| Message ID | 1400562365-7566-1-git-send-email-rahul.sharma@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi Inki, Tomasz, Any comment on this patch? Regards, Rahul Sharma On 20 May 2014 10:36, Rahul Sharma <rahul.sharma@samsung.com> wrote: > Exynos drm hdmi driver used to get dummy hdmiphy clock to > control the PMU bit for hdmiphy. This bit needs to be set > before setting any resolution to hdmi hardware. This was > handled using dummy hdmiphy clock which is removed here. > > PMU is already defined as system controller for exynos > SoCs. Hdmi driver is modified to control the phy enable bit > inside PMU using regmap interfaces. > > Devicetree binding document for hdmi is also updated. > > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > --- > V2: > 1) Squashed hdmiphy clock cleanup patch. > 2) Addressed comments related to indentation, using > BIT macro while definnig bits and using IS_ERR check > while verifying regmap handle. > > This patch is based on exynos-drm-next branch. > > .../devicetree/bindings/video/exynos_hdmi.txt | 2 ++ > drivers/gpu/drm/exynos/exynos_hdmi.c | 27 ++++++++++++++------ > drivers/gpu/drm/exynos/regs-hdmi.h | 4 +++ > 3 files changed, 25 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt > index 75ada04..1fd8cf9 100644 > --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt > +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt > @@ -28,6 +28,7 @@ Required properties: > "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". > - ddc: phandle to the hdmi ddc node > - phy: phandle to the hdmi phy node > +- samsung,syscon-phandle: phandle for system controller node for PMU. > > Example: > > @@ -38,4 +39,5 @@ Example: > hpd-gpio = <&gpx3 7 1>; > ddc = <&hdmi_ddc_node>; > phy = <&hdmi_phy_node>; > + samsung,syscon-phandle = <&pmu_system_controller>; > }; > diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c > index b03e721..f5e188f 100644 > --- a/drivers/gpu/drm/exynos/exynos_hdmi.c > +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c > @@ -38,6 +38,8 @@ > #include <linux/of_gpio.h> > #include <linux/hdmi.h> > #include <linux/component.h> > +#include <linux/mfd/syscon.h> > +#include <linux/regmap.h> > > #include <drm/exynos_drm.h> > > @@ -81,7 +83,6 @@ struct hdmi_resources { > struct clk *sclk_hdmi; > struct clk *sclk_pixel; > struct clk *sclk_hdmiphy; > - struct clk *hdmiphy; > struct clk *mout_hdmi; > struct regulator_bulk_data *regul_bulk; > int regul_count; > @@ -208,6 +209,7 @@ struct hdmi_context { > const struct hdmiphy_config *phy_confs; > unsigned int phy_conf_count; > > + struct regmap *pmureg; > enum hdmi_type type; > }; > > @@ -2013,7 +2015,10 @@ static void hdmi_poweron(struct exynos_drm_display *display) > if (regulator_bulk_enable(res->regul_count, res->regul_bulk)) > DRM_DEBUG_KMS("failed to enable regulator bulk\n"); > > - clk_prepare_enable(res->hdmiphy); > + /* set pmu hdmiphy control bit to enable hdmiphy */ > + regmap_update_bits(hdata->pmureg, PMU_HDMI_PHY_CONTROL, > + PMU_HDMI_PHY_ENABLE_BIT, 1); > + > clk_prepare_enable(res->hdmi); > clk_prepare_enable(res->sclk_hdmi); > > @@ -2040,7 +2045,11 @@ static void hdmi_poweroff(struct exynos_drm_display *display) > > clk_disable_unprepare(res->sclk_hdmi); > clk_disable_unprepare(res->hdmi); > - clk_disable_unprepare(res->hdmiphy); > + > + /* reset pmu hdmiphy control bit to disable hdmiphy */ > + regmap_update_bits(hdata->pmureg, PMU_HDMI_PHY_CONTROL, > + PMU_HDMI_PHY_ENABLE_BIT, 