| Message ID | 7948240.P51u2omQa4@wuerfel (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 06/11/2014 09:49 AM, Arnd Bergmann wrote: > On Wednesday 11 June 2014 09:42:04 Nishanth Menon wrote: >> On 06/11/2014 09:35 AM, Arnd Bergmann wrote: >>> The OMAP4 camera support depends on I2C and VIDEO_V4L2, both >>> of which can be loadable modules. This causes build failures >>> if we want the camera driver to be built-in. >>> >>> This can be solved by turning the option into "tristate", >>> which unfortunately causes another problem, because the >>> driver incorrectly calls a platform-internal interface >>> for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. >>> To work around that, we can export those symbols, but >>> that isn't really the correct solution, as we should not >>> have dependencies on platform code this way. >>> >>> Signed-off-by: Arnd Bergmann <arnd@arndb.de> >>> --- >>> This is one of just two patches we currently need to get >>> 'make allmodconfig' to build again on ARM. >>> >>> diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c >>> index 751f354..05d2d98 100644 >>> --- a/arch/arm/mach-omap2/control.c >>> +++ b/arch/arm/mach-omap2/control.c >>> @@ -190,11 +190,13 @@ u32 omap4_ctrl_pad_readl(u16 offset) >>> { >>> return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); >>> } >>> +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_readl); >>> >>> void omap4_ctrl_pad_writel(u32 val, u16 offset) >>> { >>> writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); >>> } >>> +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_writel); >>> >>> #ifdef CONFIG_ARCH_OMAP3 >>> >>> diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig >>> index 78b0fba..0c3e3c1 100644 >>> --- a/drivers/staging/media/omap4iss/Kconfig >>> +++ b/drivers/staging/media/omap4iss/Kconfig >>> @@ -1,5 +1,5 @@ >>> config VIDEO_OMAP4 >>> - bool "OMAP 4 Camera support" >>> + tristate "OMAP 4 Camera support" >>> depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 >>> select VIDEOBUF2_DMA_CONTIG >>> ---help--- >>> >> >> This was discussed in detail here: >> http://marc.info/?t=140198692500001&r=1&w=2 >> Direct dependency from a staging driver to mach-omap2 driver is not >> something we'd like, right? > > So it was decided to just leave ARM allmodconfig broken? > > Why not at least do this instead? > > 8<---- > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 2001 > From: Arnd Bergmann <arnd@arndb.de> > Date: Tue, 21 Jan 2014 09:32:43 +0100 > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > of which can be loadable modules. This causes build failures > if we want the camera driver to be built-in. > > This can be solved by turning the option into "tristate", > which unfortunately causes another problem, because the > driver incorrectly calls a platform-internal interface > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > Instead, this patch just forbids the invalid configurations > and ensures that the driver can only be built if all its > dependencies are built-in. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig > index 78b0fba..8afc6fe 100644 > --- a/drivers/staging/media/omap4iss/Kconfig > +++ b/drivers/staging/media/omap4iss/Kconfig > @@ -1,6 +1,6 @@ > config VIDEO_OMAP4 > bool "OMAP 4 Camera support" > - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > + depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 > select VIDEOBUF2_DMA_CONTIG > ---help--- > Driver for an OMAP 4 ISS controller. > I am ok with this if Tony and Laurent have no issues. Considering that Laurent was working on coverting iss driver to dt, the detailed discussion could take place at that point in time.
