Message ID | 1400506776-2816-5-git-send-email-george.cherian@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi, On Mon, May 19, 2014 at 8:39 AM, George Cherian <george.cherian@ti.com> wrote: > Currently musb_platform_reset() is only used by dsps. > In case of BABBLE interrupt for other platforms the musb_platform_reset() > is a NOP. In such situations no need to re-initialize the endpoints. > Also in the latest silicon revision of AM335x, we do have a babble recovery > mechanism without resetting the IP block. In preperation to add that support > its better to have a rest_done return for musb_platform_reset(). > > Signed-off-by: George Cherian <george.cherian@ti.com> > --- > drivers/usb/musb/musb_core.c | 38 +++++++++++++++++++++----------------- > drivers/usb/musb/musb_core.h | 10 ++++++---- > drivers/usb/musb/musb_dsps.c | 3 ++- > 3 files changed, 29 insertions(+), 22 deletions(-) > > diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c > index 8920b80..1b0b85d 100644 > --- a/drivers/usb/musb/musb_core.c > +++ b/drivers/usb/musb/musb_core.c > @@ -1755,28 +1755,32 @@ static void musb_irq_work(struct work_struct *data) > static void musb_recover_work(struct work_struct *data) > { > struct musb *musb = container_of(data, struct musb, recover_work.work); > - int status; > + int status, ret; > > - musb_platform_reset(musb); > + ret = musb_platform_reset(musb); > + if (ret < 0) If change it to ' if (ret)' here, you don't have to indent the reset of the code. Regards, -Bin. > + return; > > - usb_phy_vbus_off(musb->xceiv); > - usleep_range(100, 200); > + if (!ret) { > + usb_phy_vbus_off(musb->xceiv); > + usleep_range(100, 200); > > - usb_phy_vbus_on(musb->xceiv); > - usleep_range(100, 200); > + usb_phy_vbus_on(musb->xceiv); > + usleep_range(100, 200); > > - /* > - * When a babble condition occurs, the musb controller removes the > - * session bit and the endpoint config is lost. > - */ > - if (musb->dyn_fifo) > - status = ep_config_from_table(musb); > - else > - status = ep_config_from_hw(musb); > + /* > + * When a babble condition occurs, the musb controller > + * removes the session bit and the endpoint config is lost. > + */ > + if (musb->dyn_fifo) > + status = ep_config_from_table(musb); > + else > + status = ep_config_from_hw(musb); > > - /* start the session again */ > - if (status == 0) > - musb_start(musb); > + /* start the session again */ > + if (status == 0) > + musb_start(musb); > + } > } > > /* -------------------------------------------------------------------------- > diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h > index 423cd00..3ccb428 100644 > --- a/drivers/usb/musb/musb_core.h > +++ b/drivers/usb/musb/musb_core.h > @@ -192,7 +192,7 @@ struct musb_platform_ops { > > int (*set_mode)(struct musb *musb, u8 mode); > void (*try_idle)(struct musb *musb, unsigned long timeout); > - void (*reset)(struct musb *musb); > + int (*reset)(struct musb *musb); > > int (*vbus_status)(struct musb *musb); > void (*set_vbus)(struct musb *musb, int on); > @@ -554,10 +554,12 @@ static inline void musb_platform_try_idle(struct musb *musb, > musb->ops->try_idle(musb, timeout); > } > > -static inline void musb_platform_reset(struct musb *musb) > +static inline int musb_platform_reset(struct musb *musb) > { > - if (musb->ops->reset) > - musb->ops->reset(musb); > + if (!musb->ops->reset) > + return -EINVAL; > + > + return musb->ops->reset(musb); > } > > static inline int musb_platform_get_vbus_status(struct musb *musb) > diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c > index 74c4193..f6f3087 100644 > --- a/drivers/usb/musb/musb_dsps.c > +++ b/drivers/usb/musb/musb_dsps.c > @@ -536,7 +536,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode) > return 0; > } > > -static void dsps_musb_reset(struct musb *musb) > +static int dsps_musb_reset(struct musb *musb) > { > struct device *dev = musb->controller; > struct dsps_glue *glue = dev_get_drvdata(dev->parent); > @@ -548,6 +548,7 @@ static void dsps_musb_reset(struct musb *musb) > usleep_range(100, 200); > usb_phy_init(musb->xceiv); > > + return 0; > } > > static struct musb_platform_ops dsps_ops = { > -- > 1.8.3.