| Message ID | 1402577077-7835-1-git-send-email-drake@endlessm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello, On 2014-06-12 14:44, Daniel Drake wrote: > This dts adds initial support for the popular ODROID U2/U3 development > boards based on Exynos4412. > > This file comes from larger work by Alban Browaeys, but I removed the > items that aren't immediately working on mainline kernels yet (USB, > HDMI, etc). > > This leaves us with a reasonable starting point for further development: > basic bootup and shutdown works, plus LED, eMMC, SD, and serial. > > Signed-off-by: Daniel Drake <drake@endlessm.com> Thanks for posting, however I have already prepared dts for Odroid X2 and U3 with complete USB support. HDMI needs a few little tweaks, but I hope it can be also merged soon. I'm waiting for v3.16-rc1 to rebase them onto latest mainline and post here. I will check if I can integrate your patch to them. You can check some earlier version in the following git: https://review.tizen.org/git/?p=platform/kernel/linux-3.10.git;a=shortlog;h=refs/heads/tizen > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/exynos4412-odroidu2.dts | 468 ++++++++++++++++++++++++++++++ > 2 files changed, 469 insertions(+) > create mode 100644 arch/arm/boot/dts/exynos4412-odroidu2.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 5986ff6..bd89b23 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ > exynos4210-smdkv310.dtb \ > exynos4210-trats.dtb \ > exynos4210-universal_c210.dtb \ > + exynos4412-odroidu2.dtb \ > exynos4412-odroidx.dtb \ > exynos4412-origen.dtb \ > exynos4412-smdk4412.dtb \ > diff --git a/arch/arm/boot/dts/exynos4412-odroidu2.dts b/arch/arm/boot/dts/exynos4412-odroidu2.dts > new file mode 100644 > index 0000000..a164522 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos4412-odroidu2.dts > @@ -0,0 +1,468 @@ > +/* > + * Hardkernel's Exynos4412 based ODROID-U2 board device tree source > + * > + * Copyright (c) 2013 Alban Browaeys <prahal@yahoo.com> > + * > + * Based on exynos4412-odroidx.dts > + * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com> > + * > + * Based on exynos4412-origen.dts > + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Device tree source file for Hardkernel's ODROID-U2 board which is based on > + * Samsung's Exynos4412 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +/dts-v1/; > +#include "exynos4412.dtsi" > + > +/ { > + model = "Hardkernel ODROID-U2/U3 board based on Exynos4412"; > + compatible = "hardkernel,odroid-u2", "samsung,exynos4412", "samsung,exynos4"; > + > + chosen { > + bootargs = "console=ttySAC1,115200"; > + }; > + > + memory { > + reg = <0x40000000 0x80000000>; > + }; > + > + firmware@0203F000 { > + compatible = "samsung,secure-firmware"; > + reg = <0x0203F000 0x1000>; > + }; > + > + watchdog@10060000 { > + status = "okay"; > + }; > + > + g2d@10800000 { > + status = "okay"; > + }; > + > + fixed-rate-clocks { > + xxti { > + compatible = "samsung,clock-xxti", "fixed-clock"; > + clock-frequency = <0>; > + }; > + > + xusbxti { > + compatible = "samsung,clock-xusbxti", "fixed-clock"; > + clock-frequency = <24000000>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + led1 { > + label = "led1:heart"; > + gpios = <&gpc1 0 1>; > + default-state = "on"; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + mmc@12550000 { > + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8 &sd4_nreset_out>; > + pinctrl-names = "default"; > + vmmc-supply = <&ldo20_reg &ldo22_reg>; > + status = "okay"; > + > + num-slots = <1>; > + supports-highspeed; > + broken-cd; > + keep-power-in-suspend; > + non-removable; > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <1 1>; > + samsung,dw-mshc-ddr-timing = <2 1>; > + samsung,dw-mshc-hwreset-gpio = <&gpk1 2 1>; > + > + slot@0 { > + reg = <0>; > + bus-width = <8>; > + }; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + > + reg_p3v3: p3v3@0 { > + compatible = "regulator-fixed"; > + regulator-name = "p3v3_en"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpa1 1 3>; > + enable-active-high; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + reg_sysvdd: p5v0@1 { > + compatible = "regulator-fixed"; > + regulator-name = "p5v0"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + spkvdd:jack@2 { > + compatible = "regulator-fixed"; > + regulator-name = "spkvdd-supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + vin-supply = <®_sysvdd>; > + }; > + }; > + > + pinctrl@11000000 { > + sd4_nreset_out: sd4-nreset-out { > + samsung,pins = "gpk1-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + > + eint26: ext-int26 { > + samsung,pins = "gpx3-2"; > + samsung,pin-function = <0xf>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > + }; > + > + sdhci@12530000 { > + bus-width = <4>; > + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; > + pinctrl-names = "default"; > + vmmc-supply = <&ldo4_reg &ldo21_reg>; > + status = "okay"; > + }; > + > + serial@13800000 { > + status = "okay"; > + }; > + > + serial@13810000 { > + status = "okay"; > + }; > + > + serial@13820000 { > + status = "okay"; > + }; > + > + serial@13830000 { > + status = "okay"; > + }; > + > + i2c_0: i2c@13860000 { > + pinctrl-0 = <&i2c0_bus>; > + pinctrl-names = "default"; > + status = "okay"; > + > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <400000>; > + > + max77686_pmic@09 { > + compatible = "maxim,max77686"; > + interrupts-extended = <&gpx3 2 1>, <&gpx1 2 1>; > + reg = <0x09>; > + pinctrl-0 = <&eint26>; > + pinctrl-names = "default"; > + #clock-cells = <1>; > + > + voltage-regulators { > + ldo1_reg: ldo1 { > + regulator-compatible = "LDO1"; > + regulator-name = "VDD_ALIVE_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo2_reg: ldo2 { > + regulator-compatible = "LDO2"; > + regulator-name = "VDDQ_M1_2_1.8V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + ldo3_reg: ldo3 { > + regulator-compatible = "LDO3"; > + regulator-name = "VDDQ_EXT_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo4_reg: ldo4 { > + regulator-compatible = "LDO4"; > + regulator-name = "VDDQ_MMC2_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo5_reg: ldo5 { > + regulator-compatible = "LDO5"; > + regulator-name = "VDDQ_MMC1_3_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo6_reg: ldo6 { > + regulator-compatible = "LDO6"; > + regulator-name = "VDD10_MPLL_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo7_reg: ldo7 { > + regulator-compatible = "LDO7"; > + regulator-name = "VDD10_EPLL_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo8_reg: ldo8 { > + regulator-compatible = "LDO8"; > + regulator-name = "VDD10_MIPI_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + ldo9_reg: ldo9 { > + regulator-compatible = "LDO9"; > + regulator-name = "VT_CORE_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo10_reg: ldo10 { > + regulator-compatible = "LDO10"; > + regulator-name = "VDD18_MIPI_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + ldo11_reg: ldo11 { > + regulator-compatible = "LDO11"; > + regulator-name = "VDD18_ABB1_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo12_reg: ldo12 { > + regulator-compatible = "LDO12"; > + regulator-name = "VDD33_USB_3.3V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo13_reg: ldo13 { > + regulator-compatible = "LDO13"; > + regulator-name = "VDDQ_C2C_W_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo14_reg: ldo14 { > + regulator-compatible = "LDO14"; > + regulator-name = "VDD18_ABB0_2_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo15_reg: ldo15 { > + regulator-compatible = "LDO15"; > + regulator-name = "VDD10_HSIC_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo16_reg: ldo16 { > + regulator-compatible = "LDO16"; > + regulator-name = "VDD18_HSIC_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo17_reg: ldo17 { > + regulator-compatible = "LDO17"; > + regulator-name = "VDDQ_CAM_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + ldo18_reg: ldo18 { > + regulator-compatible = "LDO18"; > + regulator-name = "VDDQ_ISP_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo19_reg: ldo19 { > + regulator-compatible = "LDO19"; > + regulator-name = "VT_CAM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo20_reg: ldo20 { > + regulator-compatible = "LDO20"; > + regulator-name = "LDO20_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + ldo21_reg: ldo21 { > + regulator-compatible = "LDO21"; > + regulator-name = "LDO21_3.3V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo22_reg: ldo22 { > + regulator-compatible = "LDO22"; > + regulator-name = "VMEM_VDD_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo23_reg: ldo23 { > + regulator-compatible = "LDO23"; > + regulator-name = "VDD_TOUCH_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo24_reg: ldo24 { > + regulator-compatible = "LDO24"; > + regulator-name = "VDD_TOUCHLED_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo25_reg: ldo25 { > + regulator-compatible = "LDO25"; > + regulator-name = "VDDQ_LCD_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo26_reg: ldo26 { > + regulator-compatible = "LDO26"; > + regulator-name = "VDD_MOTOR_3.0V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + buck1_reg: buck1 { > + regulator-compatible = "BUCK1"; > + regulator-name = "vdd_mif"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck2_reg: buck2 { > + regulator-compatible = "BUCK2"; > + regulator-name = "vdd_arm"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck3_reg: buck3 { > + regulator-compatible = "BUCK3"; > + regulator-name = "vdd_int"; > + regulator-min-microvolt = <1125000>; > + regulator-max-microvolt = <1125000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck4_reg: buck4 { > + regulator-compatible = "BUCK4"; > + regulator-name = "vdd_g3d"; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck5_reg: buck5 { > + regulator-compatible = "BUCK5"; > + regulator-name = "VDDQ_CKEM1_2_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck6_reg: buck6 { > + regulator-compatible = "BUCK6"; > + regulator-name = "BUCK6_1.35V"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + buck7_reg: buck7 { > + regulator-compatible = "BUCK7"; > + regulator-name = "BUCK7_2.0V"; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2000000>; > + regulator-always-on; > + }; > + > + buck8_reg: buck8 { > + regulator-compatible = "BUCK8"; > + regulator-name = "BUCK8_2.8V"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + buck9_reg: buck9 { > + regulator-compatible = "BUCK9"; > + regulator-name = "BUCK9_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + }; > + }; > + }; > +}; Best regards
Hello Marek, since you pointed out HDMI support on the ODROID, I assume you've looked into that. I've posted about some issues with HDMI PHY and mixer some days ago here: http://www.spinics.net/lists/linux-samsung-soc/msg31643.html Tomasz already suggested on IRC to CC some more people, who have worked in that area. Maybe you have an idea what is going wrong there? With best wishes, Tobias -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 12, 2014 at 2:03 PM, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > Thanks for posting, however I have already prepared dts for Odroid X2 > and U3 with complete USB support. HDMI needs a few little tweaks, but I > hope it can be also merged soon. > > I'm waiting for v3.16-rc1 to rebase them onto latest mainline and post > here. I will check if I can integrate your patch to them. Nice, thanks. I took a quick glance at your work and indeed it looks much more complete. I don't think you have anything to add from my patch. Just one request, please be sure to submit this work after -rc1 comes out even if HDMI is not working at first. Too many people have started working on this and then stopped short of actually sending any code upstream. If you CC me on the patches I'll try to help with reviews too. Thanks, Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tobias, On 12.06.2014 15:19, Tobias Jakobi wrote: > Hello Marek, > > since you pointed out HDMI support on the ODROID, I assume you've looked into that. I've posted about some issues with HDMI PHY and mixer some days ago here: > http://www.spinics.net/lists/linux-samsung-soc/msg31643.html > > Tomasz already suggested on IRC to CC some more people, who have worked in that area. Maybe you have an idea what is going wrong there? Empirically we have managed to find that after bypassing the Video Processor and using the Mixer alone [1], LCD0 power domain is no longer needed for HDMI operation. However there is still an issue with power-up and/or -down sequences causing the whole system to hang when trying to power on and off HDMI repeatedly. This is to be investigated yet. [1] This can be achieved by setting .is_vp_enabled of exynos4210_mxr_drv_data to 0, assuming that you have a patch applied which adds appropriate compatible string to mixer_match_types[], pointing to that struct. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff6..bd89b23 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ + exynos4412-odroidu2.dtb \ exynos4412-odroidx.dtb \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ diff --git a/arch/arm/boot/dts/exynos4412-odroidu2.dts b/arch/arm/boot/dts/exynos4412-odroidu2.dts new file mode 100644 index 0000000..a164522 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-odroidu2.dts @@ -0,0 +1,468 @@ +/* + * Hardkernel's Exynos4412 based ODROID-U2 board device tree source + * + * Copyright (c) 2013 Alban Browaeys <prahal@yahoo.com> + * + * Based on exynos4412-odroidx.dts + * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com> + * + * Based on exynos4412-origen.dts + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Hardkernel's ODROID-U2 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412.dtsi" + +/ { + model = "Hardkernel ODROID-U2/U3 board based on Exynos4412"; + compatible = "hardkernel,odroid-u2", "samsung,exynos4412", "samsung,exynos4"; + + chosen { + bootargs = "console=ttySAC1,115200"; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + firmware@0203F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0203F000 0x1000>; + }; + + watchdog@10060000 { + status = "okay"; + }; + + g2d@10800000 { + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "led1:heart"; + gpios = <&gpc1 0 1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + mmc@12550000 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8 &sd4_nreset_out>; + pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &ldo22_reg>; + status = "okay"; + + num-slots = <1>; + supports-highspeed; + broken-cd; + keep-power-in-suspend; + non-removable; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <1 1>; + samsung,dw-mshc-ddr-timing = <2 1>; + samsung,dw-mshc-hwreset-gpio = <&gpk1 2 1>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + + reg_p3v3: p3v3@0 { + compatible = "regulator-fixed"; + regulator-name = "p3v3_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpa1 1 3>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + + reg_sysvdd: p5v0@1 { + compatible = "regulator-fixed"; + regulator-name = "p5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + spkvdd:jack@2 { + compatible = "regulator-fixed"; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sysvdd>; + }; + }; + + pinctrl@11000000 { + sd4_nreset_out: sd4-nreset-out { + samsung,pins = "gpk1-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint26: ext-int26 { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + i2c_0: i2c@13860000 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + + max77686_pmic@09 { + compatible = "maxim,max77686"; + interrupts-extended = <&gpx3 2 1>, <&gpx1 2 1>; + reg = <0x09>; + pinctrl-0 = <&eint26>; + pinctrl-names = "default"; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-compatible = "LDO4"; + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "VDD10_EPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_MIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: ldo9 { + regulator-compatible = "LDO9"; + regulator-name = "VT_CORE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: ldo10 { + regulator-compatible = "LDO10"; + regulator-name = "VDD18_MIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo11_reg: ldo11 { + regulator-compatible = "LDO11"; + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: ldo12 { + regulator-compatible = "LDO12"; + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo13_reg: ldo13 { + regulator-compatible = "LDO13"; + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: ldo14 { + regulator-compatible = "LDO14"; + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: ldo15 { + regulator-compatible = "LDO15"; + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo16_reg: ldo16 { + regulator-compatible = "LDO16"; + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: ldo17 { + regulator-compatible = "LDO17"; + regulator-name = "VDDQ_CAM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo18_reg: ldo18 { + regulator-compatible = "LDO18"; + regulator-name = "VDDQ_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: ldo19 { + regulator-compatible = "LDO19"; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: ldo20 { + regulator-compatible = "LDO20"; + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo21_reg: ldo21 { + regulator-compatible = "LDO21"; + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo22_reg: ldo22 { + regulator-compatible = "LDO22"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo23_reg: ldo23 { + regulator-compatible = "LDO23"; + regulator-name = "VDD_TOUCH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo24_reg: ldo24 { + regulator-compatible = "LDO24"; + regulator-name = "VDD_TOUCHLED_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo25_reg: ldo25 { + regulator-compatible = "LDO25"; + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo26_reg: ldo26 { + regulator-compatible = "LDO26"; + regulator-name = "VDD_MOTOR_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: buck3 { + regulator-compatible = "BUCK3"; + regulator-name = "vdd_int"; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: buck4 { + regulator-compatible = "BUCK4"; + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: buck5 { + regulator-compatible = "BUCK5"; + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: buck6 { + regulator-compatible = "BUCK6"; + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: buck7 { + regulator-compatible = "BUCK7"; + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: buck8 { + regulator-compatible = "BUCK8"; + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: buck9 { + regulator-compatible = "BUCK9"; + regulator-name = "BUCK9_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; +};
This dts adds initial support for the popular ODROID U2/U3 development boards based on Exynos4412. This file comes from larger work by Alban Browaeys, but I removed the items that aren't immediately working on mainline kernels yet (USB, HDMI, etc). This leaves us with a reasonable starting point for further development: basic bootup and shutdown works, plus LED, eMMC, SD, and serial. Signed-off-by: Daniel Drake <drake@endlessm.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos4412-odroidu2.dts | 468 ++++++++++++++++++++++++++++++ 2 files changed, 469 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4412-odroidu2.dts