| Message ID | 1402543307-29800-5-git-send-email-iamjoonsoo.kim@lge.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Joonsoo Kim <iamjoonsoo.kim@lge.com> writes: > ppc kvm's cma area management needs alignment constraint on > cma region. So support it to prepare generalization of cma area > management functionality. > > Additionally, add some comments which tell us why alignment > constraint is needed on cma region. > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index 8a44c82..bc4c171 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -32,6 +32,7 @@ > #include <linux/swap.h> > #include <linux/mm_types.h> > #include <linux/dma-contiguous.h> > +#include <linux/log2.h> > > struct cma { > unsigned long base_pfn; > @@ -219,6 +220,7 @@ core_initcall(cma_init_reserved_areas); > * @size: Size of the reserved area (in bytes), > * @base: Base address of the reserved area optional, use 0 for any > * @limit: End address of the reserved memory (optional, 0 for any). > + * @alignment: Alignment for the contiguous memory area, should be power of 2 > * @res_cma: Pointer to store the created cma region. > * @fixed: hint about where to place the reserved area > * > @@ -233,15 +235,15 @@ core_initcall(cma_init_reserved_areas); > */ > static int __init __dma_contiguous_reserve_area(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > + phys_addr_t alignment, > struct cma **res_cma, bool fixed) > { > struct cma *cma = &cma_areas[cma_area_count]; > - phys_addr_t alignment; > int ret = 0; > > - pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, > - (unsigned long)size, (unsigned long)base, > - (unsigned long)limit); > + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", > + __func__, (unsigned long)size, (unsigned long)base, > + (unsigned long)limit, (unsigned long)alignment); > > /* Sanity checks */ > if (cma_area_count == ARRAY_SIZE(cma_areas)) { > @@ -253,8 +255,17 @@ static int __init __dma_contiguous_reserve_area(phys_addr_t size, > if (!size) > return -EINVAL; > > - /* Sanitise input arguments */ > - alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); > + if (alignment && !is_power_of_2(alignment)) > + return -EINVAL; > + > + /* > + * Sanitise input arguments. > + * CMA area should be at least MAX_ORDER - 1 aligned. Otherwise, > + * CMA area could be merged into other MIGRATE_TYPE by buddy mechanism > + * and CMA property will be broken. > + */ > + alignment = max(alignment, > + (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); > base = ALIGN(base, alignment); > size = ALIGN(size, alignment); > limit &= ~(alignment - 1); > @@ -302,7 +313,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > { > int ret; > > - ret = __dma_contiguous_reserve_area(size, base, limit, res_cma, fixed); > + ret = __dma_contiguous_reserve_area(size, base, limit, 0, > + res_cma, fixed); > if (ret) > return ret; > > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12, 2014 at 12:21:41PM +0900, Joonsoo Kim wrote: > ppc kvm's cma area management needs alignment constraint on > cma region. So support it to prepare generalization of cma area > management functionality. > > Additionally, add some comments which tell us why alignment > constraint is needed on cma region. > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index 8a44c82..bc4c171 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -32,6 +32,7 @@ > #include <linux/swap.h> > #include <linux/mm_types.h> > #include <linux/dma-contiguous.h> > +#include <linux/log2.h> > > struct cma { > unsigned long base_pfn; > @@ -219,6 +220,7 @@ core_initcall(cma_init_reserved_areas); > * @size: Size of the reserved area (in bytes), > * @base: Base address of the reserved area optional, use 0 for any > * @limit: End address of the reserved memory (optional, 0 for any). > + * @alignment: Alignment for the contiguous memory area, should be power of 2 > * @res_cma: Pointer to store the created cma region. > * @fixed: hint about where to place the reserved area > * Pz, move the all description to new API function rather than internal one. > @@ -233,15 +235,15 @@ core_initcall(cma_init_reserved_areas); > */ > static int __init __dma_contiguous_reserve_area(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > + phys_addr_t alignment, > struct cma **res_cma, bool fixed) > { > struct cma *cma = &cma_areas[cma_area_count]; > - phys_addr_t alignment; > int ret = 0; > > - pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, > - (unsigned long)size, (unsigned long)base, > - (unsigned long)limit); > + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", Why is it called by "align_order"? > + __func__, (unsigned long)size, (unsigned long)base, > + (unsigned long)limit, (unsigned long)alignment); > > /* Sanity checks */ > if (cma_area_count == ARRAY_SIZE(cma_areas)) { > @@ -253,8 +255,17 @@ static int __init __dma_contiguous_reserve_area(phys_addr_t size, > if (!size) > return -EINVAL; > > - /* Sanitise input arguments */ > - alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); > + if (alignment && !is_power_of_2(alignment)) > + return -EINVAL; > + > + /* > + * Sanitise