| Message ID | 1403677773-21141-5-git-send-email-ch.naveen@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Naveen, On Wed, Jun 25, 2014 at 8:29 AM, Naveen Krishna Chatradhi <ch.naveen@samsung.com> wrote: > Exynos5420 based Peach PIT board has 4 NTC thermistors to measure > temperatures at various points on the board. > > IIO based ADC becomes the parent and NTC thermistors are the childs, > via the HWMON interface. > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> > Cc: Doug Anderson <dianders@chromium.org> > --- > Changes since v1: > 1. Arranged the ADC node alphabetical > 2. Added "status = "okay"" to the ADC node > > This patch needs > 1. MAX77802 PMIC device tree nodes (for ldo9) > https://www.mail-archive.com/devicetree@vger.kernel.org/msg31430.html > 2. Uses the DT documentation for NTC thermistors updated with vendor-prefix > > This patch set is tested > 1. On Peach PIT board via sysfs entry exposed by hwmon > localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input > 37436 > 36449 > 38560 > 38059 > > 2. Backward compatibility is tested by replacing "murata" with "ntc" > in the dts nodes and running the above test. > > arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts > index b96a66a..19d733d 100644 > --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts > +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts > @@ -101,6 +101,40 @@ > }; > }; > > +&adc { > + status = "okay"; > + vdd-supply = <&ldo9_reg>; > + > + ncp15wb473@3 { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 3>; > + }; > + ncp15wb473@4 { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 4>; > + }; > + ncp15wb473@5 { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 5>; > + }; > + ncp15wb473@6 { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 6>; > + }; > +}; > + > &dp { > status = "okay"; > pinctrl-names = "default"; > -- > 1.7.9.5 > Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Naveen, On Tue, Jun 24, 2014 at 11:29 PM, Naveen Krishna Chatradhi <ch.naveen@samsung.com> wrote: > Exynos5420 based Peach PIT board has 4 NTC thermistors to measure > temperatures at various points on the board. > > IIO based ADC becomes the parent and NTC thermistors are the childs, > via the HWMON interface. > > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> > Cc: Doug Anderson <dianders@chromium.org> > --- > Changes since v1: > 1. Arranged the ADC node alphabetical > 2. Added "status = "okay"" to the ADC node > > This patch needs > 1. MAX77802 PMIC device tree nodes (for ldo9) > https://www.mail-archive.com/devicetree@vger.kernel.org/msg31430.html > 2. Uses the DT documentation for NTC thermistors updated with vendor-prefix > > This patch set is tested > 1. On Peach PIT board via sysfs entry exposed by hwmon > localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input > 37436 > 36449 > 38560 > 38059 > > 2. Backward compatibility is tested by replacing "murata" with "ntc" > in the dts nodes and running the above test. > > arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) Now that Javier has spun his patch, perhaps you can fold the "pi" version in here too? Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Doug, On 26 June 2014 02:10, Doug Anderson <dianders@chromium.org> wrote: > Naveen, > > On Tue, Jun 24, 2014 at 11:29 PM, Naveen Krishna Chatradhi > <ch.naveen@samsung.com> wrote: >> Exynos5420 based Peach PIT board has 4 NTC thermistors to measure >> temperatures at various points on the board. >> >> IIO based ADC becomes the parent and NTC thermistors are the childs, >> via the HWMON interface. >> >> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> >> Cc: Doug Anderson <dianders@chromium.org> >> --- >> Changes since v1: >> 1. Arranged the ADC node alphabetical >> 2. Added "status = "okay"" to the ADC node >> >> This patch needs >> 1. MAX77802 PMIC device tree nodes (for ldo9) >> https://www.mail-archive.com/devicetree@vger.kernel.org/msg31430.html >> 2. Uses the DT documentation for NTC thermistors updated with vendor-prefix >> >> This patch set is tested >> 1. On Peach PIT board via sysfs entry exposed by hwmon >> localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input >> 37436 >> 36449 >> 38560 >> 38059 >> >> 2. Backward compatibility is tested by replacing "murata" with "ntc" >> in the dts nodes and running the above test. >> >> arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++ >> 1 file changed, 34 insertions(+) > > Now that Javier has spun his patch, perhaps you can fold the "pi" > version in here too? Sure, thanks for the information. Snow also needs the adc nodes. Will try to implement an adc fragment for PIT, PI and Snow. > > Reviewed-by: Doug Anderson <dianders@chromium.org> > Tested-by: Doug Anderson <dianders@chromium.org>
