| Message ID | 1403106200-777-2-git-send-email-balbi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
$subject - ARM: dts: On 06/18/2014 10:43 AM, Felipe Balbi wrote: > by providing phandles to rtc and wdt nodes, we can > let boards enable rtc and wdt as necessary. > > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > arch/arm/boot/dts/am4372.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi > index 49fa596..e3830d4 100644 > --- a/arch/arm/boot/dts/am4372.dtsi > +++ b/arch/arm/boot/dts/am4372.dtsi > @@ -270,7 +270,7 @@ > ti,hwmods = "counter_32k"; > }; > > - rtc@44e3e000 { > + rtc: rtc@44e3e000 { > compatible = "ti,am4372-rtc","ti,da830-rtc"; > reg = <0x44e3e000 0x1000>; > interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH > @@ -279,7 +279,7 @@ > status = "disabled"; > }; > > - wdt@44e35000 { > + wdt: wdt@44e35000 { > compatible = "ti,am4372-wdt","ti,omap3-wdt"; > reg = <0x44e35000 0x1000>; > interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; > we might want to fix up any other similar nodes in dtsi as well, no? examples: cpu@0 dispc@4832a400 Might also be nice to have Fixes: to point out which commit was being fixed, no?
Hi, On Wed, Jun 18, 2014 at 10:55:35AM -0500, Nishanth Menon wrote: > $subject - ARM: dts: > > On 06/18/2014 10:43 AM, Felipe Balbi wrote: > > by providing phandles to rtc and wdt nodes, we can > > let boards enable rtc and wdt as necessary. > > > > Signed-off-by: Felipe Balbi <balbi@ti.com> > > --- > > arch/arm/boot/dts/am4372.dtsi | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi > > index 49fa596..e3830d4 100644 > > --- a/arch/arm/boot/dts/am4372.dtsi > > +++ b/arch/arm/boot/dts/am4372.dtsi > > @@ -270,7 +270,7 @@ > > ti,hwmods = "counter_32k"; > > }; > > > > - rtc@44e3e000 { > > + rtc: rtc@44e3e000 { > > compatible = "ti,am4372-rtc","ti,da830-rtc"; > > reg = <0x44e3e000 0x1000>; > > interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH > > @@ -279,7 +279,7 @@ > > status = "disabled"; > > }; > > > > - wdt@44e35000 { > > + wdt: wdt@44e35000 { > > compatible = "ti,am4372-wdt","ti,omap3-wdt"; > > reg = <0x44e35000 0x1000>; > > interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; > > > we might want to fix up any other similar nodes in dtsi as well, no? > > examples: > cpu@0 and why would you want boards to mess with the cpu node ? > dispc@4832a400 perhaps > Might also be nice to have Fixes: to point out which commit was being > fixed, no? no other board enables those, so I wouldn't consider it a fix.
On 06/18/2014 02:25 PM, Felipe Balbi wrote: > Hi, > > On Wed, Jun 18, 2014 at 10:55:35AM -0500, Nishanth Menon wrote: >> $subject - ARM: dts: >> >> On 06/18/2014 10:43 AM, Felipe Balbi wrote: >>> by providing phandles to rtc and wdt nodes, we can >>> let boards enable rtc and wdt as necessary. >>> >>> Signed-off-by: Felipe Balbi <balbi@ti.com> >>> --- >>> arch/arm/boot/dts/am4372.dtsi | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi >>> index 49fa596..e3830d4 100644 >>> --- a/arch/arm/boot/dts/am4372.dtsi >>> +++ b/arch/arm/boot/dts/am4372.dtsi >>> @@ -270,7 +270,7 @@ >>> ti,hwmods = "counter_32k"; >>> }; >>> >>> - rtc@44e3e000 { >>> + rtc: rtc@44e3e000 { >>> compatible = "ti,am4372-rtc","ti,da830-rtc"; >>> reg = <0x44e3e000 0x1000>; >>> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH >>> @@ -279,7 +279,7 @@ >>> status = "disabled"; >>> }; >>> >>> - wdt@44e35000 { >>> + wdt: wdt@44e35000 { >>> compatible = "ti,am4372-wdt","ti,omap3-wdt"; >>> reg = <0x44e35000 0x1000>; >>> interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; >>> >> we might want to fix up any other similar nodes in dtsi as well, no? >> >> examples: >> cpu@0 > > and why would you want boards to mess with the cpu node ? > cpu-supply = <®ulator>; for cpufreq. