| Message ID | 1402063412-10407-1-git-send-email-sviau@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 06/06/14 07:03, Stephane Viau wrote: > The clock driver usually complains when a clock is being prepared > before setting its rate. It is the case here for "core_clk" which > needs to be set at 19.2 MHz before we attempt a prepare_enable(). That's only true in the downstream vendor kernel. Upstream we detect all rates when clocks are registered. Given that 19.2Mhz is the default rate out of reset for this clock this patch is fairly useless.
On Mon, Jun 9, 2014 at 1:56 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: > On 06/06/14 07:03, Stephane Viau wrote: >> The clock driver usually complains when a clock is being prepared >> before setting its rate. It is the case here for "core_clk" which >> needs to be set at 19.2 MHz before we attempt a prepare_enable(). > > That's only true in the downstream vendor kernel. Upstream we detect all > rates when clocks are registered. Given that 19.2Mhz is the default rate > out of reset for this clock this patch is fairly useless. > well, I've got this patch (with a slight tweak) queued up already.. I'm tempted to keep it, unless downstream kernel can be fixed, just to make it easier to sync things back to downstream kernel.. BR, -R > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > hosted by The Linux Foundation > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c index ae750f6..7f7aade 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c @@ -277,6 +277,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data) static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"}; static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"}; static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"}; + static unsigned long hpd_clk_freq[] = {0, 19200000, 0}; static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"}; config.phy_init = hdmi_phy_8x74_init; @@ -286,6 +287,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data) config.pwr_reg_names = pwr_reg_names; config.pwr_reg_cnt = ARRAY_SIZE(pwr_reg_names); config.hpd_clk_names = hpd_clk_names; + config.hpd_freq = hpd_clk_freq; config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names); config.pwr_clk_names = pwr_clk_names; config.pwr_clk_cnt = ARRAY_SIZE(pwr_clk_names); diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h index 9fafee6..9d7723c 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.h +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h @@ -87,6 +87,7 @@ struct hdmi_platform_config { /* clks that need to be on for hpd: */ const char **hpd_clk_names; + const long unsigned *hpd_freq; int hpd_clk_cnt; /* clks that need to be on for screen pwr (ie pixel clk): */ diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c index 7dedfdd..93d1551 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c @@ -127,6 +127,14 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector) } for (i = 0; i < config->hpd_clk_cnt; i++) { + if (config->hpd_freq[i]) { + ret = clk_set_rate(hdmi->hpd_clks[i], + config->hpd_freq[i]); + if (ret) + dev_warn(dev->dev, "failed to set clk %s (%d)\n", + config->hpd_clk_names[i], ret); + } + ret = clk_prepare_enable(hdmi->hpd_clks[i]); if (ret) { dev_err(dev->dev, "failed to enable hpd clk: %s (%d)\n",
The clock driver usually complains when a clock is being prepared before setting its rate. It is the case here for "core_clk" which needs to be set at 19.2 MHz before we attempt a prepare_enable(). Signed-off-by: Stephane Viau <sviau@codeaurora.org> --- drivers/gpu/drm/msm/hdmi/hdmi.c | 2 ++ drivers/gpu/drm/msm/hdmi/hdmi.h | 1 + drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 8 ++++++++ 3 files changed, 11 insertions(+)