| Message ID | 1402990063-26908-1-git-send-email-alexander.stein@systec-electronic.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Jun 17, 2014 at 09:27:43AM +0200, Alexander Stein wrote: > This adds a new clk which is programmable using different sources and > dividers. > > Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> > --- > I know some (most) of the new lines are larger than 80 characters, but I kept > the same layout as the other lines. > Also lots of the clock sources are not used in linux, so I have given them > a descriptive name though. > > arch/arm/mach-imx/clk-imx35.c | 21 ++++++++++++++++++++- > 1 file changed, 20 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c > index 71c86a2..acf821c 100644 > --- a/arch/arm/mach-imx/clk-imx35.c > +++ b/arch/arm/mach-imx/clk-imx35.c > @@ -49,6 +49,13 @@ static struct clk_onecell_data clk_data; > > static const char *std_sel[] = {"ppll", "arm"}; > static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; > +static const char *clko_select[] = {"ckil", "osc", "osc_audio", "dummy", > + "mpll_075", "mpll", "ppll", "arm", > + "ahb", "ipg", "ipg_per", "usbdiv", > + "esdhc1_div", "ssi1_div_post", "mlb_gate", > + "mshc_gate", "mpll_lock", "csi_div", > + "spdif_div_post", "uart1_gate", "asrc", > + "dptc", "arm_ungated", "nfc_div", "hsp"}; Any new string you add here should have a corresponding clk in clock framework. > > enum mx35_clks { > ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg, > @@ -64,7 +71,7 @@ enum mx35_clks { > rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate, > ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate, > wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate, > - gpu2d_gate, clk_max > + gpu2d_gate, clko_sel, clko_div1, clko_div, clko_gate, clk_max > }; > > static struct clk *clk[clk_max]; > @@ -146,6 +153,10 @@ int __init mx35_clocks_init(void) > clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel)); > clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6); > > + clk[clko_sel] = imx_clk_mux("clko_sel", base + MX35_CCM_COSR, 0, 5, clko_select, ARRAY_SIZE(clko_select)); > + clk[clko_div1] = imx_clk_divider("clko_div1", "clko_sel", base + MX35_CCM_COSR, 6, 1); > + clk[clko_div] = imx_clk_divider("clko_div", "clko_div1", base + MX35_CCM_COSR, 10, 6); > + > clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0); > clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2); > clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4); > @@ -200,6 +211,8 @@ int __init mx35_clocks_init(void) > clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2); > clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4); > > + clk[clko_gate] = imx_clk_gate("clko_gate", "clko_div", base + MX35_CCM_COSR, 5); > + > for (i = 0; i < ARRAY_SIZE(clk); i++) > if (IS_ERR(clk[i])) > pr_err("i.MX35 clk %d: register failed with %ld\n", > @@ -260,6 +273,7 @@ int __init mx35_clocks_init(void) > clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); > clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); > clk_register_clkdev(clk[admux_gate], "audmux", NULL); > + clk_register_clkdev(clk[clko_gate], NULL, "clko.0"); Will this lookup be used somewhere? Shawn > > clk_prepare_enable(clk[spba_gate]); > clk_prepare_enable(clk[gpio1_gate]); > @@ -286,6 +300,11 @@ int __init mx35_clocks_init(void) > mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); > #endif > > + /* > + * Let's initially set up CLKO parent as arm. > + */ > + clk_set_parent(clk[clko_sel], clk[arm]); > + > return 0; > } > > -- > 1.8.5.5 >
On Friday 20 June 2014 16:15:47, Shawn Guo wrote: > On Tue, Jun 17, 2014 at 09:27:43AM +0200, Alexander Stein wrote: > > This adds a new clk which is programmable using different sources and > > dividers. > > > > Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> > > --- > > I know some (most) of the new lines are larger than 80 characters, but I kept > > the same layout as the other lines. > > Also lots of the clock sources are not used in linux, so I have given them > > a descriptive name though. > > > > arch/arm/mach-imx/clk-imx35.c | 21 ++++++++++++++++++++- > > 1 file changed, 20 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c > > index 71c86a2..acf821c 100644 > > --- a/arch/arm/mach-imx/clk-imx35.c > > +++ b/arch/arm/mach-imx/clk-imx35.c > > @@ -49,6 +49,13 @@ static struct clk_onecell_data clk_data; > > > > static const char *std_sel[] = {"ppll", "arm"}; > > static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; > > +static const char *clko_select[] = {"ckil", "osc", "osc_audio", "dummy", > > + "mpll_075", "mpll", "ppll", "arm", > > + "ahb", "ipg", "ipg_per", "usbdiv", > > + "esdhc1_div", "ssi1_div_post", "mlb_gate", > > + "mshc_gate", "mpll_lock", "csi_div", > > + "spdif_div_post", "uart1_gate", "asrc", > > + "dptc", "arm_ungated", "nfc_div", "hsp"}; > > Any new string you add here should have a corresponding clk in clock > framework. Ew, ok... As lots of those clocks are not (yet?) supported in the clock framework this list will contains many "dummy" entries, but well I get your point. > > enum mx35_clks { > > ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg, > > @@ -64,7 +71,7 @@ enum mx35_clks { > > rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate, > > ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate, > > wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate, > > - gpu2d_gate, clk_max > > + gpu2d_gate, clko_sel, clko_div1, clko_div, clko_gate, clk_max > > }; > > > > static struct clk *clk[clk_max]; > > @@ -146,6 +153,10 @@ int __init mx35_clocks_init(void) > > clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel)); > > clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6); > > > > + clk[clko_sel] = imx_clk_mux("clko_sel", base + MX35_CCM_COSR, 0, 5, clko_select, ARRAY_SIZE(clko_select)); > > + clk[clko_div1] = imx_clk_divider("clko_div1", "clko_sel", base + MX35_CCM_COSR, 6, 1); > > + clk[clko_div] = imx_clk_divider("clko_div", "clko_div1", base + MX35_CCM_COSR, 10, 6); > > + > > clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0); > > clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2); > > clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4); > > @@ -200,6 +211,8 @@ int __init mx35_clocks_init(void) > > clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2); > > clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4); > > > > + clk[clko_gate] = imx_clk_gate("clko_gate", "clko_div", base + MX35_CCM_COSR, 5); > > + > > for (i = 0; i < ARRAY_SIZE(clk); i++) > > if (IS_ERR(clk[i])) > > pr_err("i.MX35 clk %d: register failed with %ld\n", > > @@ -260,6 +273,7 @@ int __init mx35_clocks_init(void) > > clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); > > clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); > > clk_register_clkdev(clk[admux_gate], "audmux", NULL); > > + clk_register_clkdev(clk[clko_gate], NULL, "clko.0"); > > Will this lookup be used somewhere? Well, as this is a pretty customizable output clock signal, I think this will only be used in custom board implementation. Or is there any generic driver to configure an arbitrary programmable clock? Alexander
On Mon, Jun 23, 2014 at 08:21:49AM +0200, Alexander Stein wrote: > > > @@ -49,6 +49,13 @@ static struct clk_onecell_data clk_data; > > > > > > static const char *std_sel[] = {"ppll", "arm"}; > > > static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; > > > +static const char *clko_select[] = {"ckil", "osc", "osc_audio", "dummy", > > > + "mpll_075", "mpll", "ppll", "arm", > > > + "ahb", "ipg", "ipg_per", "usbdiv", > > > + "esdhc1_div", "ssi1_div_post", "mlb_gate", > > > + "mshc_gate", "mpll_lock", "csi_div", > > > + "spdif_div_post", "uart1_gate", "asrc", > > > + "dptc", "arm_ungated", "nfc_div", "hsp"}; > > > > Any new string you add here should have a corresponding clk in clock > > framework. > > Ew, ok... As lots of those clocks are not (yet?) supported in the clock framework this list will contains many "dummy" entries, but well I get your point. > Right. Either you do not create the string or you create the clock behind the string together. ... > > > @@ -260,6 +273,7 @@ int __init mx35_clocks_init(void) > > > clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); > > > clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); > > > clk_register_clkdev(clk[admux_gate], "audmux", NULL); > > > + clk_register_clkdev(clk[clko_gate], NULL, "clko.0"); > > > > Will this lookup be used somewhere? > > Well, as this is a pretty customizable output clock signal, I think this will only be used in custom board implementation. Or is there any generic driver to configure an arbitrary programmable clock? > I prefer to add this lookup only when there is an in-tree user for it. Shawn
Hello, On Wednesday 25 June 2014 14:53:03, Shawn Guo wrote: > On Mon, Jun 23, 2014 at 08:21:49AM +0200, Alexander Stein wrote: > > > > @@ -49,6 +49,13 @@ static struct clk_onecell_data clk_data; > > > > > > > > static const char *std_sel[] = {"ppll", "arm"}; > > > > static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; > > > > +static const char *clko_select[] = {"ckil", "osc", "osc_audio", "dummy", > > > > + "mpll_075", "mpll", "ppll", "arm", > > > > + "ahb", "ipg", "ipg_per", "usbdiv", > > > > + "esdhc1_div", "ssi1_div_post", "mlb_gate", > > > > + "mshc_gate", "mpll_lock", "csi_div", > > > > + "spdif_div_post", "uart1_gate", "asrc", > > > > + "dptc", "arm_ungated", "nfc_div", "hsp"}; > > > > > > Any new string you add here should have a corresponding clk in clock > > > framework. > > > > Ew, ok... As lots of those clocks are not (yet?) supported in the clock framework this list will contains many "dummy" entries, but well I get your point. > > > > Right. Either you do not create the string or you create the clock > behind the string together. Ok, I'll recheck. > > > > @@ -260,6 +273,7 @@ int __init mx35_clocks_init(void) > > > > clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); > > > > clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); > > > > clk_register_clkdev(clk[admux_gate], "audmux", NULL); > > > > + clk_register_clkdev(clk[clko_gate], NULL, "clko.0"); > > > > > > Will this lookup be used somewhere? > > > > Well, as this is a pretty customizable output clock signal, I think this will only be used in custom board implementation. Or is there any generic driver to configure an arbitrary programmable clock? > > > > I prefer to add this lookup only when there is an in-tree user for it. Well, the cko (cko1 and cko2) clocks on i.MX6 are also added. Though I can't find any user of that. So why addind it despite that? Best regards, Alexander
On Wed, Jun 25, 2014 at 10:58:12AM +0200, Alexander Stein wrote: > Well, the cko (cko1 and cko2) clocks on i.MX6 are also added. Though > I can't find any user of that. So why addind it despite that? They are definitely used, I've recently added one user to my DT config, and there are other users in the DT configs already present in the kernel tree. Look for <&clks 201> for iMX6.
