| Message ID | 1404307763-30557-4-git-send-email-peter.ujfalusi@ti.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
At Wed, 2 Jul 2014 16:29:21 +0300, Peter Ujfalusi wrote: > > Based on the dma_slave_caps's addr_widths queried from the dma driver > prepare the hw.formats mask to include only formats which is supported by > the DMA engine. > In case the dma driver does not implement the slave_caps the default > assumption is that it supports 1, 2 and 4 bytes widths. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > --- > sound/soc/soc-generic-dmaengine-pcm.c | 26 +++++++++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) > > diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c > index 5bace124ef43..c295e1754d1a 100644 > --- a/sound/soc/soc-generic-dmaengine-pcm.c > +++ b/sound/soc/soc-generic-dmaengine-pcm.c > @@ -119,7 +119,10 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea > struct snd_dmaengine_dai_dma_data *dma_data; > struct dma_slave_caps dma_caps; > struct snd_pcm_hardware hw; > - int ret; > + u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | > + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | > + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); > + int i, ret; > > if (pcm->config && pcm->config->pcm_hardware) > return snd_soc_set_runtime_hwparams(substream, > @@ -146,6 +149,27 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea > hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME; > if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT) > hw.info |= SNDRV_PCM_INFO_BATCH; > + > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) > + addr_widths = dma_caps.dstn_addr_widths; > + else > + addr_widths = dma_caps.src_addr_widths; > + } > + > + /* > + * Prepare formats mask for valid/allowed sample types. If the dma does > + * not have support for the given physical word size, it needs to be > + * masked out so user space can not use the format which produces > + * corrupted audio. > + * In case the dma driver does not implement the slave_caps the default > + * assumption is that it supports 1, 2 and 4 bytes widths. > + */ > + for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) { > + int bits = snd_pcm_format_physical_width(i); Better to add a negative value check. Some formats return -EINVAL. > + > + /* Enable only samples with DMA supported physical widths */ > + if (addr_widths & BIT(bits / 8)) Just nitpicking: Using BIT() for 32bit int isn't always a wise choice since BIT() is defined as unsigned long. This is a generic problem, though, as we see many codes using BIT() wrongly (and thus get compiler warnings on 64bit machines). We should introduce a new macro for 32bit int... Takashi -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/02/2014 03:47 PM, Takashi Iwai wrote: [...] >> + /* >> + * Prepare formats mask for valid/allowed sample types. If the dma does >> + * not have support for the given physical word size, it needs to be >> + * masked out so user space can not use the format which produces >> + * corrupted audio. >> + * In case the dma driver does not implement the slave_caps the default >> + * assumption is that it supports 1, 2 and 4 bytes widths. >> + */ >> + for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) { >> + int bits = snd_pcm_format_physical_width(i); > > Better to add a negative value check. Some formats return -EINVAL. > So what should we do with those formats? Not support them? >> + >> + /* Enable only samples with DMA supported physical widths */ >> + if (addr_widths & BIT(bits / 8)) > > Just nitpicking: Using BIT() for 32bit int isn't always a wise choice > since BIT() is defined as unsigned long. This is a generic problem, > though, as we see many codes using BIT() wrongly (and thus get > compiler warnings on 64bit machines). We should introduce a new macro > for 32bit int... -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