0); > + > regulator_bulk_disable(res->regul_count, res->regul_bulk); > > pm_runtime_put_sync(hdata->dev); > @@ -2143,11 +2152,6 @@ static int hdmi_resources_init(struct hdmi_context *hdata) > DRM_ERROR("failed to get clock 'sclk_hdmiphy'\n"); > goto fail; > } > - res->hdmiphy = devm_clk_get(dev, "hdmiphy"); > - if (IS_ERR(res->hdmiphy)) { > - DRM_ERROR("failed to get clock 'hdmiphy'\n"); > - goto fail; > - } > res->mout_hdmi = devm_clk_get(dev, "mout_hdmi"); > if (IS_ERR(res->mout_hdmi)) { > DRM_ERROR("failed to get clock 'mout_hdmi'\n"); > @@ -2353,6 +2357,13 @@ static int hdmi_probe(struct platform_device *pdev) > goto err_hdmiphy; > } > > + hdata->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, > + "samsung,syscon-phandle"); > + if (IS_ERR(hdata->pmureg)) { > + DRM_ERROR("syscon regmap lookup failed.\n"); > + goto err_hdmiphy; > + } > + > pm_runtime_enable(dev); > hdmi_display.ctx = hdata; > > diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h > index 84a69cd..6d846b9 100644 > --- a/drivers/gpu/drm/exynos/regs-hdmi.h > +++ b/drivers/gpu/drm/exynos/regs-hdmi.h > @@ -585,4 +585,8 @@ > #define HDMI_PHY_DISABLE_MODE_SET 0x80 > #define HDMI_PHY_ENABLE_MODE_SET 0x00 > > +/* PMU Registers for PHY */ > +#define PMU_HDMI_PHY_CONTROL 0x700 > +#define PMU_HDMI_PHY_ENABLE_BIT BIT(0) > + > #endif /* SAMSUNG_REGS_HDMI_H */ > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2014? 05? 21? 18:51, Rahul Sharma wrote: > Hi Inki, Tomasz, > > Any comment on this patch? > Merged. Thanks, Inki Dae > Regards, > Rahul Sharma > > On 20 May 2014 10:36, Rahul Sharma <rahul.sharma@samsung.com> wrote: >> Exynos drm hdmi driver used to get dummy hdmiphy clock to >> control the PMU bit for hdmiphy. This bit needs to be set >> before setting any resolution to hdmi hardware. This was >> handled using dummy hdmiphy clock which is removed here. >> >> PMU is already defined as system controller for exynos >> SoCs. Hdmi driver is modified to control the phy enable bit >> inside PMU using regmap interfaces. >> >> Devicetree binding document for hdmi is also updated. >> >> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> >> --- >> V2: >> 1) Squashed hdmiphy clock cleanup patch. >> 2) Addressed comments related to indentation, using >> BIT macro while definnig bits and using IS_ERR check >> while verifying regmap handle. >> >> This patch is based on exynos-drm-next branch. >> >> .../devicetree/bindings/video/exynos_hdmi.txt | 2 ++ >> drivers/gpu/drm/exynos/exynos_hdmi.c | 27 ++++++++++++++------ >> drivers/gpu/drm/exynos/regs-hdmi.h | 4 +++ >> 3 files changed, 25 insertions(+), 8 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt >> index 75ada04..1fd8cf9 100644 >> --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt >> +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt >> @@ -28,6 +28,7 @@ Required properties: >> "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". >> - ddc: phandle to the hdmi ddc node >> - phy: phandle to the hdmi phy node >> +- samsung,syscon-phandle: phandle for system controller node for PMU. >> >> Example: >> >> @@ -38,4 +39,5 @@ Example: >> hpd-gpio = <&gpx3 7 1>; >> ddc = <&hdmi_ddc_node>; >> phy = <&hdmi_phy_node>; >> + samsung,syscon-phandle = <&pmu_system_controller>; >> }; >> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c >> index b03e721..f5e188f 100644 >> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c >> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c >> @@ -38,6 +38,8 @@ >> #include <linux/of_gpio.h> >> #include <linux/hdmi.h> >> #include <linux/component.