@@ -377,6 +377,15 @@ config REGULATOR_MAX77693
and one current regulator 'CHARGER'. This is suitable for
Exynos-4x12 chips.
+config REGULATOR_MAX77802
+ tristate "Maxim 77802 regulator"
+ depends on MFD_MAX77802
+ help
+ This driver controls a Maxim 77802 regulator
+ via I2C bus. The provided regulator is suitable for
+ Exynos-5 chips to control various voltages. It includes
+ support for control of voltage and ramp speed.
+
config REGULATOR_MC13XXX_CORE
tristate
@@ -51,6 +51,7 @@ obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
+obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
new file mode 100644
@@ -0,0 +1,678 @@
+/*
+ * max77802.c - Regulator driver for the Maxim 77802
+ *
+ * Copyright (C) 2013-2014 Google, Inc
+ * Simon Glass <sjg@chromium.org>
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Chiwoong Byun <woong.byun@smasung.com>
+ * Jonghwa Lee <jonghwa3.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This driver is based on max8997.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/max77802.h>
+#include <linux/mfd/max77802-private.h>
+
+/* Default ramp delay in case it is not manually set */
+#define MAX77802_RAMP_DELAY 100000 /* uV/us */
+
+#define MAX77802_OPMODE_SHIFT_LDO 6
+#define MAX77802_OPMODE_BUCK234_SHIFT 4
+#define MAX77802_OPMODE_MASK 0x3
+
+#define MAX77802_VSEL_MASK 0x3F
+#define MAX77802_DVS_VSEL_MASK 0xFF
+
+#define MAX77802_RAMP_RATE_MASK_2BIT 0xC0
+#define MAX77802_RAMP_RATE_SHIFT_2BIT 6
+#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0
+#define MAX77802_RAMP_RATE_SHIFT_4BIT 4
+
+/* LDO16, LDO22 and LDO31 are not available on MAX77802 */
+#define MAX77802_MAX_REGULATORS (MAX77802_REG_MAX - 3)
+
+/* MAX77802 has two register formats: 2-bit and 4-bit */
+static const unsigned int ramp_table_77802_2bit[] = {
+ 12500,
+ 25000,
+ 50000,
+ 100000,
+};
+
+static unsigned int ramp_table_77802_4bit[] = {
+ 1000, 2000, 3030, 4000,
+ 5000, 5880, 7140, 8330,
+ 9090, 10000, 11110, 12500,
+ 16670, 25000, 50000, 100000,
+};
+
+struct max77802_regulator_prv {
+ int num_regulators;
+ struct regulator_dev *rdev[MAX77802_MAX_REGULATORS];
+ unsigned int opmode[MAX77802_MAX_REGULATORS];
+};
+
+static int max77802_get_opmode_shift(int id)
+{
+ if (id >= MAX77802_LDO1 && id <= MAX77802_LDO35)
+ return MAX77802_OPMODE_SHIFT_LDO;
+ else if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 &&
+ id <= MAX77802_BUCK10))
+ return 0;
+ else if (id >= MAX77802_BUCK2 && id <= MAX77802_BUCK4)
+ return MAX77802_OPMODE_BUCK234_SHIFT;
+ else
+ return -EINVAL;
+}
+
+/*
+ * Some BUCKS supports Normal[ON/OFF] mode during suspend
+ *
+ * BUCK 1, 6, 2-4, 5, 7-10 (all)
+ *
+ * The other mode (0x02) will make pwrreq switch between normal
+ * and low power.