input arguments. > + * CMA area should be at least MAX_ORDER - 1 aligned. Otherwise, > + * CMA area could be merged into other MIGRATE_TYPE by buddy mechanism I'm not a native but try for clear documenation. Pages both ends in CMA area could be merged into adjacent unmovable migratetype page by page allocator's buddy algorithm. In the case, you couldn't get a contiguous memory, which is not what we want. > + * and CMA property will be broken. > + */ > + alignment = max(alignment, > + (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); > base = ALIGN(base, alignment); > size = ALIGN(size, alignment); > limit &= ~(alignment - 1); > @@ -302,7 +313,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, > { > int ret; > > - ret = __dma_contiguous_reserve_area(size, base, limit, res_cma, fixed); > + ret = __dma_contiguous_reserve_area(size, base, limit, 0, > + res_cma, fixed); > if (ret) > return ret; > > -- > 1.7.9.5
On Thu, Jun 12, 2014 at 02:52:20PM +0900, Minchan Kim wrote: > On Thu, Jun 12, 2014 at 12:21:41PM +0900, Joonsoo Kim wrote: > > ppc kvm's cma area management needs alignment constraint on > > cma region. So support it to prepare generalization of cma area > > management functionality. > > > > Additionally, add some comments which tell us why alignment > > constraint is needed on cma region. > > > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > > index 8a44c82..bc4c171 100644 > > --- a/drivers/base/dma-contiguous.c > > +++ b/drivers/base/dma-contiguous.c > > @@ -32,6 +32,7 @@ > > #include <linux/swap.h> > > #include <linux/mm_types.h> > > #include <linux/dma-contiguous.h> > > +#include <linux/log2.h> > > > > struct cma { > > unsigned long base_pfn; > > @@ -219,6 +220,7 @@ core_initcall(cma_init_reserved_areas); > > * @size: Size of the reserved area (in bytes), > > * @base: Base address of the reserved area optional, use 0 for any > > * @limit: End address of the reserved memory (optional, 0 for any). > > + * @alignment: Alignment for the contiguous memory area, should be power of 2 > > * @res_cma: Pointer to store the created cma region. > > * @fixed: hint about where to place the reserved area > > * > > Pz, move the all description to new API function rather than internal one. Reason I leave all description as is is that I will remove it in following patch. I think that moving these makes patch bigger and hard to review. But, if it is necessary, I will do it. :) > > > @@ -233,15 +235,15 @@ core_initcall(cma_init_reserved_areas); > > */ > > static int __init __dma_contiguous_reserve_area(phys_addr_t size, > > phys_addr_t base, phys_addr_t limit, > > + phys_addr_t alignment, > > struct cma **res_cma, bool fixed) > > { > > struct cma *cma = &cma_areas[cma_area_count]; > > - phys_addr_t alignment; > > int ret = 0; > > > > - pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, > > - (unsigned long)size, (unsigned long)base, > > - (unsigned long)limit); > > + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", > > Why is it called by "align_order"? Oops... mistake. I will fix it. Thanks. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12 2014, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote: > ppc kvm's cma area management needs alignment constraint on I've noticed it earlier and cannot seem to get to terms with this. It should IMO be PPC, KVM and CMA since those are acronyms. But if you have strong feelings, it's not a big issue. > cma region. So support it to prepare generalization of cma area > management functionality. > > Additionally, add some comments which tell us why alignment > constraint is needed on cma region. > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > index 8a44c82..bc4c171 100644 > --- a/drivers/base/dma-contiguous.c > +++ b/drivers/base/dma-contiguous.c > @@ -219,6 +220,7 @@ core_initcall(cma_init_reserved_areas); > * @size: Size of the reserved area (in bytes), > * @base: Base address of the reserved area optional, use 0 for any > * @limit: End address of the reserved memory (optional, 0 for any). > + * @alignment: Alignment for the contiguous memory area, should be > power of 2 “must be power of 2 or zero”. > * @res_cma: Pointer to store the created cma region. > * @fixed: hint about where to place the reserved area > * > @@ -233,15 +235,15 @@ core_initcall(cma_init_reserved_areas); > */ > static int __init __dma_contiguous_reserve_area(phys_addr_t size, > phys_addr_t base, phys_addr_t limit, > + phys_addr_t alignment, > struct cma **res_cma, bool fixed) > { > struct cma *cma = &cma_areas[cma_area_count]; > - phys_addr_t alignment; > int ret = 0; > > - pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, > - (unsigned long)size, (unsigned long)base, > - (unsigned long)limit); > + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", > + __func__, (unsigned long)size, (unsigned long)base, > + (unsigned long)limit, (unsigned long)alignment); Nit: Align with the rest of the arguments, i.e.: + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", + __func__, (unsigned long)size, (unsigned long)base, + (unsigned long)limit, (unsigned long)alignment); > > /* Sanity checks */ > if (cma_area_count == ARRAY_SIZE(cma_areas)) {