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/regmap.h> >> >> #include <drm/exynos_drm.h> >> >> @@ -81,7 +83,6 @@ struct hdmi_resources { >> struct clk *sclk_hdmi; >> struct clk *sclk_pixel; >> struct clk *sclk_hdmiphy; >> - struct clk *hdmiphy; >> struct clk *mout_hdmi; >> struct regulator_bulk_data *regul_bulk; >> int regul_count; >> @@ -208,6 +209,7 @@ struct hdmi_context { >> const struct hdmiphy_config *phy_confs; >> unsigned int phy_conf_count; >> >> + struct regmap *pmureg; >> enum hdmi_type type; >> }; >> >> @@ -2013,7 +2015,10 @@ static void hdmi_poweron(struct exynos_drm_display *display) >> if (regulator_bulk_enable(res->regul_count, res->regul_bulk)) >> DRM_DEBUG_KMS("failed to enable regulator bulk\n"); >> >> - clk_prepare_enable(res->hdmiphy); >> + /* set pmu hdmiphy control bit to enable hdmiphy */ >> + regmap_update_bits(hdata->pmureg, PMU_HDMI_PHY_CONTROL, >> + PMU_HDMI_PHY_ENABLE_BIT, 1); >> + >> clk_prepare_enable(res->hdmi); >> clk_prepare_enable(res->sclk_hdmi); >> >> @@ -2040,7 +2045,11 @@ static void hdmi_poweroff(struct exynos_drm_display *display) >> >> clk_disable_unprepare(res->sclk_hdmi); >> clk_disable_unprepare(res->hdmi); >> - clk_disable_unprepare(res->hdmiphy); >> + >> + /* reset pmu hdmiphy control bit to disable hdmiphy */ >> + regmap_update_bits(hdata->pmureg, PMU_HDMI_PHY_CONTROL, >> + PMU_HDMI_PHY_ENABLE_BIT, 0); >> + >> regulator_bulk_disable(res->regul_count, res->regul_bulk); >> >> pm_runtime_put_sync(hdata->dev); >> @@ -2143,11 +2152,6 @@ static int hdmi_resources_init(struct hdmi_context *hdata) >> DRM_ERROR("failed to get clock 'sclk_hdmiphy'\n"); >> goto fail; >> } >> - res->hdmiphy = devm_clk_get(dev, "hdmiphy"); >> - if (IS_ERR(res->hdmiphy)) { >> - DRM_ERROR("failed to get clock 'hdmiphy'\n"); >> - goto fail; >> - } >> res->mout_hdmi = devm_clk_get(dev, "mout_hdmi"); >> if (IS_ERR(res->mout_hdmi)) { >> DRM_ERROR("failed to get clock 'mout_hdmi'\n"); >> @@ -2353,6 +2357,13 @@ static int hdmi_probe(struct platform_device *pdev) >> goto err_hdmiphy; >> } >> >> + hdata->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, >> + "samsung,syscon-phandle"); >> + if (IS_ERR(hdata->pmureg)) { >> + DRM_ERROR("syscon regmap lookup failed.\n"); >> + goto err_hdmiphy; >> + } >> + >> pm_runtime_enable(dev); >> hdmi_display.ctx = hdata; >> >> diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h >> index 84a69cd..6d846b9 100644 >> --- a/drivers/gpu/drm/exynos/regs-hdmi.h >> +++ b/drivers/gpu/drm/exynos/regs-hdmi.h >> @@ -585,4 +585,8 @@ >> #define HDMI_PHY_DISABLE_MODE_SET 0x80 >> #define HDMI_PHY_ENABLE_MODE_SET 0x00 >> >> +/* PMU Registers for PHY */ >> +#define PMU_HDMI_PHY_CONTROL 0x700 >> +#define PMU_HDMI_PHY_ENABLE_BIT BIT(0) >> + >> #endif /* SAMSUNG_REGS_HDMI_H */ >> -- >> 1.7.9.5 >> > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index 75ada04..1fd8cf9 100644 --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt @@ -28,6 +28,7 @@ Required properties: "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". - ddc: phandle to the hdmi ddc node - phy: phandle to the hdmi phy node +- samsung,syscon-phandle: phandle for system controller node for PMU. Example: @@ -38,4 +39,5 @@ Example: hpd-gpio = <&gpx3 7 1>; ddc = <&hdmi_ddc_node>; phy = <&hdmi_phy_node>; + samsung,syscon-phandle = <&pmu_system_controller>; }; diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index b03e721..f5e188f 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -38,6 +38,8 @@ #include <linux/of_gpio.h> #include <linux/hdmi.h> #include <linux/component.