+ */
+static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int val = MAX77802_OPMODE_STANDBY;
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ int shift = max77802_get_opmode_shift(id);
+
+ max77802->opmode[id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val << shift);
+}
+
+/*
+ * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state
+ *
+ * LDOs 3-7, 9-14, 18-26, 28, 29, 32-34, 1, 2, 8, 15, 17, 27, 30, 35 (all)
+ *
+ * LDOs 1, 20, 21, and 3, mode 1 is not supported
+ */
+static int max77802_ldo_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ unsigned int val;
+ int shift = max77802_get_opmode_shift(id);
+
+ switch (mode) {
+ case REGULATOR_MODE_IDLE: /* ON in LP Mode */
+ val = MAX77802_OPMODE_LP;
+ break;
+ case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
+ val = MAX77802_OPMODE_NORMAL;
+ break;
+ case REGULATOR_MODE_STANDBY: /* switch off */
+ if (id != MAX77802_LDO1 && id != MAX77802_LDO20 &&
+ id != MAX77802_LDO21 && id != MAX77802_LDO3) {
+ val = MAX77802_OPMODE_STANDBY;
+ break;
+ }
+ /* no break */
+ default:
+ pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
+ rdev->desc->name, mode);
+ return -EINVAL;
+ }
+
+ max77802->opmode[rdev_get_id(rdev)] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val << shift);
+}
+
+static int max77802_enable(struct regulator_dev *rdev)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+ int shift = max77802_get_opmode_shift(id);
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ max77802->opmode[id] << shift);
+}
+
+static int max77802_find_ramp_value(struct regulator_dev *rdev,
+ const unsigned int limits[], int size,
+ unsigned int ramp_delay)
+{
+ int i;
+
+ for (i = 0; i < size; i++) {
+ if (ramp_delay <= limits[i])
+ return i;
+ }
+
+ /* Use maximum value for no ramp control */
+ pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
+ rdev->desc->name, ramp_delay);
+ return size - 1;
+}
+
+/* Used for BUCKs 2-4 */
+static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev,
+ int ramp_delay)
+{
+ int id = rdev_get_id(rdev);
+ unsigned int ramp_value;
+
+ if (id > MAX77802_BUCK4) {
+ pr_warn("%s: regulator_suspend_mode: ramp delay not supported\n",
+ rdev->desc->name);
+ return -EINVAL;
+ }
+ ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit,
+ ARRAY_SIZE(ramp_table_77802_2bit), ramp_delay);
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ MAX77802_RAMP_RATE_MASK_2BIT,
+ ramp_value << MAX77802_RAMP_RATE_SHIFT_2BIT);
+}
+
+/* For BUCK1, 6 */
+static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev,
+ int ramp_delay)
+{
+ unsigned int ramp_value;
+
+ ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_4bit,
+ ARRAY_SIZE(ramp_table_77802_4bit), ramp_delay);
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ MAX77802_RAMP_RATE_MASK_4BIT,
+ ramp_value << MAX77802_RAMP_RATE_SHIFT_4BIT);
+}
+
+/*
+ * LDOs 3-7, 9-14, 18-26, 28, 29, 32-34, 1, 2, 8, 15, 17, 27, 30, 35 (all)
+ */
+static struct regulator_ops max77802_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_mode = max77802_ldo_set_suspend_mode,
+};
+
+/* BUCKS 1, 6 */
+static struct regulator_ops max77802_buck_16_dvs_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_4bit,
+ .set_suspend_disable = max77802_buck_set_suspend_disable,
+};
+
+/* BUCKs 2-4, 5, 7-10 */
+static struct regulator_ops max77802_buck_dvs_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_2bit,
+ .set_suspend_disable = max77802_buck_set_suspend_disable,
+};
+
+/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */
+#define regulator_77802_desc_p_ldo(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77802_LDO##num, \
+ .ops = &max77802_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 800000, \
