| Message ID | 1400060197-706-1-git-send-email-jiada_wang@mentor.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Jiada, On Wed, May 14, 2014 at 6:36 AM, Jiada Wang <jiada_wang@mentor.com> wrote: > According to i.MX6 user manual, "Before changing the PLL setting, > power it down. Power up the PLL after the change" > But currently PLL setting is being updated without power-down > it first. This may end up with improper output/gitches which > prevents furture operation. > > Signed-off-by: Jiada Wang <jiada_wang@mentor.com> > --- > arch/arm/mach-imx/clk-pllv3.c | 72 +++++++++++++++++++++++++++++++++++++++---- > 1 file changed, 66 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c > index 6136405..f77edd6 100644 > --- a/arch/arm/mach-imx/clk-pllv3.c > +++ b/arch/arm/mach-imx/clk-pllv3.c > @@ -67,6 +67,42 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) > return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT; > } > > +static void clk_pllv3_powerdown(struct clk_pllv3 *pll) > +{ > + u32 val; > + > + val = readl_relaxed(pll->base); > + val |= BM_PLL_BYPASS; > + writel_relaxed(val, pll->base); > + > + if (pll->powerup_set) > + val &= ~BM_PLL_POWER; > + else > + val |= BM_PLL_POWER; > + writel_relaxed(val, pll->base); > +} > + > +static int clk_pllv3_powerrestore(struct clk_pllv3 *pll, u32 power, u32 bypass) > +{ > + u32 val; > + int ret; > + > + val = readl_relaxed(pll->base); > + val &= ~BM_PLL_POWER; Shouldn't this be: if (pll->powerup_set) val |= BM_PLL_POWER; else val &= ~BM_PLL_POWER;
Hi Fabio, On 19.05.2014 19:31, Fabio Estevam wrote: > Hi Jiada, > > On Wed, May 14, 2014 at 6:36 AM, Jiada Wang <jiada_wang@mentor.com> wrote: >> According to i.MX6 user manual, "Before changing the PLL setting, >> power it down. Power up the PLL after the change" >> But currently PLL setting is being updated without power-down >> it first. This may end up with improper output/gitches which >> prevents furture operation. >> >> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> >> --- >> arch/arm/mach-imx/clk-pllv3.c | 72 +++++++++++++++++++++++++++++++++++++++---- >> 1 file changed, 66 insertions(+), 6 deletions(-) >> >> diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c >> index 6136405..f77edd6 100644 >> --- a/arch/arm/mach-imx/clk-pllv3.c >> +++ b/arch/arm/mach-imx/clk-pllv3.c >> @@ -67,6 +67,42 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) >> return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT; >> } >> >> +static void clk_pllv3_powerdown(struct clk_pllv3 *pll) >> +{ >> + u32 val; >> + >> + val = readl_relaxed(pll->base); >> + val |= BM_PLL_BYPASS; >> + writel_relaxed(val, pll->base); >> + >> + if (pll->powerup_set) >> + val &= ~BM_PLL_POWER; >> + else >> + val |= BM_PLL_POWER; >> + writel_relaxed(val, pll->base); >> +} >> + >> +static int clk_pllv3_powerrestore(struct clk_pllv3 *pll, u32 power, u32 bypass) >> +{ >> + u32 val; >> + int ret; >> + >> + val = readl_relaxed(pll->base); >> + val &= ~BM_PLL_POWER; > > Shouldn't this be: > if (pll->powerup_set) > val |= BM_PLL_POWER; > else > val &= ~BM_PLL_POWER; > Jiada will correct me if I'm wrong, but to my understanding the job of this function is to *restore* the previously configured power state (not to set any particular one). The previously configured power state is passed in 'u32 power'. So we just mask out the POWER bit here to be able to restore the old power state, independent if it is 0 or 1. So I would think + val = readl_relaxed(pll->base); + val &= ~BM_PLL_POWER; + val |= power; + writel_relaxed(val, pll->base); is correct here. Best regards Dirk
Hi Dirk and Fabio On 05/19/2014 11:17 PM, Dirk Behme wrote: > Hi Fabio, > > On 19.05.2014 19:31, Fabio Estevam wrote: >> Hi Jiada, >> >> On Wed, May 14, 2014 at 6:36 AM, Jiada Wang <jiada_wang@mentor.com> >> wrote: >>> According to i.MX6 user manual, "Before changing the PLL setting, >>> power it down. Power up the PLL after the change" >>> But currently PLL setting is being updated without power-down >>> it first. This may end up with improper output/gitches which >>> prevents furture operation. >>> >>> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> >>> --- >>> arch/arm/mach-imx/clk-pllv3.c | 72 >>> +++++++++++++++++++++++++++++++++++++++---- >>> 1 file changed, 66 insertions(+), 6 deletions(-) >>> >>> diff --git a/arch/arm/mach-imx/clk-pllv3.c >>> b/arch/arm/mach-imx/clk-pllv3.c >>> index 6136405..f77edd6 100644 >>> --- a/arch/arm/mach-imx/clk-pllv3.c >>> +++ b/arch/arm/mach-imx/clk-pllv3.c >>> @@ -67,6 +67,42 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) >>> return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT; >>> } >>> >>> +static void clk_pllv3_powerdown(struct clk_pllv3 *pll) >>> +{ >>> + u32 val; >>> + >>> + val = readl_relaxed(pll->base); >>> + val |= BM_PLL_BYPASS; >>> + writel_relaxed(val, pll->base); >>> + >>> + if (pll->powerup_set) >>> + val &= ~BM_PLL_POWER; >>> + else >>> + val |= BM_PLL_POWER; >>> + writel_relaxed(val, pll->base); >>> +} >>> + >>> +static int clk_pllv3_powerrestore(struct clk_pllv3 *pll, u32 power, >>> u32 bypass) >>> +{ >>> + u32 val; >>> + int ret; >>> + >>> + val = readl_relaxed(pll->base); >>> + val &= ~BM_PLL_POWER; >> >> Shouldn't this be: >> if (pll->powerup_set) >> val |= BM_PLL_POWER; >> else >> val &= ~BM_PLL_POWER; >> > > Jiada will correct me if I'm wrong, but to my understanding the job of > this function is to *restore* the previously configured power state (not > to set any particular one). > > The previously configured power state is passed in 'u32 power'. So we > just mask out the POWER bit here to be able to restore the old power > state, independent if it is 0 or 1. So I would think > > + val = readl_relaxed(pll->base); > + val &= ~BM_PLL_POWER; > + val |= power; > + writel_relaxed(val, pll->base); > > is correct here. > > Best regards > > Dirk > Yes, this function restores power state as well as bypass state, as set_rate() may be called before prepare(), so we have no idea about power and bypass state here. Thanks, Jiada
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c index 6136405..f77edd6 100644 --- a/arch/arm/mach-imx/clk-pllv3.c +++ b/arch/arm/mach-imx/clk-pllv3.c @@ -67,6 +67,42 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT; } +static void clk_pllv3_powerdown(struct clk_pllv3 *pll) +{ + u32 val; + + val = readl_relaxed(pll->base); + val |= BM_PLL_BYPASS; + writel_relaxed(val, pll->base); + + if (pll->powerup_set) + val &= ~BM_PLL_POWER; + else + val |= BM_PLL_POWER; + writel_relaxed(val, pll->base); +} + +static int clk_pllv3_powerrestore(struct clk_pllv3 *pll, u32 power, u32 bypass) +{ + u32 val; + int ret; + + val = readl_relaxed(pll->base); + val &= ~BM_PLL_POWER; + val |= power; + writel_relaxed(val, pll->base); + + ret = clk_pllv3_wait_lock(pll); + if (ret == 0) { + /* only if it locked can we switch back to the PLL */ + val &= ~BM_PLL_BYPASS; + val |= bypass; + writel_relaxed(val, pll->base); + } + + return ret; +} + static int clk_pllv3_prepare(struct clk_hw *hw) { struct clk_pllv3 *pll = to_clk_pllv3(hw); @@ -149,7 +185,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val, div; + u32 val, powerval, bypassval, div; if (rate == parent_rate * 22) div = 1; @@ -159,11 +195,19 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; val = readl_relaxed(pll->base); + powerval = val & BM_PLL_POWER; + bypassval = val & BM_PLL_BYPASS; + + /* power down PLL first */ + clk_pllv3_powerdown(pll); + + val = readl_relaxed(pll->base); val &= ~pll->div_mask; val |= div; writel_relaxed(val, pll->base); - return clk_pllv3_wait_lock(pll); + /* restore power & bypass bit */ + return clk_pllv3_powerrestore(pll, powerval, bypassval); } static const struct clk_ops clk_pllv3_ops = { @@ -208,18 +252,26 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate, struct clk_pllv3 *pll = to_clk_pllv3(hw); unsigned long min_rate = parent_rate * 54 / 2; unsigned long max_rate = parent_rate * 108 / 2; - u32 val, div; + u32 val, powerval, bypassval, div; if (rate < min_rate || rate > max_rate) return -EINVAL; + val = readl_relaxed(pll->base); + powerval = val & BM_PLL_POWER; + bypassval = val & BM_PLL_BYPASS; + + /* power down PLL first */ + clk_pllv3_powerdown(pll); + div = rate * 2 / parent_rate; val = readl_relaxed(pll->base); val &= ~pll->div_mask; val |= div; writel_relaxed(val, pll->base); - return clk_pllv3_wait_lock(pll); + /* restore power & bypass bit */ + return clk_pllv3_powerrestore(pll, powerval, bypassval); } static const struct clk_ops clk_pllv3_sys_ops = { @@ -273,13 +325,20 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, struct clk_pllv3 *pll = to_clk_pllv3(hw); unsigned long min_rate = parent_rate * 27; unsigned long max_rate = parent_rate * 54; - u32 val, div; + u32 val, powerval, bypassval, div; u32 mfn, mfd = 1000000; s64 temp64; if (rate < min_rate || rate > max_rate) return -EINVAL; + val = readl_relaxed(pll->base); + powerval = val & BM_PLL_POWER; + bypassval = val & BM_PLL_BYPASS; + + /* power down PLL first */ + clk_pllv3_powerdown(pll); + div = rate / parent_rate; temp64 = (u64) (rate - div * parent_rate); temp64 *= mfd; @@ -293,7 +352,8 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET); writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET); - return clk_pllv3_wait_lock(pll); + /* restore power & bypass bit */ + return clk_pllv3_powerrestore(pll, powerval, bypassval); } static const struct clk_ops clk_pllv3_av_ops = {
According to i.MX6 user manual, "Before changing the PLL setting, power it down. Power up the PLL after the change" But currently PLL setting is being updated without power-down it first. This may end up with improper output/gitches which prevents furture operation. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> --- arch/arm/mach-imx/clk-pllv3.c | 72 +++++++++++++++++++++++++++++++++++++++---- 1 file changed, 66 insertions(+), 6 deletions(-)