| Message ID | cc612cd3f24f01cfc8fd3e81b1027ff94862e8b4.1401700579.git.marcel@ziswiler.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 06/02/2014 03:43 AM, Marcel Ziswiler wrote: > The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. > i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, > SPI bus and PWM LEDs generically accessible from user space and an > LM95245 temperature sensor chip. The later four can also be found on > the Colibri T30 module. > > While at it move the NEON entry down to its proper place to have it all > nicely ordered again. > > Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> > --- > BTW: How about TEGRA_EMC_SCALING_ENABLE I thought a patch was sent to remove that. Perhaps the patch was only sent to tegra_defconfig. > ... MTD_M25P80 which depends on MTD_SPI_NOR I've seen patches to fix that too.
On 06/02/2014 06:00 PM, Stephen Warren wrote: >> BTW: How about TEGRA_EMC_SCALING_ENABLE > > I thought a patch was sent to remove that. Perhaps the patch was only > sent to tegra_defconfig. > >> ... MTD_M25P80 which depends on MTD_SPI_NOR > > I've seen patches to fix that too. Yes, you are right. I have seen patches as well but none of them made it yet I guess.
On Mon, Jun 2, 2014 at 2:43 AM, Marcel Ziswiler <marcel@ziswiler.com> wrote: > The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. > i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, > SPI bus and PWM LEDs generically accessible from user space and an > LM95245 temperature sensor chip. The later four can also be found on > the Colibri T30 module. > > While at it move the NEON entry down to its proper place to have it all > nicely ordered again. > > Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> > --- > BTW: How about TEGRA_EMC_SCALING_ENABLE, MACH_UX500_DT, OMAP_USB3 and > MMC_SUNXI which I haven't found any mentioning anywhere, MTD_M25P80 > which depends on MTD_SPI_NOR or DOVE_THERMAL which depends on the > legacy ARCH_DOVE (besides USE_OF of course) being not much of multi > compatible? Can you resend towards the end of the merge window, please? We should make a pass and update anything new that has been merged for 3.16 around then. -Olof
On 06/02/2014 11:01 AM, Olof Johansson wrote: > On Mon, Jun 2, 2014 at 2:43 AM, Marcel Ziswiler <marcel@ziswiler.com> wrote: >> The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. >> i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, >> SPI bus and PWM LEDs generically accessible from user space and an >> LM95245 temperature sensor chip. The later four can also be found on >> the Colibri T30 module. >> >> While at it move the NEON entry down to its proper place to have it all >> nicely ordered again. >> >> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> >> --- >> BTW: How about TEGRA_EMC_SCALING_ENABLE, MACH_UX500_DT, OMAP_USB3 and >> MMC_SUNXI which I haven't found any mentioning anywhere, MTD_M25P80 >> which depends on MTD_SPI_NOR or DOVE_THERMAL which depends on the >> legacy ARCH_DOVE (besides USE_OF of course) being not much of multi >> compatible? > > Can you resend towards the end of the merge window, please? We should > make a pass and update anything new that has been merged for 3.16 > around then. I think the content in this patch is for 3.17. The issues mentioned below --- would be worth fixing for 3.16.
On 06/02/2014 07:15 PM, Stephen Warren wrote: > I think the content in this patch is for 3.17. The issues mentioned > below --- would be worth fixing for 3.16. It sure is your call. I feared it being too late for 3.16 now with Linus having opened the merge window presumably one week early.
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 7f4645c..7cfc176 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -65,7 +65,6 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_CA9X4=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_NEON=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_PCI=y CONFIG_PCI_MSI=y @@ -81,6 +80,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_NEON=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -132,6 +132,7 @@ CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_KS8851=y @@ -155,6 +156,8 @@ CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y CONFIG_SERIO_AMBAKMI=y @@ -200,6 +203,7 @@ CONFIG_SPI_SUN6I=y CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y +CONFIG_SPI_SPIDEV=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y CONFIG_GPIO_SYSFS=y @@ -217,6 +221,7 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_SUN6I=y CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y @@ -227,6 +232,7 @@ CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y @@ -303,6 +309,9 @@ CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SUNXI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_PWM=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y
The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 resp. i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, SPI bus and PWM LEDs generically accessible from user space and an LM95245 temperature sensor chip. The later four can also be found on the Colibri T30 module. While at it move the NEON entry down to its proper place to have it all nicely ordered again. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> --- BTW: How about TEGRA_EMC_SCALING_ENABLE, MACH_UX500_DT, OMAP_USB3 and MMC_SUNXI which I haven't found any mentioning anywhere, MTD_M25P80 which depends on MTD_SPI_NOR or DOVE_THERMAL which depends on the legacy ARCH_DOVE (besides USE_OF of course) being not much of multi compatible? arch/arm/configs/multi_v7_defconfig | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)