+ .uV_step = 50000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+}
+
+/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */
+#define regulator_77802_desc_n_ldo(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77802_LDO##num, \
+ .ops = &max77802_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 800000, \
+ .uV_step = 25000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+}
+
+/* BUCKs 1, 6 */
+#define regulator_77802_desc_16_buck(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .ops = &max77802_buck_16_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 612500, \
+ .uV_step = 6250, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 8, \
+ .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \
+ .vsel_mask = MAX77802_DVS_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
+ .enable_mask = MAX77802_OPMODE_MASK, \
+}
+
+/* BUCKS 2-4 */
+#define regulator_77802_desc_234_buck(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .ops = &max77802_buck_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 600000, \
+ .uV_step = 6250, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 0x91, \
+ .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \
+ .vsel_mask = MAX77802_DVS_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
+ .enable_mask = MAX77802_OPMODE_MASK << \
+ MAX77802_OPMODE_BUCK234_SHIFT, \
+}
+
+/* BUCK 5 */
+#define regulator_77802_desc_buck5(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .ops = &max77802_buck_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 750000, \
+ .uV_step = 50000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_BUCK5OUT, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK5CTRL, \
+ .enable_mask = MAX77802_OPMODE_MASK, \
+}
+
+/* BUCKs 7-10 */
+#define regulator_77802_desc_buck7_10(num) { \
+ .name = "BUCK"#num, \
+ .id = MAX77802_BUCK##num, \
+ .ops = &max77802_buck_dvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = 750000, \
+ .uV_step = 50000, \
+ .ramp_delay = MAX77802_RAMP_DELAY, \
+ .n_voltages = 1 << 6, \
+ .vsel_reg = MAX77802_REG_BUCK7OUT + (num - 7) * 3, \
+ .vsel_mask = MAX77802_VSEL_MASK, \
+ .enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \
+ .enable_mask = MAX77802_OPMODE_MASK, \
+}
+
+static struct regulator_desc regulators[] = {
+ regulator_77802_desc_n_ldo(1),
+ regulator_77802_desc_n_ldo(2),
+ regulator_77802_desc_p_ldo(3),
+ regulator_77802_desc_p_ldo(4),
+ regulator_77802_desc_p_ldo(5),
+ regulator_77802_desc_p_ldo(6),
+ regulator_77802_desc_p_ldo(7),
+ regulator_77802_desc_n_ldo(8),
+ regulator_77802_desc_p_ldo(9),
+ regulator_77802_desc_p_ldo(10),
+ regulator_77802_desc_p_ldo(11),
+ regulator_77802_desc_p_ldo(12),
+ regulator_77802_desc_p_ldo(13),
+ regulator_77802_desc_p_ldo(14),
+ regulator_77802_desc_n_ldo(15),
+ regulator_77802_desc_n_ldo(17),
+ regulator_77802_desc_p_ldo(18),
+ regulator_77802_desc_p_ldo(19),
+ regulator_77802_desc_p_ldo(20),
+ regulator_77802_desc_p_ldo(21),
+ regulator_77802_desc_p_ldo(23),
+ regulator_77802_desc_p_ldo(24),
+ regulator_77802_desc_p_ldo(25),
+ regulator_77802_desc_p_ldo(26),
+ regulator_77802_desc_n_ldo(27),
+ regulator_77802_desc_p_ldo(28),
+ regulator_77802_desc_p_ldo(29),
+ regulator_77802_desc_n_ldo(30),
+ regulator_77802_desc_p_ldo(32),
+ regulator_77802_desc_p_ldo(33),
+ regulator_77802_desc_p_ldo(34),
+ regulator_77802_desc_n_ldo(35),
+ regulator_77802_desc_16_buck(1),
+ regulator_77802_desc_234_buck(2),
+ regulator_77802_desc_234_buck(3),
+ regulator_77802_desc_234_buck(4),
+ regulator_77802_desc_buck5(5),
+ regulator_77802_desc_16_buck(6),
+ regulator_77802_desc_buck7_10(7),
+ regulator_77802_desc_buck7_10(8),
+ regulator_77802_desc_buck7_10(9),
+ regulator_77802_desc_buck7_10(10),
+};
+
+#ifdef CONFIG_OF