Hello Doug, Kukjin, On 26 June 2014 11:46, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote: > Doug, > > On 26 June 2014 02:10, Doug Anderson <dianders@chromium.org> wrote: >> Naveen, >> >> On Tue, Jun 24, 2014 at 11:29 PM, Naveen Krishna Chatradhi >> <ch.naveen@samsung.com> wrote: >>> Exynos5420 based Peach PIT board has 4 NTC thermistors to measure >>> temperatures at various points on the board. >>> >>> IIO based ADC becomes the parent and NTC thermistors are the childs, >>> via the HWMON interface. >>> >>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> >>> Cc: Doug Anderson <dianders@chromium.org> >>> --- >>> Changes since v1: >>> 1. Arranged the ADC node alphabetical >>> 2. Added "status = "okay"" to the ADC node >>> >>> This patch needs >>> 1. MAX77802 PMIC device tree nodes (for ldo9) >>> https://www.mail-archive.com/devicetree@vger.kernel.org/msg31430.html >>> 2. Uses the DT documentation for NTC thermistors updated with vendor-prefix >>> >>> This patch set is tested >>> 1. On Peach PIT board via sysfs entry exposed by hwmon >>> localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input >>> 37436 >>> 36449 >>> 38560 >>> 38059 >>> >>> 2. Backward compatibility is tested by replacing "murata" with "ntc" >>> in the dts nodes and running the above test. >>> >>> arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++ >>> 1 file changed, 34 insertions(+) >> >> Now that Javier has spun his patch, perhaps you can fold the "pi" >> version in here too? > > Sure, thanks for the information. > > Snow also needs the adc nodes. > Will try to implement an adc fragment for PIT, PI and Snow. I just found out https://lkml.org/lkml/2013/3/27/453 Adding ADC based Thermistor nodes to Exynos5250-snow.dts din't make it in. > >> >> Reviewed-by: Doug Anderson <dianders@chromium.org> >> Tested-by: Doug Anderson <dianders@chromium.org> > > > > -- > Shine bright, > (: Nav :)
Hello Kukjin, On 26 June 2014 11:46, Naveen Krishna Ch <naveenkrishna.ch@gmail.com> wrote: > Doug, > > On 26 June 2014 02:10, Doug Anderson <dianders@chromium.org> wrote: >> Naveen, >> >> On Tue, Jun 24, 2014 at 11:29 PM, Naveen Krishna Chatradhi >> <ch.naveen@samsung.com> wrote: >>> Exynos5420 based Peach PIT board has 4 NTC thermistors to measure >>> temperatures at various points on the board. >>> >>> IIO based ADC becomes the parent and NTC thermistors are the childs, >>> via the HWMON interface. >>> >>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> >>> Cc: Doug Anderson <dianders@chromium.org> >>> --- >>> Changes since v1: >>> 1. Arranged the ADC node alphabetical >>> 2. Added "status = "okay"" to the ADC node >>> >>> This patch needs >>> 1. MAX77802 PMIC device tree nodes (for ldo9) >>> https://www.mail-archive.com/devicetree@vger.kernel.org/msg31430.html >>> 2. Uses the DT documentation for NTC thermistors updated with vendor-prefix >>> >>> This patch set is tested >>> 1. On Peach PIT board via sysfs entry exposed by hwmon >>> localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input >>> 37436 >>> 36449 >>> 38560 >>> 38059 >>> >>> 2. Backward compatibility is tested by replacing "murata" with "ntc" >>> in the dts nodes and running the above test. >>> >>> arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++ >>> 1 file changed, 34 insertions(+) >> >> Now that Javier has spun his patch, perhaps you can fold the "pi" >> version in here too? > > Sure, thanks for the information. > > Snow also needs the adc nodes. > Will try to implement an adc fragment for PIT, PI and Snow. I've a plan to create a common file (cros-exynos-peach.dts) for exynos5420-peach-pit.dts and exynos5800-peach-pi.dts And add the ADC nodes directly into that. In favor of the above, can you abandon the following patches 1. [PATCH 3/4 v2] ARM: DTS: use new compatible string for thermistors in trats2 http://www.spinics.net/lists/linux-samsung-soc/msg33037.html 2. [PATCH 4/4 v2] ARM: DTS: Add NTC thermistor nodes to Exynos5420 based Peach_PIT http://www.spinics.net/lists/linux-samsung-soc/msg33038.html > >> >> Reviewed-by: Doug Anderson <dianders@chromium.org> >> Tested-by: Doug Anderson <dianders@chromium.org> > > > > -- > Shine bright, > (: Nav :)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index b96a66a..19d733d 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -101,6 +101,40 @@ }; }; +&adc { + status = "okay"; + vdd-supply = <&ldo9_reg>; + + ncp15wb473@3 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; + ncp15wb473@4 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + ncp15wb473@5 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 5>; + }; + ncp15wb473@6 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 6>; + }; +}; + &dp { status = "okay"; pinctrl-names = "default";
Exynos5420 based Peach PIT board has 4 NTC thermistors to measure temperatures at various points on the board. IIO based ADC becomes the parent and NTC thermistors are the childs, via the HWMON interface. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Cc: Doug Anderson <dianders@chromium.org> --- Changes since v1: 1. Arranged the ADC node alphabetical 2. Added "status = "okay"" to the ADC node This patch needs 1. MAX77802 PMIC device tree nodes (for ldo9) https://www.mail-archive.com/devicetree@vger.kernel.org/msg31430.html 2. Uses the DT documentation for NTC thermistors updated with vendor-prefix This patch set is tested 1. On Peach PIT board via sysfs entry exposed by hwmon localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input 37436 36449 38560 38059 2. Backward compatibility is tested by replacing "murata" with "ntc" in the dts nodes and running the above test. arch/arm/boot/dts/exynos5420-peach-pit.dts | 34 ++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)