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Wed, Jun 18, 2014 at 04:43:28PM -0500, Nishanth Menon wrote: > On 06/18/2014 02:25 PM, Felipe Balbi wrote: > >Hi, > > > >On Wed, Jun 18, 2014 at 10:55:35AM -0500, Nishanth Menon wrote: > >>$subject - ARM: dts: > >> > >>On 06/18/2014 10:43 AM, Felipe Balbi wrote: > >>>by providing phandles to rtc and wdt nodes, we can > >>>let boards enable rtc and wdt as necessary. > >>> > >>>Signed-off-by: Felipe Balbi <balbi@ti.com> > >>>--- > >>> arch/arm/boot/dts/am4372.dtsi | 4 ++-- > >>> 1 file changed, 2 insertions(+), 2 deletions(-) > >>> > >>>diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi > >>>index 49fa596..e3830d4 100644 > >>>--- a/arch/arm/boot/dts/am4372.dtsi > >>>+++ b/arch/arm/boot/dts/am4372.dtsi > >>>@@ -270,7 +270,7 @@ > >>> ti,hwmods = "counter_32k"; > >>> }; > >>> > >>>- rtc@44e3e000 { > >>>+ rtc: rtc@44e3e000 { > >>> compatible = "ti,am4372-rtc","ti,da830-rtc"; > >>> reg = <0x44e3e000 0x1000>; > >>> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH > >>>@@ -279,7 +279,7 @@ > >>> status = "disabled"; > >>> }; > >>> > >>>- wdt@44e35000 { > >>>+ wdt: wdt@44e35000 { > >>> compatible = "ti,am4372-wdt","ti,omap3-wdt"; > >>> reg = <0x44e35000 0x1000>; > >>> interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; > >>> > >>we might want to fix up any other similar nodes in dtsi as well, no? > >> > >>examples: > >>cpu@0 > > > >and why would you want boards to mess with the cpu node ? > > > cpu-supply = <®ulator>; > > for cpufreq. good point, but does thqt even work with AM437x devices in mainline?
On 06/18/2014 04:51 PM, Felipe Balbi wrote: > Hi, > > On Wed, Jun 18, 2014 at 04:43:28PM -0500, Nishanth Menon wrote: >> On 06/18/2014 02:25 PM, Felipe Balbi wrote: >>> Hi, >>> >>> On Wed, Jun 18, 2014 at 10:55:35AM -0500, Nishanth Menon wrote: >>>> $subject - ARM: dts: >>>> >>>> On 06/18/2014 10:43 AM, Felipe Balbi wrote: >>>>> by providing phandles to rtc and wdt nodes, we can >>>>> let boards enable rtc and wdt as necessary. >>>>> >>>>> Signed-off-by: Felipe Balbi <balbi@ti.com> >>>>> --- >>>>> arch/arm/boot/dts/am4372.dtsi | 4 ++-- >>>>> 1 file changed, 2 insertions(+), 2 deletions(-) >>>>> >>>>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi >>>>> index 49fa596..e3830d4 100644 >>>>> --- a/arch/arm/boot/dts/am4372.dtsi >>>>> +++ b/arch/arm/boot/dts/am4372.dtsi >>>>> @@ -270,7 +270,7 @@ >>>>> ti,hwmods = "counter_32k"; >>>>> }; >>>>> >>>>> - rtc@44e3e000 { >>>>> + rtc: rtc@44e3e000 { >>>>> compatible = "ti,am4372-rtc","ti,da830-rtc"; >>>>> reg = <0x44e3e000 0x1000>; >>>>> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH >>>>> @@ -279,7 +279,7 @@ >>>>> status = "disabled"; >>>>> }; >>>>> >>>>> - wdt@44e35000 { >>>>> + wdt: wdt@44e35000 { >>>>> compatible = "ti,am4372-wdt","ti,omap3-wdt"; >>>>> reg = <0x44e35000 0x1000>; >>>>> interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; >>>>> >>>> we might want to fix up any other similar nodes in dtsi as well, no? >>>> >>>> examples: >>>> cpu@0 >>> >>> and why would you want boards to mess with the cpu node ? >>> >> cpu-supply = <®ulator>; >> >> for cpufreq. > > good point, but does thqt even work with AM437x devices in mainline? it will once we are done adding a node. context here being - if you are fixing phandles, please fix them all up.. that is a little nice to do. I wont argue more on this. I will leave it to maintainers. -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 49fa596..e3830d4 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -270,7 +270,7 @@ ti,hwmods = "counter_32k"; }; - rtc@44e3e000 { + rtc: rtc@44e3e000 { compatible = "ti,am4372-rtc","ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH @@ -279,7 +279,7 @@ status = "disabled"; }; - wdt@44e35000 { + wdt: wdt@44e35000 { compatible = "ti,am4372-wdt","ti,omap3-wdt"; reg = <0x44e35000 0x1000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
by providing phandles to rtc and wdt nodes, we can let boards enable rtc and wdt as necessary. Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/am4372.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)