| Message ID | 1397453895-6688-1-git-send-email-tushar.behera@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/14/2014 11:08 AM, Tushar Behera wrote: > Currently the threshold limits are updated in 2 stages, once for all > software trigger levels and again for hardware trip point. > > While updating the software trigger levels, it overwrites the threshold > limit for hardware trip point thereby forcing the Exynos core to issue > an emergency shutdown. > > Updating only the required fields in threshold register fixes this issue. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > --- > Based on v3.15-rc1. > > drivers/thermal/samsung/exynos_tmu.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index 0d96a51..ffccc89 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -225,6 +225,8 @@ skip_calib_data: > trigger_levs++; > } > > + rising_threshold = readl(data->base + reg->threshold_th0); > + > if (data->soc == SOC_ARCH_EXYNOS4210) { > /* Write temperature code for threshold */ > threshold_code = temp_to_code(data, pdata->threshold); > @@ -249,6 +251,7 @@ skip_calib_data: > ret = threshold_code; > goto out; > } > + rising_threshold &= ~(0xff << 8 * i); > rising_threshold |= threshold_code << 8 * i; > if (pdata->threshold_falling) { > threshold_code = temp_to_code(data, > @@ -281,6 +284,7 @@ skip_calib_data: > } > if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { > /* 1-4 level to be assigned in th0 reg */ > + rising_threshold &= ~(0xff << 8 * i); > rising_threshold |= threshold_code << 8 * i; > writel(rising_threshold, > data->base + reg->threshold_th0); > Adding Amit to get Samsung specific review.
On 4/14/14, Tushar Behera <tushar.behera@linaro.org> wrote: > Currently the threshold limits are updated in 2 stages, once for all > software trigger levels and again for hardware trip point. I guess the first stage is bootloader as could not find this in this file. Anyways the changes looks fine to me. Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > > While updating the software trigger levels, it overwrites the threshold > limit for hardware trip point thereby forcing the Exynos core to issue > an emergency shutdown. > > Updating only the required fields in threshold register fixes this issue. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > --- > Based on v3.15-rc1. > > drivers/thermal/samsung/exynos_tmu.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c > b/drivers/thermal/samsung/exynos_tmu.c > index 0d96a51..ffccc89 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -225,6 +225,8 @@ skip_calib_data: > trigger_levs++; > } > > + rising_threshold = readl(data->base + reg->threshold_th0); > + > if (data->soc == SOC_ARCH_EXYNOS4210) { > /* Write temperature code for threshold */ > threshold_code = temp_to_code(data, pdata->threshold); > @@ -249,6 +251,7 @@ skip_calib_data: > ret = threshold_code; > goto out; > } > + rising_threshold &= ~(0xff << 8 * i); > rising_threshold |= threshold_code << 8 * i; > if (pdata->threshold_falling) { > threshold_code = temp_to_code(data, > @@ -281,6 +284,7 @@ skip_calib_data: > } > if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { > /* 1-4 level to be assigned in th0 reg */ > + rising_threshold &= ~(0xff << 8 * i); > rising_threshold |= threshold_code << 8 * i; > writel(rising_threshold, > data->base + reg->threshold_th0); > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Monday, April 14, 2014 11:08:15 AM Tushar Behera wrote: > Currently the threshold limits are updated in 2 stages, once for all > software trigger levels and again for hardware trip point. > > While updating the software trigger levels, it overwrites the threshold > limit for hardware trip point thereby forcing the Exynos core to issue > an emergency shutdown. On what SoC type have you encountered this problem? It doesn't seem to happen on older SoCs (at least Exynos4210 and Exynos4x12 ones). > Updating only the required fields in threshold register fixes this issue. With the current code there is indeed a time window during which threshold limit for hardware trip point is set to zero so the fix is correct. > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > --- > Based on v3.15-rc1. > > drivers/thermal/samsung/exynos_tmu.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index 0d96a51..ffccc89 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -225,6 +225,8 @@ skip_calib_data: > trigger_levs++; > } > > + rising_threshold = readl(data->base + reg->threshold_th0); You may move this inside "} else {" block as rising_threshold is not used for data->soc == SOC_ARCH_EXYNOS4210 case. Also rising_threshold initialization to zero at the beginning of exynos_tmu_initialize() is not needed anylonger. > + > if (data->soc == SOC_ARCH_EXYNOS4210) { > /* Write temperature code for threshold */ > threshold_code = temp_to_code(data, pdata->threshold); > @@ -249,6 +251,7 @@ skip_calib_data: > ret = threshold_code; > goto out; > } > + rising_threshold &= ~(0xff << 8 * i); > rising_threshold |= threshold_code << 8 * i; > if (pdata->threshold_falling) { > threshold_code = temp_to_code(data, > @@ -281,6 +284,7 @@ skip_calib_data: > } > if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { > /* 1-4 level to be assigned in th0 reg */ > + rising_threshold &= ~(0xff << 8 * i); > rising_threshold |= threshold_code << 8 * i; > writel(rising_threshold, > data->base + reg->threshold_th0); Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/24/2014 04:18 PM, Bartlomiej Zolnierkiewicz wrote: > > Hi, > > On Monday, April 14, 2014 11:08:15 AM Tushar Behera wrote: >> Currently the threshold limits are updated in 2 stages, once for all >> software trigger levels and again for hardware trip point. >> >> While updating the software trigger levels, it overwrites the threshold >> limit for hardware trip point thereby forcing the Exynos core to issue >> an emergency shutdown. > > On what SoC type have you encountered this problem? It doesn't seem to > happen on older SoCs (at least Exynos4210 and Exynos4x12 ones). > I found this issue while testing on Exynos5420 with these patches [1]. [1] https://lkml.org/lkml/2013/8/1/38 >> Updating only the required fields in threshold register fixes this issue. > > With the current code there is indeed a time window during which threshold > limit for hardware trip point is set to zero so the fix is correct. >