On Thu, Jun 12, 2014 at 12:02:38PM +0200, Michal Nazarewicz wrote: > On Thu, Jun 12 2014, Joonsoo Kim <iamjoonsoo.kim@lge.com> wrote: > > ppc kvm's cma area management needs alignment constraint on > > I've noticed it earlier and cannot seem to get to terms with this. It > should IMO be PPC, KVM and CMA since those are acronyms. But if you > have strong feelings, it's not a big issue. Yes, I will fix it. > > > cma region. So support it to prepare generalization of cma area > > management functionality. > > > > Additionally, add some comments which tell us why alignment > > constraint is needed on cma region. > > > > Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> > > Acked-by: Michal Nazarewicz <mina86@mina86.com> > > > diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c > > index 8a44c82..bc4c171 100644 > > --- a/drivers/base/dma-contiguous.c > > +++ b/drivers/base/dma-contiguous.c > > @@ -219,6 +220,7 @@ core_initcall(cma_init_reserved_areas); > > * @size: Size of the reserved area (in bytes), > > * @base: Base address of the reserved area optional, use 0 for any > > * @limit: End address of the reserved memory (optional, 0 for any). > > + * @alignment: Alignment for the contiguous memory area, should be > > power of 2 > > “must be power of 2 or zero”. Okay. > > * @res_cma: Pointer to store the created cma region. > > * @fixed: hint about where to place the reserved area > > * > > @@ -233,15 +235,15 @@ core_initcall(cma_init_reserved_areas); > > */ > > static int __init __dma_contiguous_reserve_area(phys_addr_t size, > > phys_addr_t base, phys_addr_t limit, > > + phys_addr_t alignment, > > struct cma **res_cma, bool fixed) > > { > > struct cma *cma = &cma_areas[cma_area_count]; > > - phys_addr_t alignment; > > int ret = 0; > > > > - pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, > > - (unsigned long)size, (unsigned long)base, > > - (unsigned long)limit); > > + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", > > + __func__, (unsigned long)size, (unsigned long)base, > > + (unsigned long)limit, (unsigned long)alignment); > > Nit: Align with the rest of the arguments, i.e.: > > + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", > + __func__, (unsigned long)size, (unsigned long)base, > + (unsigned long)limit, (unsigned long)alignment); What's the difference between mine and yours? Thanks. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c index 8a44c82..bc4c171 100644 --- a/drivers/base/dma-contiguous.c +++ b/drivers/base/dma-contiguous.c @@ -32,6 +32,7 @@ #include <linux/swap.h> #include <linux/mm_types.h> #include <linux/dma-contiguous.h> +#include <linux/log2.h> struct cma { unsigned long base_pfn; @@ -219,6 +220,7 @@ core_initcall(cma_init_reserved_areas); * @size: Size of the reserved area (in bytes), * @base: Base address of the reserved area optional, use 0 for any * @limit: End address of the reserved memory (optional, 0 for any). + * @alignment: Alignment for the contiguous memory area, should be power of 2 * @res_cma: Pointer to store the created cma region. * @fixed: hint about where to place the reserved area * @@ -233,15 +235,15 @@ core_initcall(cma_init_reserved_areas); */ static int __init __dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, phys_addr_t limit, + phys_addr_t alignment, struct cma **res_cma, bool fixed) { struct cma *cma = &cma_areas[cma_area_count]; - phys_addr_t alignment; int ret = 0; - pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, - (unsigned long)size, (unsigned long)base, - (unsigned long)limit); + pr_debug("%s(size %lx, base %08lx, limit %08lx align_order %08lx)\n", + __func__, (unsigned long)size, (unsigned long)base, + (unsigned long)limit, (unsigned long)alignment); /* Sanity checks */ if (cma_area_count == ARRAY_SIZE(cma_areas)) { @@ -253,8 +255,17 @@ static int __init __dma_contiguous_reserve_area(phys_addr_t size, if (!size) return -EINVAL; - /* Sanitise input arguments */ - alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); + if (alignment && !is_power_of_2(alignment)) + return -EINVAL; + + /* + * Sanitise input arguments. + * CMA area should be at least MAX_ORDER - 1 aligned. Otherwise, + * CMA area could be merged into other MIGRATE_TYPE by buddy mechanism + * and CMA property will be broken. + */ + alignment = max(alignment, + (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); base = ALIGN(base, alignment); size = ALIGN(size, alignment); limit &= ~(alignment - 1); @@ -302,7 +313,8 @@ int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, { int ret; - ret = __dma_contiguous_reserve_area(size, base, limit, res_cma, fixed); + ret = __dma_contiguous_reserve_area(size, base, limit, 0, + res_cma, fixed); if (ret) return ret;
ppc kvm's cma area management needs alignment constraint on cma region. So support it to prepare generalization of cma area management functionality. Additionally, add some comments which tell us why alignment constraint is needed on cma region. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>