On Wed, Jun 25, 2014 at 10:58:12AM +0200, Alexander Stein wrote: > > > > > @@ -260,6 +273,7 @@ int __init mx35_clocks_init(void) > > > > > clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); > > > > > clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); > > > > > clk_register_clkdev(clk[admux_gate], "audmux", NULL); > > > > > + clk_register_clkdev(clk[clko_gate], NULL, "clko.0"); > > > > > > > > Will this lookup be used somewhere? > > > > > > Well, as this is a pretty customizable output clock signal, I think this will only be used in custom board implementation. Or is there any generic driver to configure an arbitrary programmable clock? > > > > > > > I prefer to add this lookup only when there is an in-tree user for it. > > Well, the cko (cko1 and cko2) clocks on i.MX6 are also added. Though I can't find any user of that. So why addind it despite that? > To be clear, I'm not talking about the cko clock itself but the lookup to cko, i.e. clk_register_clkdev() of "clko.0". Shawn
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 71c86a2..acf821c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -49,6 +49,13 @@ static struct clk_onecell_data clk_data; static const char *std_sel[] = {"ppll", "arm"}; static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; +static const char *clko_select[] = {"ckil", "osc", "osc_audio", "dummy", + "mpll_075", "mpll", "ppll", "arm", + "ahb", "ipg", "ipg_per", "usbdiv", + "esdhc1_div", "ssi1_div_post", "mlb_gate", + "mshc_gate", "mpll_lock", "csi_div", + "spdif_div_post", "uart1_gate", "asrc", + "dptc", "arm_ungated", "nfc_div", "hsp"}; enum mx35_clks { ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg, @@ -64,7 +71,7 @@ enum mx35_clks { rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate, ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate, wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate, - gpu2d_gate, clk_max + gpu2d_gate, clko_sel, clko_div1, clko_div, clko_gate, clk_max }; static struct clk *clk[clk_max]; @@ -146,6 +153,10 @@ int __init mx35_clocks_init(void) clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel)); clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6); + clk[clko_sel] = imx_clk_mux("clko_sel", base + MX35_CCM_COSR, 0, 5, clko_select, ARRAY_SIZE(clko_select)); + clk[clko_div1] = imx_clk_divider("clko_div1", "clko_sel", base + MX35_CCM_COSR, 6, 1); + clk[clko_div] = imx_clk_divider("clko_div", "clko_div1", base + MX35_CCM_COSR, 10, 6); + clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0); clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2); clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4); @@ -200,6 +211,8 @@ int __init mx35_clocks_init(void) clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2); clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4); + clk[clko_gate] = imx_clk_gate("clko_gate", "clko_div", base + MX35_CCM_COSR, 5); + for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX35 clk %d: register failed with %ld\n", @@ -260,6 +273,7 @@ int __init mx35_clocks_init(void) clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); clk_register_clkdev(clk[admux_gate], "audmux", NULL); + clk_register_clkdev(clk[clko_gate], NULL, "clko.0"); clk_prepare_enable(clk[spba_gate]); clk_prepare_enable(clk[gpio1_gate]); @@ -286,6 +300,11 @@ int __init mx35_clocks_init(void) mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); #endif + /* + * Let's initially set up CLKO parent as arm. + */ + clk_set_parent(clk[clko_sel], clk[arm]); + return 0; }
This adds a new clk which is programmable using different sources and dividers. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> --- I know some (most) of the new lines are larger than 80 characters, but I kept the same layout as the other lines. Also lots of the clock sources are not used in linux, so I have given them a descriptive name though. arch/arm/mach-imx/clk-imx35.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-)