On 04/24/2014 11:48 AM, Amit Kachhap wrote: > On 4/14/14, Tushar Behera <tushar.behera@linaro.org> wrote: >> Currently the threshold limits are updated in 2 stages, once for all >> software trigger levels and again for hardware trip point. > I guess the first stage is bootloader as could not find this in this file. > Anyways the changes looks fine to me. > > Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > Can this the patch be merged now? >> >> While updating the software trigger levels, it overwrites the threshold >> limit for hardware trip point thereby forcing the Exynos core to issue >> an emergency shutdown. >> >> Updating only the required fields in threshold register fixes this issue. >> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >> --- >> Based on v3.15-rc1. >> >> drivers/thermal/samsung/exynos_tmu.c | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/drivers/thermal/samsung/exynos_tmu.c >> b/drivers/thermal/samsung/exynos_tmu.c >> index 0d96a51..ffccc89 100644 >> --- a/drivers/thermal/samsung/exynos_tmu.c >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> @@ -225,6 +225,8 @@ skip_calib_data: >> trigger_levs++; >> } >> >> + rising_threshold = readl(data->base + reg->threshold_th0); >> + >> if (data->soc == SOC_ARCH_EXYNOS4210) { >> /* Write temperature code for threshold */ >> threshold_code = temp_to_code(data, pdata->threshold); >> @@ -249,6 +251,7 @@ skip_calib_data: >> ret = threshold_code; >> goto out; >> } >> + rising_threshold &= ~(0xff << 8 * i); >> rising_threshold |= threshold_code << 8 * i; >> if (pdata->threshold_falling) { >> threshold_code = temp_to_code(data, >> @@ -281,6 +284,7 @@ skip_calib_data: >> } >> if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { >> /* 1-4 level to be assigned in th0 reg */ >> + rising_threshold &= ~(0xff << 8 * i); >> rising_threshold |= threshold_code << 8 * i; >> writel(rising_threshold, >> data->base + reg->threshold_th0); >> -- >> 1.7.9.5 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" >> in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >>
On ?, 2014-04-24 at 11:48 +0530, Amit Kachhap wrote: > On 4/14/14, Tushar Behera <tushar.behera@linaro.org> wrote: > > Currently the threshold limits are updated in 2 stages, once for all > > software trigger levels and again for hardware trip point. > I guess the first stage is bootloader as could not find this in this file. > Anyways the changes looks fine to me. > > Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> applied. thanks, rui > > > > > While updating the software trigger levels, it overwrites the threshold > > limit for hardware trip point thereby forcing the Exynos core to issue > > an emergency shutdown. > > > > Updating only the required fields in threshold register fixes this issue. > > > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > > --- > > Based on v3.15-rc1. > > > > drivers/thermal/samsung/exynos_tmu.c | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/thermal/samsung/exynos_tmu.c > > b/drivers/thermal/samsung/exynos_tmu.c > > index 0d96a51..ffccc89 100644 > > --- a/drivers/thermal/samsung/exynos_tmu.c > > +++ b/drivers/thermal/samsung/exynos_tmu.c > > @@ -225,6 +225,8 @@ skip_calib_data: > > trigger_levs++; > > } > > > > + rising_threshold = readl(data->base + reg->threshold_th0); > > + > > if (data->soc == SOC_ARCH_EXYNOS4210) { > > /* Write temperature code for threshold */ > > threshold_code = temp_to_code(data, pdata->threshold); > > @@ -249,6 +251,7 @@ skip_calib_data: > > ret = threshold_code; > > goto out; > > } > > + rising_threshold &= ~(0xff << 8 * i); > > rising_threshold |= threshold_code << 8 * i; > > if (pdata->threshold_falling) { > > threshold_code = temp_to_code(data, > > @@ -281,6 +284,7 @@ skip_calib_data: > > } > > if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { > > /* 1-4 level to be assigned in th0 reg */ > > + rising_threshold &= ~(0xff << 8 * i); > > rising_threshold |= threshold_code << 8 * i; > > writel(rising_threshold, > > data->base + reg->threshold_th0); > > -- > > 1.7.9.5 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > > in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 0d96a51..ffccc89 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -225,6 +225,8 @@ skip_calib_data: trigger_levs++; } + rising_threshold = readl(data->base + reg->threshold_th0); + if (data->soc == SOC_ARCH_EXYNOS4210) { /* Write temperature code for threshold */ threshold_code = temp_to_code(data, pdata->threshold); @@ -249,6 +251,7 @@ skip_calib_data: ret = threshold_code; goto out; } + rising_threshold &= ~(0xff << 8 * i); rising_threshold |= threshold_code << 8 * i; if (pdata->threshold_falling) { threshold_code = temp_to_code(data, @@ -281,6 +284,7 @@ skip_calib_data: } if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { /* 1-4 level to be assigned in th0 reg */ + rising_threshold &= ~(0xff << 8 * i); rising_threshold |= threshold_code << 8 * i; writel(rising_threshold, data->base + reg->threshold_th0);
Currently the threshold limits are updated in 2 stages, once for all software trigger levels and again for hardware trip point. While updating the software trigger levels, it overwrites the threshold limit for hardware trip point thereby forcing the Exynos core to issue an emergency shutdown. Updating only the required fields in threshold register fixes this issue. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> --- Based on v3.15-rc1. drivers/thermal/samsung/exynos_tmu.c | 4 ++++ 1 file changed, 4 insertions(+)