* Arnd Bergmann <arnd@arndb.de> [140611 07:51]: > On Wednesday 11 June 2014 09:42:04 Nishanth Menon wrote: > > On 06/11/2014 09:35 AM, Arnd Bergmann wrote: > > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > > > of which can be loadable modules. This causes build failures > > > if we want the camera driver to be built-in. > > > > > > This can be solved by turning the option into "tristate", > > > which unfortunately causes another problem, because the > > > driver incorrectly calls a platform-internal interface > > > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > > To work around that, we can export those symbols, but > > > that isn't really the correct solution, as we should not > > > have dependencies on platform code this way. > > > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > > --- > > > This is one of just two patches we currently need to get > > > 'make allmodconfig' to build again on ARM. > > > > > > diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c > > > index 751f354..05d2d98 100644 > > > --- a/arch/arm/mach-omap2/control.c > > > +++ b/arch/arm/mach-omap2/control.c > > > @@ -190,11 +190,13 @@ u32 omap4_ctrl_pad_readl(u16 offset) > > > { > > > return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); > > > } > > > +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_readl); > > > > > > void omap4_ctrl_pad_writel(u32 val, u16 offset) > > > { > > > writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); > > > } > > > +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_writel); > > > > > > #ifdef CONFIG_ARCH_OMAP3 > > > > > > diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig > > > index 78b0fba..0c3e3c1 100644 > > > --- a/drivers/staging/media/omap4iss/Kconfig > > > +++ b/drivers/staging/media/omap4iss/Kconfig > > > @@ -1,5 +1,5 @@ > > > config VIDEO_OMAP4 > > > - bool "OMAP 4 Camera support" > > > + tristate "OMAP 4 Camera support" > > > depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > > > select VIDEOBUF2_DMA_CONTIG > > > ---help--- > > > > > > > This was discussed in detail here: > > http://marc.info/?t=140198692500001&r=1&w=2 > > Direct dependency from a staging driver to mach-omap2 driver is not > > something we'd like, right? > > So it was decided to just leave ARM allmodconfig broken? > > Why not at least do this instead? > > 8<---- > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 2001 > From: Arnd Bergmann <arnd@arndb.de> > Date: Tue, 21 Jan 2014 09:32:43 +0100 > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > of which can be loadable modules. This causes build failures > if we want the camera driver to be built-in. > > This can be solved by turning the option into "tristate", > which unfortunately causes another problem, because the > driver incorrectly calls a platform-internal interface > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > Instead, this patch just forbids the invalid configurations > and ensures that the driver can only be built if all its > dependencies are built-in. Makes sense to me if the media people are OK with this: Acked-by: Tony Lindgren <tony@atomide.com> > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig > index 78b0fba..8afc6fe 100644 > --- a/drivers/staging/media/omap4iss/Kconfig > +++ b/drivers/staging/media/omap4iss/Kconfig > @@ -1,6 +1,6 @@ > config VIDEO_OMAP4 > bool "OMAP 4 Camera support" > - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > + depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 > select VIDEOBUF2_DMA_CONTIG > ---help--- > Driver for an OMAP 4 ISS controller. > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Arnd, On Wednesday 11 June 2014 16:49:31 Arnd Bergmann wrote: > On Wednesday 11 June 2014 09:42:04 Nishanth Menon wrote: > > On 06/11/2014 09:35 AM, Arnd Bergmann wrote: > > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > > > of which can be loadable modules. This causes build failures > > > if we want the camera driver to be built-in. > > > > > > This can be solved by turning the option into "tristate", > > > which unfortunately causes another problem, because the > > > driver incorrectly calls a platform-internal interface > > > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > > To work around that, we can export those symbols, but > > > that isn't really the correct solution, as we should not > > > have dependencies on platform code this way. > > > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > > --- > > > This is one of just two patches we currently need to get > > > 'make allmodconfig' to build again on ARM. > > > > > > diff --git a/arch/arm/mach-omap2/control.c > > > b/arch/arm/mach-omap2/control.c > > > index 751f354..05d2d98 100644 > > > --- a/arch/arm/mach-omap2/control.c > > > +++ b/arch/arm/mach-omap2/control.c > > > @@ -190,11 +190,13 @@ u32 omap4_ctrl_pad_readl(u16 offset) > > > { > > > return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); > > > } > > > +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_readl); > > > > > > void omap4_ctrl_pad_writel(u32 val, u16 offset) > > > { > > > writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); > > > } > > > +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_writel); > > > > > > #ifdef CONFIG_ARCH_OMAP3 > > > > > > diff --git a/drivers/staging/media/omap4iss/Kconfig > > > b/drivers/staging/media/omap4iss/Kconfig index 78b0fba..0c3e3c1 100644 > > > --- a/drivers/staging/media/omap4iss/Kconfig > > > +++ b/drivers/staging/media/omap4iss/Kconfig > > > @@ -1,5 +1,5 @@ > > > config VIDEO_OMAP4 > > > - bool "OMAP 4 Camera support" > > > + tristate "OMAP 4 Camera support" > > > depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > > > select VIDEOBUF2_DMA_CONTIG > > > ---help--- > > > > This was discussed in detail here: > > http://marc.info/?t=140198692500001&r=1&w=2 > > Direct dependency from a staging driver to mach-omap2 driver is not > > something we'd like, right? > > So it was decided to just leave ARM allmodconfig broken? > > Why not at least do this instead? > > 8<---- > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 2001 > From: Arnd Bergmann <arnd@arndb.de> > Date: Tue, 21 Jan 2014 09:32:43 +0100 > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > of which can be loadable modules. This causes build failures > if we want the camera driver to be built-in. > > This can be solved by turning the option into "tristate", > which unfortunately causes another problem, because the > driver incorrectly calls a platform-internal interface > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > Instead, this patch just forbids the invalid configurations > and ensures that the driver can only be built if all its > dependencies are built-in. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Should I take this in my tree for v3.17 or would you like to fast-track it ? > diff --git a/drivers/staging/media/omap4iss/Kconfig > b/drivers/staging/media/omap4iss/Kconfig index 78b0fba..8afc6fe 100644 > --- a/drivers/staging/media/omap4iss/Kconfig > +++ b/drivers/staging/media/omap4iss/Kconfig > @@ -1,6 +1,6 @@ > config VIDEO_OMAP4 > bool "OMAP 4 Camera support" > - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > + depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 > select VIDEOBUF2_DMA_CONTIG > ---help--- > Driver for an OMAP 4 ISS controller.