+static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct max77802_platform_data *pdata)
+{
+ struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *pmic_np, *regulators_np;
+ struct max77802_regulator_data *rdata;
+ struct of_regulator_match rmatch;
+ unsigned int i;
+
+ pmic_np = iodev->dev->of_node;
+ regulators_np = of_get_child_by_name(pmic_np, "voltage-regulators");
+ if (!regulators_np) {
+ dev_err(&pdev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ pdata->num_regulators = ARRAY_SIZE(regulators);
+ rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ of_node_put(regulators_np);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < pdata->num_regulators; i++) {
+ rmatch.name = regulators[i].name;
+ rmatch.init_data = NULL;
+ rmatch.of_node = NULL;
+ if (of_regulator_match(&pdev->dev, regulators_np, &rmatch,
+ 1) != 1) {
+ dev_warn(&pdev->dev,
+ "No matching regulator for '%s'\n", rmatch.name);
+ continue;
+ }
+ rdata[i].initdata = rmatch.init_data;
+ rdata[i].of_node = rmatch.of_node;
+ rdata[i].id = regulators[i].id;
+ }
+
+ pdata->regulators = rdata;
+ of_node_put(regulators_np);
+
+ return 0;
+}
+#else
+static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct max77802_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+/**
+ * max77802_setup_gpios - init DVS-related GPIOs
+ *
+ * This function claims / initalizations GPIOs related to DVS if they are
+ * defined. This may have the effect of switching voltages if the
+ * pdata->buck_default_idx does not match the boot time state of pins.
+ */
+static int max77802_setup_gpios(struct device *dev,
+ struct max77802_platform_data *pdata)
+{
+ int buck_default_idx = pdata->buck_default_idx;
+ int ret;
+ int i;
+
+ /* Set all SELB high to avoid glitching while DVS is changing */
+ for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_selb); i++) {
+ int gpio = pdata->buck_gpio_selb[i];
+
+ /* OK if some GPIOs aren't defined */
+ if (!gpio_is_valid(gpio))
+ continue;
+
+ /* If a GPIO is valid, we'd better be able to claim it */
+ ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH,
+ "max77802 selb");
+ if (ret) {
+ dev_err(dev, "can't claim gpio[%d]: %d\n", i, ret);
+ return ret;
+ }
+ }
+
+ /* Set our initial setting */
+ for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_dvs); i++) {
+ int gpio = pdata->buck_gpio_dvs[i];
+
+ /* OK if some GPIOs aren't defined */
+ if (!gpio_is_valid(gpio))
+ continue;
+
+ /* If a GPIO is valid, we'd better be able to claim it */
+ ret = devm_gpio_request(dev, gpio, "max77802 dvs");
+ if (ret) {
+ dev_err(dev, "can't claim gpio[%d]: %d\n", i, ret);
+ return ret;
+ }
+ gpio_direction_output(gpio, (buck_default_idx >> i) & 1);
+ }
+
+ /* Now set SELB low to take effect */
+ for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_selb); i++) {
+ int gpio = pdata->buck_gpio_selb[i];
+
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, 0);
+ }
+
+ return 0;
+}
+
+/**
+ * max77802_read_gpios - read the current state of the dvs GPIOs
+ *
+ * We call this function at bootup to detect what slot the firmware was
+ * using for the DVS GPIOs. That way we can properly preserve the firmware's
+ * voltage settings
+ */
+static int max77802_read_gpios(struct max77802_platform_data *pdata)
+{
+ int buck_default_idx = pdata->buck_default_idx;
+ int result = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_dvs); i++) {
+ int gpio = pdata->buck_gpio_dvs[i];
+
+ /* OK if some GPIOs aren't defined; we'll use default */
+ if (!gpio_is_valid(gpio)) {
+ result |= buck_default_idx & (1 << i);
+ continue;
+ }
+
+ if (gpio_get_value_cansleep(gpio))
+ result |= 1 << i;
+ }
+
+ return result;
+}
+
+static inline bool max77802_is_dvs_buck(int id)
+{