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <drm/exynos_drm.h> @@ -81,7 +83,6 @@ struct hdmi_resources { struct clk *sclk_hdmi; struct clk *sclk_pixel; struct clk *sclk_hdmiphy; - struct clk *hdmiphy; struct clk *mout_hdmi; struct regulator_bulk_data *regul_bulk; int regul_count; @@ -208,6 +209,7 @@ struct hdmi_context { const struct hdmiphy_config *phy_confs; unsigned int phy_conf_count; + struct regmap *pmureg; enum hdmi_type type; }; @@ -2013,7 +2015,10 @@ static void hdmi_poweron(struct exynos_drm_display *display) if (regulator_bulk_enable(res->regul_count, res->regul_bulk)) DRM_DEBUG_KMS("failed to enable regulator bulk\n"); - clk_prepare_enable(res->hdmiphy); + /* set pmu hdmiphy control bit to enable hdmiphy */ + regmap_update_bits(hdata->pmureg, PMU_HDMI_PHY_CONTROL, + PMU_HDMI_PHY_ENABLE_BIT, 1); + clk_prepare_enable(res->hdmi); clk_prepare_enable(res->sclk_hdmi); @@ -2040,7 +2045,11 @@ static void hdmi_poweroff(struct exynos_drm_display *display) clk_disable_unprepare(res->sclk_hdmi); clk_disable_unprepare(res->hdmi); - clk_disable_unprepare(res->hdmiphy); + + /* reset pmu hdmiphy control bit to disable hdmiphy */ + regmap_update_bits(hdata->pmureg, PMU_HDMI_PHY_CONTROL, + PMU_HDMI_PHY_ENABLE_BIT, 0); + regulator_bulk_disable(res->regul_count, res->regul_bulk); pm_runtime_put_sync(hdata->dev); @@ -2143,11 +2152,6 @@ static int hdmi_resources_init(struct hdmi_context *hdata) DRM_ERROR("failed to get clock 'sclk_hdmiphy'\n"); goto fail; } - res->hdmiphy = devm_clk_get(dev, "hdmiphy"); - if (IS_ERR(res->hdmiphy)) { - DRM_ERROR("failed to get clock 'hdmiphy'\n"); - goto fail; - } res->mout_hdmi = devm_clk_get(dev, "mout_hdmi"); if (IS_ERR(res->mout_hdmi)) { DRM_ERROR("failed to get clock 'mout_hdmi'\n"); @@ -2353,6 +2357,13 @@ static int hdmi_probe(struct platform_device *pdev) goto err_hdmiphy; } + hdata->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,syscon-phandle"); + if (IS_ERR(hdata->pmureg)) { + DRM_ERROR("syscon regmap lookup failed.\n"); + goto err_hdmiphy; + } + pm_runtime_enable(dev); hdmi_display.ctx = hdata; diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h index 84a69cd..6d846b9 100644 --- a/drivers/gpu/drm/exynos/regs-hdmi.h +++ b/drivers/gpu/drm/exynos/regs-hdmi.h @@ -585,4 +585,8 @@ #define HDMI_PHY_DISABLE_MODE_SET 0x80 #define HDMI_PHY_ENABLE_MODE_SET 0x00 +/* PMU Registers for PHY */ +#define PMU_HDMI_PHY_CONTROL 0x700 +#define PMU_HDMI_PHY_ENABLE_BIT BIT(0) + #endif /* SAMSUNG_REGS_HDMI_H */
Exynos drm hdmi driver used to get dummy hdmiphy clock to control the PMU bit for hdmiphy. This bit needs to be set before setting any resolution to hdmi hardware. This was handled using dummy hdmiphy clock which is removed here. PMU is already defined as system controller for exynos SoCs. Hdmi driver is modified to control the phy enable bit inside PMU using regmap interfaces. Devicetree binding document for hdmi is also updated. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> --- V2: 1) Squashed hdmiphy clock cleanup patch. 2) Addressed comments related to indentation, using BIT macro while definnig bits and using IS_ERR check while verifying regmap handle. This patch is based on exynos-drm-next branch. .../devicetree/bindings/video/exynos_hdmi.txt | 2 ++ drivers/gpu/drm/exynos/exynos_hdmi.c | 27 ++++++++++++++------ drivers/gpu/drm/exynos/regs-hdmi.h | 4 +++ 3 files changed, 25 insertions(+), 8 deletions(-)