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 8920b80..1b0b85d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1755,28 +1755,32 @@ static void musb_irq_work(struct work_struct *data) static void musb_recover_work(struct work_struct *data) { struct musb *musb = container_of(data, struct musb, recover_work.work); - int status; + int status, ret; - musb_platform_reset(musb); + ret = musb_platform_reset(musb); + if (ret < 0) + return; - usb_phy_vbus_off(musb->xceiv); - usleep_range(100, 200); + if (!ret) { + usb_phy_vbus_off(musb->xceiv); + usleep_range(100, 200); - usb_phy_vbus_on(musb->xceiv); - usleep_range(100, 200); + usb_phy_vbus_on(musb->xceiv); + usleep_range(100, 200); - /* - * When a babble condition occurs, the musb controller removes the - * session bit and the endpoint config is lost. - */ - if (musb->dyn_fifo) - status = ep_config_from_table(musb); - else - status = ep_config_from_hw(musb); + /* + * When a babble condition occurs, the musb controller + * removes the session bit and the endpoint config is lost. + */ + if (musb->dyn_fifo) + status = ep_config_from_table(musb); + else + status = ep_config_from_hw(musb); - /* start the session again */ - if (status == 0) - musb_start(musb); + /* start the session again */ + if (status == 0) + musb_start(musb); + } } /* -------------------------------------------------------------------------- diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 423cd00..3ccb428 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -192,7 +192,7 @@ struct musb_platform_ops { int (*set_mode)(struct musb *musb, u8 mode); void (*try_idle)(struct musb *musb, unsigned long timeout); - void (*reset)(struct musb *musb); + int (*reset)(struct musb *musb); int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); @@ -554,10 +554,12 @@ static inline void musb_platform_try_idle(struct musb *musb, musb->ops->try_idle(musb, timeout); } -static inline void musb_platform_reset(struct musb *musb) +static inline int musb_platform_reset(struct musb *musb) { - if (musb->ops->reset) - musb->ops->reset(musb); + if (!musb->ops->reset) + return -EINVAL; + + return musb->ops->reset(musb); } static inline int musb_platform_get_vbus_status(struct musb *musb) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 74c4193..f6f3087 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -536,7 +536,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode) return 0; } -static void dsps_musb_reset(struct musb *musb) +static int dsps_musb_reset(struct musb *musb) { struct device *dev = musb->controller; struct dsps_glue *glue = dev_get_drvdata(dev->parent); @@ -548,6 +548,7 @@ static void dsps_musb_reset(struct musb *musb) usleep_range(100, 200); usb_phy_init(musb->xceiv); + return 0; } static struct musb_platform_ops dsps_ops = {
Currently musb_platform_reset() is only used by dsps. In case of BABBLE interrupt for other platforms the musb_platform_reset() is a NOP. In such situations no need to re-initialize the endpoints. Also in the latest silicon revision of AM335x, we do have a babble recovery mechanism without resetting the IP block. In preperation to add that support its better to have a rest_done return for musb_platform_reset(). Signed-off-by: George Cherian <george.cherian@ti.com> --- drivers/usb/musb/musb_core.c | 38 +++++++++++++++++++++----------------- drivers/usb/musb/musb_core.h | 10 ++++++---- drivers/usb/musb/musb_dsps.c | 3 ++- 3 files changed, 29 insertions(+), 22 deletions(-)