| Message ID | 1400762084-31606-2-git-send-email-maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Vinod Koul |
| Headers | show |
On Thu, May 22, 2014 at 8:34 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The Allwinner A31 DMA controller is rather simple to describe in the DT. Add > the bindings documentation. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > .../devicetree/bindings/dma/sun6i-dma.txt | 45 ++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txt > > diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt > new file mode 100644 > index 000000000000..5d7c86d52665 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt > @@ -0,0 +1,45 @@ > +Allwinner A31 DMA Controller > + > +This driver follows the generic DMA bindings defined in dma.txt. > + > +Required properties: > + > +- compatible: Must be "allwinner,sun6i-a31-dma" > +- reg: Should contain the registers base address and length > +- interrupts: Should contain a reference to the interrupt used by this device > +- clocks: Should contain a reference to the parent AHB clock > +- resets: Should contain a reference to the reset controller asserting > + this device in reset Extra spaces between the leading tabs. (Gmail messes up whitespaces, please see original mail.) > +- #dma-cells : Should be 1, a single cell holding a line request number > + > +Example: > + dma: dma-controller@01c02000 { > + compatible = "allwinner,sun6i-a31-dma"; > + reg = <0x01c02000 0x1000>; > + interrupts = <0 50 4>; > + clocks = <&ahb1_gates 6>; > + resets = <&ahb1_rst 6>; > + #dma-cells = <1>; > + }; > + > +Clients: > + > +DMA clients connected to the A31 DMA controller must use the format > +described in the dma.txt file, using a two-cell specifier for each > +channel: a phandle plus one integer cells. > +The two cells in order are: > + > +1. A phandle pointing to the DMA controller. > +2. The port ID as specified in the datasheet > + > +Example: > +spi2: spi@01c6a000 { > + compatible = "allwinner,sun6i-a31-spi"; > + reg = <0x01c6a000 0x1000>; > + interrupts = <0 67 4>; > + clocks = <&ahb1_gates 22>, <&spi2_clk>; > + clock-names = "ahb", "mod"; > + dmas = <&dma 25>, <&dma 25>; > + dma-names = "rx", "tx"; > + resets = <&ahb1_rst 22>; > +}; > -- > 1.9.3 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt new file mode 100644 index 000000000000..5d7c86d52665 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -0,0 +1,45 @@ +Allwinner A31 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun6i-a31-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- resets: Should contain a reference to the reset controller asserting + this device in reset +- #dma-cells : Should be 1, a single cell holding a line request number + +Example: + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + +Clients: + +DMA clients connected to the A31 DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each +channel: a phandle plus one integer cells. +The two cells in order are: + +1. A phandle pointing to the DMA controller. +2. The port ID as specified in the datasheet + +Example: +spi2: spi@01c6a000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c6a000 0x1000>; + interrupts = <0 67 4>; + clocks = <&ahb1_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; + resets = <&ahb1_rst 22>; +};
The Allwinner A31 DMA controller is rather simple to describe in the DT. Add the bindings documentation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- .../devicetree/bindings/dma/sun6i-dma.txt | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txt