| Message ID | 1399064852-19569-1-git-send-email-soren.brinkmann@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
ping? Any comments? Thanks, Sören On Fri, 2014-05-02 at 02:07PM -0700, Soren Brinkmann wrote: > To silence the warning > cpufreq_cpu0: failed to get cpu0 regulator: -19 > from the cpufreq driver regarding a missing regulator, > add a fixed regulator to the DT. > Zynq does not support voltage scaling and the CPU rail should always be > supplied with 1 V, hence it is added in the SOC-level dtsi. > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> > --- > > arch/arm/boot/dts/zynq-7000.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi > index c1176abc34d9..64779f9d5c38 100644 > --- a/arch/arm/boot/dts/zynq-7000.dtsi > +++ b/arch/arm/boot/dts/zynq-7000.dtsi > @@ -25,6 +25,7 @@ > reg = <0>; > clocks = <&clkc 3>; > clock-latency = <1000>; > + cpu0-supply = <®ulator_vccpint>; > operating-points = < > /* kHz uV */ > 666667 1000000 > @@ -48,6 +49,15 @@ > reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; > }; > > + regulator_vccpint: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "VCCPINT"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > amba { > compatible = "simple-bus"; > #address-cells = <1>; > -- > 1.9.2.1.g06c4abd > >
On 05/15/2014 04:57 PM, Sören Brinkmann wrote: > ping? Any comments? > > Thanks, > Sören > > On Fri, 2014-05-02 at 02:07PM -0700, Soren Brinkmann wrote: >> To silence the warning >> cpufreq_cpu0: failed to get cpu0 regulator: -19 >> from the cpufreq driver regarding a missing regulator, >> add a fixed regulator to the DT. >> Zynq does not support voltage scaling and the CPU rail should always be >> supplied with 1 V, hence it is added in the SOC-level dtsi. >> >> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> >> --- >> >> arch/arm/boot/dts/zynq-7000.dtsi | 10 ++++++++++ >> 1 file changed, 10 insertions(+) Probably no objection from others. Applied to zynq/dt branch. Thanks, Michal
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index c1176abc34d9..64779f9d5c38 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -25,6 +25,7 @@ reg = <0>; clocks = <&clkc 3>; clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 @@ -48,6 +49,15 @@ reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; }; + regulator_vccpint: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + amba { compatible = "simple-bus"; #address-cells = <1>;
To silence the warning cpufreq_cpu0: failed to get cpu0 regulator: -19 from the cpufreq driver regarding a missing regulator, add a fixed regulator to the DT. Zynq does not support voltage scaling and the CPU rail should always be supplied with 1 V, hence it is added in the SOC-level dtsi. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> --- arch/arm/boot/dts/zynq-7000.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)