At Wed, 02 Jul 2014 16:10:09 +0200, Lars-Peter Clausen wrote: > > On 07/02/2014 03:47 PM, Takashi Iwai wrote: > [...] > >> + /* > >> + * Prepare formats mask for valid/allowed sample types. If the dma does > >> + * not have support for the given physical word size, it needs to be > >> + * masked out so user space can not use the format which produces > >> + * corrupted audio. > >> + * In case the dma driver does not implement the slave_caps the default > >> + * assumption is that it supports 1, 2 and 4 bytes widths. > >> + */ > >> + for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) { > >> + int bits = snd_pcm_format_physical_width(i); > > > > Better to add a negative value check. Some formats return -EINVAL. > > > > So what should we do with those formats? Not support them? Yes, these are special formats that can't be handled generically. Takashi -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/02/2014 04:12 PM, Takashi Iwai wrote: > At Wed, 02 Jul 2014 16:10:09 +0200, > Lars-Peter Clausen wrote: >> >> On 07/02/2014 03:47 PM, Takashi Iwai wrote: >> [...] >>>> + /* >>>> + * Prepare formats mask for valid/allowed sample types. If the dma does >>>> + * not have support for the given physical word size, it needs to be >>>> + * masked out so user space can not use the format which produces >>>> + * corrupted audio. >>>> + * In case the dma driver does not implement the slave_caps the default >>>> + * assumption is that it supports 1, 2 and 4 bytes widths. >>>> + */ >>>> + for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) { >>>> + int bits = snd_pcm_format_physical_width(i); >>> >>> Better to add a negative value check. Some formats return -EINVAL. >>> >> >> So what should we do with those formats? Not support them? > > Yes, these are special formats that can't be handled generically. > Looking through the list in pcm_misc.c there are also some formats where the physical width is not a multiple of 8. We should probably also skip those. - Lars -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
At Wed, 02 Jul 2014 16:13:59 +0200, Lars-Peter Clausen wrote: > > On 07/02/2014 04:12 PM, Takashi Iwai wrote: > > At Wed, 02 Jul 2014 16:10:09 +0200, > > Lars-Peter Clausen wrote: > >> > >> On 07/02/2014 03:47 PM, Takashi Iwai wrote: > >> [...] > >>>> + /* > >>>> + * Prepare formats mask for valid/allowed sample types. If the dma does > >>>> + * not have support for the given physical word size, it needs to be > >>>> + * masked out so user space can not use the format which produces > >>>> + * corrupted audio. > >>>> + * In case the dma driver does not implement the slave_caps the default > >>>> + * assumption is that it supports 1, 2 and 4 bytes widths. > >>>> + */ > >>>> + for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) { > >>>> + int bits = snd_pcm_format_physical_width(i); > >>> > >>> Better to add a negative value check. Some formats return -EINVAL. > >>> > >> > >> So what should we do with those formats? Not support them? > > > > Yes, these are special formats that can't be handled generically. > > > > Looking through the list in pcm_misc.c there are also some formats where the > physical width is not a multiple of 8. We should probably also skip those. Right, ADPCM and G723 are such ones. Takashi -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 5bace124ef43..c295e1754d1a 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -119,7 +119,10 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea struct snd_dmaengine_dai_dma_data *dma_data; struct dma_slave_caps dma_caps; struct snd_pcm_hardware hw; - int ret; + u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); + int i, ret; if (pcm->config && pcm->config->pcm_hardware) return snd_soc_set_runtime_hwparams(substream, @@ -146,6 +149,27 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME; if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT) hw.info |= SNDRV_PCM_INFO_BATCH; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + addr_widths = dma_caps.dstn_addr_widths; + else + addr_widths = dma_caps.src_addr_widths; + } + + /* + * Prepare formats mask for valid/allowed sample types. If the dma does + * not have support for the given physical word size, it needs to be + * masked out so user space can not use the format which produces + * corrupted audio. + * In case the dma driver does not implement the slave_caps the default + * assumption is that it supports 1, 2 and 4 bytes widths. + */ + for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) { + int bits = snd_pcm_format_physical_width(i); + + /* Enable only samples with DMA supported physical widths */ + if (addr_widths & BIT(bits / 8)) + hw.formats |= (1LL << i); } return snd_soc_set_runtime_hwparams(substream, &hw);
Based on the dma_slave_caps's addr_widths queried from the dma driver prepare the hw.formats mask to include only formats which is supported by the DMA engine. In case the dma driver does not implement the slave_caps the default assumption is that it supports 1, 2 and 4 bytes widths. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- sound/soc/soc-generic-dmaengine-pcm.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)