On Thursday 12 June 2014 16:12:17 Laurent Pinchart wrote: > > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 2001 > > From: Arnd Bergmann <arnd@arndb.de> > > Date: Tue, 21 Jan 2014 09:32:43 +0100 > > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > > of which can be loadable modules. This causes build failures > > if we want the camera driver to be built-in. > > > > This can be solved by turning the option into "tristate", > > which unfortunately causes another problem, because the > > driver incorrectly calls a platform-internal interface > > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > > > Instead, this patch just forbids the invalid configurations > > and ensures that the driver can only be built if all its > > dependencies are built-in. > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Should I take this in my tree for v3.17 or would you like to fast-track it ? > I'd actually like to see it in 3.15 as a stable backport if possible, but definitely in 3.16. What is the normal path for staging/media but fix patches? Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12, 2014 at 04:15:32PM +0200, Arnd Bergmann wrote: > On Thursday 12 June 2014 16:12:17 Laurent Pinchart wrote: > > > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 2001 > > > From: Arnd Bergmann <arnd@arndb.de> > > > Date: Tue, 21 Jan 2014 09:32:43 +0100 > > > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > > > > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > > > of which can be loadable modules. This causes build failures > > > if we want the camera driver to be built-in. > > > > > > This can be solved by turning the option into "tristate", > > > which unfortunately causes another problem, because the > > > driver incorrectly calls a platform-internal interface > > > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > > > > > Instead, this patch just forbids the invalid configurations > > > and ensures that the driver can only be built if all its > > > dependencies are built-in. > > > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > Should I take this in my tree for v3.17 or would you like to fast-track it ? > > > > I'd actually like to see it in 3.15 as a stable backport if possible, It's not stable material, sorry. > but definitely in 3.16. What is the normal path for staging/media > but fix patches? Through Mauro's tree. greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 12 June 2014 07:25:15 Greg KH wrote: > On Thu, Jun 12, 2014 at 04:15:32PM +0200, Arnd Bergmann wrote: > > On Thursday 12 June 2014 16:12:17 Laurent Pinchart wrote: > > > > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 2001 > > > > From: Arnd Bergmann <arnd@arndb.de> > > > > Date: Tue, 21 Jan 2014 09:32:43 +0100 > > > > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > > > > > > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > > > > of which can be loadable modules. This causes build failures > > > > if we want the camera driver to be built-in. > > > > > > > > This can be solved by turning the option into "tristate", > > > > which unfortunately causes another problem, because the > > > > driver incorrectly calls a platform-internal interface > > > > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > > > > > > > Instead, this patch just forbids the invalid configurations > > > > and ensures that the driver can only be built if all its > > > > dependencies are built-in. > > > > > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > > > > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > Should I take this in my tree for v3.17 or would you like to fast-track it ? > > > > > > > I'd actually like to see it in 3.15 as a stable backport if possible, > > It's not stable material, sorry. To clarify, I was talking about second version of the patch, not the original one. It just does this: > config VIDEO_OMAP4 > bool "OMAP 4 Camera support" > - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > + depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 > select VIDEOBUF2_DMA_CONTIG > ---help--- > Driver for an OMAP 4 ISS controller. which enforces that configurations that cannot be compiled will not be selectable in Kconfig, so we can have allmodconfig working. I thought that was ok for -stable. > > but definitely in 3.16. What is the normal path for staging/media > > but fix patches? > > Through Mauro's tree. Ok. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Arnd, On Thursday 12 June 2014 16:28:39 Arnd Bergmann wrote: > On Thursday 12 June 2014 07:25:15 Greg KH wrote: > > On Thu, Jun 12, 2014 at 04:15:32PM +0200, Arnd Bergmann wrote: > > > On Thursday 12 June 2014 16:12:17 Laurent Pinchart wrote: > > > > > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 > > > > > 2001 > > > > > From: Arnd Bergmann <arnd@arndb.de> > > > > > Date: Tue, 21 Jan 2014 09:32:43 +0100 > > > > > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > > > > > > > > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > > > > > of which can be loadable modules. This causes build failures > > > > > if we want the camera driver to be built-in. > > > > > > > > > > This can be solved by turning the option into "tristate", > > > > > which unfortunately causes another problem, because the > > > > > driver incorrectly calls a platform-internal interface > > > > > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > > > > > > > > > Instead, this patch just forbids the invalid configurations > > > > > and ensures that the driver can only be built if all its > > > > > dependencies are built-in. > > > > > > > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > > > > > > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > > > Should I take this in my tree for v3.17 or would you like to > > > > fast-track it ?> > > > > I'd actually like to see it in 3.15 as a stable backport if possible, > > > > It's not stable material, sorry. > > To clarify, I was talking about second version of the patch, > not the original one. It just does this: > > > config VIDEO_OMAP4 > > bool "OMAP 4 Camera support" > > - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > > + depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && > > ARCH_OMAP4 > > select VIDEOBUF2_DMA_CONTIG > > ---help--- > > Driver for an OMAP 4 ISS controller. > > which enforces that configurations that cannot be compiled > will not be selectable in Kconfig, so we can have allmodconfig > working. I thought that was ok for -stable. > > > > but definitely in 3.16. What is the normal path for staging/media > > > but fix patches? > > > > Through Mauro's tree. > > Ok. I've applied the patch to my tree and will send a pull request to Mauro for v3.16 as soon as you reach an agreement with Greg on whether I should add CC: stable or not.
On Thu, Jun 12, 2014 at 04:28:39PM +0200, Arnd Bergmann wrote: > On Thursday 12 June 2014 07:25:15 Greg KH wrote: > > On Thu, Jun 12, 2014 at 04:15:32PM +0200, Arnd Bergmann wrote: > > > On Thursday 12 June 2014 16:12:17 Laurent Pinchart wrote: > > > > > From 3a965f4fd5a6b3ef4a66aa4e7c916cfd34fd5706 Mon Sep 17 00:00:00 2001 > > > > > From: Arnd Bergmann <arnd@arndb.de> > > > > > Date: Tue, 21 Jan 2014 09:32:43 +0100 > > > > > Subject: [PATCH] [media] staging: tighten omap4iss dependencies > > > > > > > > > > The OMAP4 camera support depends on I2C and VIDEO_V4L2, both > > > > > of which can be loadable modules. This causes build failures > > > > > if we want the camera driver to be built-in. > > > > > > > > > > This can be solved by turning the option into "tristate", > > > > > which unfortunately causes another problem, because the > > > > > driver incorrectly calls a platform-internal interface > > > > > for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. > > > > > > > > > > Instead, this patch just forbids the invalid configurations > > > > > and ensures that the driver can only be built if all its > > > > > dependencies are built-in. > > > > > > > > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > > > > > > > Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > > > Should I take this in my tree for v3.17 or would you like to fast-track it ? > > > > > > > > > > I'd actually like to see it in 3.15 as a stable backport if possible, > > > > It's not stable material, sorry. > > To clarify, I was talking about second version of the patch, > not the original one. It just does this: > > > config VIDEO_OMAP4 > > bool "OMAP 4 Camera support" > > - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 > > + depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 > > select VIDEOBUF2_DMA_CONTIG > > ---help--- > > Driver for an OMAP 4 ISS controller. > > which enforces that configurations that cannot be compiled > will not be selectable in Kconfig, so we can have allmodconfig > working. I thought that was ok for -stable. Ah, yes, that one works, sorry, I was thinking of the first one. greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig index 78b0fba..8afc6fe 100644 --- a/drivers/staging/media/omap4iss/Kconfig +++ b/drivers/staging/media/omap4iss/Kconfig @@ -1,6 +1,6 @@ config VIDEO_OMAP4 bool "OMAP 4 Camera support" - depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4 + depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4 select VIDEOBUF2_DMA_CONTIG ---help--- Driver for an OMAP 4 ISS controller.