+ /* on 77802 bucks 1-4, 6 are */
+ return ((id >= MAX77802_BUCK1 && id <= MAX77802_BUCK4) ||
+ (id == MAX77802_BUCK6));
+}
+
+static void max77802_copy_reg(struct device *dev, struct regmap *regmap,
+ int from_reg, int to_reg)
+{
+ int val;
+ int ret;
+
+ if (from_reg == to_reg)
+ return;
+
+ ret = regmap_read(regmap, from_reg, &val);
+ if (!ret)
+ ret = regmap_write(regmap, to_reg, val);
+
+ if (ret)
+ dev_warn(dev, "Copy err %d => %d (%d)\n",
+ from_reg, to_reg, ret);
+}
+
+static int max77802_pmic_probe(struct platform_device *pdev)
+{
+ struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max77802_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct max77802_regulator_prv *max77802;
+ int i, ret = 0;
+ struct regulator_config config = { };
+ unsigned int reg;
+ int buck_default_idx;
+ int buck_old_idx;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ /* This is allocated by the MFD driver */
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data found for regulator\n");
+ return -ENODEV;
+ }
+
+ max77802 = devm_kzalloc(&pdev->dev,
+ sizeof(struct max77802_regulator_prv),
+ GFP_KERNEL);
+ if (!max77802)
+ return -ENOMEM;
+
+ if (iodev->dev->of_node) {
+ ret = max77802_pmic_dt_parse_pdata(pdev, pdata);
+ if (ret)
+ return ret;
+ }
+
+ if (pdata->num_regulators != MAX77802_MAX_REGULATORS) {
+ dev_err(&pdev->dev,
+ "Invalid initial data for regulator's initialiation: " \
+ "expected %d, pdata/dt provided %d\n",
+ MAX77802_MAX_REGULATORS,
+ pdata->num_regulators);
+ return -EINVAL;
+ }
+
+ config.dev = &pdev->dev;
+ config.regmap = iodev->regmap;
+ config.driver_data = max77802;
+ platform_set_drvdata(pdev, max77802);
+
+ buck_default_idx = pdata->buck_default_idx;
+ buck_old_idx = max77802_read_gpios(pdata);
+
+ for (i = 0; i < MAX77802_MAX_REGULATORS; i++) {
+ struct regulator_dev *rdev;
+ int id = pdata->regulators[i].id;
+
+ config.init_data = pdata->regulators[i].initdata;
+ config.of_node = pdata->regulators[i].of_node;
+
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+
+ if (max77802_is_dvs_buck(id)) {
+ /* Try to copy over data so we keep firmware settings */
+ reg = regulators[i].vsel_reg;
+ max77802_copy_reg(&pdev->dev, iodev->regmap,
+ reg + buck_old_idx,
+ reg + buck_default_idx);
+ regulators[i].vsel_reg += buck_default_idx;
+ }
+
+ rdev = devm_regulator_register(&pdev->dev,
+ ®ulators[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "regulator init failed for %d\n", i);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ ret = max77802_setup_gpios(&pdev->dev, pdata);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct platform_device_id max77802_pmic_id[] = {
+ {"max77802-pmic", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(platform, max77802_pmic_id);
+
+static struct platform_driver max77802_pmic_driver = {
+ .driver = {
+ .name = "max77802-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = max77802_pmic_probe,
+ .id_table = max77802_pmic_id,
+};
+
+static int __init max77802_pmic_init(void)
+{
+ return platform_driver_register(&max77802_pmic_driver);
+}
+subsys_initcall(max77802_pmic_init);
+
+static void __exit max77802_pmic_cleanup(void)
+{
+ platform_driver_unregister(&max77802_pmic_driver);
+}
+module_exit(max77802_pmic_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 77802 Regulator Driver");
+MODULE_AUTHOR("Simon Glass <sjg@chromium.org>");
+MODULE_LICENSE("GPL");
The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) regulators. This patch adds support for all these regulators found on the MAX77802 PMIC and is based on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77802.c | 678 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 688 insertions(+) create mode 100644 drivers/regulator/max77802.c