+
+ div_name = of_clk_create_name(np);
+ div = berlin2_div_register(&berlin2_single_div_map, base, div_name,
+ BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+ parent_names, num_parents, 0, NULL);
+ if (!IS_ERR(div))
+ of_clk_add_provider(np, of_clk_src_simple_get, div);
+
+ kfree(div_name);
+}
+CLK_OF_DECLARE(berlin2_div, "marvell,berlin2-div", berlin2_div_of_setup);
new file mode 100644
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __BERLIN2_DIV_H
+#define __BERLIN2_DIV_H
+
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+
+#define BERLIN2_DIV_HAS_GATE BIT(0)
+#define BERLIN2_DIV_HAS_MUX BIT(1)
+
+#define BERLIN2_PLL_SELECT(_off, _sh) \
+ .pll_select_offs = _off, \
+ .pll_select_shift = _sh
+
+#define BERLIN2_PLL_SWITCH(_off, _sh) \
+ .pll_switch_offs = _off, \
+ .pll_switch_shift = _sh
+
+#define BERLIN2_DIV_SELECT(_off, _sh) \
+ .div_select_offs = _off, \
+ .div_select_shift = _sh
+
+#define BERLIN2_DIV_SWITCH(_off, _sh) \
+ .div_switch_offs = _off, \
+ .div_switch_shift = _sh
+
+#define BERLIN2_DIV_D3SWITCH(_off, _sh) \
+ .div3_switch_offs = _off, \
+ .div3_switch_shift = _sh
+
+#define BERLIN2_DIV_GATE(_off, _sh) \
+ .gate_offs = _off, \
+ .gate_shift = _sh
+
+struct berlin2_div_map {
+ u16 pll_select_offs;
+ u16 pll_switch_offs;
+ u16 div_select_offs;
+ u16 div_switch_offs;
+ u16 div3_switch_offs;
+ u16 gate_offs;
+ u8 pll_select_shift;
+ u8 pll_switch_shift;
+ u8 div_select_shift;
+ u8 div_switch_shift;
+ u8 div3_switch_shift;
+ u8 gate_shift;
+};
+
+struct berlin2_div_data {
+ const char *name;
+ unsigned long flags;
+ struct berlin2_div_map map;
+ u8 div_flags;
+};
+
+struct clk * __init
+berlin2_div_register(const struct berlin2_div_map *map,
+ void __iomem *base, const char *name, u8 div_flags,
+ const char **parent_names, int num_parents,
+ unsigned long flags, spinlock_t *lock);
+
+#endif /* BERLIN2_DIV_H */